Scribd
Upload
100 views14 pages

Cabinet Assembly Guide

The document provides detailed installation instructions for assembling a door cabinet, emphasizing the importance of correctly snapping the spring-loaded door shaft into place to avoid loosening. It outlines the steps for assembling various parts, including securing walls, attaching side panels, and installing the door with specific hardware. Additionally, it includes tips for adjusting the cabinet on uneven ground and fixing it to the wall.

Uploaded by

walmartsfm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100 views14 pages

Cabinet Assembly Guide

The document provides detailed installation instructions for assembling a door cabinet, emphasizing the importance of correctly snapping the spring-loaded door shaft into place to avoid loosening. It outlines the steps for assembling various parts, including securing walls, attaching side panels, and installing the door with specific hardware. Additionally, it includes tips for adjusting the cabinet on uneven ground and fixing it to the wall.

Uploaded by

walmartsfm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

Installation Instructions

Caution!
When assembling the door, if the spring-loaded door shaft
do not snap into the holes in the door frame correctly, it may
cause the doors to come loose, please follow the instructions
to assemble the doors correctly.
G

C
D
A
L

L
B
L
F
E L

K
K
J

×2
A×1 B×1 C×1 D×1

E×1 F×1 G×1

H×1

I×1 J×1 K×2 L×5

M×4 N×41 O×4 P×4 Q×20 R×2 S×4 T×2 U×2 V×2 W×2
Standby Application
1 Put the two rear walls together and put four bolts and nuts to hold them in place.

C
D

O×4 P×4

2 Simply overlap each sidewall in the channel of the rear wall and put three screws on each side
to hold them in place. Note that Part A is on the left side and Part B is on the right side.
If they are misplaced, it will affect the assembly.

N×8
3 Snap the three buckles on either side of Part J into the
three holes in both side panels and then push it down
so that it snaps into the bottom of the cabinet.

2
1

N×4

4 When placing Part H, place the notched side facing forward.

H
5

N×4
Snap the buckle on both sides of Part I into the hole in both side

6 panels and push it up so that it snaps into the top of the cabinet.

2
1

N N

N×4
7 Part G has two holes on one side, facing the rear.

N×7
Put the two metal strips K into the bottom frame, taking care that the raised side of Parts K faces

8 the inside of the cabinet and is flush with the bottom of the cabinet when assembled.

The raised gold hardware side on Part K faces


the bottom of the cabinet.

K N

K M

M×4 N×14
9
If the ground is uneven, it can be adjusted by rotating the screw M.
This will fix the situation that the door is not easily opened or closed.

10 The cabinet can be fixed to the wall as needed.

T×2
Put four support clips Q in the four corners of the cabinet, taking care to place them on the same level.

11

Q×20

12

L
L
L
L
Install the door on one side by first installing the door pin R,

13 then by pressing the spring shaft on the top of the door.

If the spring shaft is missing from the door, you can


find the screw W in the hardware package to install it.

F
3
S

R
1

R×1 S×2
If the spring shaft is missing from the door, you can

14 find the screw W in the hardware package to install it.

3
S
E

R×1 S×2
15 Attach the handle U to the door panels and secure them with screws V.

V U

U
V

U×2 V×2

16

You might also like