Line Item Summary MSIL Phase-1

PACKAGE -1
Level MSIL Number Description/Part Number
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (excee
1 A.1.1
:- All kinds of soil
1 A.10 Carriage of excavated earth (The rates will be applicable to the net quantities
1 A.3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
1 A.5 Supplying and filling in plinth with sand under floors, including watering, ramm
1 A.N.113 Clearing jungle including uprooting of rank vegetation, grass, brush wood, tree
Extra for every additional lift of 1.5 m or part thereof for excavation / banking excavated or stacked ma
1 A.N.114
:- All kinds150
Providing of soil
mm thick stone pitching in cement mortar 1:3 (1 Cement : 3 Sand) as per drawing and Te
1 A.N.115
profiles put up by means of line and pegs at intervals of 3 meters to ensure regular straight work and a
1 A.N.16 Providing, spraying and Injecting Chlorophysyphos / Lindane EC 20% with 1% conc
1 A.N.20 Filling the designated areas with approved imported good soil including loadi
"Providing and laying in position ready mixed plain cement concrete as per approved design mix and m
1 B.N.15.1
:- M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)"
1 B.N.25 Providing and fixing 25mm thk. Acid and / or alkali resistant tiles for Flooring
Centering and shuttering including strutting, propping etc. and removal of form for:
1 C.1.1
:- Foundations,
Centering footings, bases
and shuttering of columns,
including strutting,etc. for mass
propping etc.concrete
and removal of form for:
1 C.1.2
:- Walls (any thickness) including attached pilasters, butteresses,
Centering and shuttering including strutting, propping etc. and removal plinth of
andform
string
for:courses etc.
1 C.1.3
:- Suspended
Centering andfloors, roofs,
shuttering landings,strutting,
including balconies and access
propping etc.platform
and removal of form for:
1 C.1.5
:- Lintels, beams, plinth beams, girders, bressumers and cantilevers
Centering and shuttering including strutting, propping etc. and removal of form for:
1 C.1.6
:- Columns,
Centering Pillars,
and Piers, including
shuttering Abutments, Posts and
strutting, Struts etc. and removal of form for:
propping
1 C.1.7 Providing and layinglandings)
in position readyspiral-staircases
mixed M-25 grade concrete for reinforced cement concrete wor
:- Stairs, (excluding except
1 C.10.1 Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete wor
1 C.10.2 :- All works upto plinth level
1 C.111.1 :- All works
Providing above
and fixingplinth
at sitelevel upto floorU-
of precasted V shaped
level drain with solid lid/cover
1 C.111.2 Providing and fixing at site of precasted U- shaped drain with solid lid/cover
1 C.111.3 Providing and fixing at site of precasted U- shaped drain with solid lid/cover
1 C.111.5 Providing and fixing at site of precasted U- shaped drain with solid lid/cover
1 C.114 Providing and laying screed concrete 1:2:4( 1 cement : 2 coarse sand : 4 stone
1 C.115 Providing, mixing and laying Plum cement concrete 1:4:8 with 40% boulder having
1 C.12.1 Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansio
:- 200 mm
Groove wide.
cutting of floor by Diamand Cutter
1 C.16.2
1 C.16.3 Groove cutting ofdepth
:- Upto 150mm floor by Diamand Cutter
:- Upto cutting
Groove 250mmofdepth
floor by Diamand Cutter
1 C.16.4
:- Upto 300mm depth
1 C.18 Providing and applying bonding agent for joining new to old concrete surfaces
1 C.20 Providing core cut 100 mm dia-230 mm deep in RCC surface inclusive disposal, stag
1 C.21 Providing core cut 150 mm dia-150 mm deep in RCC surface inclusive disposal, stag
1 C.22 Providing core cut 150 mm dia-230 mm deep in RCC surface inclusive disposal, sta
1 C.24 Core cutting in RCC 200mm depth. Including machinery for core cutting and
1 C.25 Making expansion joint groove of size 25 mm wide x 10 mm deep and filling th
1 C.27 Making control groove of size 4 mm wide x 10 mm deep by groove cutting machi
1 C.3.1 Steel reinforcement for R.C.C. work including straightening, cutting, bending,
1 C.4.1 Steel reinforcement for R.C.C. work including straightening, cutting, bending,
1 C.7 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. p
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement c
1 C.8.1
:- All works
Providing upto
and plinth
laying level machine batched and machine mixed design mix M-25 grade cement c
in position
1 C.8.2
:- All works
Extra above plinth
for providing richer level
mixesupto
at allfloor
floorV levels.
level
1 C.9.1
:- Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considere
 Extra for providing richer mixes at all floor levels.
1 C.9.2
:- Providing
Extra M-40 grade
for providing richerconcrete
mixes at instead
all floorof M-25 grade BMC/ RMC.(Note : Cement content considere
levels.
1 C.9.3
:- Providing
Providing andM-35 grade
fixing concrete
at site instead
of precasted U-ofshaped
M-25 grade BMC/RMC.
drain with (Note : Cement
solid lid/cover { Make:-content considere
Fuji Silvertech or
1 C.N.111.6
1200mm X 1200 mm
Designing, Providing and supplying Steel Fibers "Dramix 4D 65/60BG" of Bekaert, to be used in grade s
1 C.N.136
Area of apllication shall be decided in consultation with Engineer-In Charge.
1 C.N.137 Providing and placing steel form work "Armoured Joint" suitable for Depth of
1 C.N.36 Providing and fixing in position 25mm thick SIL FLEX pre molded compressible
Half brick masonry with non modular fly ash bricks of class designation 10,
1 D.37.1
conformingio IS :12894, in super structure above plinth and upto floor V level:Cement mortar 1 : 4 (1 c
1 D.5 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every th
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average comp
1 D.7.1
:- Cement
Brick work mortar
with non 1:6modular
(1 cement : 6 Coarse
fly ash sand)
bricks conforming to IS:12894, class designation 10 average comp
1 D.N.44 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine
:- Cement mortar 1:6 (1 cement : 6 Coarse sand)
1 E.1.1.1 :- Graniteand
Providing of any colour
fixing 18 mmandthick
shade gang saw cut, mirror polished, premoulded and prepolished, machine
1 E.1.1.2 :- Area of slab upto 0.50 sqm
:- Granite of any colour and shade
Providing
:- Area of edge moulding
slab over 0.50 sqmto 18 mm thick marble stone counters, Vanities etc., including machine polish
1 E.2.1
:- Granite work
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep
1 E.4.1
:- Graniteand
Providing Stone of approved
laying shade
flamed finish Granite stone flooring in required design and patterns, in linear as w
1 E.5.1
:- Flamed finish granite stone
Providing and laying Polished Granite slab Jet stone
Black,flooring
Cherry Red, Elite Brown,
in required designCat
and Eye or equivalent.
patterns, in linear as well as
1 E.6.1
:- Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
1 E.7 Supply and installation of 12mm corian acrylic sheet (Make: Du point / LG) for co
Providing and fixing 18mm thick mirror polished, machine cut black granite (galaxy type) door frame of
1 E.8.1
:- Door frame
Providing of 115mm
and fixing 18mm width.
thick mirror polished, machine cut black granite (galaxy type) door frame of
1 E.8.2
:- Door frame of 230mm width.
1 E.N.11 Providing and laying Flooring with machine cut leather finish Granite stone (m
1 E.N.65 Providing and
Providing Precast Concrete
fixing panelling Sillorinpanelling
Cement Concrete
and glazingM25, section as
in panelled orper drawing
panelled anda glazed shutters for d
1 F.1.1.2 :- Ply wood 5 ply, 9 mm thick
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for d
1 F.1.2.1 :-
:- Decorative
Particleand plywood
Board 12 mm both
thickside decorative veneer (Type - I) conforming to IS 1328 BWR type
Providing fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for d
1 F.1.2.2 :-
:- Plain particle
Particle Boardboard
12 mm flatthick
pressed, 3 layer or graded wood particle board medium density Grade I, IS :
1 F.10 :- Pre-laminated
Providing & Fixingparticle
of UPVC board
window withofdecorative lamination
overall thickness on both
of 56mm madesides,
of Grade
hollow,I, Type II, IS:12823 ma
1 F.11 Extra for providing & fixing openable type window with mosquito net frame sp
1 F.12 P/F Partitions with frame work consisits of 50x50mm Ist class hollock wood mem
1 F.12.1 Extra for Partition with Gypsum board with paint
1 F.12.3 Extra for laminated partition
1 F.13.2 P/F Maple wood band with melamine finish
:- 58 mm wide
1 F.14 P/F in position laminated panels consisting of 9 mm commercial ply &1.5mm la
1 F.15 P/F Door frames in first class maple wood of section 100mm x 38mm with rebate
1 F.18 P/F Roller blinds of Mac make or equivalent. It includes all fittings and fixtur
1 F.19 Providing & fixing Wooden glazed panel door as per required design and pattern
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type
1 F.2.1
:- 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
1 F.23 P/f pinup board with 6mm ply at back and teak bidding all over with approved
1 F.235 Providing & fixing 6mm thick clear float glass in full height partition with m
1 F.245 Providing and fixing in position Pantry under counter cabinet of 600mm deep, B
1 F.246 Same as above (item no. F.245), but overhead cabinet of 450mm deep instead
1 F.29 P/F movement board as per standards
1 F.32 P/F green matt (3M or Equivalent)
1 F.34 Providing and fixing in position magnetic white writing board: Meeting room
1 F.35 Providing & fixing frosting film over glass in the pattern as per drawing.
1 F.38 P/F of 6mm thick Margine/Lipping at the edges of doors etc. including necess
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel scr
1 F.4.1
:- 125x64x2.50 mm
 Providing and fixing chromium plated brass handles with necessary screws etc. complete:
1 F.5.1
:- 125 mm& Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ sued
Providing
1 F.6.1
:- 1.5 mm thick
1 F.6.2 Providing & Fixing decorative high pressure laminated sheet of plain / wood grai
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with nece
1 F.8.1
:- 125 mmand fixing bright /matt finished Stainless Steel handles of approved quality & make with nece
Providing
1 F.8.2
:- 100 mmand fixing bright /matt finished Stainless Steel handles of approved quality & make with nece
Providing
1 F.8.3
:- 75 mm
Door: Providing and fixing factory made "Rajshri" or Equivalent as approved by EIC, PVC flush door shu
1 F.N.281
Door Frame: providing and fixing factory made "Rajshri", PVC internal door frame manufactured by M/
1 F.N.282 Providing & Fixing of Three track UPVC Sliding window of overall thickness of 1
1 F.N.283 Providing and fixing pre laminated partitions doors with all accessories, mode
1 F.N.58 Extra for making vision panel of size 300x300mm or different size with 5mm th
1 F.N.84 Extra for providing brass wire mesh of 30 SWG with 12 meshes per linear cm
1 G.10 Extra for filling 1:3:6 ( 1cement:3 coarse sand : 6 graded stone agg. 12.5 mm nom
Providing and fixing of Hollow metal Steel door at all levels from ISO 9001-2000 certified Manufacturer
1 G.11
Door frame
:- Door frameshall bebe
shall single rebate
double profile
rebate of size
profile 100143
of size x 57xmm withmade
57 mm bending
out radius of 1.2(16gauge)
of 1.60mm mm having 1.2
thick
1 G.12
:- DoorEXIT
PANIC leafDEVICES:
shall be 46mm
Supplythick fully flush
of Ingersoll Randdouble
Britonskin door
make CEwith
& ENor1125
without vision2lite.
certified Doorrated
hrs fire leaf 378E
shall
1 G.13.1
:- Single Leaf 378E
PANIC EXIT DEVICES: Supply of Ingersoll Rand Briton make CE & EN 1125 certified 2 hrs fire rated 378E
1 G.13.2
:- Double Leaf 377E
1 G.15 Providing & Fixing of Manual M.S Sliding door comprising of, Top Track : Galv
1 G.17 P/F stainless steel threshold in the bottom of door/ shutter with necessary rei
1 G.19 Supply of MS aldrop 300x10mm including all the fixtures required for fitting of
1 G.20 Fixing MS aldrop 300x10mm including all the fixtures required for fitting of the
P/F Hilti make rebar including drilling necessary hole etc. complete including chemical(Minimum 125 m
1 G.22.1
:- 10mm
P/F Dia. rebar including drilling necessary hole etc. complete including chemical(Minimum 125 m
Hilti make
1 G.22.2
:- 12mm
P/F Dia. rebar including drilling necessary hole etc. complete including chemical(Minimum 125 m
Hilti make
1 G.22.3
:- 16mm
P/F Hilti makedia rebar including drilling necessary hole etc. complete including chemical(Minimum 125 m
1 G.22.4
:- 20mm
P/F dia. rebar including drilling necessary hole etc. complete including chemical(Minimum 125 m
Hilti make
1 G.22.5
:- 25mm
P/F dia. chemical fastener including drilling necessary hole etc. complete in all repect (quoted ra
Hilti make
1 G.23.1
:- 10mm
P/F Dia. chemical fastener including drilling necessary hole etc. complete in all repect (quoted ra
Hilti make
1 G.23.2
:- 12 mm
P/F Hilti makeDia. chemical fastener including drilling necessary hole etc. complete in all repect (quoted ra
1 G.23.3
:- 16Hilti
P/F mmmake Dia chemical fastener including drilling necessary hole etc. complete in all repect (quoted ra
1 G.23.4
:- 20mm
P/F dia. chemical fastener including drilling necessary hole etc. complete in all repect (quoted ra
Hilti make
1 G.23.5
:- 25mm
P/F dia. chemical fastener including drilling necessary hole etc. complete in all repect (quoted ra
Hilti make
1 G.23.6
:- 32mm dia.
1 G.230 Deduct for not applying primer coat on all type of structural steel
1 G.233 P/F studs M19x125mm AW MS with 19WTD Ferrule
1 G.235 Providing & Fixing 3mm Expanded Metal Mesh (25x50)mm work including
1 G.24 Supply and fixing heavy duty Box type Door closer of Dorma make, Model no. -
1 G.26 Providing & fixing G.I. gratings made of MS flat with hot dip galvanised coating
1 G.6 Providing and fixing mild steel round holding down bolts with nuts and washer
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, sta
1 G.7.1
:- M.S. tube
1 G.8.3 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash
1 G.N.168 Providing vision panel of clear fire rated 6mm thick glass including adhesive ta
1 G.N.242 Supply Cost
(Note: of Galvanized (275gsm)
of connection Cold rolled
with welding light gauge
, bolting, steel
riveting structure
is part in rate
of item line and
and lshall not be measured
1 G.N.258 The rate shall be inclusive of all types of consumables such as gas, electrodes,
(Note: Cost of connection with welding , bolting, riveting is part of item rate and bolts,
shallnuts, washers,
not be too
measured
1 G.N.259 The rate shall be inclusive of all types of consumables such as gas, electrodes, bolts, nuts, washers, too
1 G.N.260 ExtraMembers
:- for fabrication of structural
fabricated by coldsteel, including
forming process painting activity to
shall conform (Cost
theof painting
physical paid under seperate
specifications of ASTM
1 G.N.261 :- Members fabricated from hot rolled structural shapes shall conform to the physical spec. of ASTM
:- Rod and angle bracing shall conform to the physical specifications of ASTM A36 (or equivalent) and h
 Extra for Erection of fabricated Structural steel work, including hoisting, alignment, and fixing in positio
1 G.N.262
(Note: Cost of connection with welding , bolting, riveting is part of item rate and shall not be measured
1 G.N.263 Extra for Installation of Cold rolled light guage steel structure
1 G.N.264 P/F studs M16x125mm AW MS with 26WTD Ferrule
1 G.N.265 Providing and fixing of 0.7 mm thick Stainless Steel (Grade 304) mesh of size 25
1 G.N.266 Providing & Fixing of Trolley Guard fabricated in SS pipe of 50 mm dia of 16 sw
1 G.N.267 Providing and Fixing PVC coated 18 swg SS 304 sheet on kitchen walls with cou
1 G.N.268 Providing and erecting GI Crash barrier in true line and level, comprising o
1 G.N.30 Providing & Fixing 40 X 40 mm 2 mm thk SS 304 grade Brushed finish 'L'angle up
1 G.N.50 Extra for carrying out and applying hot deep galvanizing treatment to Hot rolled
1 G.N.66 P/F of angle iron edging in columns and machine foundations edges including ne
1 G.N.82 Grouting/ Backfilling below base plate with non-shrink grout of approved make a
1 G.N.92 Supply andand
Providing installations
fixing 10 mmof Qrailing stain
thick acid finishalkali
and/or stainless steeltiles
resistant AISI of
316SShand
approved make and colour using ac
1 H.1.1.1 :- In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved : 4 coarse
makesand)
and colour using ac
1 H.1.2.1 :-
:- Acid and alkali resistant
In dado/skirting on 12 mm tilethick mortar 1:4 (1 acid proof cement : 4 coarse sand)
1 H.11 :- Acidflooring:
False and alkali
Theresistant tile floor shall be "Hewetson" REG 600 panels manuf
Access raised
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry
1 H.2.1
:- 25 mm thick
1 H.3 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars lai
1 H.4 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with w
1 H.5.1
:- Size of the
Grouting Tile joints
600x600 mm tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of org
of flooring
1 H.6.1
:- Size of Tile 600x600 mm
1 H.8 Extra for using floor hardener nitofloor hardtop as per the specification of t
1 H.9 Providing and fixing Wooden laminated flooring of PERGO or equivalent as per
1 H.98 Providing and laying 75mm thick IPS flooring , to make base of wood / carpet /
Providing & Installation of Floor Shinning including surface prepartion with grinding, application Floor
1 H.N.120
Material
Applying Specs
`TREMIX': Water absorption
vacuum reduction-90%,
dewatering system flooringAbrasion
with resistance-400%,
steel trowel finishTfloor,
bar value
only upto 40%,
labour Im
charge
1 H.N.128.1
-Applying
For Thickness
`TREMIX'of Concrete upto 200 mm
vacuum dewatering system flooring with steel trowel finish floor, only labour charge
1 H.N.128.2
- For Thickness of Concrete more than 200 mm upto 400 mm
1 H.N.129 ="Providing and fixing 3mm thick P.V.C. Vinyl Flooring with anti static propert
1 H.N.130 Deep Cleaning at time of final hand Over to Client of Building Walls (Masonary, C
1 H.N.131 Providing and laying abrasion resisting floor protection membrane on completed
1 H.N.32 Supplying and applying 3 MM epoxy screed after necessary surface preparation (
1 H.N.37 Extra for giving Broom Finish to the Surface of concrete floor as per requireme
1 H.N.44 providing, laying and fixing minimum 10mm thick 600mm *600mm /900mm *900mm
1 I.10 ARMSTRONG “600mmX 600MM X 0.45MM SS MIRROR FINISH METAL Clip In with DP12 Carr
1 I.11 :- INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural
1 I.113 :- Flush fitting
Supplying 1200mm of
& Installation long cross tees
walkway withtoColour
be interlocked between
Coated Profiled mainover
Sheet runners
Poly at 600mm centre to fo
Modular Trap Door :Providing and fixing Modular trap door in false ceiling, made of Moisture resistant
1 I.114.2
:- Opening Size 600x600mm
1 I.115 SHADOWLINE: Providing and Fixing Z Profile (Shadowline stopping bead of mak
1 I.116 Extra for providing & fixing Armstrong Silhouette framing profile in place of 2
1 I.15 All charges for sealing of wall axial Fan/Duct opening with rrquired flashings and
1 I.16 Providing and fixing 1mm thick (BMT)corrugated metal decking for roof slab wit
1 I.19 P/F 400 micron HDPE sheet
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 m
1 I.2.1
:- In 75x75 mm deep chase
1 I.28 Supply and fixing Slope Diversion scheme for Standing Seam Profile over roof she
1 I.3 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concret
1 I.32 P/F 160mm dia PVC (Lead free PVC material to be used) rain water pipe of heavy
1 I.33 P/F 200mm
Fire dia PVC
performance (Lead
- Class 0 /free
ClassPVC material
1 (BS 476) to be used) rain water pipe of heav
1 I.35 Sound Attenuation - 36DB
Providing and fixingSystem
Ceiling Suspension false ceiling at all height including providing and fixing of frame work made of spec
1 I.6.1
:- 12.5 mm
Providing thick
and tapered
fixing edge gypsum
false ceiling plain including
at all height board conforming
providingtoandIS:fixing
2095-ofPart I work made of spec
frame
1 I.6.2
:- 12.5 mm
Providing thick
and tapered
fixing edge gypsum
false ceiling fire resistant
at all height includingboard conforming
providing to IS:
and fixing of 2095-
framePart
workI made of spec
1 I.6.3
:- 12.5 mm thick tapered edge gypsum moisture resistant board
1 I.N.136 Providing and Fixing Dowel bar at construction joints / Expansion joints (16m
Providing laying and fixing in position 3mm thick Extruded Polycarbonate sheets ( UV protected from b
1 I.N.137
:- Major rib
Providing shalland
laying be 28 to 35
fixing mm deep4mm
in position spaced
thickatPlain
180 to 205 mm c/c (Make:
Polycarbonate sheets Sabic/ Palram) from both
(UV protected
1 I.N.138
(Make:
:- Note:Sabic/ Palram)
(Covered area (Plan area/ Elevation area) without lap of finally erected sheeting shall be consid
1 I.N.139
1 I.N.140 :- Note: (Covered area (Plan area/ Elevation area) without lap of finally erected sheeting shall be consid
:- [480 to 500 mm] wide x [160 to 170 mm] Basic Depth. (0.55mm BMT) (Rates should be inclusive of s
1 I.N.141 :-:-Note: (Covered
[480 to 500 mm] area
wide (Plan area/
x [160 to Elevation
170 mm] area) without(0.55mm
Basic Depth. lap of finally
BMT)erected
(Rates sheeting
should beshall be consid
inclusive of s
1 I.N.142 :-:-Note: (Covered area (Plan area/ Elevation area) without lap of finally erected
[480 to 500 mm] wide x [160 to 170 mm] Basic Depth. (0.9mm BMT) (Rates should be inclusive of susheeting shall be consid
1 I.N.143 :-:-Note: (Covered
[480 to 500 mm] area
wide (Plan area/
x [160 to Elevation
170 mm] area) without(0.9mm
Basic Depth. lap of finally
BMT) erected sheeting
(Rates should be shall be consid
inclusive of su
1 I.N.144 :-:-Note: (Covered area (Plan area/ Elevation area) without lap of finally erected
[450 to 500 mm] wide x [50 to 60 mm] Basic Depth. (0.55mm BMT) (Rates should be inclusive sheeting shall be consid
of sub
1 I.N.145 :- Note: (Covered area (Plan area/ Elevation area) without lap of finally erected sheeting shall be consid
:- [450 to 500 mm] wide x [50 to 60 mm] Basic Depth. (0.55mm BMT) (Rates should be inclusive of sub
1 I.N.146
:- Note: (Covered area (Plan area/ Elevation area) without lap of finally erected sheeting shall be consid
1 I.N.147 Supply and Installation of Strip Clad Sheet 0.50 mm BMT , 155 mm wide & 16 mm de
1 I.N.148 Providing and fixing 50mm thick rock wool of 48 kg/m3 density/ 50mm thick Glass
1 I.N.149 Providing and fixing 100mm thick rock wool of 48 kg/m3 density/ 100mm thick Glas
1 I.N.150 P/F flashing /ridges,walls,capping etc made out of 0.55mm BMT MS precoated she
1 I.N.151 P/F flashing /ridges,walls,capping etc made out of 0.55mm BMT MS precoated she
1 I.N.40 Providing and installing Industrial Metal louvers fabricated from 0.60mm color
1 I.N.88 Refixing of Cladding Sheet
12 mm cement plaster of mix :
1 J.1.1
:- 1:6 (1 cement:
Finishing with Epoxy6 fine sand)
paint (two or more coats) at all locations prepared and applied as per manufactur
1 J.10.1
:- On steel work
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufactur
1 J.10.2
:- On concrete work
1 J.17 Providing and applying white cement based putty of average thickness 1 mm, o
1 J.20 Providing & Applying (2 coats of base coat + 2 coats of top coat) and 1 coat of
1 J.21.1 Finishing walls with Acrylic Smooth interior paint of required shade : Asian(Tractor Emulsion) / ICI Dulu
:- New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
1 J.23 Painting with synthetic enamel paint of approved make on structural steel of a
1 J.N.113 Providing and laying 15 mm thick. double coat smooth plaster in 2 coats over ma
1 J.N.39 Providing
b) and fixing
High Density firexGI chiken
coated mesh at
Mineral corners
wool boards , column
50mmheads, junction of brick
Thickness:100mm-2 hours rated. Density 175k
1 K.N.15 c).Highly Fire retardant, Non-Chlorinated Intumescent Firex FBS Firex FBS Fireseal 73,one component fi
Dismantling manually/
d). Mineral wool by mechanical
filler blankets means
for cavity including
sealing aroundstacking of serviceable material and disposal of
the penetrations.
1 L.11.2
:- bituminous road
Dismantling RC / non-pressure NP2 class (light duty) R.C.C pipes with collars joints with stiff mixture of
1 L.18.1
:- upto 600 mm diameter
1 L.2 Demolishing R.C.C. work manually/ by mechanical means including stacking of ste
1 L.3 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and
1 L.4.1
:- In cement mortar
1 L.6 Dismantling steel work in built up sections in angles, tees, flats and channels in
1 L.N.82 Disposal of building rubbish / malba / similar unserviceable, dismantled or wast
1 M.1 Preparation and consolidation of sub grade with power road roller of 8 to 12ton
1 M.12 Providing, laying, spreading and compacting graded stone aggregate (size range
1 M.15 Taking out existing CC interlocking paver blocks from footpath/ central verge,
1 M.16 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in
1 M.18 Providing and installing as specified, Stainless Steel Signage Plates with markin
1 M.57 Prime coat (Providing and applying primer coat with bitumen emulsion on prepar
Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion press
1 M.58.1
:-On WMM
Providing surface
and applying@ 0.4
tackkg./sqm.
coat using bitumen emulsion conforming to IS: 8887, using emulsion press
1 M.58.2
:-On bituminous surface @ 0.25 kg/sqm.
1 M.6 Providing and applying 2.5 mm thick road marking strips (retro- reflective) of s
1 M.61 Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and
1 M.8 Providing and laying at or near ground level factory made kerb stone of M-25 gr
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including str
1 M.9.1
:- Made of G.I. wire of dia 4 mm
1 M.N.24 ="Providing and laying of 75 mm compacted thickness of Dense Bituminous maca
1 M.N.25 ="Providing and laying Semi Dense Bituminous Concrete of 25 mm compacted thic
1 M.N.42.1 Construction of granular sub-base by providing close graded Material conforming
1 M.N.44 Providing and laying 80mm thick factory made cement concrete interlocking pave
1 M.N.47 Supplying,stacking & spreding of 25 to 40mm size crushed Metal, in desired thickne
1 M.N.50 Providing and fixing 65mm thk. Interlocking Grass Concrete Paver Block of M-30
1 M.N.55 Providing and fixing , jointing Precast concrete Saucer drain including cost o
1 M.N.81 Providing and fixing rain water Gutter fabricated out of Galvalume sheet with
1 M.N.82 Extra for Providing & Laying various surfaces (Pebble Rock Road, Village Road,
1 M.N.83 Providing and laying Multifilament Woven geotextile made of Polypropylene, GWF
1 N.11 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of app
1 N.149 Providing and fixing ISI marked (IS:1729) deep seal sand UPVC trap of self clea
1 N.24 Supply and fixing doppler automatic water tap 220 V sensor bib cock
1 N.33 Providing & Fixing wall mounted SS 304 mat finish heavy dutymanual liquid soap
1 N.35 Providing and fixing Stainless Steel A ISI 304 grade sink (1.8mm thick) as per I
1 N.39 P/F CP stainless steel cockroach trap Jali with P trap 100mm-150mm dia of appr
1 N.8.2.1 Providing and
Providing and Installing
fixing P.V.C. waste pipe
NUGREEN for sink
SS 304 or wash
Grease basinNGT-100
separator including"Under
P.V.C. wa
Sink"
1 N.N.174 according to relevant Standards, made of SS 304 - 2MM THICK For free standing installation and smoo
Providing
Dimensionand556fixing
(W) xC.P.
762brass push(H).
(L) x 537 bib cock of approved quality conforming to IS:8931 :Make- Jaguar,
1 N.N.188
:- 15 mm nominal bore
1 N.N.189 Providing and fixing C.P. brass elbow operated leaver bib cock of approved qua
1 N.N.190 Providing and fixing ISI marked CP brass bib cock with wall flange of approved
1 N.N.191 Providing and fixing C.P. brass pillar cock of approved quality conforming to
1 N.N.192 Providing and fixing 15mm dia CP brass wall mounted Sink cock with swinging
1 N.N.193 Providing and fixing C.P. brass two way Bib cock of approved quality conformi
1 N.N.194 Providing and fixing 8mm dia CP brass Health faucet for ablution with 1.2 m. lo
1 N.N.195 Providing & Fixing Bottle trap with internal partition 32 mm size with 300mm &
1 N.N.196 Providing and fixing of water tap Pillar cock Auto Closing System for Wash Bas
1 N.N.197 Providing and fixing of hand drier of approved make (Jaquar Make Model No-H
1 N.N.198 Providing and fixing of W.C. Metropole Flushing Valve Regular 32mm Size (Concea
1 N.N.199 Providing and fixing of Urinal Valve Auto flushing/Closing System with Built-in
1 N.N.200 Providing, fixing, testing & commissioning of automatic flushing system for u
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P o
1 N.N.201
:- White Vitreous
Providing and fixingchina Orissa
white pattern
vitreous W.C. pan
European typemodel: ECH-WHT-451LE
W.C. pan with all fittings and fixtures complete, inclu
1 N.N.202
:- W.C. pan with ISI marked white solid plastic seat and
Providing and fixing white vitreous European type W.C. pan with lid of makeall jaquar
fittingsmodel CNS-WHT-963SPP
and fixtures or
complete, inclu
1 N.N.203
:- W.C. pan with ISI marked white solid plastic seat and lid of make Hindware model popular20044.
1 N.N.204 Supply & Fixing white vitreous china flat back urinal of make Jaquar model URS
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste
1 N.N.205
:- White Vitreous
Providing and fixingChina
washWash
basinbasin
with (make: Jaquar15
C.I. brackets, Model : SLS-WHT-6801
mm C.P. or Equivalent
brass pillar taps, 32 mm C.P.as brass
per approva
waste
1 N.N.206
:- White Vitreous China Wash basin (make: Jaquar Model : SLS-WHT-6305 or Equivalent as per approva
1 N.N.60 Providing and fixing in position square mouth stoneware gully trap of 100 mm x
 Providing and fixing Soil, waste and vent UPVC pipe (Type-A) confirming IS: 13592 Supreme or Finolex m
1 O.11.2
:- 75mm dia,
Providing andnominal
fixing Soil,borewaste and vent UPVC pipe (Type-A) confirming IS: 13592 Supreme or Finolex m
1 O.11.3
:- 100mm dia, nominal bore
Supply & installation of terrace tank made of virgin plastic, triple layer body, Fire retardant; tank outer
1 O.14.2
:- 1000 Liter
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold
1 O.2.1
:- 15 mm
Providing andnominal
fixingouter dia Pipes
Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold
1 O.2.2
:- 20 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold
1 O.2.3
:- 25 mm and
Providing nominal
fixingouter dia Pipes
Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold
1 O.2.4
:- 32 mm nominal outer
Providing and fixing G.I. pipes dia Pipes
complete with G.I. fittings including trenching and refilling etc. External w
1 O.6.6
:- 50 mm and
Providing dia nominal
fixing G.I. bore
pipes complete with G.I. fittings including trenching and refilling etc. External w
1 O.6.8
:- 80 mm dia nominal bore
1 O.N.17.2 Providing and fixing gun metal gate valve with C.I. Wheel of approved quality
1 O.N.34.1 Providing & Fixing GI rain water pipe of medium class all fittings. (I/c bends, s
1 O.N.34.2 Providing & Fixing GI rain water pipe of medium class all fittings. (I/c bends, s
Providing, fixing, jointing, testing and commissioning CPVC (Chlorinated Poly Vinyl Chloride) water supp
1 O.N.42.2
:- 50 mm dia
Providing and fixing C.P brass long body bib cock of approved quality conforming to IS: standards and w
1 O.N.53
:- 15 mm nominal bore
1 O.N.54 Providing and fixing angular stop cock of approved quality conforming to IS: s
P/L cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40mm nominal size)
1 P.1.1
:- 100 mm dia.
1 P.13 Providing orange colour safety foot rest of minimum 6 mm thick plastic encaps
Making connection of drain or sewer line with existing manhole including breaking into and making go
1 P.17.2
:- For pipes
Making 250 to 300
connection mm diameter
of drain or sewer line with existing manhole including breaking into and making go
1 P.17.3
:- For pipes 350 to
Constructing brick masonry450 mm road
diameter
gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 ceme
1 P.18.1
Providing and laying Non Pressure(non
:- With common burnt clay F.P.S. NP-3modular) bricks duty)
class (Medium of class designation
R.C.C. 7.5
pipes including collars/spigot jointe
1 P.19.1
:- 450 mm dia RCC pipes.
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointe
1 P.19.2
:- 600 mmand
Providing dialaying
RCC pipes.
Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointe
1 P.19.3 Providing
:- 900 mmand diafixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry c
RCC pipes.
1 P.2.3.1 :- 180x150 mm size P type
Providing and laying
:- With common burntNon Pressure
clay NP-4modular)
F.P.S. (non class (Heavy duty)
bricks R.C.C.
of class pipes including
designation 7.5 collars/spigot jointed
1 P.20.4
:- 1000 mm dia RCC pipes.(Laying by mannual/ machenical means)
Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed
1 P.20.5
:- 1200 mm
Providing anddia RCC Cowel
fixing pipes. at
(Laying by of
the top mannual/ machenical
rainwater/vent pipesmeans)
(P.V.C. OR C.I.) as per design of dia(Lead
1 P.22.2
:- 200mm.
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixtu
1 P.3.2
:- 150 mmand
Providing dia.laying
R.C.C.non-pressure
pipe NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixtu
1 P.3.3
:- 250 mm dia. R.C.C. pipe
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixtu
1 P.3.4 Extra
:- 300for
mm depth for manholes
dia. R.C.C. pipe :
1 P.5.1.1 :- Size 90x80 cm
1 P.79.1 Providing & fixingburnt
:- With common L Shaped parapet
clay F.P.S. type
(non roof drain
modular) as of
bricks perclass
satisfaction of EIC
designation 7.5(Body Material-Cast Iron
:-Outlet pipe diameter 100mm
Providing & fixing L Shaped parapet type roof drain as per satisfaction of EIC (Body Material-Cast Iron
1 P.79.2
:-Outlet
Providingpipe diameter
& fixing 150mm
L Shaped parapet type roof drain as per satisfaction of EIC (Body Material-Cast Iron
1 P.79.3 Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cem
:-Outlet pipe diameter 200mm
1 P.N.100 :- 1.68formdepth
Extra deep with C.I. cover: and frame (Heavy duty - Weight of cover shall not be less than 108 kg) 5
for manholes
1 P.N.101 :-
:- circular manhole 1.22clay
With common burnt F.P.S. (non
m internal dia modular) bricks of class designation 7.5
Constructing
:- With common burnt clay F.P.S. (nonConcrete
RCC manhole in cement modular)M25 grade
bricks including
of class R.C.C. top
designation 7.5 slab, foundation concre
1 P.N.102
:- Inside size 90x80 cm and
Extra for depth for RCC manholes : 45 cm deep including C.I. cover (Heavy duty - Weight of cover shall not be
1 P.N.103
:- Size 90x80 RCC
Constructing cm circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement Conc
1 P.N.104
Extra for depth with
:- 1.68 m deep for RCCC.I.manholes
cover (Heavy: duty - Weight of cover shall not be less than 108 kg) 560 mm inte
1 P.N.105
:- circular
Supply andmanhole 1.22 of
construction m internal dia Concrete Manhole, without shaft having chamber of diameter
RCC Precast
1 P.N.106
:- With and
Supply invert depth uptoof2000
construction RCCmm Precast Concrete Manhole, without shaft having chamber of diameter
1 P.N.107
:- With invert depth more than
Supply and construction of RCC Precast 2000 mmConcrete
upto 2500 mm without shaft having chamber of diameter
Manhole,
1 P.N.108
:- With invert depth more than 2500 mm upto 3000 mm
1 P.N.14.4 Supply and fixing of 560 mm diameter C.I. cover including frmae (heavy duty) th
Providing and laying NP3 Class Hume pipe with collar at road crossings including necessary saddles, exc
1 P.N.23.5
:-750mm dia.
1 P.N.92 Supplying, fabricating, delivering & Fixing at desired locations, GI Pipe inser
1 P.N.93 Providing and Fixing SFRC precast Concrete Covers without Frames in Concrete G
1 P.N.94 Supplying, fabricating, delivering & Fixing at desired locations, 20mm dia SS Ru
Providing and fixing Soil, waste and vent UPVC pipe (Type-A) confirming IS: 13592 Supreme or Finolex m
1 P.N.95
:- 160mmand
Providing dia,fixing
nominal Soil,bore
waste and vent UPVC pipe (Type-A) confirming IS: 13592 Supreme or Finolex m
1 P.N.96
:- 210mm dia, nominal bore
Providing and fixing Soil, waste and vent UPVC pipe (Type-A) confirming IS: 13592 Supreme or Finolex m
1 P.N.97
:- 300mm dia, nominal bore
1 P.N.98 Providing andbrick
Constructing laying NP3 Class
masonry Hume in
manhole pipe with collar
cement mortar at1:4
road
( 1crossings
cement :including
4 coarse sand ) with R.C.C. top
1 P.N.99 :- Inside size 90x80 cm and 45 cm deep including C.I. cover (Heavy duty - Weight of cover shall not be
Boring,
:- With providing
common burntand installation
clay F.P.S. bored cast-in-situ
(non modular) reinforced
bricks of class cement concrete
designation 7.5 piles of grade M-30 of
1 Q.N.36.1
:- 450 mm dia piles
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-30 of
1 Q.N.36.2
:- 600 mm
Boring, dia piles
providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-30 of
1 Q.N.36.3
:- 750 mm dia
Boring, providing piles
and installation bored cast-in-situ reinforced cement concrete piles of grade M-30 of
1 Q.N.36.4
:- 900 mm dia piles
Driving, providing and installation Driven cast-in-situ reinforced cement concrete piles of grade M-30 o
1 Q.N.37.1
:- 450 mm
Driving, dia piles.
providing and installation Driven cast-in-situ reinforced cement concrete piles of grade M-30 o
1 Q.N.37.2
:- 600 mm dia piles.
Driving, providing and installation of Spun Precast reinforced cement concrete piles of grade M-80 of s
1 Q.N.38.1
:- 400 mm
Driving, dia piles.
providing and installation of Spun Precast reinforced cement concrete piles of grade M-80 of s
1 Q.N.38.2
:- 600 mm dia piles.
1 Q.N.39 Extra overand
Providing above Piling
fixing work items
aluminium workforfor
conducting
windows,all required tests
ventilators as per applic
and partitions with extruded built up sta
1 R.1.1.2 :- For fixed portion
1 R.11 :- Powder
Supply coated aluminium
of Stainless steel Level(minimum
D Type handlethickness of powder
of Dorset make coating
( Double50Side)
micron)
1 R.12 Supply of 100mm S.S.Hinges of Haffle
1 R.123 Providing and fixing double glazed hermetically sealed glazing in aluminium win
1 R.13 Supply of Door stopper (Dunex make) with necessary screws etc complete.
1 R.14 Supply of Dead Lock (Dorset) with all necessary screws etc. complete.
1 R.149 Supply & Installation of 100 mm thick Puff Panel as included specifications, Panel Thickness -100mm, S
1 R.15 Supply of S.S.Level handle (Dorset) with all necessary screws etc. complete.
1 R.152 Extra for providing frosted glass (Toughened glass cost to be paid in respective
1 R.16 Supply of Dead Lock for S.S.Level handle (Dorset make Model:- SDORSS) with al
1 R.17 Supply of Euro Profile Cylinder for Dead Lock (Dorset) with all necessary screws
1 R.19 Fixing of Stainless steel Level D Type handle of Dorset make ( Double Side) 3
1 R.20 Fixing 100mm S.S.Hinges of Haffle
1 R.21 Fixing Door stopper (Dunex make) with necessary screws etc complete.
1 R.22 Fixing Dead Lock (Dorset) with all necessary screws etc. complete.
1 R.23 Fixing of S.S.Level handle (Dorset) with all necessary screws etc. complete.
1 R.24 Fixing Dead Lock for S.S.Level handle (Dorset make Model:- SDORSS) with all ne
1 R.25 Providing S.S. Tower bolt - 200mm
1 R.26 Fixing S.S. Tower bolt - 200mm
1 R.27 Fixing of Euro Profile Cylinder for Dead Lock (Dorset) with all necessary screws
Providing Door Closer
1 R.28.1
:- Dorma
Fixing Doormake
CloserTS 68
1 R.29.1
:- Dorma make TS 68
1 R.40 Providing & Fixing Aluminium tower bolts anodised (AC10) 250X10
1 R.48 Providing and fixing Aluminium Powder coated Louvers With required shape and a
1 R.49 P/F mosquito net
1 R.51 P/F laminated sliding folding partition with aluminium channel Dorma make
1 R.52 P/F sound proof sliding folding partition with leatherite fabric panel and alu
Providing and fixing glazing in door,window, ventilator shutters and partitions etc. with EPDM rubber /
1 R.54.1
:- With toughened glass panes of 6 mm thickness
 Providing and fixing glazing in door,window, ventilator shutters and partitions etc. with EPDM rubber /
1 R.54.3
:- With toughened glass panes of 12 mm thickness
1 R.8 Providing and fixing 12 mm thick frameless toughened glass door shutter of appr
1 R.N.164 Providing and fixing of PAPER HOLDER (Jaquar:ASH-1553 or Equivalent as per ap
1 R.N.165 Providing and fixing of towel ring (Jaquar:AQN-7721 or Equivalent as per approv
1 R.N.166 Providing and fixing of towel rail (Jaquar:ACN-1101N or Equivalent as per approv
1 R.N.167 Providing and fixing of Twin coat hook (Jaquar:CAN-CHR-1161N or Equivalent as
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ ex
1 S.1.1
:- Serrated with central bulb (225 mm wide, 8-11 mm thick)
1 S.11 Providing & applying 2mm thick FRP Coating on metal/RCC surfaces as per specif
Providing and fixing Supercast SW20 to prevent the passage of water through non-construction joints b
1 S.13
Supercast SW20 shall be fixed at a depth of 100mm below from the top cover of the grade slab and fix
1 S.15 Providing and applying PU grouting with Sika 101/102 waterproofing compound
1 S.2 Providing and laying water proofing treatment in sunken portion of WCs, bathro
1 S.7 Supplying & Applying of Kemperol V210 system for sealing of all types of junctio
1 S.8 Supplying & applying of Waterproofing of metal/concrete surface of Gutter a
Providing and laying of roof tiles of 10 mm thick mat finish Vitrified tile of Orient bell (Cool roof tiles SR
1 S.81
Make: Orient Bell,Type: Cool Roof vitrified Tile,Thickness- 10mm,SRI- 103,Water Absorption- <0.5%,Re
1 S.N.38 Providing and laying on sunken areas broken light weight concrete block bats/li
Treatment of Cracks:- Providing and Sealing the cracks in the concrete surface after opening the cracks
1 S.N.65 Providing & mixing of integral and
water proofing
Injection Grouting:- Providing grouting thecompound in fixing
cracks after RCC concrete (like raft,
the injection portswall & slab etc) to lo
at predetermine r
1 S.N.87 watertightness to structures. Make shall be BASF,CICO,Fosroc or equivalent.
1 S.N.88 (The
Coving volume of concrete
: Providing in which
and applying this compound
epoxy is beingofused
screed for making 75mm shallcoving
be measured
in bet under this item. The
Terrace Waterproofing
1 S.N.89
:- Waterproofing:
Tensile Providing
strength (Peak) ASTMand applyingN/mm2
D412-11.6 waterproofing of Fosroc / Durabuild / Asian or equivalent ma
1 S.N.90
Elongation (Peak) ASTM D412- : 600%
1 S.N.91 Providing and Applying high performance polymer modified cementitious coating
1 T.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm
1 T.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in th
1 T.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm i
1 T.N.18.1 Providing, fixing, jointing, testing and commissioning PVC (Class III) of pressu
Aligning to correct location, drilling for BORE HOLE of Dia 300mm with mechanical means including pro
1 T.N.20
Rain Water Recharge Pit From 30 to 60 m below FGL
1 U.246 Hiring charges of hydra for erection of structural steel at height more than 2 me
1 U.253 Hire & Running Charges for Tipper
1 U.6 Hiring Charges of JCB
1 U.N.14.2 Design, manufacturing, supply and installation of underground GI raceways including Junction Boxes &
100mm x 40mm x 2.0 thick with two compartment made from 2.0 mm thick G.I. sheet complete
1 U.N.160 Providing & fixing Life line system with 8mm steel wire & post at every 10m inter
1 U.N.470 Providing and fixing birds mesh / net in industrial Shop, of material Nylon / Po
1 U.N.471 Providing and Fixing Foot Operated Door Opener of Synthetic Enamel painted M
1 U.N.472 JCB Hire Charges including all consumable as well as driver and operator.
1 U.N.473 Hydra
The Hire Charges
Periphery packingincluding
shall beall consumable
provided as well as driver
with continious and of
PVC fillet operator.
forex plastic or appropriate EPDM
1 W.N.16 The Periphery of the ACP shall be sealed with Silicone Sealant ( Non
The system should also provide for pressure equalisation. The details for pressure staining ) shallequalization
be of make toDOW
be suc
1 W.N.5.1 The fixing
All Screws, of the panels shall be designed in such a way that they come in plane with the glass panels.A
The systemBolts,
shouldNuts
alsoand Washers
provide used in the
for pressure glazing shall
equalisation. Thebedetails
only offorstainless
pressure steel.
equalization to be su
1 W.N.5.4 The Expansion
All Screws, joints
Bolts, Nutsbetween two mullions
and Washers should
used in the be created
glazing shall beby inserting
only minimum
of stainless steel.250mm long Alum
1 X.N.105 The Expansion
Removing joints
existing between
trees havingtwoanymullions should
girth in the plotbe created
with by inserting
the required minimum 250mm long Alum
machiner
1 X.N.106 Removing & Re-Planting of Existing trees/plants up to any height & Size, location
Quantity UOM
692,191 M^3
1,104,051 M^3
454,041 M^3
78,557 M^3
438,125 M^2
834,967 M^3
35,504 M^2
91,809 M^2
483,924 M^3
16,302 M^3
66 M^2
30,629 M^2
34,231 M^2
31,996 M^2
13,368 M^2
22,780 M^2
743 M^2
61,725 M^3
2,661 M^3
1,189 M (meter)
1,169 M (meter)
1,189 M (meter)
4,259 M (meter)
2,294 M^3
10,413 M^3
341 M (meter)
19 M (meter)
19 M (meter)
94 M (meter)
15,702 M^2
6 EA (each)
28 EA (each)
18 EA (each)
8 EA (each)
19,502 M (meter)
38,757 M (meter)
6,543,123 KG
662,771 KG
4,088 M (meter)
405 M^3
29 M^3
13,019 M^3
 7,813 M^3
869 M^3
3,180 M (meter)
22,617 KG
480 RMT
1,888 M^2
1,591 M^2
1,453 M^2
4,310 M^3
863 M^3
266 M^2
36 M^2
404 M (meter)
114 M^2
97 M^2
322 M^2
60 M^2
569 M (meter)
65 M (meter)
25 M^2
300 RMT
936 M^2
936 M^2
940 M^2
1,995 M^2
119 M^2
487 M^2
206 M^2
104 M^2
345 M (meter)
867 M^2
297 M (meter)
477 M^2
138 M^2
116 M^2
42 M^2
198 M^2
40 M^2
32 M^2
42 M^2
136 M^2
20 M^2
1,090 M^2
1,585 M (meter)
880 EA (each)
 444 EA (each)
132 M^2
132 M^2
14 EA (each)
8 EA (each)
20 EA (each)
202 M^2
225 M^2
14 NOs
28 M^2
15 M^2
502 M (meter)
283 M^2
37 M^2
72 EA (each)
15 EA (each)
1,004 M^2
219 M (meter)
5 EA (each)
5 EA (each)
38 EA (each)
38 EA (each)
38 EA (each)
38 EA (each)
38 EA (each)
75 EA (each)
272 EA (each)
38 EA (each)
38 EA (each)
38 EA (each)
38 EA (each)
1,124,946 KG
1,882 EA (each)
3,282 M^2
21 EA (each)
98,511 KG
148,748 KG
146,362 KG
28 EA (each)
38 M^2
781 MT
1,854,821 KG
4,298,369 KG
6,783,364 KG
3,989,247 KG
10,142,437 KG
861 MT
1,882 NOs
30,225 M^2
31 RMT
10 M^2
15 RMT
38 M (meter)
1,131 MT
178,282 KG
62 M^3
37 M (meter)
157 M^2
335 M^2
132 M^2
1,194 M^2
579 M^2
3,906 M^2
1,104 M^2
4,203 M^2
88,810 M^2
198 M^2
225 M^2
40,099 M^2
69,472 M^2
69,472 M^2
48 M^2
83,294 M^2
83,320 M^2
8,989 M^2
40,612 M^2
3,100 M^2
1,104 M^2
1,329 M^2
14,754 M (meter)
14 EA (each)
132 M (meter)
1,975 M^2
1,954 M (meter)
5,280 M^2
138,943 M^2
112 M (meter)
2,662 M^2
51 EA (each)
295 M (meter)
 2,028 M (meter)
126 M^2
277 M^2
264 M^2
126 M^2
2,246 RMT
23,239 M^2
1,281 M^2
39,193 M^2
39,193 M^2
57,623 M^2
57,623 M^2
31,028 M^2
31,028 M^2
84,427 M^2
93,073 M^2
2,662 RMT
55,469 M^2
55,469 M^2
6,012 M^2
6,012 M^2
150 M^2
851 M^2
30,378 M^2
259 M^2
94 M^2
21,478 M^2
21,283 M^2
32,573 M^2
10,835,621 KG
21,283 M^2
2,369 M^2
13 M^2
75 M^2
19 M (meter)
94 M^3
1,787 M^2
57 M^3
37,698 KG
24,105 M^3
162,605 M^2
36,133 M^3
592 M^2
592 M^2
6,906 IN^2 (square inch)
65,112 M^2
65,112 M^2
65,112 M^2
4,265 M^2
65,112 M^2
1,036 M^3
13,915 M^2
4,883 M^3
65,112 M^2
65,594 M^3
65,716 M^2
48 M^3
4,634 M^2
14,831 M^2
2,265 M^2
15 M^2
789 M^2
127 EA (each)
199 EA (each)
24 EA (each)
96 EA (each)
59 M^2
208 EA (each)
21 EA (each)
5 EA (each)
202 NOs
52 NOs
24 NOs
4 NOs
4 NOs
17 NOs
34 NOs
566 NOs
4 NOs
18 NOs
123 NOs
32 NOs
6 NOs
103 NOs
18 NOs
18 NOs
286 NOs
11 NOs
11 NOs
87 EA (each)
 803 M (meter)
1,300 M (meter)
38 EA (each)
303 M (meter)
452 M (meter)
376 M (meter)
397 M (meter)
77 M (meter)
77 M (meter)
45 EA (each)
31 M (meter)
204 M (meter)
128 M (meter)
24 NOs
24 NOs
33 M (meter)
9,391 EA (each)
4 EA (each)
4 EA (each)
742 EA (each)
7,523 M (meter)
2,561 M (meter)
427 M (meter)
8 EA (each)
854 M (meter)
1,518 M (meter)
125 EA (each)
2,260 M (meter)
342 M (meter)
5,334 M (meter)
185 M (meter)
13 EA (each)
31 EA (each)
63 EA (each)
194 NOs
189 RMT
468 NOs
185 RMT
97 NOs
95 RMT
39 NOs
39 NOs
20 NOs
41 EA (each)
1,281 M (meter)
 192 KG
267 M^3
19 NOs
7,533 RMT
112 RMT
13 RMT
512 RMT
468 NOs
7,600 RMT
14,107 RMT
14,023 RMT
9,226 RMT
12,636 RMT
26,290 RMT
2,864 RMT
6,600 RMT
57 NOs
3,639 KG
62 EA (each)
219 EA (each)
66 M^2
106 EA (each)
106 EA (each)
238 M^2
34 EA (each)
1,818 M^2
34 EA (each)
184 EA (each)
62 EA (each)
219 EA (each)
106 EA (each)
106 EA (each)
34 EA (each)
34 EA (each)
63 EA (each)
63 EA (each)
184 EA (each)
167 EA (each)
167 EA (each)
95 EA (each)
6,219 KG
150 M^2
30 M^2
30 M^2
3,029 M^2
 28 M^2
40 M^2
34 NOs
18 NOs
18 NOs
17 NOs
4,502 M (meter)
112 M^2
1,863 M (meter)
600 EA (each)
1,022 M^2
128 M^2
72 M^2
9,927 M^2
461 M^3
56 M^2
36,156 M^3
705 RMT
10,043 M^2
17,303 M^2
3,332 M^2
84 M^3
28 M^3
100 M^3
134 M (meter)
1,450 RMT
26 per day
178 per hour
19 per day
970 M (meter)
2,538 M (meter)
59,409 M^2
167 NOs
149 Hour
208 Hour
10 M^2
50 M^2
5 M^2
803 EA (each)
803 EA (each)