SCHEDULE OF WORK (CIVIL)

Name of Work: Construction of 80 seated Girl's Hostel with Construction of Dining Hall, Kitchen, MI Room, warden room, Matron room, store and women employee room for 80
seated Hostel at Sainik School, Purulia, West Bengal.
Item No. DSR'21 Items of work Qty Unit Rate Amount
1 SH : Earth work
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or
drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,
1.1 2.8
for all lift , including getting out the excavated soil and disposal of surplus excavated soil as directed, within a
lead of 50 m.
1.1.1 2.8.1 All kinds of soil 760.00 cum 218.60 166136.00
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not
1.2 2.25 exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for 560.00 cum 161.60 90496.00
all lift.
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
1.3 2.26
1.3.1 2.26.1 All kinds of soil 39.00 cum 104.50 4076.00
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing
1.4 2.27 135.00 cum 2161.20 291762.00
complete
2 SH : Concreting
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
2.1 4.1
shuttering - All work up to plinth level :
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm
2.1.1 4.1.3 4.00 cum 7365.15 29461.00
nominal size derived from natural sources)
1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm
2.1.2 4.1.10 130.00 cum 6050.65 786585.00
nominal size derived from natural sources)
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-
2.2 4.10 III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) 172.00 sqm 370.85 63786.00

Extra for providing and mixing water proofing material in cement concrete per bag of work in doses by weight per 50kg
2.3 4.12 46.00 15.00 690.00
of cement as per manufacturer's specification. cement of 50 kg cement
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg
2.4 4.13 per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth 173.00 sqm 113.85 19696.00
lightly soaked in kerosene oil.

C1
Item No. DSR'21 Items of work Qty Unit Rate Amount
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from
natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick
2.5 4.17 bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, 165.00 sqm 681.65 112472.00
including necessary excavation, levelling & dressing & finishing the top smooth.

3 SH : R.C.C.
3.1 5.9 Centering and shuttering including strutting, propping etc. and removal of form for
3.1.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete 980.00 sqm 332.10 325458.00
3.1.2 5.9.3 Suspended floors, roofs, landings, balconies and access platform 1680.00 sqm 766.55 1287804.00
3.1.3 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers 935.00 sqm 608.35 568807.00
3.1.4 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts 585.00 sqm 804.25 470486.00
3.1.5 5.9.7 Stairs, (excluding landings) except spiral-staircases 240.00 sqm 657.75 157860.00
3.1.6 5.9.19 Weather shade, Chajjas, corbels etc., including edges 80.00 sqm 821.35 65708.00
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding
3.2 5.22
all complete upto plinth level.
3.2.1 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. 18000.00 Kg 89.65 1613700.00
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding
3.3 5.22A
all complete above plinth level.
3.3.1 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. 39500.00 Kg 89.65 3541175.00
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement
concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /
Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /
retard setting of concrete, to improve durability and workability without impairing strength; including pumping
of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering,
3.4 5.33 finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable
separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement
content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement

3.4.1 5.33.1.1 All works upto plinth level 180.00 cum 8683.80 1563084.00
3.4.2 5.33.2.1 All works above plinth level upto floor V level 375.00 cum 8964.75 3361781.00
Add for using extra cement in the items of design mix over and above the specified cement content therein.
3.5 5.35 287.00 qntl 688.45 197585.00
4 SH : Brick work
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in
4.1 6.13
superstructure above plinth level up to floor V level.

C2
Item No. DSR'21 Items of work Qty Unit Rate Amount
4.1.1 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 570.00 sqm 1018.05 580289.00
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick
4.2 6.15 570.00 sqm 86.45 49277.00
masonry.
Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks of class designation 12.5 in
4.3 6.29 exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in
cement mortar 1:6 (1 cement : 6 coarse sand)
4.3.1 6.29.1 From ground level upto plinth level 90.00 cum 6769.65 609269.00
Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth
4.4 6.32
level up to floor five level in :
4.4.1 6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 385.00 cum 8190.90 3153497.00
5 SH :Cladding Work
Poviding and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for
kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade,
colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with
5.1 8.2 white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and
polishing of edges to give high gloss finish etc. complete at all levels

5.1.1 8.2.2 Granite stone slab of colour black, Cherry/Ruby red

5.1.1.1 8.2.2.2 Area of slab over 0.50 sqm 15.00 sqm 4425.35 66380.00
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by
the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as
approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar
5.2 8.31 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in 362.00 sqm 1063.45 384969.00
white cement mixed with pigment of matching shade complete.

6 SH : Wood & PVC work

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of
6.1 9.2 0 block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical
grains or cross bands and face veneers on both faces of shutters.
6.1.1 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 57.00 sqm 3086.10 175908.00
6.2 9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). 50.00 sqm 93.65 4683.00
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm
6.3 9.27 in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and
necessary screws
6.3.1 9.27.1 35 mm thick shutters
6.3.1.1 9.27.1.1 with ISI marked M.S. pressed butt hinges bright finished of required size

C3
Item No. DSR'21 Items of work Qty Unit Rate Amount
6.3.1.1.1 9.27.1.1.3 Kiln seasoned selected class of sheesham wood 69.00 sqm 3893.35 268641.00
Providing and fixing M.S. grills of required pattern in frames of windows
6.4 9.48 etc. with M.S. flats, square or round bars etc. including priming coat
with approved steel primer all complete.
6.4.1 9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. 2000.00 Kg 197.70 395400.00
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC
6.5 9.96 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

6.5.1 9.96.1 300x16 mm 61.00 each 260.30 15878.00

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as
6.6 9.97 per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

6.6.1 9.97.3 200x10 mm 61.00 each 90.80 5539.00

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per
6.7 9.100 IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

6.7.1 9.100.1 125 mm 188.00 each 60.05 11289.00

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out
of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of
15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube
6.8 9.119 of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be 196.00 metre 408.25 80017.00
fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and
direction of Engineer in-Charge.

C4
Item No. DSR'21 Items of work Qty Unit Rate Amount
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19
gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall
have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat
moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm
shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of
which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail
and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to
6.9 9.120 form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20
mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side
PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x
15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional
5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent
adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.

6.9.1 9.120.2 30 mm thick pre laminated PVC door shutters 81.00 sqm 2455.10 198863.00
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using
6.10 9.135 wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all

6.10.1 9.135.2 With 12 mm mild steel U beading 240.00 sqm 1051.75 252420.00
7 SH : Steel work
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of
7.1 10.5 block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical
grains or cross bands and face veneers on both faces of shutters.
7.1.1 10.5.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 5.04 sqm 4781.15 24097.00
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild
steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild
steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by
7.2 10.14 mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and
shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as
directed by Engineer-in-charge:
7.2.1 10.14.2 Profile C
7.2.1.1 10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb 150.00 m 471.25 70688.00
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in
7.3 10.17 R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design 37.00 Each 185.95 6880.00
complete.

C5
Item No. DSR'21 Items of work Qty Unit Rate Amount
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140
mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid
7.4 10.18 shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the 23.00 Each 185.20 4260.00
corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying
7.5 10.25
a priming coat of approved steel primer using structural steel etc. as required.
7.5.1 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 875.00 Kg 142.30 124513.00
8 SH :Flooring
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat
8.1 11.19 cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on
20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :
8.1.1 11.19.3 Dark shade pigment using ordinary cement 32.00 sqm 1240.75 39704.00
8.2 11.24 Extra for pre finished nosing to treads of steps of marble stone 192.00 meter 593.30 113914.00
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed
8.3 with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement
mortar 1 : 4 (1 cement : 4 coarse sand) :
8.3.1 11.26.1 25 mm thick 115.00 sqm 1706.60 196259.00
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement
8.4 11.27 mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade 50.00 sqm 2038.55 101928.00
of the slabs, including rubbing and polishing complete.
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified
by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey,
8.5 11.39 Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement 185.00 sqm 1142.80 211418.00
slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water
absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and
8.6 11.47 shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water
based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting
of joints to be made separately).
8.6.1 11.47.2 Size of Tile 600x600 mm 70.00 sqm 1676.15 117331.00

C6
Item No. DSR'21 Items of work Qty Unit Rate Amount
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer),
with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all
8.7 11.49 colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based)
conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of
joints to be made separately).
8.7.1 11.49.2 Size of Tile 600x600 mm 860.00 sqm 1537.40 1322164.00
9 SH : Roofing
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,
9.1 12.41 including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single
socketed pipes.
9.1.1 12.41.2 110 mm diameter 155.00 meter 319.75 49561.00

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC
9.2 rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,
leaving 10 mm gap for thermal expansion.
9.2.1 12.42.3 Single tee with door
9.2.1.1 12.42.3.2 110x110x110 mm 25.00 Each 205.45 5136.00
9.2.2 12.42.6 Shoe (Plain)
9.2.2.1 12.42.6.2 110 mm shoe 25.00 Each 115.95 2899.00
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes
by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting
9.3 12.43
brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

9.3.1 12.43.2 110 mm 80.00 Each 310.85 24868.00

10 SH : Finishing
10.1 13.1 12 mm cement plaster of mix :
10.1.1 13.1.2 1 : 6 ( 1 cement : 6 coarse sand ) 2000.00 sqm 282.00 564000.00
10.2 13.2 15 mm cement plaster on rough side of single or half brick wall of mix :
10.2.1 13.2.2 1 : 6 ( 1 cement : 6 coarse sand ) 2000.00 sqm 324.30 648600.00
10.3 13.9 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.
10.3.1 13.9.1 12 mm cement plaster 50.00 sqm 386.55 19328.00
10.4 13.16 6 mm cement plaster of mix :
10.4.1 13.16.1 1:3 (1 cement : 3 fine sand) 1300.00 sqm 253.05 328965.00
10.6 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer
10.6.1 13.47.1 1300.00 sqm 142.95 185835.00
applied @ 0.90 litre/10 sqm)

C7
Item No. DSR'21 Items of work Qty Unit Rate Amount
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
10.7 13.62
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and
10.7.1 13.62.1 manufactureTwo or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and 57.00 sqm 191.40 10910.00
manufacture
Providing and applying white cement base putty of average thickness 1 mm, of approved brand and
10.9 13.80 4000.00 sqm 123.85 495400.00
manufracturar, over the plaster wall surface to prepare the surface even and smooth complet .
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50
grams/ litre, of approved brand and manufacture, including applying additional coats wherever required,
10.10 13.82
to achieve even shade and colour.

10.10.1 13.82.2 Two coats 4000.00 sqm 113.75 455000.00

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic
10.11 13.85
Compound ) content.
10.11.1 13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre 4000.00 sqm 62.45 249800.00
11 SH:Road Work
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having
with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in
for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement
11.1 16.9 0 mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement 10.00 sqm 1719.00 17190.00
mixed with matching pigments etc. complete as per direction of Engineer-in-Charge

12 SH : Sanitary Installations
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap,
10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle
12.1 17.1
lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the
walls and floors wherever required
12.1.1 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 6.00 Each 5781.35 34688.00
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and
lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device
12.2 17.2
(handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making
good the walls and floors wherever required :
12.2.1 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 12.00 Each 5540.55 66487.00
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete
12.3 17.28
12.3.1 17.28.1 Semi rigid pipe
12.3.1.1 17.28.1.1 32 mm dia 18.00 Each 90.95 1637.00

C8
Item No. DSR'21 Items of work Qty Unit Rate Amount
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6
12.4 17.31 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 18.00 Each 1411.15 25401.00

12.5 19.35 Providing and fixing soil, waste and vent pipes :
12.5.1 19.35.1 100 mm dia
12.5.1.1 17.35.1.2 Centrifugally cast (spun ) iron socketed pipe as per IS : 3989 160.00 meter 1077.40 172384.00
Providing and fixing M.S holder-bat clamp of approved design to Sand Cast iron/cast iron (spun) pipe
embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4
12.6 19.37
graded stone aggregate 20 mm nominal size ) including coast of cutting holes and making good the walls etc.

12.6.1 17.37.1 For 100 mm dia pipe. 64.00 Each 308.45 19741.00
12.7 17.39 Providing and fixing plain bend of required degree .
12.7.1 17.39.1 100 mm dia
12.7.1.1 17.39.1.2 Sand cast iron S&S as per IS - 3989 38.00 Each 439.75 16711.00
Providing and fixing single equal plain junction of required degree with access door , insertion rubber washer 3
12.8 17.43
mm thick , bolts and nuts complete.
12.8.1 17.43.1 100 x 100 x100 mm
12.8.1.1 17.43.1.2 Sand cast iron S&S as per IS - 3989 27.00 Each 731.40 19748.00
12.9 19.44 Providing and fixing single equal plain junction of required degree.
12.9.1 19.44.1 100 x 100 x 100 mm
12.9.1.1 17.44.1.2 Sand cast iron S&S as per IS - 3989 16.00 Each 707.30 11317.00
12.10 17.56 Providing and fixing terminal guard.
12.10.1 17.56.1 100 mm
12.10.1.1 17.56.1.2 Sand cast iron S&S as per IS - 3989 28.00 Each 439.75 12313.00
Providing lead caulked joint to sand cast iron / centrifugally cast (spun) iron pipes and fittings of diameter
12.11 17.58
12.11.1 17.58.1 100 mm 170.00 Each 549.65 93441.00
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm
12.12 17.6 0
complete, including cost of cutting and making good the walls and floors :
12.12.1 17.60.1 100 mm inlet and 100 mm outlet
12.12.1.1 17.60.1.1 Sand cast iron S&S as per IS - 3989 36.00 Each 1671.00 60156.00
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of
12.13 18.65 synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved
quality) for new work :
12.13.1 17.65.1 100 mm diameter pipe 160.00 metre 69.55 11128.00
12.14 17.73 Providing and fixing towel rail 60 cm long (code: AQN-111N) of Jaquar or equivalent.

C9
Item No. DSR'21 Items of work Qty Unit Rate Amount
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not
12.14.1 17.73.2 19.00 Each 600.35 11407.00
less than 190 gms.
13 SH :Water supply
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the
13.1 18.1 0
walls etc.
Internal work - Exposed on wall
13.1.1 18.10.2 20 mm dia nominal bore 50.00 meter 373.35 18668.00
13.1.2 18.10.3 25 mm dia nominal bore 45.00 meter 491.20 22104.00
13.1.3 18.10.5 40 mm dia nominal bore 55.00 meter 725.15 39883.00
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed
13.2 18.11 pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :

13.2.1 18.11.1 15 mm dia nominal bore 80.00 meter 483.85 38708.00

13.3 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
External work
13.3.1 18.12.6 50 mm dia nominal bore 50.00 meter 654.20 32710.00
13.4 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end )
13.4.1 18.17.1 25 mm nominal bore 8.00 Each 532.35 4259.00
13.4.2 18.17.3 40 mm nominal bore 8.00 Each 707.30 5658.00
13.4.3 18.17.4 50 mm nominal bore 2.00 Each 878.25 1757.00
Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of
13.5 18.38
approved quality for new work :
13.5.1 18.38.2 20 mm diameter pipe 50.00 meter 19.65 983.00
13.5.2 18.38.3 25 mm diameter pipe 45.00 meter 25.60 1152.00
13.5.3 18.38.5 40 mm diameter pipe 55.00 meter 36.05 1983.00
13.6 18.4 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
13.6.1 18.40.6 50 mm diameter pipe 50.00 meter 25.25 1263.00
Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work.
13.7 18.41
13.7.1 18.41.6 50 mm diameter pipe 50.00 meter 176.90 8845.00
Providing and fixing G.I Union in G.I. pipe including cutting and threading the pipe and making long screws
13.8 18.46
etc. complete (New work) .
13.8.1 18.46.3 25 mm nominal bore 20.00 Each 369.35 7387.00
13.8.2 18.46.5 40 mm nominal bore 20.00 Each 523.20 10464.00
13.8.3 18.46.6 50 mm nominal bore 20.00 Each 706.70 14134.00

C 10
Item No. DSR'21 Items of work Qty Unit Rate Amount
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and
13.9 18.50
weighing not less than 810 gms.
13.9.1 18.50.1 15 mm nominal bore 25.00 Each 715.05 17876.00
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to
13.10 18.52
IS:8931.
13.10.1 18.52.1 15 mm nominal bore 18.00 Each 594.75 10706.00
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to
13.11 18.53 45.00 Each 500.35 22516.00
IS:8931
13.11.1 18.53.1 15mm nominal bore
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per
13.12 18.53A 41.00 Each 61.70 2530.00
direction of Engineer-in-charge.
13.13 18.58 Providing and fixing PTMT grating of approved quality and colour.
13.13.1 18.58.1 Circular type
13.13.1.1 18.58.1.1 100 mm nominal dia 59.00 Each 33.20 1959.00
13.15 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms 33.00 Each 106.15 3503.00
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with
13.14 18.65 45.00 Each 96.75 4354.00
concealed fitting arrangements, weighing not less than 106 gms.
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality
13.16 18.74
and colour.
13.16.1 18.74.2 15 mm nominal bore with 45 cm length 22.00 Each 107.95 2375.00
14 SH : Drainage
Providing, laying and jointing glazed stoneware pipes class SP-I with stiff mixture of cement mortar in the
14.1 19.1
proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete
14.1.1 19.1.1 100 mm diameter 45.00 meter 375.75 16909.00
14.1.2 19.1.2 150 mm diameter 65.00 meter 591.40 38441.00
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm
14.2 19.2
nominal size) alround S.W. pipes including bed concrete as per standard design:
14.2.1 19.2.1 100 mm diameter S.W. pipe 45.00 meter 895.50 40298.00
14.2.2 19.2.2 150 mm diameter S.W. pipe 65.00 meter 1095.15 71185.00
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber
14.3 19.4 with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50
kg and frame to be not less than 2.70 kg as per standard design
19.4.1 100x100 mm size P type
19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 3.00 Each 2437.50 7313.00

C 11
Item No. DSR'21 Items of work Qty Unit Rate Amount
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with
1:1.5:3 mix (1 cement :1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation
concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside
14.4 19.7 plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat
cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20
mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80cm and 45cm deep including C.I. cover with frame (light duty) 455x610mm internal
14.4.1 19.7.1 diamensions total weight of cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame
15 kg)
14.4.1.1 19.7.1.1 With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 16.00 Each 11530.20 184483.00
14.5 19.8 Extra for depth for manholes :
14.5.1 19.8.1 Size 90x80 cm
14.5.1.1 19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 8.00 metre 8127.45 65020.00
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6
14.6 19.15
(1cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
14.6.1 19.15.2 With 20 mm diameter round bar 20.00 Each 411.95 8239.00
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class
14.7 19.32 designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

14.7.1 19.32.1 With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 2.00 Each 26254.80 52510.00
15 SH :Aluminium Work
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up
standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and
IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be
15.1 21.1 smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium
snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings
and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

C 12
Item No. DSR'21 Items of work Qty Unit Rate Amount
15.1.1 21.1.1 For fixed portion
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic
15.1.1.1 21.1.1.1 1500.00 kg 433.95 650925.00
coating of grade AC 15)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making
15.2 21.1.2 provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required
(Fittings shall be paid for separately)
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic
15.2.1 21.1.2.1 1500.00 kg 521.25 781875.00
coating of grade AC 15)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM
15.3 21.3 rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge
. (Cost of aluminium snap beading shall be paid in basic item):
15.3.1 21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 240.00 sqm 1325.55 318132.00
16 SH : Water Proofing
Providing and laying integral cement based water proofing treatment including preparation of surface as required
16.1 22.7
for treatment of roofs, balconies, terraces etc consisting of following operations.
(a) Applying a slurry coat of neat cement using 2.75 kg /sqm. of cement admixed with proprietary water
proofing compound conforming to IS. 2645 and approved by engineer-in-charge over the RCC slab including
adjoining walls upto 300 mm height i/c cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks / brick bats 25 mm to 11.5 mm size with 50% of cement
mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 &
approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand )
admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to
required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of
walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg./sqm
of cement admixed with water proofing compound conforming to IS : 2645 & approved by Engineer-in-Charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand)
admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge i/c
laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel
with neat cement slurry and making pattern of 300 x 300 mm square 3 mm deep.(e) The whole terrace so
finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above
operations to be done in order and as directed and specified by the Engineer-in-Charge.

(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and
for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge

C 13
Item No. DSR'21 Items of work Qty Unit Rate Amount
16.1.1 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. 810.00 sqm 1502.95 1217390.00
Mraket Providing and fixing hand shower (Health Faucet) (ABS Body) with 8mm dia 1.2 metre long flexble tube & wall
13.18 18.00 Each 1268.15 22827.00
Rate hook ( Code : ALD-CHR-593N ) of Jaquar make or equivalent.
Providing and fixing Snow White Vitreous china special needs range CRUSE SET of CERA or equivalent
make consisting of EWC 710x370x810 mm with" S" Trap Cat no S1021113, cistern cat no S1060106, soft close
seat cover cat. No. B1520110 ,Twin flush fittings cat no B1810112 Wash Basin 510x400 mm Cat. No .
Mraket S2040101 with pedestal cat no S2090101, spatuala single lever faucet Cat. No .E9030451, 2 Nos Wall Mounted
13.19 1.00 Each 51472.00 51472.00
Rate Grab bar 600 mm long Cat No. B2210106 Wall Mounted Hinged hand rail 750x100 Cat no. B2210107
complete including cutting and making good the walls and floors whereever required.

Providing and fixing White Vitreous China Wash basin size 430x605x200 mm Shape Oval type (Code : CNS-
Mraket WHT-705 Under Counter Basin ) of jaquar make or equivalent with single 15 mm C.P. brass pillar taps.(Code
13.20 18.00 Each 7105.94 127907.00
Rate No.FON-40011 ) of jaquar make or equivalent with CP brass waste 32mm ALE 544NFT of jaquar make or
equivalent, all complete
Total 30848837.00
Add additional GST @ 18 % in place of 12% (multiplying factor 0.0633) on DSR items only except market rate
1939932.00
item
Total 32788769.00
Add cost index @ 13 % on DSR items only except market rate item 4236254.00
Total 37025023.00

C 14