DB SERIES OUTLINE DIMENSIONS

Literature ID No. FT06-930

Revision 4

10/23/12
 TABLE OF CONTENTS

Drawing Page No.

DB3/4/5/5.5 Outline Dimensions.......................................................................... 3

DB6/6H/9 Outline Dimensions

Threaded................................................................................................... 4
Union......................................................................................................... 5
Flanged...................................................................................................... 6

DB8 Outline Dimensions

Threaded................................................................................................... 7
Union......................................................................................................... 8
Flanged...................................................................................................... 9

DB7/10 Outline Dimensions

Threaded................................................................................................... 10
Union......................................................................................................... 11
Flanged...................................................................................................... 12

DB11/15 Outline Dimensions

Threaded................................................................................................... 13
Union......................................................................................................... 14
Flanged...................................................................................................... 15

DB11/15 Outline Dimensions 80/90 FR B5

Threaded................................................................................................... 16
Union......................................................................................................... 17
Flanged...................................................................................................... 18

DB11/15 Outline Dimensions 100/112 FR B5

Threaded................................................................................................... 19
Union......................................................................................................... 20
Flanged...................................................................................................... 21

DB22 Outline Dimensions

Threaded................................................................................................... 22
Union......................................................................................................... 23
Flanged...................................................................................................... 24

2
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK
1 UPDATED MOTOR DIMS, ADDED DB5.5 9/14/10 DAC 3387
AND 71 FR.
2 CHG. DIM 'M' UNITS FROM CM TO MM 1/11/11 DAC 3460
'E'
'F'
1-1/4"
3.2cm
'G'

2"
5.1cm
'H'

3-1/4"
8.3cm

'B' 1" FNPT/FBSP

'A'

3
'C'

'D' 'I' 'J' 'M'

'L'

'K'
DB3/4/5/5.5 Outline Dimensions - Threaded Housing (R100531)

NOTE: DIMENSIONS ARE TO BE USED FOR REFERENCE ONLY

UNLESS OTHERWISE SPECIFIED DISTRIBUTION BLOCK
DIMENSIONS ARE IN INCHES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TOLERANCES ARE: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
FRAC. 1/32 STILL ASSM PURCH DB3/4/5/5.5
DEGREE 1°
FINISH 125 TITLE
WELD SHOP SALES X OUTLINE DIMENSIONAL
SIGNATURES DATE MACH SHOP ADV
SIZE: PART NUMBER REV.
DRAWN: C.M.B 11-29-07 THIRD ANGLE
PROJECTION
R100531
ENGR:
D 2
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE DNS 1 OF 1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

'B'*
'A'
7 3/16"
2 9/32" 2 15/32" (18.3 cm)
1" MNPT or MBSP
(5.8 cm) (6.3 cm)

4 15/16"
(12.5 cm)

1" FNPT
or FBSP

3 3/8" 'E'
(8.6 cm)

4
7 1/2" 'F' 'G'
19.1 cm

'H'

NOTES:
1. Dimensions and weights are to be used for reference only
2. Pump weight is estimated using polypropylene components
'C'
* Dimension depends upon motor manufacturer
DB6/6H/9 Outline Dimensions - Threaded Housing (R100503)

** Motor weight depends upon motor manufacturer and style of motor chosen 'D'

UNLESS OTHERWISE S PECIFIED DISTRIBUTION BLOCK

DIM ENSIO NS AR E IN INC HES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
DB6/6H/9 NEMA 56C 7-3/16" (18.3 CM) 17-7/16" (44.3 CM) 2-7/16" (6.2 CM) 4-7/8" (12.4 CM) 3-1/2" (8.9 CM) 9-15/16" (25.2 CM) 3" (7.6 CM) 11/32" (0.9 CM) 10.5 LBS (4.8 KG) 28 LBS (12.7 KG) TO LERA NC ES A RE: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
DB6/6H/9 NEMA 145TC 7-3/16" (18.3 CM) 17-15/16" (45.6 CM) 2-3/4" (7.0 CM) 5-1/2" (14.0 CM) 3-1/2" (8.9 CM) 9-13/16" (50.3 CM) 5" (12.7 CM) 11/32" (0.9 CM) 10.5 LBS (4.8 KG) 32 LBS (14.5 KG) FRAC. 1/32 STILL ASSM PURCH
DEGREE 1°
TITLE
DB6/6H/9
FINISH 125 WELD SHOP SALES
DB6/6H/9 IEC 63- B14 OR B5 FLANGE 7-5/8" (19.4 CM) 14-7/8" (37.8 CM) 1-31/32" (5.0 CM) 3-15/16" (10.0 CM) 2-15/32" (6.3 CM) 9-7/32" (23.4 CM) 3-5/32" (8.0 CM) 9/32" (0.7 CM) 14.0 LBS (6.4 KG) 17 LBS (7.7 KG) X
SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM-THREADED HSG
SIZE: PART NUMBER REV.
DB6/6H/9 IEC 71- B14 OR B5 FLANGE 7-5/8" (19.4 CM) 15-13/16" (40.2 CM) 2-7/32" (5.6 CM) 4-13/32" (11.2 CM) 2-25/32" (7.1 CM) 9-13/32" (23.9 CM) 3-17/32" (9.0 CM) 9/32" (0.7 CM) 14.0 LBS (6.4 KG) 22 LBS (10.0 KG) DRAWN: C.M.B 2-28-07 THIRD ANGLE
PROJECTION D R100503 0
ENGR:
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME DIM 'A' DIM 'B' * DIM 'C' DIM 'D' DIM 'E' DIM 'F' DIM 'G' DIM 'H' PUMP WT ** MOTOR WT *** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:1.2 1O F1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

'B'*
'A'
8 3/8"
2 9/32" 32 mm UNION 3 11/16" (21.3 cm)
(9.4 cm)

5 5/16"
(13.7 cm)
32mm Union

'E'
3 3/8"
(8.6 cm)

5
7-1/2"
(19.1 cm)
'F' 'G'

NOTES: 'H'
1. DIMENSIONS AND WEIGHTS ARE TO BE USED FOR REFERENCE ONLY.
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP COMPONENTS.
DB6/6H/9 Outline Dimensions - Union Housing (R100504)

* DIMENSION DEPENDS UPON MOTOR MANUFACTURER

**MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF 'C'
MOTOR CHOSEN. 'D'

UNLESS OTHERWISE SPECIFIED DISTRIBUTION BLOCK

3-1/2" (8.9 CM) 11-3/16" (28.4 CM) 3" (7.6 CM) 11/32" (0.9 CM) 10.5 LBS (4.8 KG) 28 LBS (12.7 KG) 9 21 GREENGARDEN ROAD PHONE: (814) 455-4478
DB6/6H/9 NEMA 56C 8-3/8" (21.3 CM) 18-11/16" (47.5 CM) 2-7/16" (6.2 CM) 4-7/8" (12.4 CM) DIM ENSIO NS ARE IN INCHES DEPT REC'D DEPT REC'D
TOLERA NCES ARE: ERI E, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
DB6/6H/9 NEMA 145TC 8-3/8" (21.3 CM) 19-3/16" (48.7 CM) 2-3/4" (7.0 CM) 5-1/2" (14.0 CM) 3-1/2" (8.9 CM) 11-1/8" (28.3 CM) 5" (12.7 CM) 11/32" (0.9 CM) 10.5 LBS (4.8 KG) 32 LBS (14.5 KG) FRAC. 1/32 STILL ASSM PURCH DB6/6H/9
DEGREE 1°
FINISH 125 WELD SHOP TITLE
DB6/6H/9 IEC 63- B14 OR B5 FLANGE 8-27/32" (22.5 CM) 16-1/8" (41.0 CM) 1-31/32" (5.0 CM) 3-15/16" (10.0 CM) 2-15/32" (6.3 CM) 10-15/32" (26.6 CM) 3-5/32" (8.0 CM) 9/32" (0.7 CM) 14.0 LBS (6.4 KG) 17 LBS (7.7 KG) SALES X
SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM- UNION HSG
SIZE: PART NUMBER REV.
DB6/6H/9 IEC 71- B14 OR B5 FLANGE 8-27/32" (22.5 CM) 17-1/16" (43.3 CM) 2-7/32" (5.6 CM) 4-13/32" (11.2 CM) 2-25/32" (7.1 CM) 10-21/32" (27.1 CM) 3-17/32" (9.0 CM) 9/32" (0.7 CM) 14.0 LBS (6.4 KG) 22 LBS (10.0 KG) DRAWN: C.M.B 3-1-07 THIRD ANGLE
PROJECTION D R100504 0
ENGR:
CAD GENERATED DRAWING, SCALE
: SHEET CHECKED
PUMP MODEL MOTOR FRAME DIM 'A' DIM 'B' * DIM 'C' DIM 'D' DIM 'E' DIM 'F' DIM 'G' DIM 'H' PUMP WT MOTOR WT ** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:1.3 1 OF 1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

'B'*
2 9/32 'A'
(5.79 cm) 8 9/16"
(21.7 cm)
3 7/8"
(9.8 cm)

5 1/8"
(13.0 cm)

3 3/8"
(8.6 cm)

'E'

7-1/2"

6
(19.1 cm)

'F' 'G'
Suction & Discharge Flange Detail
'H'
3 11/32" 4 1/4"

5/8"
DB6/6H/9 Outline Dimensions - Flanged Housing (R100505)

'C '

'D'

3 1/8"
3/4"
1" ANSI 150#
PN20
NOTES: PN40
1. DIMENSIONS AND WEIGHTS ARE TO BE USED FOR REFERENCE ONLY.
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP COMPONENTS.

* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.

** MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF MOTOR CHOSEN.
UNLESS OTHERWISE S PECIFIED DISTRIBUTION BLOCK

DB6/6H/9 NEMA 56C 8-9/16" (21.7 CM) 18-27/32" (47.8 CM) 2-7/16" (6.2 CM) 4-7/8" (12.4 CM) 3-1/2" (8.9 CM) 11-11/32" (28.7 CM) 3" (7.6 CM) 11/32" (0.9 CM) 10.5 LBS (4.8 KG) 28 LBS (12.7 KG) DIM ENSIO NS A RE IN IN C HES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TO LERA NC ES A RE: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
DB6/6H/9 NEMA 145TC 8-9/16" (21.7 CM) 19-11/32" (49.1 CM) 2-3/4" (7.0 CM) 5-1/2" (14.0 CM) 3-1/2" (8.9 CM) 11-7/32" (28.5 CM) 5" (12.7 CM) 11/32" (0.9 CM) 10.5 LBS (4.8 KG) 32 LBS (14.5 KG) FRAC. 1/32 STILL ASSM PURCH DB6/6H/9
DEGREE 1°
FINISH 125 WELD SHOP TITLE
SALES X
DB6/6H/9 IEC 63- B14 OR B5 FLANGE 9-21/32" (22.9 CM) 16-9/32" (31.3 CM) 1-31/32" (5.0 CM) 3-15/16" (10.0 CM) 2-15/32" (6.3 CM) 10-5/8" (26.9 CM) 3-5/32" (8.0 CM) 9/32" (0.7 CM) 14.0 LBS (6.4 KG) 17 LBS (7.7 KG) SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM- FLANGED HSG
SIZE: PART NUMBER REV.
DB6/6H/9 IEC 71- B14 OR B5 FLANGE 9-21/32" (22.9 CM) 17-7/32" (43.7 CM) 2-7/32" (5.6 CM) 4-13/32" (11.2 CM) 2-25/32" (7.1 CM) 10-13/16" (27.4 CM) 3-17/32" (9.0 CM) 9/32" (0.7 CM) 14.0 LBS (6.4 KG) 22 LBS (10.0 KG) DRAWN: C.M.B 3-1-07 THIRD ANGLE
ENGR:
PROJECTION D R100505 0
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME DIM 'A' DIM 'B' * DIM 'C' DIM 'D' DIM 'E' DIM 'F' DIM 'G' DIM 'H' PUMP WT MOTOR WT ** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:1.3 1O F1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

'B' *
'A'
7 1/32"
2 1/2" 2 11/32" (17.9 cm)
1" MNPT OR MBSP
(6.4 cm) (6.0 cm)

4 15/16"
(12.5)cm
1 1/2" FNPT
or FBSP

'E'
'I'

7
'F' 'G'

7 1/2"
(19.1 cm) 'H'

NOTES:
1. DIMENSIONS AND WEIGHTS ARE TO BE USED FOR REFERENCE ONLY.
DB8 Outline Dimensions - Threaded Housing (R100506)

2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP

COMPONENTS. 'C'

* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.

'D'
**MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF
MOTOR CHOSEN.

UNLESS OTHERWISE S PECIFIED DISTRIBUTION BLOCK

DB8 NEMA 56C 7-1/32"(17.9 CM) 17-9/32" (43.9 CM) 2-7/16" (6.2 CM) 4-7/8" (12.4 CM) 3-1/2" (8.9 CM) 9-25/32" (24.8 CM) 3" (7.6 C M) 11/32" (0.9 CM) 3-3/8" (8.6 CM) 10.5 LBS (4.8 KG) 28 LBS (12.7 KG) DIM ENSIO NS A RE IN IN C HES 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TO LERA NC ES A RE:
DEPT REC'D DEPT REC'D
ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
DB8 NEMA 145TC 7-1/32" (17.9 CM) 17-25/32" (45.2 CM) 2-3/4" (7.0 CM) 5-1/2" (14.0 CM) 3-1/2" (8.9 CM) 9-21/32" (24.5 CM) 5" (12.7 C M) 11/32" (0.9 CM) 3-3/8" (8.6 CM) 10.5 LBS (4.8 KG) 32 LBS (14.5 KG) .XXX .005 PUMP ASSM INJ MOLD PRODUCT:
.XX .010
DB8 IEC 63- B14 OR B5 FLANGE 7-15/32" (19.0 CM)14-23/32" (37.4 CM) 1-31/32" (5.0 CM) 3-15/16" (10.0 CM) 2-15/32" (6.3 CM) 9-1/16" (23.0 CM) 3-5/32" (8.0 CM) 9/32" (0.7 CM) 3-3/8" (8.6 CM) 14.0 LBS (6.4 KG) 17 LBS (7.7 KG) FRAC. 1/32 STILL ASSM PURCH DB8
DEGREE 1°
FINISH 125 WELD SHOP TITLE
DB8 IEC 71- B14 OR B5 FLANGE 7-15/32"(19.0 CM) 15-21/32" (39.8 CM) 2-7/32" (5.6 CM) 4-13/32" (11.2 CM) 2-25/32" (7.1 CM) 9-1/4" (23.5 CM) 3-17/32" (9.0 CM) 9/32" (0.7 CM) 3-3/8" (8.6 CM) 14.0 LBS (6.4 KG) 22 LBS (10.0 KG) SALES X
SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM- THREADED HSG
DB8 IEC 80- B14 7-21/32"(19.4 CM) 17-5/32" (43.6 CM) 2-15/32" (6.3 CM) 4-29/32" (12.5 CM) 3-5/32" (8.0 CM) 9-9/16" (24.3 CM) 3-15/16"(10.0 CM) 13/32" (1.0 CM) 3-3/8" (8.6 CM) 11.0 LBS (5.0 KG) 31 LBS (14.1 KG) SIZE: PART NUMBER REV.
DRAWN: C.M.B 3-7-07 THIRD ANGLE
DB8 IEC 80- B5 7-21/32"(19.4 CM) 17-5/32" (43.6 CM) 2-15/32" (6.3 CM) 4-29/32" (12.5 CM) 3-5/32" (8.0 CM) 9-9/16" (24.3 CM) 3-15/16"(10.0 CM) 13/32" (1.0 CM) 3-15/16" (10.0CM) 16.5 LBS (7.5 KG) 31 LBS (14.1 KG) PROJECTION D R100506 0
ENGR:
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME DIM 'A' DIM 'B' * DIM 'C' DIM 'D' DIM 'E' DIM 'F' DIM 'G' DIA 'H' DIM 'I' PUMP WT MOTOR WT ** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:1.2 1O F1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

'B'
'A'
8 13/16"
2 1/2" (22.4 cm)
(6.4 cm) 32mm UNION 4 5/32"
(10.6 cm)

5 13/32"
(13.7cm )

50mm UNION

'E'
'I'

8
7 1/2"
(19.1 cm ) 'F' 'G'

'H'
DB8 Outline Dimensions - Union Housing (R100507)

NOTES:
1. DIMENSIONS AND WEIGHTS ARE TO BE USED FOR
REFERENCE ONLY
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP 'C'
COMPONENTS.
'D'
* DIMENSION DEPENDS UPON MOTOR MANUFACTURER
** MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND
STYLE OF MOTOR CHOSEN.

DB8 NEMA 56C 8-13/16" (22.4 CM) 19-3/32" (48.5 CM) 2-7/16" (6.2 CM) 4-7/8" (12.4 CM) 3-1/2" (8.9 CM) 11-19/32" (29.4 CM) 3" (7.6 CM) 11/32" (0.9 CM) 3-3/8" (8.6 CM) 10.5 LBS (4.8 KG) 28 LBS (12.7 KG)
DB8 NEMA 145TC 8-13/16" (22.4 CM) 19-19/32" (49.8 CM) 2-3/4" (7.0 CM) 5-1/2" (14.0 CM) 3-1/2" (8.9 CM) 11-15/32" (29.1 CM) 5" (12.7 CM) 11/32" (0.9 CM) 3-3/8" (8.6 CM) 10.5 LBS (4.8 KG) 32 LBS (14.5 KG) UNLESS OTHERWISE S PECIFIED DISTRIBUTION BLOCK
DIM ENSIO NS A RE IN IN C HES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
DB8 IEC 63- B14 OR B5 FLANGE 9-9/32" (23.6 CM) 16-17/32" (42.0 CM) 1-31/32" (5.0 CM) 3-15/16" (10.0 CM) 2-15/32" (6.3 CM) 10-7/8" (27.6 CM) 3-5/32" (8.0 CM) 9/32" (0.7 CM) 3-3/8" (8.6 CM) 14.0 LBS (6.4 KG) 17 LBS (7.7 KG) TO LERA NC ES A RE: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
DB8 IEC 71- B14 OR B5 FLANGE 9-9/32" (23.6 CM) 17-15/32" (44.4 CM) 2-7/32" (5.6 CM) 4-13/32" (11.2 CM) 2-25/32" (7.1 CM) 11-1/16" (28.1 CM) 3-17/32" (9.0 CM) 9/32" (0.7 CM) 3-3/8" (8.6 CM) 14.0 LBS (6.4 KG) 22 LBS (10.0 KG) FRAC. 1/32 STILL ASSM PURCH DB 8
DEGREE 1°
FINISH 125 WELD SHOP TITLE
SALES X
DB8 IEC 80- B14 9-15/32" (24.1 CM) 18-31/32" (48.2 CM) 2-15/32" (6.3 CM) 4-29/32" (12.5 CM) 3-5/32" (8.0 CM) 11-3/8" (28.9 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-3/8" (8.6 CM) 11.0 LBS (5.0 KG) 31 LBS (14.1 KG) SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM- UNION HSG
SIZE: PART NUMBER REV.
DB8 IEC 80- B5 9-15/32" (24.1 CM) 18-31/32" (48.2 CM) 2-15/32" (6.3 CM) 4-29/32" (12.5 CM) 3-5/32" 8.0 CM) 11-3/8" (28.9 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-15/16" (10.0 CM) 16.5 LBS (7.5 KG) 31 LBS (14.1 KG) DRAWN: C.M.B 3-7-07 THIRD ANGLE
ENGR:
PROJECTION D R100507 0
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME DIM 'A' DIM 'B' * DIM 'C' DIM 'D' DIM 'E' DIM 'F' DIM 'G' DIA 'H' DIM 'I' PUMP WT MOTOR WT ** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:1.3 1O F1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

DISCHARGE FLANGE 'B' *

2 1/2" 1" ANSI 150#
(6.4 cm) (1" ISO PN 20) 'A'
(1" ISO PN 40) 8 13/32"
(21.4 cm)
3 3/4"
(9.5 cm)
SUCTION FLANGE
1-1/2" ISO 150# 5 1/8"
(1-1/2" ISO PN 20) (13.0 cm)
(1-1/2" ISO PN 40)

'I'

'E'
7 1/2"
(19.1 cm)

9
SUCTION FLANGE DETAIL
Discharge Flange Detail 'F'
4 11/32" 5 1/8" 'G'
3 11/32" 4 1/4"

5/ 8" 5/8" 'H'

DB8 Outline Dimensions - Flange Housing (R100508)

'C '
3 1/8"
3/4"
1" ANSI 150# 'D'
4 11/32" 7/8"
ISO PN 20
1 1/2" ANSI 150# ISO PN 40

NOTES:
1. DIMENSIONS AND WEIGHTS ARE FOR REFERENCE ONLY.
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE COMPONENTS.
* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.
**MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF MOTOR CHOSEN.

DB8 NEMA 56C 8 13/32" (21.4 CM) 18 11/16" (47.5 CM) 2 7/16" (6.2 CM) 4 7/8" (12.4 CM) 3 1/2" (8.9 CM) 11 3/16" (28.4 CM) 3" (7.6 CM) 11/32" (0.9 CM) 3 3/8" (8.6 CM) 10.5 LBS (4.8 KG) 28 LBS (12.7 KG) UNLESS OTHERWISE S PECIFIED DISTRIBUTION BLOCK
DIM ENSIO NS AR E IN INC HES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
DB8 NEMA 145TC 8 13/32" (21.4 CM) 19 3/16" (48.7 CM) 2 3/4" (7.0 CM) 5 1/2" (14.0 CM) 3 1/2" (8.9 CM) 11 1/16" (29.1 CM) 5" (12.7 CM) 11/32" (0.9 CM) 3 3/8" (8.6 CM) 10.5 LBS (4.8 KG) 32 LBS (7.7 KG) TO LERA NC ES A RE: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
DB8 IEC 63 B14/B5 FLANGE 8 7/8" (22.5 CM) 16 1/8" (41.0 CM) 1 31/32" (5.0 CM) 3 15/16" (10.0 CM) 2 15/32" (6.3 CM) 10 15/32" (26.6 CM) 3-5/32" (8.0 CM) 9/32" (0.7 CM) 3 3/8" (8.6 CM) 14.0 LBS (6.4 KG) 17 LBS (7.7 KG) FRAC. 1/32 STILL ASSM PURCH DB 8
DEGREE 1°
FINISH 125 WELD SHOP TITLE
DB8 IEC 71 B14/B5 FLANGE 8 7/8" (22.5 CM) 17 1/16" (43.3 CM) 2 7/32" (5.6 CM) 4 13/32" (11.2 CM) 2 25/32" (7.1 CM) 10 21/32" (27.1 CM) 3-17/32" (9.0 CM) 9/32" (0.7 CM) 3 3/8" (8.6 CM) 14.0 LBS (6.4 KG) 22 LBS (10.0 KG) SALES X
SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM- FLANGED HSG
9 1/16" (23.0 CM) 18 9/16" (47.1 CM) 2 15/32" (6.3 CM) 4 29/32" (12.5 CM) 3 5/32" (8.0 CM) 10 31/32" (27.9 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3 3/8" (8.6 CM) SIZE: PART NUMBER REV.
DB8 IEC 80 B14 11.0 LBS (5.0 KG) 31 LBS (14.1 KG) DRAWN: C.M.B 3-8-07 THIRD ANGLE
DB8 18 9/16" (47.1 CM) 2 15/32" (6.3 CM) ENGR:
PROJECTION D R100508 0
IEC 80 B5 9 1/16" (23.0 CM) 4 29/32" (12.5 CM) 3 5/32" (8.0 CM) 10 31/32" (27.9 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3 15/16" (10.0 CM) 16.5 LBS (7.5 KG) 31 LBS (14.1 KG) CAD GENERATED DRAWING, SCALE: SHEET CHECKED
DIM 'F' DIM 'G' DIA 'H' DIM 'I' PUMP WT DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:1.3 1O F1
PUMP MODEL MOTOR FRAME DIM 'A' DIM 'B'* DIM 'C' DIM 'D' DIM 'E' MOTOR WT**
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

2 19/32" 1 1/2" MNPT OR 'B'*

(6.6 cm) MBSP 'A'
7 3/32"
2 9/32" (18.0 cm)
(5.8 cm)

4 15/16"
(12.5 cm)

1 1/2" FNPT
OR FBSP

'I'
'E'

7 1/2"
(19.1 CM)

10
'F' 'G'
'H'

NOTES:
1. DIMENSIONS AND WEIGHTS ARE FOR REFERENCE ONLY.
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE COMPONENTS.
'C'
* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.
**MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE
DB7/10 Outline Dimensions - Threaded Housing (R100509)

OF MOTOR CHOSEN.
'D'

DB7/10 NEMA 56C 7-3/32" (18.0 CM) 17-11/32" (44.1 CM) 2-7/16" (6.2 CM) 4-7/8" (12.4 CM) 3-1/2" (8.9 CM) 9-27/32" (25.0 CM) 3" (7.6 CM) 11/32" (0.9 CM) 3-3/8" (8.6 CM) 10.5 LBS (4.8 KG) 28 LBS (12.7 KG)
DB7/10 NEMA 145TC 7-3/32" (18.0 CM) 17-27/32" (45.3 CM) 2-3/4" ( 0 CM) 5-1/2" (14.0 CM) 3-1/2" (8.9 CM) 9-23/32" (24.7 CM) 5" (12.7 CM) 11/32" (0.9 CM) 3-3/8" (8.6 CM) 10.5 LBS (4.8 KG) 32 LBS (14.5 KG)
DB7/10 IEC 63- B14 OR B5 FLANGE 7-17/32" (19.1 CM) 14-25/32" (37.5 CM) 1-31/32" .0 CM) 3-15/16" (10.0 CM) 2-15/32" (6.3 CM) 9-1/8" (23.2 CM) 3-5/32" (8.0 CM) 9/32" (0.7 CM) 3-3/8" (8.6 CM) 14.0 LBS (6.4 KG) 17 LBS (7.7 KG)
DB7/10 IEC 71- B14 OR B5 FLANGE 7-17/32" (19.1 CM) 15-23/32" (39.9 CM) 2-7/32" (5.6 CM) 4-13/32" (11.2 CM) 2-25/32" (7.1 CM) 9-5/16" (23.7 CM) 3-17/32" (9.0 CM) 9/32" (0.7 CM) 3-3/8" (8.6 CM) 14.0 LBS (6.4 KG) 22 LBS (10.0 KG) UNLESS OTHERWISE S PECIFIED DISTRIBUTION BLOCK
7. DIM ENSIO NS A RE IN IN C HES 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TO LERA NC ES A RE:
DEPT REC'D DEPT REC'D
DB7/10 IEC 80- B14 7-23/32" (19.6 CM) 17-7/32" (43.7 CM) 2-15/32"
(5 (6.3 CM) 4-29/32" 12.5 CM) 3-5/32" (8.0 CM) 9-5/8" (24.4 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-3/8" (8.6 CM) 11.0 LBS (5.0 KG) 31 LBS (14.1 KG) ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
DB7/10 IEC 80- B5 7-23/32" (19.6 CM) 17-7/32" (43.7 CM) 2-15/32" (6.3 CM) 4-29/32" (12.5 CM) 3-5/32" 8.0 CM) 9-5/8" (24.4 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-15/16" (10.0 CM) 16.5 LBS (7.5 KG) 31 LBS (14.1 KG) FRAC. 1/32 STILL ASSM PURCH DB 7/10
DEGREE 1°
( FINISH 125 WELD SHOP TITLE
SALES X
DB7/10 IEC 90- B14 7-23/32" (19.6 CM) 17-7/32" (43.7 CM) 2-3/4" (7.0 CM) 5-1/2" (14.0 CM) 3-17/32" (9.0 CM) 9-7/8" (25.1 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-3/8" (8.6 CM) 11.0 LBS (5.0 KG) 37.5 LBS (17.0 KG) SIGNATURES DATE MACH SHOP ADV
OUTLINE DI M- THREADED HSG
SIZE: PART NUMBER REV.
DRAWN: C.M.B 3-16-07 THIRD ANGLE
DB7/10 IEC 90- B5 7-23/32" (19.6 CM) 17-7/32" (43.7 CM) 2-3/4" (7.0 CM) 5-1/2" (14.0 CM) 3-17/32" (9.0 CM) 9-7/8" (25.1 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-15/16" (10.0 CM) 16.5 LBS (7.5 KG) 37.5 LBS (17.0 KG) PROJECTION D R100509 0
ENGR:
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME DIM 'A' DIM 'B' * DIM 'C' DIM 'D' DIM 'E' DIM 'F' DIM 'G' DIA 'H' DIM 'I' PUMP WT MOTOR WT ** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:1.2 1O F1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

'B'*
'A'
8 11/16"
(22.1 cm)
2 19/32" 3 7/8"
(6.6 cm) (9.8 cm) 50 mm UNION

5 9/16"
(14.1 cm)
50mm UNION

'E'

'I'

11
'F' 'G'
7 1/2"
(19.1 cm) 'H'
DB7/10 Outline Dimensions - Union Housing (R100510)

NOTES:
1. DIMENSIONS AND WEIGHTS ARE FOR REFERENCE ONLY. 'C'
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE COMPONENTS.
'D'
* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.
**MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE
OF MOTOR CHOSEN.

DB7/10 NEMA 56C 8-11/16" (22.1 CM) 18-15/16" (48.1 CM) 2-7/16" (6.2 CM) 4-7/8" (12.4 CM) 3-1/2" (8.9 CM) 11-7/16" (29.1 CM) 3" (7.6 CM) 11/32" (0.9 CM) 3-3/8" (8.6 CM) 10.5 LBS (4.8 KG) 28 LBS (12.7 KG)
DB7/10 NEMA 145TC 8-11/16" (22.1 CM) 19-7/16" (49.4 CM) 2-3/4" (7.0 CM) 5-1/2" (14.0 CM) 3-1/2" (8.9 CM) 11-5/16" (28.7 CM) 5" (12.7 CM) 11/32" (0.9 CM) 3-3/8" (8.6 CM) 10.5 LBS (4.8 KG) 32 LBS (14.5 KG)
DB7/10 IEC 63- B14 OR B5 FLANGE 9-1/8" (23.2 CM) 16-3/8" (41.6 CM) 1-31/32" (5.0 CM) 3-15/16" (10.0 CM) 2-15/32" (6.3 CM) 10-23/32" (27.2 CM) 3-5/32" (8.0 CM) 9/32" (0.7 CM) 3-3/8" (8.6 CM) 14.0 LBS (6.4 KG) 17 LBS (7.7 KG)
DB7/10 IEC 71- B14 OR B5 FLANGE 9-1/8" (23.2 CM) 17-5/32" (44.0 CM) 2-7/32" (5.6 CM) 4-13/32" (11.2 CM) 2-25/32" (7.1 CM) 10-29/32" (27.7 CM) 3-17/32" (9.0 CM) 9/32" (0.7 CM) 3-3/8" (8.6 CM) 14.0 LBS (6.4 KG) 22 LBS (10.0 KG) UNLESS OTHERWISE S PECIFIED DISTRIBUTION BLOCK
DIM ENSIO NS A RE IN IN C HES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
DB7/10 IEC 80- B14 9-5/16" (23.7 CM) 18-13/16" (47.8 CM) 2-15/32" (6.3 CM) 4-29/32" (12.5 CM) 3-5/32" (8.0 CM) 11-7/32" (28.5 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-3/8" (8.6 CM) 11.0 LBS (5.0 KG) 31 LBS (14.1 KG) TO LERA NC ES A RE: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
DB7/10 IEC 80- B5 9-5/16" (23.7 CM) 18-13/16" (47.8 CM) 2-15/32" (6.3 CM) 4-29/32" (12.5 CM) 3-5/32" 8.0 CM) 11-7/32" (28.5 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-15/16" (10.0 CM) 16.5 LBS (7.5 KG) 31 LBS (14.1 KG) FRAC. 1/32 STILL ASSM PURCH DB 7/10
DEGREE 1°
FINISH 125 WELD SHOP TITLE
SALES X
DB7/10 IEC 90- B14 9-5/16" (23.7 CM) 18-13/16" (47.8 CM) 2-3/4" (7.0 CM) 5-1/2" (14.0 CM) 3-17/32" (9.0 CM) 11-15/32" (29.1 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-3/8" (8.6 CM) 11.0 LBS (5.0 KG) 37.5 LBS (17.0 KG) SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM- UNION HSG
SIZE: PART NUMBER REV.
DB7/10 IEC 90- B5 9-5/16" (23.7 CM) 18-13/16" (47.8 CM) 2-3/4" (7.0 CM) 5-1/2" (14.0 CM) 3-17/32" (9.0 CM) 11-15/32" (29.1 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-15/16" (10.0 CM) 16.5 LBS (7.5 KG) 37.5 LBS (17.0 KG) DRAWN: C.M.B 3-7-07 THIRD ANGLE
ENGR:
PROJECTION D R100510 0
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME DIM 'A' DIM 'B' * DIM 'C' DIM 'D' DIM 'E' DIM 'F' DIM 'G' DIA 'H' DIM 'I' PUMP WT MOTOR WT ** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:1.3 1O F1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

2 19/32" DISCHARGE FLANGE 'B' *

(6.6 cm) 1 1/2" ISO 150# 'A'
(1 1/2" ISO PN20) 8 1/2"
(1 1/2" ISO PN40) 3 11/16" (21.6 cm)
(9.4 cm)

5 3/32" SUCTION FLANGE

(12.9 cm)
1 1/2" ISO 150#
(1 1/2" ISO PN20)
(1 1/2" ISO PN40)

'I'
'E'

7 1/2"
(19.1 cm)
SUCTION & DISCHARGE FLANGE DETAIL
1 1/2" ISO 150#
(1 1/2" ISO PN20) 'F' 'G'

12
4 11/32" (1 1/2" ISO PN40)

3 7/8"
'H'
5/8"
DB7/10 Outline Dimensions - Flange Housing (R100512)

'C'
7/32"
'D'

NOTES:
1. DIMENSIONS AND WEIGHTS ARE FOR REFERENCE ONLY.
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE COMPONENTS.

* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.

**MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE
OF MOTOR CHOSEN.

DB7/10 NEMA 56C 8-1/2" (21.6 CM) 18-3/4" (47.6 CM) 2-7/16" (6.2 CM) 4-7/8" (1 2.4 CM) 3-1/2" (8.9 CM) 11-1/4" (28.6 CM) 3" (7.6 CM) 11/32" (0.9 CM) 3-3/8" (8.6 CM) 10.5 LBS (4.8 KG) 28 LBS (12.7 KG)
DB7/10 NEMA 145TC 8-1/2" (21.6 CM) 19-1/4" (48.9 CM) 2-3/4" (7.0 CM) 5-1/2" (14 .0 CM) 3-1/2" (8.9 CM) 11-1/8" (28.3 CM) 5" (12.7 CM) 11/32" (0.9 CM) 3-3/8" (8.6 CM) 10.5 LBS (4.8 KG) 32 LBS (14.5 KG)
DB7/10 IEC 63- B14 OR B5 FLANGE 8-15/16" (22.7 CM) 16-3/16" (41.1 CM) 1-31/32" (5.0 CM) 3-15/16" (10.0 CM) 2-15 /32" (6.3 CM) 10-17/32" (26.7 CM) 3-5/32" (8.0 CM) 9/32" (0.7 CM) 3-3/8" (8.6 CM) 14.0 LBS (6.4 KG) 17 LBS (7.7 KG) UNLESS OTHERWISE S PECIFIED DISTRIBUTION BLOCK

DB7/10 IEC 71- B14 OR B5 FLANGE 8-15/16" (22.7 CM) 17-1/8" (43.5 CM) 2-7/32" (5.6 CM) 4-13/32" (11.2 CM) 2-25/32" (7.1 CM) 10-23/32" (27.2 CM) 3-17/32" (9.0 CM) 9/32" (0.7 CM) 3-3/8" (8.6 CM) 14.0 LBS (6.4 KG) 22 LBS (10.0 KG) DIM ENSIO NS A RE IN IN C HES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TO LERA NC ES A RE: ERIE
, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUM
P ASSM INJ MOLD
DB7/10 IEC 80- B14 9-1/8" (23.2 CM) 18-5/8" (47.3 CM) 2-15/32" (6.3 CM) 4-29/32" (12.5 CM) 3-5/32" (8.0 CM) 11-1/32" (28.0 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-3/8" (8.6 CM) 11.0 LBS (5.0 KG) 31 LBS (14.1 KG) .XX .010 PRODUCT:
FRAC. 1/32 STILL ASSM PURCH DB 7/10
DEGREE 1°
DB7/10 IEC 80- B5 9-1/8" (23.2 CM) 18-5/8" (47.3 CM) 2-15/32" (6.3 CM) 4-29/32" (12.5 CM) 3-5/32" 8.0 CM) 11-1/32" (28.0 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-15/16" (10.0 CM) 16.5 LBS (7.5 KG) 31 LBS (14.1 KG) FINISH 125 WELD SHOP TITLE
SALES X
DB7/10 IEC 90- B14 9-1/8" (23.2 CM) 18-5/8" (47.3 CM) 2-3/4" (7.0 CM) 5-1/2" (1 4.0 CM) 3-17/32" (9.0 CM) 11-9/32" (28.7 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-3/8" (8.6 CM) 11.0 LBS (5.0 KG) 37.5 LBS (17.0 KG) SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM- FLANGED HSG
SIZE: PART NUMBER REV.
DRAWN
: C.M.B 3-30-07 THIRD ANGLE
DB7/10 IEC 90- B5 9-1/8" (23.2 CM) 18-5/8" (47.3 CM) 2-3/4" (7.0 CM) 5-1/2" (14.0 CM) 3-17/32" (9.0 CM) 11-9/32" (28.7 CM) 3-15/16" (10.0 CM) 13/32" (1.0 CM) 3-15/16" (10.0 CM) 16.5 LBS (7.5 KG) 37.5 LBS (17.0 KG) ENGR:
PROJECTION D R100512 0
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME DIM 'A' DIM 'B' * DIM 'C' DIM ' D' DIM 'E' DIM 'F' DIM 'G' DIA 'H' DIM 'I' PUMP WT MOTOR WT ** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:1.2 1O F1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

4 7/8"
(124mm) 'B' *
3 5/16" 'A'
(84mm)
8 17/32"
3" (217mm)
(76.2 mm) 1.5" MNPT
OR MBSP
5 3/4"
(146mm)

5"
(127 mm) 2" FNPT or
FBSP

4 11/32"
(110mm)
8 21/32" 13 17/32"

13
220mm
(344mm)
9 23/32"
(247mm) 11 3/8" 1 3/
3 2"
(289mm) (28mm)
5 3/8"
NOTES: (137mm)
1. ALL WEIGHTS ARE ESTIMATED AND FOR REFERENCE ONLY. 1/2"
(13mm) 1/2"
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP COMPONENTS. (13mm)
3/8"
* DIMENSION DEPENDS UPON MOTOR MANUFACTURER. (9.5mm)
** MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF
MOTOR USED.
'C'
DB11/15 OUTLINE DIMENSIONS - THREADED HOUSING (R100422)

'D'

DB11/15 NEMA 56C FR. 8 17/32" (217mm) 20 17/32" (521mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 27 lbs (12.2 kg) 31 lbs (14 kg)
DB11/15 NEMA 145 FR. 8 17/32" (217mm) 18 29/32" (480mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 27 lbs (12.2 kg) 45 lbs (20 kg)
DB11/15 NEMA 184FR. 9 13/32" (239 mm) 22 6/32" (564mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 27 lbs (12.2 kg) 84 lbs (38 kg)
DB11/15 IEC 80 FR. 9 5/32" (233mm) 19 11/16" (500mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 27 lbs (12.2 kg) 35 lbs (16 kg) UNLESS OTHERWISE S PECIFIED DISTRIBUTION BLOCK
DIM ENSIO NS AR E IN INC HES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TOLERA NC ES AR E: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
DB11/15 IEC 90 FR. 9 5/32" (233mm) 19 7/8" (505mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 27 lbs (12.2 kg) 50 lbs (23 kg) .XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
FRAC. 1/32 STILL ASSM PURCH DB11/15
DEGREE 1°
DB11/15 IEC 100 FR. 9 7/32" (234mm) 21 3/8" (543mm) 3-5/32" (80 mm) 6-10/32" (160 mm) 27 lbs (12.2 kg) 70 lbs (32 kg) FINISH 125 WELD SHOP TITLE
SALES
SIGNATURES DATE MACH SHOP ADV
SIZE:
OUTLINE DIMENSIONAL
PART NUMBER REV.
DB11/15 IEC 112 FR. 9 7/32" (234mm) 21 7/8" (556mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 27 lbs (12.2 kg) 88 lbs (40 kg) DRAWN: C.M.B 1-6-05 THIRD ANGLE
R100422
PROJECTION D 0
ENGR:
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME DIM 'A' DIM 'B' * DIM 'C' DIM 'D' PUMP WT. MOTOR WT.** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:1.75 1O F1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

4 7/8" 'B'
(124mm) 'A'
3 5/16" 10 1/4"
(84mm)
4 3/4" (260mm)
(121mm) 50mm
UNION

6 3/8"
(157mm)

63mm
5" UNION
(127 mm)

4 11/32"
(110mm)

14
15 1/4"
8 21/32" (387mm)
(220mm) 13 3/32" 13/32"
9 23/32" (368mm) (28mm)
(247mm) 7 3/32"
1/2"
(180mm) 1/2"
(13mm)
(13mm)
3/8"
NOTES:
(9.5mm)
1. ALL WEIGHTS ARE ESTIMATED AND FOR REFERENCE ONLY.
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP
'C'
DB11/15 OUTLINE DIMENSIONS - UNION HOUSING (R100424)

COMPONENTS.

* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.

'D'
** MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND
STYLE OF MOTOR USED.

DB11/15 NEMA 56C FR. 10 1/4" (260mm) 22 1/4" (565mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 28 lbs (12.7 kg) 31 lbs (14 kg)
DB11/15 NEMA 145 FR. 10 1/4" (260mm) 20 5/8" (524mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 28 lbs (12.7 kg) 45 lbs (20 kg)
DB11/15 NEMA 184FR. 11 1/8" (282mm 23 29/32" (607mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 28 lbs (12.7 kg) 84 lbs (38 kg)
UNLESS OTHERWISE S PECIFIED DISTRIBUTION BLOCK
DB11/15 IEC 80 FR. 11 1/8" (282mm) 21 13/32" (544mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 28 lbs (12.7 kg) 35 lbs (16 kg) DIM ENSIO NS A RE IN IN C HES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TOLERA NC ES AR E: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
) .XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
DB11/15 IEC 90 FR. 10 7/8" (276mm) 21 19/32" (548mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 28 lbs (12.7 kg) 50 lbs (23 kg) FRAC. 1/32 STILL ASSM PURCH DB11/15
DEGREE 1°
FINISH 125 WELD SHOP TITLE
SALES X
DB11/15 IEC 100 FR. 10 15/16" (278mm) 23 3/32" (586mm) 3-5/32" (80 mm) 6-10/32" (160 mm) 28 lbs (12.7 kg) 70 lbs (32 kg) SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM- UNION STYLE HSG
SIZE: PART NUMBER REV.
DB11/15 IEC 112 FR. 10 15/16" (278mm) 23 19/32" (599mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 28 lbs (12.7 kg) 88 lbs (40 kg) DRAWN: C.M.B 1-6-05 THIRD ANGLE
ENGR:
PROJECTION D R100424 0
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME DIM 'A' DIM 'B' * DIM 'C' DIM 'D' PUMP WT. MOTOR WT.** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:1.75 1 OF 1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

5 7/8"
(149mm) 'B' *
'A'
3 5/16"
(84mm) 9 29/32"
(252mm)
DISCHARGE FLANGE 4 3/8"
1.5" ANSI 150# (111mm)
SUC TIO N F LANG E
2" ANS I 150#
(2" I SO P N20) (1.5" ISO PN20)
(2" I SO P N40)
(1.5" ISO PN40)
5 29/32"
(152mm)

5"
(127mm)

4 11/32"
(110mm)
14 29/32"

15
8 21/32"
(220mm) (379mm)
9 23/32" 12 23/32" 13/32"
(227mm) (323mm) (28mm)
6 23/32"
(171mm) 1/2"
(13mm) 1/2"
NOTES:
1. ALL WEIGHTS ARE ESTIMATED AND FOR REFERENCE ONLY. 3/8" (13mm)
(9.5mm)
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP COMPONENTS.

* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.

** MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF 'C'
MOTOR USED.
DB11/15 OUTLINE DIMENSIONS - FLANGED HOUSING (R100423)

'D'

DB11/15 NEMA 56C FR. 9 29/32" (252mm) 21 29/32" (556mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 30 lbs (13.6 kg) 31 lbs (14 kg)
DB11/15 NEMA 145 FR. 9 29/32" (252mm) 20 9/32" (515mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 30 lbs (13.6 kg) 45 lbs (20 kg)
DB11/15 NEMA 184FR. 10 25/32" (274 mm) 23 18/32" (598mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 30 lbs (13.6 kg) 84 lbs (38 kg) UNLESS OTHERWISE S PECIFIED DISTRIBUTION BLOCK

DB11/15 IEC 80 FR. 10 17/32" (267mm) 21 1/16" (535mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 30 lbs (13.6 kg) 35 lbs (16 kg) DIM ENSIO NS A RE IN IN C HES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TOLERA NC ES AR E: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
DB11/15 IEC 90 FR. 10 17/32" (267mm) 21 1/4" (540mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 30 lbs (13.6 kg) 50 lbs (23 kg) FRAC. 1/32 STILL ASSM PURCH DB11/15
DEGREE 1°
FINISH 125 WELD SHOP TITLE
SALES X
DB11/15 IEC 100 FR. 10 19/32" (269mm) 22 3/4" (586mm) 3-5/32" (80 mm) 6-10/32" (160 mm) 30 lbs (13.6 kg) 70 lbs (32 kg) SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM-FLANGED HSG
SIZE: PART NUMBER REV.
DB11/15 IEC 112 FR. 10 19/32" (269mm) 23 1/4" (591mm) 3-3/4" (95 mm) 7-1/2" (191 mm) 30 lbs (13.6 kg) 88 lbs (40 kg) DRAWN: C.M.B 1-6-05 THIRD ANGLE
ENGR:
PROJECTION D R100423 0
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME DIM 'A' DIM 'B' * DIM 'C' DIM 'D' PUMP WT. MOTOR WT.** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:1.75 1O F1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

3 5/16" 'A' *
(84 mm) 9 5/32"
(233 mm)
3" 1 1/2" MNPT
(76 mm) OR MBSP
5 3/4"
(146 mm)

2" FNPT
OR FBSP
5"
(127 mm)

4 11/32"
(110 mm)
8 21/32" 13 17/32"
(220 mm) (344 mm)
9 23/32"

16
(247 mm) 11 3/8" 1 3/32"
(289 mm) (28 mm)
5 3/8"
(137 mm) 1/2" 1/2"
3/8" (13 mm)
NOTES: (13 mm)
9.5mm
1. ALL WEIGHTS ARE ESTIMATED AND FOR REFERENCE ONLY.
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP
COMPONENTS.
3 3/4"
(95 mm)
* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.
** MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF
7 1/2"
MOTOR USED. (191 mm)
DB11/15 OUTLINE DIMENSIONS - THREADED HSG - 80-90 FR B5 (R100451)

UNLESS OTHERWISE SPECIFIED DISTRIBUTION BLOCK

DIMENSIONS ARE IN INCHES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TOLERANCES ARE: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
FRAC. 1/32 STILL ASSM PURCH DB11/15
DEGREE 1°
FINISH 125 TITLE
DB11/15 IEC 80 FR B5 FLANGE 20-1/4" (514 mm) 29 lbs. (13.2 kg) 35 lbs (16 kg) WELD SHOP SALES X
SIGNATURES DATE MACH SHOP ADV
80/90 FRAME B5 OUTLINE DIM
SIZE: PART NUMBER REV.
DB11/15 IEC 90 FR B5 FLANGE 21-11/32" (542 mm) 29 lbs. (13.2 kg) 50 lbs (23 kg) DRAWN: C.M.B 11-22-05 THIRD ANGLE
PROJECTION R100451
ENGR:
D 0
PUMP MODEL MOTOR FRAME DIM 'A' * PUMP WT MOTOR WT ** CAD GENERATED DRAWING, SCALE: SHEET CHECKED
DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:2 1 OF 1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

3 5/16" 'A' *
(84 mm) 9 5/32"
(233 mm)
3" 1 1/2" MNPT
(76 mm) OR MBSP

5 3/4"
(146 mm)

2" FNPT
OR FBSP
5"
(127 mm)

4 11/32"
(110 mm)
8 21/32" 13 17/32"
(220 mm) (344 mm)
9 23/32"

17
(247 mm) 11 3/8" 1 3/32"
(289 mm) (28 mm)
5 3/8"
(137 mm) 1/2" 1/2"
3/8" (13 mm)
NOTES: (13 mm)
9.5mm
1. ALL WEIGHTS ARE ESTIMATED AND FOR REFERENCE ONLY.
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP
COMPONENTS.
3 3/4"
(95 mm)
* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.
** MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF
7 1/2"
MOTOR USED. (191 mm)
DB11/15 OUTLINE DIMENSIONS - UNION HSG - 80-90 FR B5 (R100452)

UNLESS OTHERWISE SPECIFIED DISTRIBUTION BLOCK

DIMENSIONS ARE IN INCHES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TOLERANCES ARE: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
FRAC. 1/32 STILL ASSM PURCH DB11/15
DEGREE 1°
FINISH 125 TITLE
DB11/15 IEC 80 FR B5 FLANGE 20-1/4" (514 mm) 29 lbs. (13.2 kg) 35 lbs (16 kg) WELD SHOP SALES X
SIGNATURES DATE MACH SHOP ADV
80/90 FRAME B5 OUTLINE DIM
SIZE: PART NUMBER REV.
DB11/15 IEC 90 FR B5 FLANGE 21-11/32" (542 mm) 29 lbs. (13.2 kg) 50 lbs (23 kg) DRAWN: C.M.B 11-22-05 THIRD ANGLE
PROJECTION R100451
ENGR:
D 0
PUMP MODEL MOTOR FRAME DIM 'A' * PUMP WT MOTOR WT ** CAD GENERATED DRAWING, SCALE: SHEET CHECKED
DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:2 1 OF 1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

3 5/16" 'A' *
(84 mm)
10 17/32"
SUCTION FLANGE (268 mm)
2" ANSI 150# 4 3/8"
(111 mm)
(2" ISO PN20)
(2" ISO PN40) 5 29/32" DISCHARGE FLANGE
(150 mm) 1.5" ANSI 150#
(1.5" ISO PN20)
(1.5" ISO PN40)

5"
(127 mm)

4 11/32"
(110 mm)
8 21/32" 14 29/32"
(220 mm) (379 mm)
9 23/32"
(247 mm)

18
12 23/32"
(323 mm)
6 23/32"
(171 mm) 1 3/32"
3/8" 1/2" (28 mm)
(9.5 mm) (13 mm) 1/2"
NOTES: (13 mm)
1. ALL WEIGHTS ARE ESTIMATED AND FOR REFERENCE ONLY.
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP COMPONENTS.

* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.

3 3/4"
** MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF (95 mm)
MOTOR USED.
7 1/2"
(191 mm)
DB11/15 OUTLINE DIMENSIONS - FLANGE HSG - 80-90 FR B5 (R100453)

UNLESS OTHERWISE SPECIFIED DISTRIBUTION BLOCK

DIMENSIONS ARE IN INCHES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TOLERANCES ARE: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
FRAC. 1/32 STILL ASSM PURCH DB11/15
DEGREE 1°
FINISH 125 WELD SHOP TITLE
SALES X
DB11/15 IEC 80 FR B5 FLANGE 21-5/8" (549 mm) 31 lbs. (14.1 kg) 35 lbs (16 kg) SIGNATURES DATE MACH SHOP ADV
80/90 FR. B5 OUTLINE DIMW/ FLANGES
SIZE: PART NUMBER REV.
DB11/15 IEC 90 FR B5 FLANGE 22-25/32" (579 mm) 31 lbs. (14.1 kg) 50 lbs (23 kg) DRAWN: C.M.B 11-22-05 THIRD ANGLE
ENGR:
PROJECTION D R100453 0
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME DIM 'A' * PUMP WT MOTOR WT ** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:2 1 OF 1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

3 5/16" 'D' *
(84 mm) 1-1/2"MNPT
OR MBSP 9 7/32"
(233 mm)
3"
(76 mm)

5 3/4"
(146 mm)

2" FNPT OR
FBSP
'C'

1/2"
'B' (13 mm)

'A'

19
'E ' 5 1/2"
NOTES: (140 mm)
1. ALL WEIGHTS ARE ESTIMATED AND FOR REFERENCE ONLY. 15/32"
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP COMPONENTS. (12 mm)

* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.

** MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF
MOTOR USED.

'F'
DB11/15 OUTLINE DIMENSIONS - THREADED HSG - 100-112 FR B5 (R100454)

UNLESS OTHERWISE SPECIFIED DISTRIBUTION BLOCK

DIMENSIONS ARE IN INCHES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TOLERANCES ARE: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
FRAC. 1/32 STILL ASSM PURCH DB11/15
DEGREE 1°
FINISH 125 WELD SHOP TITLE
DB 11/15 112 B5 9-2 1/32" (245 mm) 4-13/16" (122 mm) 4-13/32" (112 mm) 22-19/32" (574 mm) 11-31/32" (3 04 mm) 7-15/32" (190 mm) 33 lbs. (1 5 kg) 88 lbs. (40 kg) SALES X
SIGNATURES DATE MACH SHOP ADV
100/112 FRAME B5 OUTLINE DIM
SIZE: PART NUMBER REV.
DB11/15 100 B5 8-1/16" (205 mm) 4-1/32" (102 mm) 3-30/32" (110 mm) 21-30/32" (557 mm) 11-11/16" (297 mm) 6-10/32"(160 mm) 33 lbs. (15 kg) 71 lbs. (32 kg) DRAWN: C.M.B 11-29-05 THIRD ANGLE
ENGR:
PROJECTION D R100454 0
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME 'A' 'B' 'C' * 'D' 'E' 'F' PUMP WT. MOTOR WT. ** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:2 1 OF 1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

'D' *
3 5/16" 10 15/16"
(84 mm) (278 mm)
4 3/4"
(121 mm) 50 mm
UNION

6 3/8"

63 mm UNION

'C'

1/2"
'B' (13 mm)

'A'

20
'E' 5 1/2"
(140 mm)
15/32"
(12 mm)
NOTES:
1. ALL WEIGHTS ARE ESTIMATED AND FOR REFERENCE ONLY.
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP COMPONENTS.

* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.

** MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF
MOTOR USED. 'F'
DB11/15 OUTLINE DIMENSIONS - UNION HSG - 100-112 FR B5 (R100455)

UNLESS OTHERWISE SPECIFIED DISTRIBUTION BLOCK

DIMENSIONS ARE IN INCHES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TOLERANCES ARE: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
FRAC. 1/32 STILL ASSM PURCH DB11/15 100/112 B5
DEGREE 1°
FINISH 125 WELD SHOP TITLE
SALES X
DB11/15 112 B59-21/32" (245 mm) 4-13/16" (122 mm) 4-13/32" (112 mm) 24-11/32" (618 mm) 13-23/32" (349 mm) 7-15/32" (190 mm) 33 lbs. (15 kg) 88 lbs. (40 kg) SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM- UNION HSG
SIZE: PART NUMBER REV.
DB11/15 100 B58-1/16" (205 mm) 4-1/32" (102 mm) 3-30/32" (110 mm) 23-11/16" (602 mm) 13 -7/16" (341 mm) 6-10/32" (160 mm) 33 lbs.(15 kg) 71 lbs. (32 kg) DRAWN: C.M.B 11-29-05 THIRD ANGLE
ENGR:
PROJECTION D R100455 0
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME 'A' 'B' 'C' 'D' * 'E' 'F' PUMP WT. MOTOR WT.** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:2 1 OF 1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

'D' *
10 9/16"
3 5/16" (268 mm)
(84 mm) 4 3/8"
(111 mm)
SUCTION FLANGE DISCHARGE FLANGE
2" ANSI 150# 1.5" ANSI 150#
(2" ISO PN20) (1.5" ISO PN 20)
(2" ISO PN40) (1.5" ISO PN 40)
5 3/4"
(146 mm)

'C'

'B'

21
'A'
9 27/32" 'E' 5 1/2"
(250 mm) (140 mm)
15/32"
(12 mm)
NOTES:
1. ALL WEIGHTS ARE ESTIMATED AND FOR REFERENCE ONLY.
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP COMPONENTS.
'D'
* DIMENSION DEPENDS UPON MOTOR MANUFACTURER.
** MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF
MOTOR USED. 'E'
DB11/15 OUTLINE DIMENSIONS - FLANGE HSG - 100-112 FR B5 (R100456)

UNLESS OTHERWISE SPECIFIED DISTRIBUTION BLOCK

DIMENSIONS ARE IN INCHES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
TOLERANCES ARE: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
FRAC. 1/32 STILL ASSM PURCH
DEGREE 1°
DB11/15 - 100/112B5 MOTORS
TITLE
FINISH 125 WELD SHOP SALES X
DB11/15 112 B5 9-21/32" (245 mm) 4-13/16" (122 mm) 4-13/32" (112 mm) 23-31/32" (609 mm) 13-11/32" (339 mm) 7-15/32" (190 mm) 33 lbs. (15 kg) 88 lbs. (40 kg) SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM- FLANGE HSG
SIZE: PART NUMBER REV.
DB11/15 100 B5 8-1/16" (205 mm) 4-1/32" (102 mm) 3-30/32" (110 mm) 23-5/16" (592 mm) 13-1/16" (332 mm) 6-10/32"(160 mm) 33 lbs. (15 kg) 71 lbs. (32 kg) DRAWN: C.M.B 12-8-05 THIRD ANGLE
ENGR:
PROJECTION D R100456 0
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
PUMP MODEL MOTOR FRAME 'A' 'B' 'C' 'D' * 'E' 'F' PUMP WT. MOTOR WT. ** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE 1:2 1 OF 1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

'C'*
'B'
4 7/32" 11 13/32"
2" MNPT OR MBSP [29 cm]
[10.7 cm] 3 3/4"
[9.5 cm]

7 1/4"
[18.4 cm]
2" FNPT OR
FBSP

'A' 6 1/8"
[15.6 cm]

22
DB22 Outline Dimensions - Threaded Housing

2 1/2"
[6.4 cm] 6 1/32" 4 9/32"
5" [15.3 cm] [10.9 cm]
[12.7 cm]

'D' (3) 9/16"

[1.4 cm]

NOTES:
1. DIMENSIONS AND WEIGHTS ARE TO BE USED FOR REFERENCE ONLY. 1 3/4"
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP COMPONENTS. [4.4 cm]
3 1/2"
* DIMENSION DEPENDS UPON MOTOR MANUFACTURER [8.9 cm]
**MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF
MOTOR CHOSEN.

DB22 IEC 132 B14 5-3/16" (13.0 cm) 12-3/8" (31.4 cm) 28-15/32" (72.3 cm) 14-3/16" (36.0 cm) 51 lbs (23.1 kg) 160 lbs (72.5 kg)
DB22 IEC 112 B14/B5 4-13/32" (11.2 cm) 12-5/16" (31.2 cm) 25-15/32" (64.7 cm) 12-1/8" (30.8 cm) 48 lbs (21.8 kg) 105 lbs (47.6 kg)
UNLESS OTHERWISE S PECIFIED DISTRIBUTION BLOCK
DB22 IEC 100 B14/B5 3-15/16" (10.0 cm) 12-5/16" (31.2 cm) 24-23/32" (62.8 cm) 12-1/8" (30.8 cm) 48 lbs (21.8 kg) 70 lbs (31.8 kg) DIM ENSIO NS A RE IN IN C HES
TOLERA NC ES AR E:
DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
DB22 IEC 90 B14 3-17/32" (9.0 cm) 12-5/16" (31.2 cm) 23-5/16" (59.2 cm) 11-11/16" (29.7 cm) 48 lbs (21.8 kg) 40 lbs (18.1 kg) .XX .010 PRODUCT:
FRAC. 1/32 STILL ASSM PURCH DB22
DEGREE 1°
FINISH 125 WELD SHOP TITLE
DB22 NEMA 213/215 5-1/4" (13.3 cm) 12" (30.5 cm) 28-5/16" (71.9 cm) 14-1/32" (35.7 cm) 45 lbs (20.4 kg) 160 lbs (72.5 kg) SALES X
SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM- THREADED HSG
SIZE: PART NUMBER REV.
DB22 NEMA 184TC 4-1/2" (11.4 cm) 11-13/32" (29.0 cm) 26-7/16" (67.2 cm) 12-15/32" (31.7 cm) 40 lbs (18.1 kg) 100 lbs (45.3 kg) DRAWN: C.M.B 1-15-08 THIRD ANGLE
ENGR:
PROJECTION D R100534 0
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
MODEL MOTOR FRAME 'A' DIM 'B' DIM 'C' DIM * 'D' DIM * PUMP WT MOTOR WT ** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE DNS 1O F1
 REVISIONS
REV DESCRIPTION DATE APPR'D TRACK

'C'*
'B'
63mm UNION 13 532"
5 15/32" [33.4cm]
[13.9 cm]

7 3132"
[20.3cm]
63 mm
UNION

'A' 6 1/8"
[15.6 cm]

5" 7 25/32" 4 9/32"

DB22 Outline Dimensions - Union Housing

[12.7cm] [19.7 cm] [10.9 cm]

'D'

23
(3) 9/16"
[1.4 cm]

NOTES:
1. DIMENSIONS AND WEIGHTS ARE TO BE USED FOR REFERENCE ONLY.
2. PUMP WEIGHT IS ESTIMATED USING POLYPROPYLENE PUMP COMPONENTS. 1 3/4"
* DIMENSION DEPENDS UPON MOTOR MANUFACTURER 3 1/2" [4.4 cm]
**MOTOR WEIGHT DEPENDS UPON MOTOR MANUFACTURER AND STYLE OF [8.9 cm]
MOTOR CHOSEN.

DB22 IEC 132 B14 5-3/16" (13.0 cm) 14-3/32" (35.8 cm) 30-3/16" (76.7 cm) 14-3/16" (36.0 cm) 51 lbs (23.1 kg) 160 lbs (72.5 kg)
DB22 IEC 112 B14/B5 4-13/32" (11.2 cm) 14-1/32" (35.6 cm) 27-3/16" (69.1 cm) 12-1/8" (30.8 cm) 48 lbs (21.8 kg) 105 lbs (47.6 kg) UNLESS OTHERWISE S PECIFIED DISTRIBUTION BLOCK
DIM ENSIO NS AR E IN INC HES DEPT REC'D DEPT REC'D 921 GREENGARDEN ROAD PHONE: (814) 455-4478
DB22 IEC 100 B14/B5 3-15/16" (10.0 cm) 14-1/32" (35.6 cm) 26-7/16" (67.2 cm) 12-1/8" (30.8 cm) 48 lbs (21.8 kg) 70 lbs (31.8 kg) TOLERA NC ES AR E: ERIE, PENNSYLVANIA 16501 FAX: (814) 455-8518
.XXX .005 PUMP ASSM INJ MOLD
.XX .010 PRODUCT:
DB22 IEC 90 B14 3-17/32" (9.0 cm) 14-1/32" (35.6 cm) 25-1/32" (63.6 cm) 11-11/16" (29.7 cm) 48 lbs (21.8 kg) 40 lbs (18.1 kg) FRAC. 1/32 STILL ASSM PURCH DB22
DEGREE 1°
FINISH 125 TITLE
WELD SHOP SALES X
DB22 NEMA 213/215 5-1/4" (13.3 cm) 13-23/32" (34.8 cm) 30-1/32" (76.3 cm) 14-1/32" (35.7 cm) 45 lbs (20.4 kg) 160 lbs (72.5 kg) SIGNATURES DATE MACH SHOP ADV
OUTLINE DIM-UNION HSG
SIZE: PART NUMBER REV.
DB22 NEMA 184TC 4-1/2" (11.4 cm) 13-1/8" (33.3 cm) 28-5/32" (71.5 cm) 12-15/32" (31.7 cm) 40 lbs (18.1 kg) 100 lbs (45.3 kg) DRAWN: C.M.B 1-16-08 THIRD ANGLE
ENGR:
PROJECTION D R100535 0
CAD GENERATED DRAWING, SCALE: SHEET CHECKED
MODEL MOTOR FRAME 'A' DIM 'B' DIM 'C' DIM * 'D' DIM * PUMP WT MOTOR WT ** DO NOT SCALE DRAWING DO NOT MANUALLY UPDATE DNS 1O F1
DB22 Outline Dimensions - Flange Housing

24
 5(9,6,216
5(9 '(6&5,37,21 '$7( $335 ' 75$&.
 $''(')5$0(72',0(16,21&+$57  0'
 '5$:,1*352'8&7 7,7/(%/2&.83'$7('  0'
 $''('-,6)/$1*(127(6  7'6

& 

',6&+$5*()/$1*( %
   $16,   
PP ,6231 PP
,6231
-,6NJIFPA 
PP

  
 PP
PP

  
PP 68&7,21)/$1*(
$16,
,6231
,6231
-,6NJIFPA

  
PP

  
PP

  
PP

25

PP  
PP PP

' 

 
PP

',6&+$5*()/$1*('(7$,/ 68&7,21)/$1*('(7$,/

 6/276
PP 
 
PP
PP PP
 
PP PP

  
PP
PP
5()(5(1&(

 
PP PP

 
PP PP

$16, $16,
,6231 ,6231
,6231 ,6231
-,6NJIFPA -,6NJIFPA

81/(6627+(5:,6(63(&,),(' ',675,%87,21%/2&.
',0(16,216$5(,1,1&+(6 '(37 5(& ' '(37 5(& ' *5((1*$5'(152$' 3+21(  
72/(5$1&(6$5( (5,(3(116</9$1,$ )$;  
;;;  3803$660 ,1-02/'
;;  352'8&7
)5$&  67,//$660 385&+ '%
127(6 '(*5(( ƒ
),1,6+ 7,7/(
 ',0(16,216$1':(,*+76$5(72%(86(')255()(5(1&(21/< :(/'6+23 6$/(6 ;
 3803:(,*+7,6(67,0$7('86,1*32/<3523</(1(3803&20321(176 6,*1$785(6 '$7( 0$&+6+23 $'9
;287/,1(',0(16,21$/
6,=( 3$57180%(5 5(9
'5$:1  7+,5'$1*/(
',0(16,21'(3(1'68321027250$18)$&785(5 352-(&7,21
5
(1*5
' 
02725:(,*+7'(3(1'68321027250$18)$&785(5$1'67</(2)02725&+26(1 &$'*(1(5$7(''5$:,1* 6&$/( 6+((7 &+(&.('
'21276&$/('5$:,1* '21270$18$//<83'$7( '16 2)