Scribd
Upload
19 views1 page

Low Hydrogen C-Mn Steel Electrode

The document describes the SUPABASE 60 C-Mn steel covered electrode, classified as AWS A/SFA 5.1 E 6018, designed for high tensile strength steel applications. It features low hydrogen properties, high deposition rates, and is suitable for various welding positions, primarily used in repairs and heavy structures. The document includes details on chemical composition, mechanical properties, and packing data for different electrode sizes.

Uploaded by

achapagain.ramanconstruction
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views1 page

Low Hydrogen C-Mn Steel Electrode

The document describes the SUPABASE 60 C-Mn steel covered electrode, classified as AWS A/SFA 5.1 E 6018, designed for high tensile strength steel applications. It features low hydrogen properties, high deposition rates, and is suitable for various welding positions, primarily used in repairs and heavy structures. The document includes details on chemical composition, mechanical properties, and packing data for different electrode sizes.

Uploaded by

achapagain.ramanconstruction
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SUPABASE 60

C-Mn STEEL (Low Hydrogen)

Covered Electrode For 450 MPa High Tensile Strength Steel


CLASSIFICATION : AWS A/SFA 5.1

E 6018

KEY FEATURES :

• Basic coated electrode • High deposition rate


• Low hydrogen iron powder type • Radiographic weld quality
• Medium penetration • All position welding except vertical down

WELDING POSITION : AC (70 OCV)/ DCEP

TYPICAL APPLICATIONS :

• Repairs and tie-ins in oil and gas transport • Bridges, Pipe lines, Penstocks
pipe lines • Joining IS 2002, 2062 steels
• Heavy structures subject to dynamic loading
• Ship building, Storage tanks

REDRYING CONDITION : 300°C for 1 hr (Also available in vacuum packed condition)

CHEMICAL COMPOSITION OF UNDILUTED WELD METAL, Wt % :


C Mn Si S P
Typical 0.03 max 0.6 max 0.4 max 0.015 0.025 max
Specification 0.025 0.45 0.35 0.01 0.02

MECHANICAL PROPERTIES OF ALL WELD METAL :


YS at 0.2% CVN Impact at
Condition UTS, MPa EL%
offset, MPa -30°C
Typical 430 min 330 min 22 min 27 min
As Welded
Specification 475 390 27 50

Hardness, 3 Layer: 200 BHN max Diffusible H2 Content: <5 ml/100 gm

PARAMETERS - PACKING DATA :

Ø x L, mm Amperage, A Carton/Box

2.5 x 350 60-90 4


3.15 x 450 100-130 4
4.0 x 450 140-180 4
5.0 x 450 180-240 4

PASSION FOR WELDING SINCE 1951 www.adorwelding.com

17

You might also like