Scribd
Upload
16 views1 page

Vickers Hardness Tester Moiz

The Vickers Hardness Tester (Model: VM-50) is designed for measuring the hardness of a wide range of metallic materials, from soft metals to hard steel, with consistent results regardless of load. It features a motorized loading and unloading cycle, a built-in projection screen for accurate measurements, and is compliant with IS: 1754 and ISO 6507-2 standards. The machine is fully automatic, robustly constructed, and includes various standard accessories for enhanced functionality.

Uploaded by

Moin Mulla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views1 page

Vickers Hardness Tester Moiz

The Vickers Hardness Tester (Model: VM-50) is designed for measuring the hardness of a wide range of metallic materials, from soft metals to hard steel, with consistent results regardless of load. It features a motorized loading and unloading cycle, a built-in projection screen for accurate measurements, and is compliant with IS: 1754 and ISO 6507-2 standards. The machine is fully automatic, robustly constructed, and includes various standard accessories for enhanced functionality.

Uploaded by

Moin Mulla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Vickers Hardness Tester (Model: VM-50)

Features:
• Testing range is very wide, from soft metal such as lead, upto the
hardest, like hardeness steel.
• Same hardness number is obtained on the same specimen, regardless
of the load applied.
• The indication is tiny and allows testing of a precision finished part.
• Loading and unloading cycle is motorised.
• Thin sheet metal is perfectly tested because the load applied is very
small.
• Built-in projection screen to get accurate results.

Specifications :
Moiz' Vickers Hardness Tester is a simple and accurate means to
produce and measure the diamond indentation.
These testers are suitable for measuring the hardness of precision
metallic parts with wide testing range from soft to hard and their
accurate results are widely acclaimed. These testers strictly conform to
IS : 1754 and ISO 6507-2. Number of special acceessories are available
on request and as per special requirement.
Construction :
The robust machine frame is designed to accommodate the high
precision loading system and an optical projection screen.Specimen is
placed on a testing table. The test cycle is fully automatic. The accurate
load is applied on a diamond penetrator by means of a lever and weights. After a specific lapse
of time, the load is removed automatically.The objective is indexed with the test piece and the
diamond indentation is projected on the measuring
screen. The diagonals of the indentation can be Technical Data :Test 5, 10, 20, 30,
measured by means of the micrometer screw of the Loads 50 kgf
projection screen. Optical Magnification 70 X
Standard Accessories : Optical Measuring 0.1 to 1.0
1. Standard Text Block 1 No. Range (mm)
2. Diamond Penetrator 1 No. Maximum Test Height 200
(mm)
3. Weights 1 Set
Scale Least Count 0.001
4. Flat Anvil 1 No. (mm)
5. Vee-Type anvil (Small & Big) 1 No. each Throat Depth (mm) 135
6. Spanners 1 set Machine Dimension L 585 x W 290
(mm) x H 860
7. Electronic Cord 1 No.
Weight (approx) 70 kg
8. Instruction Manual 1 Book Power Supply 220 VAC,
50Hz, 1-Phase

You might also like