1475XL

“EVO” TrenchIntel
DGPS guidance system:
Extra high precision 3D GPS system
Automatic depth and grade control
TrenchTronic 4.0
Electronic Control with:
Operator selectable digging
pressure and automatic operation
Re.M
Remote Control with:
Machine data remote monitoring
Fleet location management
Autosteering to a predefined path Fully automatic operation Troubleshooting information
Pass optimization and fleet control Remote diagnostic system Operating conditions
13 cm]]
[213
[2
+15°
7 15°
-1

TRENCHING FEATURES AND '-0"

DIMENSIONS APPLICATIONS
The Rock Hawg version of the 1475 model has been designed for MODULAR
0-50 cm
0-1’8’’

MACHINE
13’ 9’’ continuous surface mining in rock, where its 13’ 9” (420 cm) wide
420 cm drum is employed in bulk-excavations projects, open-pit quarries, and
SAME TRACTOR FRAME
very large diameter pipelines. Equipped with TrenchTronic 4.0, the FOR DIFFERENT
ATTACHMENTS

1475 RH is Tesmec’s largest Rock Hawg featuring a 630 hp engine.

It can work up-cutting or down-cutting by simply changing the
attachment.

BULK EXCAVATION WORKS TUNNEL WORKS

RAILWAY SOIL PREPARATION SURFACE MINING

SOIL RECLAMATION CHANNEL EXCAVATION

 39'-5"
[1202cm]
36'-4"
[1108cm]
15'-11"
[485cm]

LAVORO / OPERATION
18'-5"
[369cm] TRASPORTO

[446cm]
TRANSPORT

14'-8"
[378cm]
12'-5"
12'-1"

[562cm]
DOWN-CUTTING

17°
[71cm]
2'-4"
MAX [50cm]
C.O.G position
(lifted drum)

1'-8"
Track 2'-6" [76cm]
3'-4"
[101cm] 11'-6" [350cm]
15'-6" 10'-5" Total cut width 13'-9"
[473cm] [319cm] [420cm]

39'-6" 15'-2"
[1204cm] [463cm]
18'-9"
36'-5" [572cm]
[1110cm]
15'-11"
[485cm]

LAVORO / OPERATION
UP-CUTTING

18'-5"
[369cm] TRASPORTO

[446cm]
TRANSPORT

14'-8"
[378cm]
12'-5"
12'-1"

[562cm]
17°
[71cm]
2'-4"
MAX [50cm]

C.O.G position
(lifted drum)
1'-8"

Track 2'-6" [76cm]

3'-4"
[101cm] 11'-6" [350cm]
15'-6" 10'-5" Total cut width 13'-9"
[473cm] [319cm] [420cm]

15'-2"
[463cm]

1475XL “EVO” ROCK HAWG

TECHNICAL SPECIFICATIONS
Fuel consumption.......34.6 gal/hr (131 l/hr) at full load
Standard Features Cooling rating adequate for 130° F (54.4° C) ambient
Hydraulic Transmission
Pressurized cab with air conditioning, heating, sound air temperature Pressure and flow compensated (load sensing)
suppression Air cleaner: dry type, centrifugal precleaner with Pump flow maximum......................45 gpm (170 l/min)
Elevating cab module with roll over protection (ROPS) primary and secondary filters Pressure setting..............................2.500 psi (172 bar)
Battery box and toolbox with locking door Oil tank capacity....................................191 gal (723 l)
Fuel and hydraulic tank: aircraft quality locking caps Operating and Transport Weight
Flywheel gearbox and hydraulic tanks: pressurized with Weight....240,000-255,000 lbs (108.861-115.665 kg) Cross Conveyor (up-cutting only)
5 psi (0.3 bar) filtered breathers Ground pressure.....21.5-22.84 psi (1,51-1,60 kg/cm2) Hydrostatic: one pump and two motors
Vibration isolator mount: used on engine, radiator, oil Note: dependent on configuration and options Reversible and shiftable
cooler, and exhaust silencer Belt speed infinitely variable...0-900 fpm (0-275 m/min)
Stabilizers / dirt drags (chainsaw only): automatically Trencher Drive Discharge direction: right or left
adjust to terrain changes
Hydrostatic: four pumps and two motors capable of Conveyor belt width...........................2’ 12” (91.4 cm)
Lights: 24 V forward facing transmitting full engine horsepower Conveyor length..................................14’ 9” (450 cm)
Hydraulic cooler externally mounted Flywheel gearboxes, shaved, helical gearing, case Discharge height.....................................7’ 7” (231 cm)
Electrical system: 24 V hardened for extreme shock load
5 operator selectable digging speed ranges: Transport Dimensions
Trenching Dimensions
..............................................0-206 fpm (0-63 m/min) Length with drum installed
Drum diameter.......................................6’ 2” (188 cm) ..............................................0-355 fpm (0-109 m/min) • with drum guard.............................39’ 5” (1202 cm)
Excavation Width...................................13’ 9” (420 cm) ..............................................0-440 fpm (0-134 m/min) • without drum guard........................36’ 4” (1108 cm)
Excavation Depths Range...................0-1’ 8” (0-50 cm) ..............................................0-530 fpm (0-162 m/min) Length without drum (only Tractor)......30’ 11” (943 cm)
Max recommended digging depth for maximum ..............................................0-595 fpm (0-181 m/min) Width with drum installed.................13’ 9” (420 cm)
productivity...............................................1’ 2” (35.6 cm) Cutters: rotary carbide tipped 1 ½” (3.81 cm) shank Width without drum..........................13’ 6” (411 cm)
Note: max excavation depth can be increased upon request diameter 3” (7.62 cm) gage Width without digging motors.............11’ 6” (350 cm)
Drum tool tip diameter........................6’ 2” (188 cm) Height with cab...................................12’ 5” (378 cm)
Engine
Height with cab elevated ...................14’ 8” (446 cm)
HIGHLY REGULATED COUNTRIES (EU, USA) Crawler Drive
Model...............CAT C18 ACERT Tier 4 final/Stage IV Dual path, hydrostatic drive, planetary transmissions Main Available Devices
Max horsepower................................630 hp (470 kW) capable of full counter rotation with single lever ALL001 Air compressor
Max no load rpm..........................................2.000 rpm steering, single lever direction
ALL010 Automatic greasing
Fuel tank capacity.................................420 gal (1.590 l) Infinitely variable speed, forward and reverse:
Urea tank capacity...................................25 gal (94.6 l) • High range.....................0-1.54 mph (0-2.47 km/hr) ALL012 Safety devices (flashing light, rear-view mirror,
external emergency buttons)
Fuel consumption.....32.5 gal/hr (122.9 l/hr) at full load • Low range.....................0-0.77 mph (0-1.24 km/hr) ALL015 Pnemuatic greasing
Estimated max urea consumption at full load................ Integral parking and service brake: spring applied,
hydraulic release, wet disc brake OPT002 Fuel pump
..............................................3,5% of fuel consumption
Cooling rating adequate for 130° F (54.4° C) ambient OPT003 Water spray dust suppression system
air temperature Tracks OPT011 Subscription for the Remote Asset Management
Air cleaner: dry type, centrifugal precleaner with Overall track length..............................15’ 6” (473 cm) (monitoring via GPRS) per year
primary and secondary filters Track pad type: double demi-grouser (single grouser OPT012 Work light package
LESSER-REGULATED COUNTRIES available as option) OPT014 Video Camera
Model..........................................CAT C18 ACERT Tier 3 Track chain type: Caterpillar 365/374 (1” 1/8 bolts) OPT015 3DGPS System for automatic machine guidance
Max horsepower................................630 hp (470 kW) Track pad width.........................................2’ 6” (76 cm) OPT018 Closed engine doors
Max no load rpm..........................................2.100 rpm OPT023 Remote control for maintenance
Fuel tank capacity................................420 gal (1.590 l) OPT025 Oil pump
For a complete devices list see the Available Devices chart
Keep you updated on: www.tesmec.com
09/18 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE