Performance Test
Specific Instruction for the Candidate
Qualification COMPUTER SYSTEMS SERVICING NC II
Unit of Competency Set-Up Computer Networks
PLEASE READ CAREFULLY:
General Instruction:
The trainee must be able to perform the given task
within 3 hours.
Given the information and necessary materials the candidate
must be able to perform the following
Set-Up Computer Networks
Set Router/Wi-Fi/Wireless Access Point/Repeater
Configuration
1. Given the necessary tools, equipment, supplies and materials
and safety paraphernalia, the candidates is required to prepare
the following :
2. The trainer will allow 20 minutes for you to familiarize yourself
with the resources to be used in this demonstration.
3. The assessment shall be based on the units of competency in the
training regulations and the evidence plan and shall focus on the
following evidence gathering methods :
Demonstration/observation with oral questioning and written test
4. Trainer may perform oral questioning of the candidate before or
after the performance of the tasks.
5. The trainer shall provide feedback of your performance at the
end of the assessment. The feedback shall indicate whether you
are competent or not yet competent.
LIST OF EQUIPMENT TOOLS AND MATERIALS
QTY DESCRIPTION
EQUIPMENT
26 units Desktop Computer
10 Laptop computer/Netbook
10 Computers for server
10 Server cabinet/Frame
20 pcs Patch panel (48-ports)
10 sets Working tables
1 unit Internet subscription (at least 2 MBPS)
10 units Uninterruptible Power Supply (UPS)
10 unit Hub / Switch
2 units Managed switch
1 Network controller
11 ADSL Router with Wi-Fi
10 Wireless Access Point
1 unit PC Video PC Video camera
camera
2 units External External optical drive
optical drive
1 unit USB USB External HD
External HD
1 unit Network Network External HD
External HD
1 unit Network Network printer
printer
11 pieces Flash disk / Memory stick
10 units Electronic tester VOM
5 units LAN Cable tester
MATERIALS
400 pcs. RJ 45
25 pcs. Modular box (RJ45)
20 pcs. Raceway or Slotted PVC 1.5” x 1.5” x 48”
1 box UTP cable
1 can Contact cleaner
1 piece Whiteboard
8 pcs Fiber optic cable 2 meters (terminated)
INSTALLERS / SOFTWARE
26 Desktop OS (license for proprietary software)
10 Network OS (license for proprietary software)
26 Office productivity software (license for
proprietary software)
26 Anti-virus (license for proprietary software)
5 Disk utility software
5 Virtualization software (license for proprietary
software)
5 Disk image software
RESOURCES / MANUALS
26 pieces Motherboard’s manual and installer
10 pieces Device driver installer
1 lot Assorted Computer book, PC Magazines and
journals
Specific Instruction for the Trainer
Qualification COMPUTER SYSTEMS SERVICING NC II
Unit of Competency Install and configure computer systems
PLEASE READ CAREFULLY:
1. The Trainer will :
a. Provide the necessary tools, equipment, supplies and materials you
are required to instruct the trainee to perform the Installation of
software.
b. Set up the demonstration area.
c. Provide the candidate copy of instruction for the candidate.
d. Ensure that the candidate FULLY understand the instruction before
proceeding the performance of the task.
e. Allow 20 minutes for the candidates to familiarized him/her/self with
the resources to be used in this demonstration.
f. Ensure that the candidate is wearing appropriate personal protective
equipment before allowing him/him to proceed with the task.
2. The assessment shall be based on the units of competency in the
training regulation and evidence plan and shall focus on the following
evidence gathering methods : demonstration/with oral questioning and
written test.
3. During the demonstration of skills, the assessor will check using the
demonstration checklist if the candidate was able to perform the task
specified in the demonstration checklist.
4. The trainer, based on the performance of the candidates should give
immediate feedback whether the candidate is competent or not yet
competent.
Prepared by:
MICHAEL U. MAMITAG
Trainer
