NALANDA INSTITUTE OF TECHNOLOGY (NIT)

BHUBANESWAR

1
 MANDATORY DISCLOSURE
(B.TECH, M.TECH, MCA & MBA PROGRAMMES)
Information has been provided by the concerned Institution and the onus of authenticity lies with the
Institution and not on AICTE.
01. NAME OF THE INSTITUTION:
NALANDA INSTITUTE OF TECHNOLOGY (NIT)
Village : CHANDAKA
Taluka : BHUBANESWAR BLOCK
District : KHURDHA
State : ODISHA
Pin Code 751024
STD Code 0674
Phone No. 0674654097

Fax No. 2563835

E-mail : principal@thenalanda.com

02. NAME & ADDRESS OF THE PRINCIPAL:-

Name : Prof (Dr) P. K. SUBUDHI

Address : Nalanda Institute of Technology (NIT)

At: Chandaka
Po: Chandaka
District: Khorda
Pin: 751024
Longitude: 85o46 0 Latitude: 20o 22 0
Telephone No. 9437134933
Fax No. :
Office hour at the Institution : 9AM to 5 PM
E-mail : principal@thenalanda.com
Website : https://www.thenalanda.com/
Nearest Railway Station (dist. in KM): Bhubaneswar- 25KM
03. Type of Institution : Private- Self Financed
Category (1) of the Institution: Non- Minority
2
 Category (2) of the Institution: Co- Ed
04. Name of the Organization running the Institution : BALAJI EDUCATIONAL TRUST

05. Type of the Organization : Trust

Address of the Organization : Balaji Educational Trust
B-117, Forest Park,
Rajendra Vihar,
Bhubaneswar-751009
Registered with : Society
Registration date : 28/10/2006
Website of the Organization : https://www.thenalanda.com/
NAME OF THE AFFILIATING UNIVERSITY:-
Biju Patnaik University of Technology
Address : Chhend Colony, Rourkela, Odisha-769004
Website : www.bput.ac.in
06. Name of Principal : Prof (Dr) P. K. SUBUDHI
Exact Designation : Principal
Phone Number : 9437134933
Fax Number with STD Code :0674 2563835
E-mail : principal@thenalanda.com
07. GOVERNING BOARD MEMBER:
1) Chairman : Mr. Ladi Gopal Rao
2) Secretary : Prof. Marut Kumar Palo
3) Member (Nominee of the Trust) : Mr.Malaya Kumar Padhi
4) Member (Nominee of the Regional Committee of AICTE): Prof.(Dr) Mrutyunjaya Panda,
Professor, Utkal University.
5) Member (Nominee of the Affiliating Body/ University): Prof.(Dr) Arunanshu Mohapatra, Asso.
Prof., BPUT, Rourkela
6) Member (Nominee of the State Govt.): Prof.(Dr) P.K. Patra, Professor, CET, Bhubaneswar
7) Member- Secretary: Prof (Dr) P. K. SUBUDHI, Ph.D Principal, NIT, Bhubaneswar
8) Member - (Nominated by Balaji Educational Trust, Bhubaneswar) Educationist, Bhubaneswar :
Dr. Bibhudendu Pati, Professor, Chairman, PG Council RD University.

9) Member - (Staff Representative- Women) :Smt. Meenakshi Mohanty, Asst. Prof., Nalanada
Institute of Technology, Bhubaneswar
3
 10) Member - (Staff Representative- Male) :Prof (Dr.) Shakti Prasanna Jena, Professor Nalanada
Institute of Technology, Bhubaneswar

08. ACADEMIC ADVISORY BODY:

1) Prof (Dr) P. K. SUBUDHI, Principal
2) Prof (Dr) S.P. Jena, HOD(ME)
3) Prof (Dr) S.K.Dash,HOD (EE)
4) Prof (Dr) M.K.Biswal, HOD (CE)
IV. GOVERNANCE:-
i) Member of the Board and their brief background
BALAJI EDUCATIONAL TRUST
1) Chairman : Mr. Ladi Gopal Rao
B-117, Forest Park, Rajendra Vihar, Bhubaneswar-751009
2) Secretary: Prof. Marut Kumar Palo
B-117, Forest Park, Rajendra Vihar, Bhubaneswar-751009

ii) Frequency of the Board Meetings and Academic Advisory body:- Twice an Year
iii) Organizational chart and Process:- Enclosed in Annexure-I
iv) Nature and Extent of involvement of faculty and students in academic affairs, Improvements:-
01) Academic Information System (AIS) is installed for developing and delivering teaching materials
in academic affairs.
02) State of Art Technology is installed for conducting class to enhance the quality of teaching.
03) Visuals and teaching aids on important courses, containing lectures delivered by eminent
Professors are procured for the students.
v) Mechanism/ norms & procedure for democratic/ good Governance:-
Under the guidance of Trustees, Governing Council, Academic, Advisory Body, the day- to
day operations of NIT
members with individual responsibility.
vi) Student Feedback on Institutional Governance/ faculty Performance:-
Wise Feedback system, regular faculty development program & faculty appraisal helps for the
assessment of the performance of the faculty members.
vii) Grievance redressed mechanism of faculty, staff and students:-

Principal and a separate grievance cell meeting has been conducted on weekly basis to discuss the
various day to day issues.
4
 PROGRAMMES:-
(i) Name of the Programs Approved by the AICTE:-
Bachelor of Technology in
1) Civil Engineering (CE)
2) Computer Science & Engineering (CSE)
3) Computer Science & Technology (CST)
4) Electrical Engineering (EE)
5) Mechanical Engineering (ME)
Post Graduate Courses
1) Master of Computer Application
2) Master of Business Administration ( Finance Management)
3) Master of Business Administration ( Marketing Management)
4) Master of Business Administration ( Human Resource Management)
5) M. Tech in Computer Science & Engineering
6) M. Tech in Thermal Engineering
(ii) Name of the Programs Accredited by the AICTE: B.Tech, MBA, MCA, M.Tech.
(iii) For each Program the following details are given:
A) B.Tech:
Name : Bachelor of Technology
Number of Seats : 420 per year
Duration : 4 Years
Cut of mark/rank for admission during the last three years : Centralized counseling conducted by
OJEE, Odisha and JEE (Main)
Fee : 71,000/- (Per Year)
Placement facilities : Yes
Campus Placement in last three Years :860
Years with Minimum Salary : 2.2 Lakh per Annum
Maximum Salary and : 7.8 Lakh per Annum
Average Salary : 3.4 Lakh per Annum

B) MBA
Name : Master of Business Administration
Number of Seats : 300 (per Year)
Duration : 2 Years
5
 Cut of Mark/ Rank for admission during the last three years : Centralized Counseling conducted by
(Qualified Students from OJEE/ AIEEE)
Fees :70,000/- (Per Year)
Placement Facilities : Yes
Campus Placement in last three year with 674
Minimum Salary : 3.80 Lakh per Annum
Maximum Salary : 5.75 Lakh per Annum
Average Salary : 4.2 Lakh per Annum

C) M.TECH:-
Name : Master of Technology
Number of Seats 54
Duration : 2 Years
Cut of Mark/ Rank for admission during the last three years : Centralized Counseling conducted by
OJEE
Fees : 78,000/- (Per Year)
Placement Facilities : Yes
Campus Placement in last three year with 14
Minimum Salary : 3.78 Lakh per Annum
Maximum Salary : 7.6 Lakh per Annum
Average Salary : 4.2 Lakh per Annum
Name and duration of Programme(s) have affiliation/ collaboration with Foreign University(s)/ Institution(s)
and being run in the same campus along with status of their AICTE approval. If there is foreign collaboration,
give the following details.
Note: - None of our Programme(s) having affiliating/ collaboration with Foreign University(s)/ Institution(s)
and none of other programme(s) being run in the same campus along with status of AICTE.

b) Details of the Foreign Institution/ University:- NA

c) For each Collaborative/ affiliated programme give the following: NA
d) Whether the collaborative programme is approved by AICTE? If not whether the Domestic/ Foreign
Institution has applied to AICTE for approval as required under notification no. 37-3/Legal/2005 dated 16th
May, 2005: NA
VI. FACULTY:-

6
 (i) Branch wise list of faculty members:-
No. of Permanent Faculty 148
Visiting Faculty : NIL
Adjunct Faculty : NIL
Guest Faculty : NIL
Permanent Faculty: Student Ratio: 1:20
(ii) Number of faculty employed (E) and left (L) during the last three years:-
2021-22 2022-23 2023-24
E L E L E L
11 5 9 4 8 6

VII. PROFILE OF PRINCIPAL WITH QUALIFICATION, TOTAL EXPERIENCE, AGE AND

DURATION OF EMPLOYMENT AT THE INSTITUTE CONCERNED:-
(i) Name : Prof (Dr) P. K. SUBUDHI
(ii) Date of Birth : 14.02.1965
Age : 58 yrs
Academic Qualification (with field of specialization):-
B. Tech in Electronic & Communication Engineering
M. Tech in Communication System Engg.
Ph. D in Electronics Science

Life Member of Indian Society of Technical Education,

FIE (IE) .
Details of Experience (Academic/ Industrial):-
Teaching : 36 years+
Industry : 2 years
Research : 20 years
Area of specialization : Opto-electronics Device
Subject Teaching at PG Level : Radar & TV, Microwave, IPR
No. of Paper published : National Journals (42 Nos.)
International Journals (11 Nos.)
Projects carried out 2
Technology Transfer -
Research Publications 52
7
 Date of appointment in present institution : 16.02.2024
Duration of employment at the institute concerned : Two months & Continuing
(iii) or each faculty give a page covering:
Note: - Enclosed in Annexure-II (separate sheet for each faculty in department wise as per format
given)

VIII. FEES:-
(i) Details of fee, as approved by State fee Committee, for the Institution:-
For B. Tech (First Year):-
Tuition Fees 71,000/-
Transport Fees 14,400
Caution Money (Refundable) 1,000
Total
For M. Tech (First Year):-
Tuition Fees 78,000
Transport Fees 14,400
Caution Money (Refundable) 1,000
Total

For MCA (First Year):-

Tuition Fees 70,000
Transport Fees 14,400
Caution Money (Refundable) 1,000
Total
For MBA (First Year):-
Tuition Fees 70,000
Transport Fees 14,400
Caution Money (Refundable) 1,000
Total
Note:- The College has its own hostel for boys and girls in campus
(ii) Time scheduled for payment of fee for the entire program:-
Institute is providing the following two options for payment of fees.
(i) Onetime payment at the beginning of the academic year
Or
8
 (ii) Before the commencement of each Semester.

(iii) Number of scholarship offered by the Institute, duration and amount:-

Sl. No. Name of Scholarship Duration Amount
01 BALAJI EDUCATIONAL Each Year Rs. 15,000/-
TRUST Scholarship
(iv) Criteria for fee waivers/ Scholarship:-
Annual Income of the parents must be less than 8 lakhs p.a. 5% of the total intake of each branch can be
filled up by TFW scheme. Selection will be as per the secured ranks in the Joint Entrance Examinations.
(v) Estimated cost of boarding and lodging in hostels:- Rs. 55,000/- p.a +1000/- caution money ( Two
Installments.)
IX. ADMISSION:-
(i) Number of seats sanctioned with the year of approval:-
File No. with date of first approval: F. No: 760-82/(NDEG)/ET/2007/01) dt. 06/07/2007
(ii) Number of students admitted under various categories each year in the last three years:-

2023-2024 2022-2023 2021-2022 2020-2021

Actu Sanc
Sanct Actu al Sanct Actu
al adm Sancti Actual tione d
ioned admi ioned al
Cou ission oned admis intake
intake ssion intake admi
rses intake si on
ssion
Civil Engineering 60 22 60 42 60 44 60 51
UG Computer Science & Engg 150 180 150 182 150 15 150 150
8
(Full
Computer Science & 60 65 60 71 - - - -
Time)
Technology
Electrical Engg 60 26 60 42 60 27 60 26
Mechanical Engg. 90 63 90 81 150 71 150 86
M.Tech (CS) 18 04 18 05 18 18 18 18
PG(Ful
l Time) M.Tech (Thermal) 18 02 18 04 18 05 18 15
PG(Full MBA (FM) 60 70 60 82 60 61 60 59
Time) MBA (HRM) 120 94 120 100 60 60 60 58
MBA (MM) 120 76 120 36 60 60 60 56
MCA 180 106 180 155 - - - -

Number of applications received during last two years for admission under Management Quota and
number admitted:-
Admission has been made strictly through central counseling of OJEE, Odisha. No management
seats are permitted to take admission.

9
 X. ADMISSION PROCEDURE:-
(i) Mention the admission test being followed, name and address of Test Agency and its URL
(website):-
JEE (Main) conducted by National Testing Agency established by Ministry of Education, Govt. of India,
and Website: jeemain.nta.nic.in
OJEE (Joint Entrance Examination, Odisha), OJEE, Complex, BPUT, Gandamunda, Bhubaneswar, Odisha,
and Website: odishajee.com, ojee.nic.in
(ii) Number of seats allotted to different Test Qualified candidates separately [CET (State conducted
test/ University tests)/ Associated conducted test]:-
All the seats are filled up through counseling process by OJEE, Odisha.
(iii) Calendar for admission against management/ vacant seats:-
a) Last date for request for applications:
As per the guideline of admission rules/ procedure prescribed by Odisha joint Entrance Examination,
Odisha
b) Last date for submission of application:
As per the guideline of admission rules/ procedure prescribed by Odisha joint Entrance Examination,
Odisha
c) Date of announcing final results:
As per the guideline of admission rules/ procedure prescribed by Odisha joint Entrance Examination,
Odisha
d) Release of admission list (Main list and waiting list should be announced on the same day):
As per the guideline of admission rules/ procedure prescribed by Odisha joint Entrance Examination,
Odisha
e) Date for acceptance by the candidate (time given should in no case be less than 15 days):
As per the guideline of admission rules/ procedure prescribed by Odisha joint Entrance Examination,
Odisha.
f) Last date for closing of admission:
As per the guideline of admission rules/ procedure prescribed by Odisha joint Entrance Examination,
Odisha
g) Stating of the Academic session: (As per Academic Calendar of BPUT, Odisha)
1st week of July of every year for existing students, 3rd week of August of every year for newly admitted
students.
h) The waiting list should be activated only on the expiry of date of main list:
As per the guideline of admission rules/ procedure prescribed by Odisha joint Entrance Examination,
10
 Odisha
i) The policy of refund of the fee, in case of withdrawal, should be clearly notified:
The Institute is refunding the fees after receiving seat cancellation letter from the student/parent and the
same is communicated to the university as per the guidelines of OJEE, Odisha
XI. CRITERIA AND WEIGHTAGES FOR ADMISSION:-
(i) Describe each criteria with its respective weightages i.e. Admission Test, marks in qualifying
examination etc:-
The Institute follows the guidelines of admission rules/ Procedure prescribed by Odisha Joint
Entrance Examination, Odisha for all courses.
(ii) Mention the minimum level of acceptance, if any:-
The Institute follows the guidelines of admission rules/ Procedure prescribed by Odisha Joint
Entrance Examination, Odisha for all courses.
(iii) Mention the cut-off levels of percentage 7 percentile scores of the candidates in the admission
test for the last three years:
Not applicable
(As the admission are through central counseling JEE, Odisha)
(iv) Display marks scored in Test etc. and in aggregate for all candidates who were admitted: Not
applicable
As the admissions are through central counseling of OJEE, Odisha
XII. APPLICATION FORM:-
(i) Downloadable application form, with online submission possibilities:-
The Institute follows the guidelines of admission rules/ Procedure prescribed by Odisha Joint
Entrance Examination, Odisha for all courses.

XIII. LIST OF APPLICANTS:-

The Institute follows the guidelines of admission rules/ Procedure prescribed by Odisha Joint
Entrance Examination, Odisha for all courses.
XIV. RESULTS OF ADMISSION UNDER MANAGEMENT SEAT/VACANT SEATS:-
(i) OJEE, Odisha publish the list of students allotted to the Institute in different courses. The allotted
students report to the Institute before the deadlines prescribed by OJEE, Odisha.
(ii) After the counseling process, the Institute accepts application from new candidates for admission in
different streams against vacant seats (If any)
(iii) The admission of the candidates applied against the vacant seats will be duly confirmed by OJEE,
Odisha as per the schedule.

11
XV. INFORMATION ON INFRASTRUCTURE AND OTHER RESOURCES AVAILABLE:-
(i) LIBRARY
a) Number of Library books/Titles/ Journals available-
Total volume available-29004
Total Titles available-4586

b) List of online National/ International Journals subscribed:

National/International Journals- 154
c) E- Library Facilities- Yes
(ii) LABORATORY:- Details of Laboratories & Workshops

NAME OF THE
SL. NAME OF THE
LABORATORY/WO MAJOR EQUIPMENT
NO. COURSE
RKSHOP
430 no.s Desktop with 10 Intel dual Core Due
1 Computer Science Computer Centre
Processor, 160 GB HDD, 1GB RAM, 2.8 GHz
1) DC register power supply unit 04 nos
2) CRO 20 Mhz 06 nos
Electronics & Basic Electronics
3) Trainer kits for diode, rectifier, FET gate etc. 14
2 Communication Analog Electronics
nos
Engg Engg.
4) Function generator 05 nos
5) Accessories
1) Voltmeter 08 nos
2) Squirrel cage induction motor -02 nos
3) Ammeter 08 nos
4) Wattmeter 07 nos
Electrical engg Basic Electrical
3 5) DOL starter 02 no
Network Device Lab
6) Varriac 01 nos
7) M.G. set 01 nos
8) Fan motor 01 nos
9) Loading Rheostat 06 nos

1) Welding machine 03 nos

2) Milling machine -01
3) TIG welding machine 02
4) Drilling machine
Workshop, Drawing 5) Shaping machine (Shaper) 01
4 Mechanical Engg. 6) Bench grinding machine 2nos
Hall
7) Lathe machine 3 nos
8) Power hacksaw machine-01
9) 3jawchuck for lathe machine 03

Drawing Tables- 60nos

12
 1) Bar pendulum 03 nos
2) Ultrasonic Interferometer 03nos
3) Newtons ring apparatus 02 nos
4) Grating with spectrometer 02 no
5) Na-vapor lamp with spectrometer - 02 nos
6) apparatus 02 nos
5 Physics Physics Lab 7) Rigidity apparatus 03 nos
8) apparatus 02 nos
9) Surface tension app 02 nos
10) B.J.T. app -02 nos
11) P.N. junction app -02 nos
12) Sonometer app 02 nos
13) Hot- tirover- 01 nos

1) Photo electric colorimeter 02 sets

2) PH meter 03 sets
3) Single pan balance 02 nos
4) Double pan balance 02 nos
6 Chemistry Chemistry Lab
5) Redwood Viscometer 02 nos
6) Pensky- closed cup flashpoint apparatus
02 nos
7) Distilled water plant 01 no

1) Desktop 25 nos
2) Video camera 01 no
3) L.C.D 01 no
7 English Language Lab 4) Communicate 01 no
5) Presentation & Public speak 01
6) Cassettes CIEFL -03
7) Cassettes from BCI

1) 8085 microprocessor Kit

8 Electronics Lab Microprocessor Lab
2) Stepper Motor

13
 1) 8085 Microprocessor Trainer (Micro-85.LC)
2) Channel DAC, Interface Board (VBMB-002)
3) Stepper Motor controller with (VBMB-013ª)
4) Generate square wave on all line of 8255 with
different frequencies, Mode-0, Mode-1, BSR mode
operation of 8255 VBMB-008.
5) 8085 Microprocessor Trainer Kit Model (cicro-85
lcd, Micro85 EBLCD.
6) Study of stepper motor and its operation(stepper
motor controller)VBMB 013ª
Electrical Engg
7) Study of Traffic Light controller(Traffic light
9 ACT LAB./M.P. LAB
control systems) TRAF
8) Elevator Simulator interface(VBMB-022)
9) 8051 Microcontroller CMCS Family
Microcontroller Trainer(Micro-
10) Thermometer Kit
11) ACL-02, Amplitude Receiver Kit.
12) ACL-03, FM Tx Kit
13) ACL-04, FM Rx Kit
14) Filter/Noise
15) Sampling Reconstruction Kit.
16) DCL-03, PCM kit

1) Resistance of different values.

2) Transistors.
3) FETs.
4) Connecting wares.
Electrical Engg
5) Soldering Irons.
10 AEC Lab
6) ICs.
7) 4-Bit Binary Ripple Counter [DB-14]
8) BNC to BNC Cable [BNC].
9) BNC to Crocodile Cable (BNC-CRO).
10) Multimeter (VC97)

1) Binary order / Subs tractor. [DB-08].

2) Multiplexer/De multiplexer. [DB-10]
3) Flip flops. [DB-11].
4) Shift Register [DB-12].
Electrical Engg 5) 4-BIT Synchronous Binary Counter.
11 DEC Lab 6) FG-02 2Mhz. Function Generator with frequency
Counter.
7) DMM-10 3 ¾ Digital Low cost Handelled
Multimeter.
8) DSO - 025C1 - 0316, 0390
25 Mhz. 100 MS/s Col

14
 1) 2-Pole MCB 20ª- 2nos.
2) 3 Pole MCB 10ª-01 no.
3) 3- Pole MCB 16ª-01 no.
4) D.O.L. Strarter For 3Hp SQIM-01 no.
5) Rectifier Unit-80ª, Variable Type)-220 Vpc. 01
Set.
6) Ramson DC Shunt Motor 5 Hp Coupled 3Kva
Alter motor- 01 Set.
7) Ramson DC Shunt motor 5Hp, coupled 3 KvA
Alter Motor.- 01 Set.
8) Control panel for synchronization Panel 01 Set.
9) Field Regulador 600*600- 04 no., Field
Regulador 600*400 02 no.
10) Digital Techno meter 3 no.
11) Panel frame me1 -3, Motor-1 4 no.
12) Mg BASE-3, Motor BASE-1 4 no.
Electrical Engg 13) Ramson DC Shunt Motor 5Hp coupled with DC
12 E. M. Lab
shunt Generador 2 KW.- 01Set.
14) Ramson-SCIM 5HP.- 01 no.
15) Varivolt 3-Phase variac 15ª (closed)- 02 no.
16) Transformer 3/3KVA. 415/120V/120V
(closed).- 01 no.
17) Control Panel for MG set- 01 no.
18) Control Panel for Alternator- 02 no.
19) Control Panel so. Cage.Ind.Motor- 01 no.
20) AC Voltmeter 150/300/600 V.- 7 no.
21) AC Ameter-1/2ª-01 no.
22) AC Ameter-5/10ª-05 no.
23) AC Ameter-5/10/25ª- 01 no.
24) AC Ameter-1/3/10ª-01 no.
25) DC Voltmeter-300V-08 no.
26) DC Ameter-10/20ª- 03 no.
27) VPF(Wattmeter)2.5/5ª 150/300/600v.-03 no.
28) LPF(Wattmeter)2.5/5ª-75/150/300V.
1) Thermal conductivity of composite slab
2) Surface emissivity apparatus
3) Parallel and counter flow heat exchanger
apparatus
4) FIN-PIN Apparatus
5) Gear Oil Pump Test Rig
Heat Transfer 6) Cut Sectional Working model of Transmission
13 Mechanical Engg.
Laboratory system
7) Centrifugal Compressor
8) Heat Transfer Coefficient in Natural Convection
9) Critical Heat Flux Apparatus

15
 1) Bernaulli s Apparatus
2) Bourdon Tube Pressure Gauge
3) Metacentric height measurement apparatus
4) Venturimeter / Oriffice meter
5) Centrifugal Pump
Fluid Mechanics &
6) Reciprocating Pump
14 Mechanical Engg. Hydraulic Machines
7) Francis Turbine
Laboratory
8) Pelton Turbine
9) Impact of Jet
10) Pipe Friction Apparatus
11) V-Notch Apparatus
12) Reynold's Apparatus

1) Sigle cylinder fuel injection system

2) Model of water cooling system
3) Four cylinder fuel injection system in diesel
engine
4) Solex carburetor
5) Mouling sand testing apparatus
PRODUCTION AND 6) Microscope
15 Mechanical Engg. IC ENGINE 7) Lathe tool dynamometer
Laboratory 8) Drilling tool Dynamometer
9) Sine Bar
10) Cut model of single cylinder 4-S petrol engine
11) 4-S C.I engine test rig
12) 4-S S.I engine test rig
13) 4-Cylinder 4-S S.I. Engine test rig
14) VCR Engine works with alternate fuels

1) Universal governor appt

2) Gyroscopic test rig
3) Static Dynamic Balancing appt.
4) Epicyclic gear train
5) Determination of critical speed of Rotating shaft
6) CAM Analysis
7) Helical Spring
Machine Dynamic 8) Screw Jack
16 Mechanical Engg.
Laboratory 9) Journal Bearing
10) Simple / compound /Reverted Gear
11) Rope belt dynamometer
12) Drum Brake
13) Bifilar Suspension Apparatus
14) Trifilar Suspension Apparatus
15) Coriollis component of acceleration apparatus
16) Radius of gyration of connecting rod

16
 1) Vapour Compression test rig
2) Vapour Absorption Test Rig
3) Cooling Tower
Refrigeration and Air 4) Calibration of thermocouples
Conditioning and 5) Vibration measuring equipment
17 Mechanical Engg.
Measurement 6) Window Air conditioning apparatus
Laboratory 7) Air Conditioning apparatus
8) Rotameter apparatus
9) Pneumatic trainer kit
10) Strain gauge apparatus
1) Torsion Testing Machine
2) Universal Testing Machine (UTM)
Material Testing 3) Fatigue Testing Machine
18 Mechanical Engg.
Laboratory 4) Impact Testing Machine
5) Compression Testing Machine
6) Hardness Testing Machine
1) Unconfined compression testing machine
2) Laboratray Vane Shear
3) California Bearing Ratio Apparatus
4) High speed stirrer with dispersion cup & baffle.
5) Shrinkage Limit Set
6) Hand Operated Extractor
7) Direct shear apparatus
8) Load Frame Appratus
9) Triaxial cell
10) Pore pressure apparatus
11) Consolidation Appratus
12) Pycnometer-14nos
13) ISSeive
(2.36mm,4.75mm,1.18mm,600µ,425µ,300µ,
150µ,75µ)-30nos.)
Geo Technical 14) Thermostatically Controlled Oven
19 Civil Engg.
Laboratory 15) Sieve Shaker
16) Hydrometer-2 nos
17) Measuring Cylinder-2nos
18) Liquid Limit Set(Casagrande Apparatus)
19) Liquid Limit Set(Penetration Method)
20) Relative density apparatus
21) Laboratory permeability apparatus
22) Plastic Limit Set
23) Core Cutter
24) Sand pouring cylinder
25) Compaction Test Appratus(light)
26) Compation Test Appratus(heavy)
27) Lateral Pressure Assembly
28) Sampling tube
29) Rapid moisture meter
30) Split Sampling Tube

17
 31) Drilling Rod for penetration test

1) Los Angeles Abrasion testing Machine

2) Los Angeles Abrasion testing Machine Ball- 12
nos
3) Aggregate Impact Value testing apparatus with
container
4) Aggregate crushing value Apparatus
5) Universal Penetrometer
6) Ring and Ball apparatus
7) Ductility testing apparatus
8) Flash and fire point apparatus
9) Marshall Apparatus
10) Specific gravity bottle
Transportation 11) Thermometer
20 Civil Engg. 12) Digital Thermometer- 3 nos.
Laboratory
13) Viscosity Apparatus
14) Weighing Machine
15) Film stripping device
16) Thickness gauge
17) Length Gauge
18) Vernier Caliper
19) Buoyancy Balance
20) Bitumen Extractor
21) GI sieves -3 nos.
22) GI sieves 12" dia- 5 nos.
23) Glass beakers
24) Glass beakers-2 nos.

1) Land Measuring Metric chain.- 3 nos

2) Land Measuring Metric chain.
3) Wooden Peg- 10 nos
4) Ranging Rod -15 nos
5) Prismatic Compass - 4 nos
6) Plane table with stand & accessories - 2 nos.
7) Dumpy Level - 5 nos
8) Aluminum Leveling Staff - 5 nos
9) Cross Staff
Survey Field
21 Civil Engg. 10) Precision Direct Reading Vernier Transit
Laboratory
Theodolite - 3 nos
11) Stop Watch
12) Hammer
13) Fibre Glass Tape - 3 nos
14) Fibre Glass Tape
15) Arrow - 10 nos
16) Total Station
17) Steel Tape - 2 nos
18) Dust Mask

18
 1) Vicat Apparatus - 3 nos
2) Compression Testing Machine - 3 nos
3) Vibrating Machine
4) Tensile Testing Machine
5) Specific Gravity Bottle - 3 nos
6) Le-Chatelier Mould
7) Le-Chatelier Water bath
8) IS Sieve - 15 nos
9) Pan and Cover for 20cm Diameter Sieve
10) Mortar Cube Mould - 13 nos
11) Permeability Test Apparatus - 3 nos
12) Slump Cone - 2 nos
13) Compaction Factor Test
14) Cube Concrete Mould - 20 nos
Material Testing 15) Cylinder Concrete Mould - 8 nos
22 Civil Engg.
Laboratory 16) Beam Concrete Mould - 8 nos
17) Briquette Mould
18) Flow Table
19) Weighing Machine
20) Flexural Testing Machine
21) Slump Cone
22) GI Tray - 2 nos
23) Enamel Tray - 4 nos
24) Gi Sieve - 22 nos.
25) Gauging Trowel - 8 nos
26) Normal Trowel - 9 nos
27) Measuring Cylinder - 2 nos
28) Belcha
29) Baby Concrete Mixture
30) Concrete test Hammer

19
(iii) COMPUTING FACILITIES:-
a) Number of configuration of system:-
1. Desktop- 430 nos
2. Printer- 30 nos
3. Scanner - 14 nos
4. Data Switch- 110 nos
5. Router & WI-Fi - 40 nos
6. UPS - 14 no
7. Motherboard- 200 nos
8. CPU Fan- 60 nos
9. Hard Disk- 150 nos
10. RAM- 221 nos
11. SPMS- 123 nos
12. Laptop-15 nos
13. Keyboard & Mouse-242 nos
14. Monitor-124 nos
15. Lancard-08 nos
16. Pen Drive- 48 nos

17. External DVD Writer- 04 nos

18. Web Camera- 11 nos
19. Projector- 67 nos
20. CCTv Camera- 317 nos
21. Video Still Camera- 5 nos
22. Biometric Machine-35 nos
23. Sound System-115 nos
24. Software Application- 31 nos
25. Tool-387
b) Total number of systems connected by LAN: - 530
c) Total number of systems connected to WAN: - -
d) Internet bandwidth:-300+10 Mbps: Line form Jio & Vodafone
e) Major software packages available: - Windows 98, Windows 2003 server, Linux 9.0,
Microsoft window-10

20
 MSDN Academic Alliance Ver-7 Full Pack, Borland C++, MS Office 2007, Oracle-10,
Oracle-8, Adobe Photoshop-7, Matlab-7, Java-3.0, Tally-9.0, Autocard-2007, 2010
f) Special Purpose facilities available: - Yes
(iv) WORKSHOP:-
a) List of facilities available:-
Games and Sports facilities : Yes
Gymnasium : Yes
Extra Curriculum Activities : Yes
Soft Skill Development Facilities : Yes
Number of Classrooms and size of each : 59 (66.33 sq.m)
Number of Tutorial rooms and size of each : 20 (36 sq.m)
Number of Laboratories and size of each : 76 (180sq.m appx.)
Number of drawing halls and size of each : 03 (183.00 sq.m)
Number of Computer Center with capacity : 02 (500 sq.m. in approx.)
Central Examination Facility Number of Rooms : Yes
(59 classrooms and capacity of each of 66.33sq.m and 16 tutorials (36 sq.m.)
(Located in 4 floors are converted into examination halls during examination time based on availability)

(iv) Teaching Learning Process:-

a) Curriculum and syllabus for each of the programme as approved by the
University:-
Yes Available on www.bput.ac.in
b) Academic Calendar of the University:- Yes Available on www.bput.ac.in
c) Academic Time Table:- Yes
d) Teaching Load of each Faculty:-
e) Asso. Professor : 12 hours per week
Asst. Professor : 16 hours per week
Professor : 08 hours per week
f) Internal Continuous Evaluation System in Place :- Yes
g) assessment of Faculty, System in place :- Yes

NOTE: - Suppression and/or misrepresentation of information would attract appropriate penal

action.
Prof (Dr) P. K. SUBUDHI
PRINCIPAL
21
Annexure-I

22