Concrete Seal
solvent-based acrylic seal
Concrete Seal is a protective, non yellowing
seal, effective on either old or newly laid
concrete floors. It protects against grease,
dirt, and damaging stains, and prevents the
concrete from dusting or powdering. During
the concrete’s curing process, the seal
forms a membrane to retain moisture and
regulate the evaporation rate resulting in
a harder, more abrasion resistant surface.
Easily maintained and resistant to alkaline
salts, Concrete Seal may be used on
exterior as well as interior concrete.
Providing Quality Maintenance and Chemical Specialty Solutions with Unparalleled Customer Service
Spartan Chemical Company, Inc.
1110 Spartan Drive
Maumee, OH 43537
1-800-537-8990
www.spartanchemical.com
THE CURING PROCESS: Sealing New Concrete: NOTE: Concrete Seal does not require thinning
The hardening or curing process of concrete 1. As soon as floor is hard enough to support before use. It is not recommended for use on
gives newly laid floors its strength. The strength weight, apply Spartan’s Concrete Seal in a quarry tile or any other glazed surfaces. Concrete
of the concrete is directly related to the length of uniform coat. To prevent snagging on porous Seal penetrates the surface, resulting in an
the curing process. In other words, the longer floors, only rollers or sprayers should be used. exceptionally durable seal. Therefore, the user
the curing process is extended, the stronger may experience difficulty in removing Concrete
2. It is important to cover all portions of the floor -
your floor becomes. Seal.
a gallon of Concrete Seal will cover 400 to 600
Concrete hardens because of a chemical square feet.
SPECIFICATION DATA:
reaction between cement and water. The
3. Do not apply plastic sheets, hay or straw on Non-Volatile Solids - 17.0%
strength of concrete continues to increase as
top of Concrete Seal. Flash Point - 107°F
long as moisture is present for hydration.
Stability
4. The floor will be ready for use approximately
Concrete Seal forms a curing membrane a. Shelf Life in Unopened Container @
four to six hours after sealing.
which retains the moisture in the concrete and 24°C / 75°F - Over one year
regulates the evaporation rate providing a SPECIAL INSTRUCTIONS: b. Accelerated @ 49°C / 120°F -
complete cure, and resulting in a harder, more Minimum 60 days
• It is very important to have adequate
abrasion resistant surface. c. Freeze / Thaw - Freezes and thaws 3
ventilation.
times with no loss of performance.
DIRECTIONS FOR USE: • Any foods, wrapped or unwrapped, should be
Some individuals may be sensitive to removed from the room to be sealed. Be sure to read all Directions, Precautionary
ingredients in this product. Before use, read and First Aid Statements on product labels
• Although Concrete Seal may be applied
product label and Safety Data Sheet. If before use of this or any Spartan product. If
over painted surfaces, a small area should
questions remain, consult your employer or a questions remain, consult your employer or a
be tested prior to complete application. Most
physician. physician. Safety Data Sheets for all Spartan
paints may be applied over Concrete Seal.
products are available from your authorized
1. Machine scrub the floor with a 1:10 dilution of Again, a test area is recommended.
Spartan distributor or by visiting
Spartan’s SC-200 and water. Urethane seals
• The floor should be clean and dry. www.spartanchemical.com.
should either be sanded off or removed with
strippers formulated for this purpose. Rinse • Do not acid etch the floor.
and let dry. • Clean equipment should be used.
2. Apply one coat of Concrete Seal using a • The temperature of the area and materials
lamb’s wool applicator, spraying equipment or should not be lower than 60°.
rollers. Avoid puddling.
• All pilot lights or open flames should be turned
3. After allowing the first coat five to six hours off.
to dry, apply a second coat, moving the
applicator in one direction only. • Ample lighting is important to assure complete
coverage of the floor.
4. Allow overnight drying before use.
Distributed by:
PACKAGING
297755 55-gallon drum
297705 5-gallon pail
Label copy is provided in English. Secondary labels are also available.
GUARANTEE: Spartan’s modern manufacturing and laboratory control insure uniform quality. If dissatisfied with performance of product, any unused
portion may be returned for credit within one year of the date of manufacture. Use product as directed and read all precautionary statements.
For institutional and industrial use only. © SCC 02/16 L2977
