Display mode: VGA

AMERICAN STYLE ROULETTE PLUS

LINKING SYSTEM

User’s Manual

International Amusement Machine Co., Ltd.

 AMERICAN STYLE ROULETTE PLUS
LINKING SYSTEM II﹑TOUCH CALIBRATION
1. MONITOR: 31.5Khz (VGA).
2. Buttons, touch panel, PS/2 Keyboard and PS/2 Mouse are available
Ⅰ﹑HOW TO PLAY operation interfaces. Operating controls are methods selectable by
1. Double zero (00) american style roulette game with Linking Mystery PCB DIPSW3 pin1 and pin 2.
Jackpot. 3. If operation interface is set to touch-panel, please setup touch-panel as
2. Server-Client ba sed linking system for multiplayer, max link up to 16 followed:
roulette machines. A. Power down.
B. Connect Touch-Panel to PCB's RS232.
3. Player may use touch panel and/or press buttons to play. By press C. Set the PCB DIPSW3 pin1 and pin4 to ON then power up.
buttons please press [UP], [DOWN], [LEFT], and [RIGHT] to move D. Touch the red points at the 4 corners on screen. System would then
the pointer, first highlight the desired position, then press [SELECT] to enter the Touch-Panel testing mode.
chose chip amount then [Bet] to place bets. Press [DOUBLE] to E. Touch any position on screen and see if the red point follows your
double the bet money, or [Cancel One], [Cancel All] to remove last or finger touch. If not, please retry the setup procedure from step A.
all chips from the table. The payouts of all bets are listed in the [Help] F. Press “OK” button on screen to complete the procesure.
page. G. Set the PCB DIPSW3 pin 4 back to OFF position.
4. NEIGHBOR BET: bet on any of the numbers located on the H. Setup procedure is O.K., game ready for Touch manipulation.
Racetrack, it will include that number and the two numbers on each 4. This game and PCB are well tested with the Micro Touch touch screen
side of it on the roulette wheel.The total bet for any Neighbor Bet is with SMT3 controller.
five times (x5) the chip value selected. 5. MicroTouch is a trademark of 3M Company, and SMT3 is one of the
controllers of 3M Company.
5. EXTRA BALL BONUS: when the released number match up with
any of the 5 numbers from the Extra Ball Bar, it automatically launch
another ball to increase your chance of winning! Maximum launch up IⅡ、PCB DIP SWITCH3 SETTING
to 5 extra balls ! DIP SW3 1 2 3 4
6. DOUBLE BONUS: when RED ball appears, regular bet get double BUTTONS & PS/2 KEYBOARD OFF OFF
TOUCH ONLY ON OFF
win for any awarded prizes ! OPERATION
PS/2 MOUSE ONLY OFF ON
INTERFACE
7. X3X4X5 BONUS: when GOLDEN ball appears, regular bet get 3-4-5 BUTTONS & TOUCH & PS/2
ON ON
times win for any awarded prizes ! KEYBOARD
DISABLE OFF
DOOR OPEN
8. MYSTERY JACKPOT：Once the ball spinning started, each play ENABLE ON
machine will get assignated a certain number on the Jackpot Box, TOUCH PANEL DISABLE OFF
when the ball lands on the number that match up with the assignated CALIBRATION ENABLE ON
number, player will hit the Mystery Jackpot ! A minimum bet amount *After touch calibration complete, please turn back pin 4 to OFF.
is required to qualify for the Jackpot.
IV﹑MASTER BOARD SYSTEM SETUP
3. Press [UP]--- SCREEN TEST: Press [CANCEL ONE] to exit.
1. Press TEST/SETUP button to enter TEST/SETUP screen:

2. First enter the valid password to be able to access the setup menu:
(Defaulted [UP]→[LEFT]→[SELECT]→[DOWN]→[RIGHT]→ [UP]) 4. Press [DOWN]---I/O TEST: Press [RECORD] and [TEST/SETUP]
button simultaneously to exit.
5. Press [LEFT]---VOLUME ADJUST: Press [RIGHT] button to save
the changes or press [CANCEL ONE] button to exit.
GAME SETUP BET DEFAULT

SETTINGS DEFAULT OPTIONS

1 MAINGAME RATE 97 90- 91-92-93-94-95-96-97-98-99
2 COIN A(BILLA) RATE 1
3 COIN B(BILLB) RATE 1
4 COIN C(BILLC) RATE 10
1-2-4-5-10-20-25-50-75-100-150-200-250-300-
400-500-800-1000-2000-2500-3000-4000-5000
5 KEYIN RATE 100
6 KEYOUT RATE 100
7 KEYOUT OVER REST ZERO-REST
8 SYSTEM LIMIT 500 x MAXBET 100x-200x-300x-400x-500x-1000x-UNLIMITED

50-100-200-250-300-400-500-1000-2000-3000-
9 PAYOUT LIMIT 100
UNLIMITED
1000-5000-10000-20000-30000-40000-50000-
10 CREDIT-IN LIMIT 1000
UNLIMITED
11 PAYOUT RATE FOLLOW COIN A COIN A-COIN B-COIN C
12 BET METER CLICK 1 1-2-4-5-10-20-25-50-75-100-150-200-250-300-
13 WIN METER CLICK 1 400-500-000
6. Press [RIGHT]---GAME SETUP: Press [SELECT] to save the changes 14 METER SPEED 4 TIME/SEC 1-2-4-5-6-8-10-12-15-16-18-20-25-30-40-50
or [CANCEL ONE] button to exit.
15 IN/OUT METER RATE STANDARD STANDARD-1-10-100
16 DEMO MUSIC ENABLE ENABLE-DISABLE
17 COLLECT SPEED NORMAL NORMAL-QUICKLY-MOVE
18 MAXIMUM EACH BET 100 10-20-50-100-200-500-1000-2000
19 MINIMUM EACH BET 1 1-10-50-100
20 LANGUAGE ENGLISH ENGLISH-SPANISH-CHINESE TRD-CHINESE SP
21 BET TIME (SECONDS) 30 15-20-30-45
22 ROULETTE DISPLAY NO NO-YES
23 TOTAL BET FOR JP 10 5-10-20-50-100-200-250-500-1000-2000
24 JACKPOT RANGE MIDDLE LOW-MIDDLE-HIGH
25 SCREEN CREDIT OUT KEYOUT (PRINTER) – PAYOUT(TICKET) - NO ( NO
KEYOUT
BUTTON SCREEN CREDIT OUT BUTTON

*Press SELECT to save, or CANCEL ONE to exit.

*Total Bet for Jackpot: Total bet eligible to hit the Jackpot by a single player
in a single play. 8. By menu press [BET]---GAME PASSWORD: enter the new
password and confirm it, or press [CANCEL ONE] to exit.
MIN BET JACKPOT RANGE TOTAL BET FOR JP
LOW 5
1 MIDDLE 10
HIGH 20
LOW 50
10 MIDDLE 100
HIGH 200
LOW 250
50 MIDDLE 500
HIGH 1000
LOW 500
MIDDLE 1000
100
HIGH 2000
V﹑MASTER BOARD BOOKKEEPING
7. By menu press [SELECT]---TIME SETUP: Press [RIGHT] to save
or press [CANCEL ONE] to exit. 1. Please press RECORD button for game's bookkeeping:
2. Press [UP] for current record: Press [UP] to clear data . 4. Record 1: game in/out statistics:

3. By menu press [DOWN] for TOTAL RECORD. First enter the

5. Pres [UP] for Record 2: prizes statistics:
correct password:
6. Press [UP] for Record 3: number statistics: 8. By menu press [LEFT] for LAST PLAYS registries:

7. Press [UP] for Record 4: Jackpot Recods:

VI﹑MASTER BOARD OUTSIDE
VGA Output Touch-Panel (RS232) DIP-SW3

Connector

RESET SW LINKING DIP-SW4

Reset SW: Switch it when power is OFF to reset the board .
VII﹑MASTER BOARD LAYOUT COMPONENT SIDE A PIN SOLDER SIDE B
1
1. Press buttons: 2
SPEAKER 3 SPEAKER GND
UP 4
UP DOWN LEFT RIGHT SELECT DOWN 5
LEFT 6
RIGHT 7
SELECT 8
BET CANCEL1 9
CANCEL ONE 10
BET 11
12
13
2. PS/2 MOUSE: the Master PCB can be manipulated by computer ATTENDANT 14
mouse or trackball through the PS/2 port. RESET ERROR 15
SELECT 16
DIPSW3-1 DIPSW3-2 DIPSW3-3 DIPSW3-4 DOOR OPEN 17
18
OFF ON OFF OFF 19
RECORD 20 TEST/SETUP
3. PS/2 keyboard (numpad): the Master PCB can be manipulated by 21
GND 22
computer keyboard through the PS/2 port. 23
24 BET METER
25 WIN METER
Num 26
/ * - 27
Lock
CANCEL1 28 BET LAMP
UP LAMP 29
8 DOWN LAMP 30 CANCEL ONE LAMP
7 9 LEFT LAMP 31
UP
+ RIGHT LAMP 32
SELECT LAMP 33
4 5 6 ATTENDANT LAMP 34 JACKPOT LAMP
GND 35 GND
LEFT RIGHT GND 36 GND

1 2 3 COMPONENT SIDE A PIN SOLDER SIDE B

DOWN GND 1 GND
Enter GND 2 GND
+ 5V 3 + 5V
0 .del + 5V 4 + 5V
+ 12V 5 + 12V
BET SELECT 6 + 12V
HOPPER SSR 7
4. Diagram: 8
GND 9 GND
GND 10 GND
VIII﹑BOARD LINKING
1. This roulette game is Master-Slave based serial linking system. 2. Master board ID setting: No need to set the Master board ID, please
Consists of 1 Master board link up to 16 Slave boards through linking keep all pins to the OFF position.
wires (Black wire + 4 color wire). The Master board shows roulette
spinning but not used for game play. The Slave boards must link to the
Master board to be able to work.

Master 3. Slave board ID setting: DIP SWITCH 4

Slave Slave Slave Slave ID: 01 ID: 02 ID: 03 ID: 04

ID: 01 ID: 02 ID: 03 ID: 016

Linking wires: 4 colors wire + Black wire ID: 05 ID: 06 ID: 07 ID: 08

ID: 09 ID: 10 ID:11 ID:12

ID: 13 ID: 14 ID:15 ID:16

**After change the ID numbers should turn off the power to reach new
settings.
IX﹑SLAVE BOARD SYSTEM SETUP 3. Press [DOWN]---I/O TEST: Press [RECORD] and [TEST/SETUP]
1. Press [TEST/SETUP] key to access Slave board settings: buttons simultaneously to exit.

2. Press [UP]--- SCREEN TEST: Press [CANCEL ONE] to exit. 4. Press [LEFT]---VOLUME ADJUST: Press [RIGHT] button to save
the changes and press [CANCEL ONE] button to exit.
 5. Press [SELECT]---TIME SETUP: Press [RIGHT] to save the
changes and press [CANCEL ONE] to exit. 2. Press [UP] for Current Records or [CANCEL ONE] to exit.

X﹑SLAVE BOARD BOOKKEEPING 3. Press [DOWN] for RECORD1 or [CANCEL ONE] to exit.
1. Press [RECORD] key for bookkeeping menu as follow:
4. Press [LEFT] for RECORD2 or [CANCEL ONE] to exit. 6. Press [SELECT] for LAST 5 PLAYS or [CANCEL ONE] to exit.

5. Press [RIGHT] for RECORD 3 or [CANCEL ONE] to exit. 7. Press [BET] for LAST 10 PAYOUTS.
 36
COMPONENT SIDE A SOLDER SIDE B
PIN
XI﹑SLAVE BOARD OUTSIDE 1
VGA Output Touch-Panel (RS232) DIP-SW3 2
SPEAKER 3 SPEAKER GND
UP 4
DOWN 5
LEFT 6
RIGHT 7
SELECT 8
Connector DOUBLE 9
CANCEL ONE 10
BET 11
HELP 12
LAST BET/ CANCELL ALL 13
ATTENDANT 14
RESET ERROR 15
SELECT 16
DOOR OPEN 17
RESET SW LINKING DIP-SW4
COINA 18 KEYIN
Reset SW: Switch it when power is OFF to reset the board. COINB 19 COINC
RECORD 20 TEST/SETUP
PAYOUT (TICKET) 21 KEYOUT
GND 22 HOPPER SW (TICKET)
COIN A METER 23
XII﹑SLAVE BOARD LAYOUT KEYIN METER 24 BET METER
1. Press buttons: COIN B METER 25 WIN METER
COIN C METER 26 PAYOUT (TICKET) LAMP
PAYOUT METER 27
KEYOUT METER(PRINTER) 28 BET LAMP
UP DOWN LEFT RIGHT SELECT
UP LAMP 29 DOUBLE LAMP
DOWN LAMP 30 CANCEL ONE LAMP
LEFT LAMP 31 LAST BET/ C.ALL LAMP
LAST CANCEL RIGHT LAMP 32
PAYOUT HELP BET DOUBLE SELECT LAMP 33 HELP LAMP
BET ONE
ATTENDANT LAMP 34 JACKPOT LAMP
GND 35 GND
GND 36 GND
10
2. PS/2 MOUSE: adjust DIPSW3-2 to the ON position. COMPONENT SIDE A PIN SOLDER SIDE B
DIPSW3-1 DIPSW3-2 DIPSW3-3 DIPSW3-4 GND 1 GND
GND 2 GND
OFF ON OFF OFF + 5V 3 + 5V
+ 5V 4 + 5V
+ 12V 5 + 12V
+ 12V 6 + 12V
3. Diagram HOPPER SSR (TICKET) 7
8
GND 9 GND
GND 10 GND