Datasheet -- SS441A
SS441A
SS400 Series Unipolar Hall-Effect Digital Position Sensor;
radial lead IC package
Features
● Digital current sinking output
● Quad-Hall design virtually eliminates mechanical stress
Representative
effects
photograph, actual
● Temperature compensated magnetics
product appearance
● Operate/release points can be customized
may vary. ● High output current capability
● Operate/release points symmetrical around zero gauss
Due to regional (bipolar/latch)
agency approval ● Package material: Plaskon 3300H
requirements, some ● Surface mount version available: SS400-S (with cut and
products may not be formed leads)
available in your area.
Please contact your
regional Honeywell
office regarding your Description
product of choice. SS400 Series position sensors have a thermally balanced integrated
circuit over full temperature range. The negative compensation
slope is optimized to match the negative temperature coefficient of
lower cost magnets. Bipolar,latching and unipolar magnetics are
available.
Band gap regulation provides extremely stable operation over 3.8
Vdc to 30 Vdc supply voltage range.
NOTE: Interruption of power to a latching device may cause the
output to change state when power is restored. If a magnetic field
of sufficient strength is present, the sensor output will be in the
condition dictated by the magnetic field.
SS441A
SS400 Series Unipolar Hall-Effect Digital Position Sensor; radial lead IC package
file:///Y|/Names/Tarankov/pdf/357/SS441A.htm (1 of 6)16.05.2006 13:45:40
Datasheet -- SS441A
Product Specifications
Product Type Hall-Effect Digital Position Sensor
Package Quantity/Type Available in 1,000/Bag
Package Style Radial Lead IC
Supply Voltage 3.8 Vdc to 30.0 Vdc
Output Type Sink
Magnetic Actuation Type Unipolar
Operating Temperature Range -40 °C to 150 °C [-40 °F to 302 °F]
Output Voltage 0.4 Vdc max.
Switching Time Rise (10 % to 90 %) 0.05 µs typ., 1.5 µs max.
Switching Time Fall (90 % to 10 %) 0.15 µs typ., 1.5 µs max.
Availability Global
Supply Current (max. @ 25 °C) 7.5 mA typ.
Output Current (max.) 20 mA
Operate Point @ 25 °C 8.5 mT [85 G] typ.
Release Point @ 25 °C 5.5 mT [55 G] typ.
Leakage Current max. 10 µA
Differential 3.0 mT [30 G] typ.
Series Name SS400 Series
SS441A
SS400 Series Unipolar Hall-Effect Digital Position Sensor; radial lead IC package
file:///Y|/Names/Tarankov/pdf/357/SS441A.htm (2 of 6)16.05.2006 13:45:40
Datasheet -- SS441A
SS441A
SS400 Series Unipolar Hall-Effect Digital Position Sensor; radial lead IC package
file:///Y|/Names/Tarankov/pdf/357/SS441A.htm (3 of 6)16.05.2006 13:45:40
Datasheet -- SS441A
SS441A
SS400 Series Unipolar Hall-Effect Digital Position Sensor; radial lead IC package
file:///Y|/Names/Tarankov/pdf/357/SS441A.htm (4 of 6)16.05.2006 13:45:40
Datasheet -- SS441A
file:///Y|/Names/Tarankov/pdf/357/SS441A.htm (5 of 6)16.05.2006 13:45:40
Datasheet -- SS441A
SS441A
SS400 Series Unipolar Hall-Effect Digital Position Sensor; radial lead IC package
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop devices, or in any other
application where failure of the product could result in personal injury.
Failure to comply with these instructions could result in death or serious injury.
MISUSE OF DOCUMENTATION
● The information presented in this product sheet (or catalog) is for reference only.
DO NOT USE this document as product installation information.
● Complete installation, operation and maintenance information is provided in the
instructions supplied with each product.
Failure to comply with these instructions could result in death or serious injury.
© Copyright Honeywell Inc.1998-2004 All rights reserved.
file:///Y|/Names/Tarankov/pdf/357/SS441A.htm (6 of 6)16.05.2006 13:45:40
