OssBuilder & Kit
3D Pre-Formed Titanium Membrane
• The 3D design eliminates the need for trimming or bending,
enhancing surgical convenience
• It minimizes membrane exposure during the bone healing period
• It requires only a minimal gingiva incision for membrane removal,
resulting in a shorter recovery period
| Anchor ØD | Healing/Cover Cap D
• Prevents the inflow of foreign • Used for securing OB, Anchor, or H
materials into the implant and Tenting screws, which are placed on
secures space for bone grafting top of the anchor or tenting screw Healing
• Available in Ø3.5 mini and Ø4.0 regular • Healing cap is for a non-submerged Cap
(H: 0, 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0mm) procedure for patients with
0.3mm
※ Disposable, Sold separately insufficient soft tissues
(not included in the kit) • Cover cap is for a submerged Cover
procedure for patients with Cap
| Tenting Screw Drill + Stopper/ sufficient soft tissue
• Available in:
| Tenting Screw - Healing Cap: Ø4.0 and Ø5.0 (H: 3mm, 4mm)
• Serves as a support in situations where implant - Cover Cap: 1 type only - Ø4.0 (H: 1.5mm)
placement is difficult
• For soft & normal bone, drill 3mm
• For hard bone, drill 5mm, then place the | AutoBone Collector
Tenting screw • Used for autogenous bone collection
• Available in size: • Capable of collecting up to 4mm in depth
- Tenting Screw Drill: Ø1.0, Ø1.5 • Ø4.0 is included in the kit
- Stopper: 3mm, 5mm, 7mm • Recommended speed: 500 rpm
- Tenting Screw: L: 8.5, 10, 11.5, 13mm ※ Ø3.0, Ø5.0 and Ø6.0 AutoBone Collectors
※ Tenting screws are sold separately, not included in the kit are sold separately
ØD
| Bone Ejector/Defect Gauge
• Tool to remove autogenous bone from the
Soft/Normal bone Ø1.0 bone collector
Hard bone Ø1.5
| 0.9 Hex Hand Driver
• Enables connection to all • Tool to measure the length of bone
components defects
| OssBuilder Selections
OB2 Small horizontal or OB3 Large (>10 mm) horizontal or
vertical bone augmentation vertical bone augmentation
Buccal damage Buccal + Proximal damage Buccal + Proximal +
For larger defects up to 20mm in horizontal length
Lingual damage
| 3D design eliminates the need for trimming or bending
• 3D Pre-formed design improves procedure convenience
• Available in a range of options to accommodate various clinical cases
3D Titanium Membrance OB2 3D Titanium Membrance OB3
| Minimal exposure of membrane during bone healing period
• Suturing with Cover Cap H: 0.3mm minimizes the possibility of exposure
• Healing Caps for non-submerged procedure for patients with insufficient soft tissues
Cover cap is used Healing cap is used
Thickness: 0.3mm Cover Cap Healing Cap Thickness: 3.4 mm
OB2 OB3
3D Bending 3D Bending
Anchor
ET Implant
Patients with sufficient soft tissue Patients with insufficient soft tissue
| A minimal gingiva incision for membrane removal shortens the recovery period
• The round design and strong rigidity maintain
the shape securely without fixation screws
• Second surgery can be performed with
minimal incision
Copyright © 2024 Hiossen Inc. All rights reserved. The President's
270 Sylvan Avenue. Suite 1130, Englewood Cliffs, NJ 07632 “E” Award
888.678.0001 | www.hiossen.com PB24OBKLTR1.0 Recognizing Excellence in Exporting Smiles that last a lifetime
