Edition 1.

Label
Etikettenspender
dispensers HSHS/VS
and VS
Made in Germany
Label dispensers - Model overview

Two dispensing directions

Two versions are available so as to
ensure that the labels can be removed
properly for every use.

al
nt
izo
r
ho

vertical
A
HS Horizontal dispensing direction VS Vertical dispensing direction
A for label rolls with bottom A for label rolls with top leading
leading print image print image

Peel off the label upwards from its Peel off the label forward from its upper
edge and stick it to the product from the
bottom edge and stick it to the product.
A
shortest distance possible.
Particularly suitable for larger labels as the
adhesive side is already directed to the
product.

Two operation panels

Basic version With operation panel

Label feed Label counter from 0 - 9,999
• automatically after removal Label feed
of the label • slow / fast
• after pressing the push button or
• automatically after removal
of the label or
• by an external signal
Three widths of material for HS and VS on the rear side of device

1.1 Pictured: HS 60+ 1.2 Pictured: HS 120+ 1.3 Pictured: HS 180+

8- 6 20-
5m 120 80 -
m 180
m m mm

2
Easy operation
and precise label dispensing
for a great price
Every label size can be
dispensed easily using the HS
and VS dispensers.
The labels can be stamped
or cut without any space in- 1 +
between.
You can use any outside shape
whether cornered or round.
Transparent material can
also be dispensed.

B 4-
18 m
m

A 5-5
5 mm

1 Operation panel 3 4 5
Use the operation panel to select
various operating modes.
This allows setting the feed supply
rate to either "slow" or "fast".
Labels are fed automatically after
removal, by pressing a control key or Accessories
upon an external signal.
A counter indicates how many labels 2.1 2.2
have already been removed.

2 Label sensor
For round labels, the sensor will be
set to the label's A apex.
You can adjust the pre-dispense
height B to between 4 and 18 mm.

3 Label brake
This puts the base material under
tension so as to ensure that the
labels will be dispensed safely. It can
be swivelled away easily when the
material is changed.

4 Liner rewinder
Simply insert and clamp the backing
tape immediately behind the peel-off Battery pack HS/VS 120 Brake for fanfold labels
edge. It is wound up completely by To allow mobile labelling at every place The brake is used to tightly guide and
the strong motor. where you do not have any socket outlet precisely print fanfold material.
for power supply.
5 Roll holder HS and VS allow dispensing more than
The label rolls are guided by the 5,000 labels using a single battery
stable roll retainer. charge.

3
Technical data
Common technical data HS VS with operation panel "+"
Dispensing direction Horizontal dispensing direction Vertical dispensing direction
Label orientation - print image bottom leading top leading
Labels on rolls, standard or die cut, fan-folded optional
Materials paper, textiles, plastics also transparent
Feed supply rate up to mm/sec 200 100 / 200
Label roll: outside diameter up to mm 200
core diameter mm 38 - 76
weight max. kg 4
winding direction outside or inside
Rewinder
Liner outside diameter up to mm 155
Label sensor
Scanning leading edge of label
Distance to leading edge mm A mm 5 - 55
Pre-dispense B mm 4 - 18
Operation panel
Device indicator "ON“ green LED LED and label counter "ON“
Error red LED Label counter, flashing
Selector switch label feed automatic – 
or on demand
Control button with label feed on demand – 
Selector switch feed supply rate – slow / fast
LCD display label counter – 0 - 9999
Control button reset label counter – 
Display dispensing via external signal – 
Connections
Peripheral connection for
peel-off on demand via external signal – 
Inlet connector for non-heating apparatus Power supply
Power switch On / Off

Operating data HS and VS mobile

Power supply 100 - 240 V ~ 50/60 Hz 16,5 - 25 VDC
Power consumption Standby <5 W / typical 30 W / max. 100 W
Temperature / humidity: operation + 5 - 40°C / 10 - 85% not condensing
storage + 0 - 60°C / 20 - 80% not condensing
transport – 25 - 60°C / 20 - 80% not condensing
Noise level < 60 dB
Approvals CE, FCC Class A, ICES-3, cULus

Device specific dimensions HS 60 and VS 60 HS 120 and VS 120 HS 180+ and VS180+
Width of labels including liner mm mm 8 - 65 20 - 120 80 - 180
Height of labels one-wide mm 5 - 300 8 - 600 20 - 600
multi-wide mm 5 - 110 8 - 110 20 - 110
Device dimensions
Height x depth without material mm 250 x 360 250 x 360 250 x 360
Width mm 180 230 300
Weight kg 3.3 3.6 4.0

All information on scopes of delivery, design and technical specifications correspond to the date of the printing. Subject to change.
The data provided in the catalog do not represent any warranty or guarantee. For current data see website www.cab.de/en/hsvs

Delivery program
Label width incl. Dispensing direction with
Art. no. Device Type Basic version
liner mm horizontal vertical operation panel "+"
5542511 Label dispenser VS 60  
5542501 Label dispenser VS 60+  
1.1 8 - 65
5542510 Label dispenser HS 60  
5542500 Label dispenser HS 60+  
5542095 Label dispenser VS 120  
5542195 Label dispenser VS 120+  
1.2 20 - 120
5542075 Label dispenser HS 120  
5542175 Label dispenser HS 120+  
5542503 Label dispenser VS 180+  – 
1.3 80 - 180
5542502 Label dispenser HS 180+  – 
xxxxxxx.600 Label dispenser xx 120 mobile
2.1 20 - 120    
5542630 Battery pack HS/VS 120
5542098 Brake for fanfold labels 60 HS/VS 600    
2.2 5542099 Brake for fanfold labels 120 HS/VS 120    
5542069 Brake for fanfold labels 180 HS/VS 180    

4
Overview of cab products

Label printers Label printers Label printers Label printers

MACH1, MACH2 EOS 2 EOS 5 MACH 4S

Label printers Label printers Label printers Label printers

SQUIX 2 SQUIX 4 SQUIX 6.3 SQUIX 8.3

Label printers Label printers Print and apply systems Print and apply systems
XD Q double-sided XC Q two-colored HERMES Q Hermes C two-colored

Tube labeling systems Print modules Labels and ribbons Label software
AXON 1 PX Q cablabel S3

Label dispensers Labeling heads Marking lasers Laser marking systems

HS, VS IXOR XENO 4

For product information see www.cab.de/en

5
 1 Headquarters and fabrication
in Germany

2 to 7 International
subsidiaries

There are further 820

distribution and service partners 1
in more than 80 countries. 2

4 6

Europe America Asia Africa

Germany USA Taiwan South Africa

cab Produkttechnik cab Technology, Inc. cab Technology Co., Ltd. cab Technology (Pty) Ltd.
GmbH & Co KG 21 Alpha Road, Suite 200 16F-1, No. 700, Jhong Jheng Rd 8 Fabriek Street
Wilhelm-Schickard-Str. 14 Chelmsford, MA 01824 Junghe, Taipei 23552 Strijdom Park
76131 Karlsruhe phone +1 978 250 8321 phone +886 (02) 8227 3966 Randburg 2169
phone +49 721 6626 0 fax +1 978 256 9564 fax +886 (02) 8227 3566 phone +27 11 886 3580
fax +49 721 6626 129 info.us@cab.de info.asia@cab.de fax +27 11 789 3913
info@cab.de www.cab.de/us www.cab.de/tw info.za@cab.de
www.cab.de www.cab.de/za
Latin America China
France Alejandro Balmaceda cab (Shanghai) Trading Co., Ltd.
cab Technologies S.à.r.l. Hacienda Jurica Pte 1615 Room 908, Building D
2a Rue de la Moder Colonial de Valle No. 999, Jin Zhong Rd
Z.A. Nord du Val de Moder 32553 Juárez, Mexico Shanghai 200335
67350 Niedermodern phone +52 656 682 4301 phone +86 (021) 6236 3161
phone +33 388 722501 a.balmaceda@cab.de fax +86 (021) 6236 3162
fax +33 388 722502 www.cab.de/es info.cn@cab.de
info.fr@cab.de www.cab.de/cn
www.cab.de/fr
Singapore
cab Singapore Pte. Ltd.
59 Ubi Avenue 1 #04-05
Singapore 408938
Status: 03/2023

phone +65 6931 9099

info.asia@cab.de
www.cab.de/en

This document and any translations hereof are the property of cab Produkttechnik GmbH & Co KG. © cab/9009654
The replication, processing, reproduction or distribution in whole or in parts requires our prior written consent.