MACHINE SPECIFICATIONS

(SELECTION SHEET)

DNM 5700 4th Generation

VERTICAL MACHINING CENTER

Draft Correction Approval

/ / /

Confirmed by Control Technology Team 2

Issued by MC Development Team 1

Date : July. 2023

DN SOLUTIONS CO., LTD.

MC제품개발 MC개발1팀 총11매중1매

 VERTICAL MACHINING CENTER

DNM 5700 4th GENERATION

MACHINE SPEC. SELECTION SHEET

1. GENERAL SPECIFICATION
ITEM UNIT SPECIFICATION SELECTION

TABLE SURFACE mm T-SLOT (4-125 x 18H8)

TABLE SIZE mm 1300 x 570

CAPACITY MAX. WORKPIECE HEIGHT(1) mm 590 DEFAULT

MAX. WORKPIECE WEIGHT kg 1000

SPINDLE TO TABLE SURFACE mm 150 ~ 660

LENGTH mm 2470

MAIN DIMENSION WIDTH mm 3320 DEFAULT

HEIGHT mm 2980

MACHINE WEIGHT(NET)(2) kg 6500 DEFAULT

3Ph-AC200~480V
POWER SOURCE(3) - DEFAULT
50/60Hz

PRESSURE MPa 0.54

COMPRESSED AIR DEFAULT
UTILITY CONSUMPTION NL/min 250

REQUIRED POWER CAPACITY_FANUC

(4)
kVA 34.31 STD.

REQUIRED POWER CAPACITY_HEIDENHAIN (4) kVA 32.00 OPT. SELECTIVE

REQUIRED POWER CAPACITY_SIEMENS (4) kVA 41.40 OPT.

DN SOLUTIONS 4 TONE COLOR

MT DARK GRAY(5.3PB 3.0 / 0.4)
MT MIDDLE GRAY(1.4RP 4.8 / 0.1) STD.
MACHINE COLOR MT LIGHT GRAY(7.3B 7.8 / 0.4) SELECTIVE
MT BLUE(6.1PB 5.9 / 7.6)

USER DEFINED OPT.

FANUC I-SERIES STD.

CNC SYSTEM MODEL HEIDENHAIN OPT. SELECTIVE

SIEMENS S828D OPT.

(1) This value is the maximum for the height of rectangular without interference of ATC operating.
(2) Specified weight is based on the machine with standard specification and including standard accessories and equipment
(3) Transformer is required according to supplied power specification
(4) This value is depend on spindle motor power.

Specifications are subject to change without prior notice. - 2 / 11 -

2. SPINDLE HEAD
ITEM UNIT SPECIFICATION SELECTION

POWER(CONT./SHORT) kW 11/18.5(S3 15%)

MAX. SPINDLE SPEED r/min 8000

BASE SPEED r/min 1500

TYPE 1 STD.
MAX. TORQUE(SHORT
N·m 117.8(S3 15%)
TERM)
ORIENTATION BUILT-IN SENSOR

POWER TRANSMISSION DIRECT CONNECTON

POWER(CONT./SHORT) kW 11/18.5(S3 15%)

MAX. SPINDLE SPEED r/min 12000

BASE SPEED r/min 1500

TYPE 2 OPT.
MAX. TORQUE(SHORT
N·m 117.8(S3 15%)
TERM)
ORIENTATION BUILT-IN SENSOR

POWER TRANSMISSION DIRECT CONNECTON

SPINDLE
SELECTIVE
(FANUC)
POWER(CONT./SHORT) kW 11/15(S3 25%)
MAX. SPINDLE SPEED r/min 8000

BASE SPEED r/min 500

TYPE 3 OPT.
MAX. TORQUE(SHORT
N·m 286(S3 15%)
TERM)
ORIENTATION BUILT-IN SENSOR

POWER TRANSMISSION DIRECT CONNECTON

POWER(CONT./SHORT) kW 11/18.5(S3 15%)

MAX. SPINDLE SPEED r/min 15000

BASE SPEED r/min 1500

TYPE 4 OPT.
MAX. TORQUE(SHORT
N·m 117.8(S3 15%)
TERM)
ORIENTATION BUILT-IN SENSOR

POWER TRANSMISSION DIRECT CONNECTON

Specifications are subject to change without prior notice. - 3 / 11 -

 POWER(CONT./SHORT) kW 10/17(S6 25%)

MAX. SPINDLE SPEED r/min 12000

BASE SPEED r/min 1500

TYPE 5 STD.
MAX. TORQUE(SHORT
N·m 108.6(S6 25%)
TERM)
ORIENTATION BUILT-IN SENSOR

POWER TRANSMISSION DIRECT CONNECTON

SPINDLE
SELECTIVE
(HEIDENHAIN)
POWER(CONT./SHORT) kW 10/17(S6 25%)

MAX. SPINDLE SPEED r/min 15000

BASE SPEED r/min 1500

TYPE 6 OPT.
MAX. TORQUE(SHORT
N·m 108.6(S6 25%)
TERM)
ORIENTATION BUILT-IN SENSOR

POWER TRANSMISSION DIRECT CONNECTON

POWER(CONT./SHORT) kW 11/16.5(S6 40%)

MAX. SPINDLE SPEED r/min 12000

BASE SPEED r/min 1500

TYPE 7 STD.
MAX. TORQUE(SHORT
N·m 141(S6 40%)
TERM)
ORIENTATION BUILT-IN SENSOR

POWER TRANSMISSION DIRECT CONNECTON

SPINDLE
SELECTIVE
(SIEMENS)
POWER(CONT./SHORT) kW 11/16.5(S6 40%)

MAX. SPINDLE SPEED r/min 15000

BASE SPEED r/min 1500

TYPE 8 OPT.
MAX. TORQUE(SHORT
N·m 141(S6 40%)
TERM)
ORIENTATION BUILT-IN SENSOR

POWER TRANSMISSION DIRECT CONNECTON

2. SPINDLE HEAD
ITEM UNIT SPECIFICATION SELECTION

SPINDLE TOOL CLAMPING FORCE kN 7.35

DEFAULT
TAPER TYPE ISO #40, 7/24 TAPER

SPINDLE COOLING
(1)
TANK CAPACITY L 15
OPT.
CAPACITY 60Hz(50Hz) kW 1.2 / 1.0
(1) Spindle cooling is standard for over 12000 r/min spindle

Specifications are subject to change without prior notice. - 4 / 11 -

3. AXES SYSTEM
ITEM UNIT SPECIFICATION SELECTION

X AXIS mm 1050

STROKE Y AXIS mm 570

Z AXIS mm 510

X AXIS m/min 42

RAPID TRAVERSE Y AXIS m/min 42

Z AXIS m/min 36

X AXIS ms 120
(1)
ACCELERATION / DECELERATION TIME Y AXIS ms 110

Z AXIS ms 100 DEFAULT

MAX. CUTTING FEEDRATE mm/min 36,000

(1)
RATED THRUST FORCE AT STALL Z AXIS kN 10.5

X AXIS mm 40 x 16

BALL SCREW(DIAMETER x LEAD) Y AXIS mm 40 x 16

Z AXIS mm 40 x 12

X AXIS mm 0.011 / 0.006

POSITIONING /
ACCURACY(2) Y AXIS mm 0.008 / 0.005
REPEATABILITY
Z AXIS mm 0.008 / 0.005

X AXIS kW 3.0
DRIVE MOTOR
POWER Y AXIS kW 3.0 STD.
(FANUC)
Z AXIS kW 3.0

X AXIS kW 5.1
DRIVE MOTOR
POWER Y AXIS kW 5.1 OPT. SELECTIVE
(HEIDENHAIN)
Z AXIS kW 5.1

X AXIS kW 4.0
DRIVE MOTOR
POWER Y AXIS kW 5.5 OPT.
(SIEMENS)
Z AXIS kW 3.6
ABSOLUTE PULSE
- STD.
X AXIS CODER SELECTIVE
LINEAR SCALE - OPT.
ABSOLUTE PULSE
- STD.
FEEDBACK SYSTEM Y AXIS CODER SELECTIVE
LINEAR SCALE - OPT.
ABSOLUTE PULSE
- STD.
Z AXIS CODER SELECTIVE
LINEAR SCALE - OPT.
(1) This value is based on the machine with standard specification
(2) Accuracy measuring is based on ISO230-2.

Specifications are subject to change without prior notice. - 5 / 11 -

4. ATC
ITEM UNIT SPECIFICATION SELECTION

MAS403 BT 40 PS806(NIKKEN) STD.

TOOL SHANK PULL STUD CAT 40 MODIFIED DIN OPT. SELECTIVE

DIN 69871-A40 DIN 69872 #40 OPT.

30 STD.
TOOL STORAGE CAPACITY ea. SELECTIVE
40 OPT.

TOOL SELECT TYPE MEMORY RANDOM

CAM TYPE 30TOOL mm 80(CONT.), 125(ADJACENT POTS EMPTY)
MAX. TOOL DIAMETER
40TOOL mm 76(CONT.), 125(ADJACENT POTS EMPTY)
MAX. TOOL LENGTH mm 300
DEFAULT
MAX. TOOL WEIGHT kg 8

MAX. TOOL MOMENT N·m 5.88

TOOL-TO-TOOL TIME s 1.2

CHIP-TO-CHIP TIME(with ATC SHUTTER) s 3.2(4.1)

5. LUBRICATION SYSTEM
ITEM UNIT SPECIFICATION SELECTION

CARTIRIDGE CAPACITY L 0.7

PUMP MOTOR POWER kW 0.012

LUBRICATION DISCHARGE PRESSURE MPa 5 DEFAULT

DISCHARGE VOLUME mL/min 7

DISTRIBUTOR TYPE METERING

Specifications are subject to change without prior notice. - 6 / 11 -

6. COOLANT SYSTEM
ITEM UNIT SPECIFICATION SELECTION

TANK CAPACITY L 430

PUMP MOTOR POWER kW 0.4

FLOOD COOLANT Ⅰ FILTERATION mesh 20 (TANK SCREEN FILTER) STD.

MAX. PRESSURE 60Hz(50Hz) MPa 0.16 (0.12)

MAX. FLOWRATE 60Hz(50Hz) L/min 40 (40)

TANK CAPACITY L STD. TANK COMMON

PUMP MOTOR POWER kW 0.75

FLOOD COOLANT Ⅱ FILTERATION mesh 20 (TANK SCREEN FILTER) OPT. SELECTIVE

MAX. PRESSURE 60Hz(50Hz) MPa 0.45(0.3)

MAX. FLOWRATE 60Hz(50Hz) L/min 30 (30)

TANK CAPACITY L STD. TANK COMMON

PUMP MOTOR POWER kW 1.1

FLOOD COOLANT Ⅲ FILTERATION mesh 20 (TANK SCREEN FILTER) OPT.

MAX. PRESSURE 60Hz(50Hz) MPa 1.0 (0.75)

MAX. FLOWRATE 60Hz(50Hz) L/min 20 (20)

TANK CAPACITY L STD. TANK COMMON

PUMP MOTOR POWER kW 1.5

COOLANT SYSTEM
-MIDDLE FILTERATION ㎛ 25 (CYCLONE FILTER)(7) OPT.
(11)
PRESSURE TSC Ⅰ
MAX. PRESSURE 60Hz(50Hz) MPa 2.0(1.9)(1)

MAX. FLOWRATE 60Hz(50Hz) L/min 23(2)(18)(3)

TANK CAPACITY L STD. TANK COMMON

PUMP MOTOR POWER kW 4.0

COOLANT SYSTEM
-MIDDLE FILTERATION ㎛ 25 (CYCLONE FILTER)(7) OPT.
PRESSURE TSC Ⅱ(11)
(1)
MAX. PRESSURE 60Hz(50Hz) MPa 2.0(1.3)

MAX. FLOWRATE 60Hz(50Hz) L/min 50(4)(35)(5)

SELECTIVE

Specifications are subject to change without prior notice. - 7 / 11 -

 SELECTIVE
TANK CAPACITY L 140

PUMP MOTOR POWER kW 2.9

COOLANT SYSTEM
-MIDDLE FILTERATION ㎛ 25 (CYCLONE FILTER)(10) OPT.
PRESSURE TSC Ⅲ(11)
MAX. PRESSURE 60Hz(50Hz) MPa 3.0(3.0)(1)
(6) (7)
MAX. FLOWRATE 60Hz(50Hz) L/min 36 (31)

TANK CAPACITY L 140

PUMP MOTOR POWER kW 7.5

COOLANT SYSTEM
-HIGH FILTERATION ㎛ 25 (CYCLONE FILTER)
(10)
OPT.
PRESSURE TSC(11)
MAX. PRESSURE 60Hz(50Hz) MPa 7.0(1)
(8) (9)
MAX. FLOWRATE 60Hz(50Hz) L/min 39 (32)

TANK CAPACITY L STD. TANK COMMON

PUMP MOTOR POWER kW 1.1

SHOWER COOLANT FILTERATION mesh 20 (TANK SCREEN FILTER) OPT. SELECTIVE

MAX. PRESSURE 60Hz(50Hz) MPa 0.1 (0.065)

MAX. FLOWRATE 60Hz(50Hz) L/min 200 (200)

TANK CAPACITY L STD. TANK COMMON

PUMP MOTOR POWER kW 1.8

FLUSHING COOLANT FILTERATION mesh 20 (TANK SCREEN FILTER) OPT. SELECTIVE

MAX. PRESSURE 60Hz(50Hz) MPa 0.3 (0.2)

MAX. FLOWRATE 60Hz(50Hz) L/min 100 (100)

Specifications are subject to change without prior notice. - 8 / 11 -

 TANK CAPACITY L STD. TANK COMMON

PUMP MOTOR POWER kW 0.6

COOLANT GUN FILTERATION mesh 20 (TANK SCREEN FILTER) OPT. SELECTIVE

MAX. PRESSURE 60Hz(50Hz) MPa 0.2 (0.15)

MAX. FLOWRATE 60Hz(50Hz) L/min 70 (55)

OIL SKIMMER TYPE BELT OPT. SELECTIVE

(1) This value is the max.pressure when blocking.
(2) This value is the coolant flow rate when tool hole dia. is 6 mm and pump outlet pressure is 0.8 MPa.
(3) This value is the coolant flow rate when tool hole dia. is 6 mm and pump outlet pressure is 0.6 MPa.
(4) This value is the coolant flow rate when tool hole dia. is 6 mm and pump outlet pressure is 1.7 MPa.
(5) This value is the coolant flow rate when tool hole dia. is 6 mm and pump outlet pressure is 1.2 MPa.
(6) This value is the coolant flow rate when tool hole dia. is 6 mm and pump outlet pressure is 1.4 MPa.
(7) This value is the coolant flow rate when tool hole dia. is 6 mm and pump outlet pressure is 1.0 MPa.
(8) This value is the coolant flow rate when tool hole dia. is 5 mm and pump outlet pressure is 1.8 MPa.
(9) This value is the coolant flow rate when tool hole dia. is 5 mm and pump outlet pressure is 1.1 MPa.
(10) If high viscosity neat oil is using for coolant, spindle can be damaged by contamination due to decrease
of filtering efficiency. (For more information, consult with DN Solutions R&D)
(11) If this option is selected, the TSA(through spindle air) function is available. TSA max.pressure is 0.54 MPa.
<NOTE>
1. TSC preparation without pump & filter. (TSC ready)
2. At (2)~(5), real pressure and flow rate can be changed by machine & tool condition.
For more information, consult with DN Solutions R&D.

7. CHIP PAN, CHIP CONVEYOR & BUCKET

ITEM UNIT SPECIFICATION SELECTION

CHIP PAN SET - STD.

SCREW(AUGER) TYPE CONVEYOR SET LEFT / RIGHT OPT.

SELECTIVE
CONVEYOR HINGED PLATE TYPE CONVEYOR SET LEFT / RIGHT / REAR OPT.

SCRAPER TYPE CONVEYOR SET LEFT / RIGHT / REAR OPT.

(1)
140

220
CAPACITY L
300
BUCKET OPT. SELECTIVE
380

ROTATION
TYPE -
FORKLIFT
(1) This is a standard option when selecting the auger type chip conveyor option.

8. COOLING FOR ELECTRIC CABINET

ITEM UNIT SPECIFICATION SELECTION

FAN COOLER SET - STD.

SELECTIVE
AIR CONDITIONER SET - OPT.

Specifications are subject to change without prior notice. - 9 / 11 -

9. ACCESSORIES
ITEM UNIT SPECIFICATION SELECTION

WORK LIGHT SET LED LAMP

OPERATOR CALL LAMP SET 3-COLOR SIGNAL TOWER(LED)

STANDARD LEVELING BLOCK & BOLT SET - DEFAULT

SMART THERMAL CONTROL - SENSORLESS TYPE(ONLY SPINDLE)

INSTALLATION TOOL KIT SET -

MAINTENANCE TOOL KIT SET L-WRENCH AND SPANNER SET SELECTIVE

MAKER/SPEC. SET RENISHAW / TS27R

AUTO TOOL LENGTH
SELECTIVE
MEASUREMEMT
MAKER/SPEC. SET RENISHAW / OTS
AUTO TOOL BREAKAGE FAR-EAST MACHINE TOOL /
MAKER/SPEC. SET SELECTIVE
DETECTION FEM-1CP (NEEDLE TYPE IN CUTTING AREA)
AUTO WORKPIECE
MAKER/SPEC. SET RENISHAW / OMP60 SELECTIVE
MEASUREMENT
CALIBRATION BLOCK MAKER SET BLUM SELECTIVE
4TH AXIS PREPARATION CABLING FOR SERVO/1-
SET FACTORY READY MADE SELECTIVE
PNEUMATIC PIPING
MAKER/SPEC. SET SAMCHULLY / S-250F8-DS

4TH A-AXIS TABLE DIAMETER mm 240

WITH CNCR.TABLE SELECTIVE
TYPE 2 ACCURACY arcsecs 20 (POSITIONING) / 4 (REPEATABILITY)

MAX.ROTATING SPEED r/min 33.3

MAKER/SPEC. SET SAMCHULLY / S-320F8-DS

4TH A-AXIS TABLE DIAMETER mm 310

WITH CNCR.TABLE SELECTIVE
TYPE 3 ACCURACY arcsecs 20 (POSITIONING) / 4 (REPEATABILITY)

OPTIONAL MAX.ROTATING SPEED r/min 25

AIR GUN SET - SELECTIVE

150

RAISING BLOCK mm 200 SELECTIVE

300

1.5
POWER kW
2.2
MIST COLLECTOR SELECTIVE
WATER SOLUBLE
TYPE -
NON WATER SOLUBLE

AUTO DOOR WITH SAFETY EDGE - SELECTIVE

TEST BAR SET SELECTIVE

1 PORT
WORK LOCATING CONFIRMATION SET SELECTIVE
2 PORT

L 185
(1)
COOLANT CHILLER 60Hz(50Hz) SELECTIVE
kcal/h 5000 (4150)
(1) In case of using neat cutting oil, this device is highly recommended in order to reduce the change of accuracy by rising the coolant temperatures.

Specifications are subject to change without prior notice. - 10 / 11 -

10. SPECIAL QUOTATION OPTIONS
ITEM UNIT SPECIFICATION SELECTION
(1)
ANCHORING SET SLIDE CLAMP & CHEMINCAL ANCHOR BOLT OPT.
(2)
TSA MAX. PRESSURE MPa 0.54 OPT.

ATC CHAIN TYPE SET 60T OPT.

TOOL TYPE - HSK63A OPT.

ATC FULL COVER SET 30TOOL / 40TOOL OPT.

HINGE TYPE OPT.

DRUM CHIPCONVEYOR SET
SCRAPER TYPE OPT.

OIL LUBRICATION SET X, Y, Z AXIS OPT.

20 BAR TSC with INVERTER SET 50Hz → 60Hz OPT.

BELLOWS COVER(X/Y/Z)

PROTECT COVER(X-AXIS)
WET MACHINING SET
BALL SCREW BELLOWS COVER(X/Y)

GUIDE WAY DOUBLE WIPER

FINE DUST PROTECTING PACKAGE PROTECT COVER(X-AXIS) OPT.

BALL SCREW BELLOWS COVER(X/Y)

DRY MACHINING SET GUIDE WAY DOUBLE WIPER

AIR OIL SUCTION(ONLY 15k SPINDLE)

ATC FULL CLOSED COVER

AUTO TOOL LENGTH MEASUREMEMT SET RENISHAW / LTS OPT.

AUTO TOOL BREAKAGE DETECTION SET MSC/BK9(NEEDLE TYPE ON MAGAZINE) OPT.

(1) Please refer to foundation drawing in relation to anchoring. if more detailed information want,
consult with DN Solutions service.
(2) In case of TSC is not required and only TSA is needed, this option can be selected.
1. Please inquire DN Solutions R&D department about special quotation options

< NOTE >

1. Specifications are subject to change without prior notice.
2. All specified values are given at standard electric power conditions.(60Hz, 220V)
3. Machine demension and weight are changed according to optional specification.
4. Please refer to lay-out and foundation drawing in relation to installation/electric device.
5. All specified values of pressure, flowrate of coolant, lubrication and hydraulic pump are given at pump outlet.
6. The flowrate and pressure of the coolant are given at the condition of using water soluble coolant.
7. Since pressure and flowrate of T-S-C has influence on tool life and cutting capability,
type of T-S-C should be selected with prudence.
For detail specification about T-S-C , refer to chapter Ⅱ-12-B of machining center sales guides.
8. Refer to the separated spec. sheets in relation to specification, function and option of CNC controller.

Specifications are subject to change without prior notice. - 11 / 11 -