4/10/2017 AUDIO / VIDEO: ASC SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2017 MY IS200T IS250 IS300 IS350 [10/2016 ]
Last Modified: 03282017 6.7:8.0.40 Doc ID: RM10000000115QW
Model Year Start: 2017 Model: IS200T Prod Date Range: [10/2016 ]
Title: AUDIO / VIDEO: ASC SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2017 MY IS200T IS250 IS300
IS350 [10/2016 ]
HOW TO PROCEED WITH TROUBLESHOOTING
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the ASC system.
*: Use the Techstream.
PROCEDURE
1. VEHICLE BROUGHT TO WORKSHOP
NEXT
2. CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK
NEXT
3. INSPECT BATTERY VOLTAGE
(a) Measure the battery voltage.
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
NEXT
4. INSPECT CAN COMMUNICATION SYSTEM*
https://www.techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType… 1/4
4/10/2017 AUDIO / VIDEO: ASC SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2017 MY IS200T IS250 IS300 IS350 [10/2016 ]
(a) Use the Techstream, check if the CAN communication system is functioning normally.
Click here
RESULT PROCEED TO
CAN communication system DTCs are not output A
CAN communication system DTCs are output B
B GO TO CAN COMMUNICATION SYSTEM
5. CHECK FOR DTC*
(a) Check for DTCs and note any codes that are output.
Click here
Body Electrical > ASC > Trouble Codes
(b) Clear the DTCs.
Click here
Body Electrical > ASC > Clear DTCs
(c) Recheck for DTCs. Try to reproduce the ASC system DTCs by duplicating the conditions indicated by
the DTCs.
Click here
Body Electrical > ASC > Trouble Codes
RESULT PROCEED TO
DTCs are not output A
DTCs are output B
B GO TO DIAGNOSTIC TROUBLE CODE CHART
https://www.techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType… 2/4
4/10/2017 AUDIO / VIDEO: ASC SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2017 MY IS200T IS250 IS300 IS350 [10/2016 ]
6. PROBLEM SYMPTOMS TABLE
(a) Refer to Problem Symptoms Table.
Click here
RESULT PROCEED TO
Fault is not listed in Problem Symptoms Table A
Fault is listed in Problem Symptoms Table B
B GO TO PROBLEM SYMPTOMS TABLE
7. OVERALL ANALYSIS AND TROUBLESHOOTING*
(a) Operation Check
Click here
(b) Terminals of ECU
Click here
(c) Data List / Active Test
Click here
NEXT
8. ADJUST, REPAIR OR REPLACE
NEXT
9. CONFIRMATION TEST
https://www.techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType… 3/4
4/10/2017 AUDIO / VIDEO: ASC SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2017 MY IS200T IS250 IS300 IS350 [10/2016 ]
NEXT END
https://www.techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType… 4/4