Manualslib.

com - Simplified Manuals

Manuals / Brands / Riviera Manuals / TV / RLED-DSG32CHD1000 / Operation manual / PDF

RIVIERA RLED-DSG32CHD1000 OPERATION

MANUAL

Quick Links
Operation Manual
Connection and Setup
Remote Control
Browser
Using Usb Mode
Troubleshooting Guide
Specifications

Table of Contents
operation manual
REGULATORY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
Getting Started
Connection And Setup
Remote Control
Basic Operation
Before using
Menu Operation
programme edit
BROWSER
Using Windows Media Player 11 for Windows XP
FILE SHARE
Using Windows Media Player 12 for Windows 7
Configuring the Option Menu
PVR Function Operation
Using USB mode
Screen Display
Important Unique Buttons
Troubleshooting Guide
Specifications
 LED(BACKLIGHTING) COLOR
TELEVISION

RLED-DSG32CHD1000

OPERATION MANUAL

Please read this manual carefully before operation.

Downloaded from www.Manualslib.com manuals search engine

 Warning

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.

REGULATORY INFORMATION
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
CAUTION
DO not attempt to modify this product in any way without written authorization
from supplier. Unauthorized modification could void the user's authority to operate
this product.
It is not recommended to keep a certain still image displayed on the screen for a
long time as well as displaying extremely bright images on screen.
Figures and illustrations in this User Manual are provided for reference only
and may differ from actual product appearance. Product design and
specifications may be changed without notice.

Downloaded from www.Manualslib.com manuals search engine

 Warning
WARNING
To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To
Rain Or Moisture.
The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc.
The Apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
Attention should be drawn to the environmental aspects of battery disposal. Don’t
throw used batteries in dustbin. Please contact your retailer in order to protect the
environment.
When you install your TV, maintain a distance of at least 4 inches between the TV
and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to
maintain proper ventilation may result in a fire or a problem with the product
caused by an increase in its internal temperature.
No naked flame sources, such as lighted candles, should be placed on the
apparatus;
To prevent the spread of fire, keep candles or other open flames away from this
product at all times.
The device may be malfunction when under electrostatic discharge. It can be
manually resumed by power off and power on again.
To avoid any injury caused by overturn of the product, please always ensure the
whole product was placed within the table surface in horizontal.
CAUTION connecting the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that appliance and has no additional outlets
or branch circuits.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions could result in electric shock or
fire. Periodically examine the cord of your appliance, and its if appearance
indicates damage or deterioration, unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits the appliance.
The MAINS plug is used as the disconnect device, and the disconnect device shall
remain readily operable.
Operating Temperature: 0°C to 35°C
Operating Humidity: ≤80%
Storage Temperature: -20°C to 60°C
Storage Humidity: ≤90%
This equipment is a Class Ⅱor double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection to
electrical earth.

Downloaded from www.Manualslib.com manuals search engine

 Safety instructions
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. 7. Do not block any of the ventilation
2. Keep these instructions. openings. Install in accordance with
3. Heed all warnings. the manufacturer's instructions.
4. Follow all instructions.

5. Do not use this apparatus near water. 8. Do not install near any heat source
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.

6. Clean only with a dry cloth. 9. Do not defeat the safety purpose of
the polarized or grounding type plug.
A polarized plug has two blades with
one wider than other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong is provided for your
safety. When the provided plug does
not fit into your outlet, consult an
electrician for replacement of the
obsolete outlet.

Downloaded from www.Manualslib.com manuals search engine

 Safety instructions
10. Protect the power cord from being 13. Unplug this apparatus during
walked on or pinched particularly at lightning storms or when unused for
plugs, convenience receptacles, long periods of time.
and the point where they exit from
the apparatus.

11. Only use the attachments/ 14. Refer all servicing to qualified
accessories specified by the service personnel. Servicing is
manufacturer. required when the apparatus has
12. Use only with a cart, stand, tripod, been damaged in any way, such as
bracket, or table specified by the power supply cord or plug is
manufacturer, or sold with the damaged, liquid has been spilled or
apparatus. When a cart is used, use objects have fallen into the
caution when moving the cart/ apparatus, the apparatus has been
apparatus combination to avoid exposed to rain or moisture, does
injury from tip-over. not operate normally, or has been
dropped.

ON DISPOSAL
-The fluorescent lamp used in this product contain a small amount of mercury.
-Do not dispose of this product with general household waste.
-Disposal of this product must be carried out in accordance to the regulations of
your local authority.
NOTE
-If the TV feel cold to the touch, there may be a small "flicker" when it is turned on.
This is normal, there is nothing wrong with TV.
-Some minute dot defects may be visible on the screen, appearing as tiny red,
green, or blue spots. However there have no adverse effect on the monitor's
performance.
-Avoid touching the screen or holding your finger(s) against it for long periods of
time. Doing so may produce some temporary distortion effect on the screen.

Downloaded from www.Manualslib.com manuals search engine

 Getting Started
Using the Remote Control
When using the remote control, aim it at remote sensor on the television. If there is an
object between the remote control and the remote sensor on the unit, the unit may not
operate.
• Point the remote control at the REMOTE SENSOR located on the television.
• When using this television in a very brightly lit area, the infrared REMOTE CONTROL
SENSOR may not work properly.
• The recommended effective distance for using the remote control is about 7 meters.
Installing Batteries in the Remote Control
1. Open the cover at the back of the remote control.
2. Install two AAA size batteries. Make sure to match
the “+” and “-” ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Battery Replacement
You will need to install the batteries into the remote control to make it operate following
the instruction below.
When the batteries become weak, the operating distance of the remote control will be
greatly reduced and you will need to replace the batteries.
Notes on Using Batteries:
The use of the wrong type of batteries may cause chemical leakage and/or explosion.
Please note the following:
• Always ensure that the batteries are inserted with the + and - terminals in the correct
direction as shown in the battery compartment.
• Different types of batteries have different characteristics. Do not mix different types.
• Do not mix old and new batteries. Mixing old and new batteries will shorten battery life
and/or cause chemical leakage.
• Replace batteries as soon as they do not work.
• Chemicals which leak from batteries may cause skin irritation. If any chemical matter
seeps out of the batteries, wipe it up immediately with a dry cloth.
• The batteries may have a shorter life expectancy due to storage conditions. Remove
the batteries whenever you anticipate that the remote control will not be used for an
extended period.
• The batteries (battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
CAUTION:
• It may result in an explosion if batteries are replaced incorrectly.
• Only replace batteries with the same or equivalent type.

Downloaded from www.Manualslib.com manuals search engine

 Connection and Setup
Cable Installation
Before the installation and use, please read carefully the relevant content in “Warning
and Safety instructions”.
1. Take out the TV from the wrapping package and put it in a drafty and flat place.
NOTE:
• When you plug or unplug the TV, computer or other equipments, you must make sure
that the AC power has been already shut down;
• When unplugging the power cable or signal cable, please hold the plug (the insulated
part), do not draw the body of the cable.
2. The RF output terminal can be connected with the RF input port of the TV.
3. The output AV terminal of DVD can be connected with the AV input port of the TV
through AV cable.
NOTE:
• Component and AV can not be used at same time for they share of one audio
channel.
4. The output COMPONENT(YPbPr) terminal of DVD can be connected with the
COMPONENT(YPbPr) input port of the TV through AV cable.
5. Connect one end of the VGA cable with the VGA port on computer, connect the other
end of the VGA cable with the VGA port on the TV, and tighten the bolts clockwise on
the each end of VGA cable.
NOTE:
• While connecting the 15-pin VGA, please do not insert the plug overexertedly, for fear
the pin might be broken.
6. Connect one end of the HDMI cable with HDMI output port, connect the other end of
the HDMI cable with the HDMI port on the TV.
NOTE:
• While connecting the HDMI, please aim at carefully, do not insert overexertedly, for
fear the pin might be broken.
7. Sending the TV's audio signal to external audio equipment via the Digital Audio
Output port.
8. Check and make sure that all AV cables are connected with the corresponding ports
correctly.
9. Connect the AC power cable with 100-240V~ power supply.
NOTE：
• The range of power input for the TV is 100-240V~ 50/60Hz, do not connect the TV
power input port with the AC power out of the above range.
• Please hold the insulated part of the plug when you are unplugging the power cable,
do not touch directly the metallic part of the cable.

Downloaded from www.Manualslib.com manuals search engine

 Remote Control
The buttons of the original remote control are as following:
1. : Power, switch on or off TV set.
2. FAV: Switch on/off the favorite
programs list.
3. EXIT: Exit OSD Menu.
4. SLEEP: Press to set the sleep timer.
when the preset length of time has
passed the TV set enters standby
mode.
5. Tuner: Selects the antenna source.
6. MTS: The button can be used to switch
between Mono/Stereo/SAP in ATV
mode. Switch Audio language in DTV
mode.
7. GUIDE: Electronic Program Guide, use
in the DTV mode.
8. CC: Press to selects the closed
caption.
9. SOURCE: Press to selects signal
source.
10. INFO: Press to display the current
programme information on the screen.
11. CH LIST: Press to call up the channel
list. Press again to exit it.
12. : Press to mute or restore sound.
13. SOUND: Changes the sound mode.
14. 0-9(NUMBER BUTTONS): Choose
channels or password importation.
15. ●In DTV mode, press number buttons
and●key to select channel.
16. : Goes to You Tube homepage.
17. @: Browse the web directly.
18. PICTURE: Changes the image mode.
19. MENU: Press to enter the menu screen
for various optional adjustable settings.
20. ▲/▼/◄/►: To select the direction.
21. Zoom-/+: Selects the desired screen
mode.
22. OK: Press to execute the selected item
in the menu screen or enter the desired
value in any input mode.

Downloaded from www.Manualslib.com manuals search engine

 Remote Control

23. Smart TV: Goes to the smart TV

homepage.
24. Apps: Link to various internet and Apps
services.
25. VOL+/ -: Press to adjust the volume
level up or down.
26. CH+/ -: Press to select channels in
ascending or descending order. Page
to the previous or next screen in some
list.
27. : Returns to the previous menu.
28. COLOR BUTTONS: Red/ green/
yellow/ blue key navigation link.
29. : Previous (in USB mode).
30. OPTION: Shortcut to Freeze OFF,PVR
DISK and PVR.
31. : Play / Pause (in USB mode).
32. : Previous (in USB mode).
33. : Fast reverse (in USB mode).
34. USB: Link into USB mode.
35. ■: Stop (in USB/PVR mode).
36. : Fast forward (in USB mode).

NOTE:
• All pictures in this manual are examples, only for reference, actual product may differ
from the pictures.
• The buttons not mentioned here are not used.
8

Downloaded from www.Manualslib.com manuals search engine

 Basic Operation
Turning on and off the TV
■ Turn on the TV
Connect the power cable. If TV has a power switch, turn it on firstly. Then press the
button to turn on the TV.
■ Turn off the TV
Press the button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug
the set from the mains and aerial.
When there is an accident power off, it is recommended to unplug the power cable
from the power socket.
■ No signal
There is No Signal menu on screen when there is no input signal. In ATV/DTV
mode, if there is no signal in five minutes, the TV will turn off automatically. In
PC-RGB mode, the TV set will automatically turn off in one minute if no input signal.
When VGA cable is connected, the TV turns on automatically.
Programme Selection
■ Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to increase channel number.
Press CH - to decrease channel number.
■ Using 0- 9 digital buttons and· button.
You can select the channel number by pressing 0 to 9. (In ATV mode)
In DTV mode, press number buttons and· button to select channel.
■ Example
To select - channel (e.g. Channel 1): Press 1.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
To select --.- channel (e.g. Channel 20.1): Press 2, 0,·and 1 in a short time.
Volume Adjustment
■ Press the VOL+/- button to adjust the volume.
■ If you want to switch the sound OFF, press the .
■ You can release mute by pressing the or increase the volume.
Changing the Input Source
1. You can select the input source by pressing the SOURCE button on the remote
control.
2. Press the▲/▼button to cycle through the input source, and press the OK button to
confirm your choice.

How to Navigate Menus

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
Before using the TV follow the steps below to learn how to navigate the menu in order
to select and adjust different functions. The access step may differ depending on the
selected menu.
1. Press the MENU button to display the main menu.

2. Press the arrow buttons to cycle through the main menu. Press the OK button to
access the submenu.
3. Press the▲/▼button to select the desired sub item, then press the OK button.
4. Press the arrow buttons to select the desired value. The adjustment in the OSD may
differ depending on the selected menu.
5. Press the MENU button to return to the previous menu.
6. Press the EXIT button exit from the menu.
NOTE:
• When an item in MENU is displayed gray, it means that the item is not available or
cannot be adjusted.
• Buttons on the TV have the same function as corresponding buttons on the remote
control. If your remote control is lost or couldn’t work, you may use the buttons on the
TV to select menus. This manual focuses on operation of the remote control.

Configuring the Channel Menu (In Air, Cable mode)

11

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
Before your TV can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e. an Air or a Cable system).
You can select the antenna source in the Input Source menu.

■ Auto Tuning：Press the OK button then select YES to start Auto Tuning. The TV
will begin memorizing all of the available channels.
■ DTV Manual Tuning: Manual store for digital channels.
1. Press the ◄/►button to select channel.
2. Press the OK button to search.
When a channel is found, the searching process will stop, the channel will be saved
with current channel number.
■ ATV Manual Tuning: Manual store for ATV channels.
1. Press the▲/▼ button to select items.
2. Press the ◄/► button to adjust it.
3. When setting is completed, press the red button to save it.
■ Programme Edit
1. Press the ▲/▼ button to select a channel.
2. Press the CH+/ - button to select the following or preceding page.
3. Skip: Press the blue button to skip the channel.
Favorite: Press the FAV button to set the favorite channel.
■ Signal Information (In DTV mode): Display the current Signal Information.

Configuring the Picture Menu

12

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation

■ Picture Mode: You can select the type of picture which best corresponds to your
viewing requirements. Contrast, Brightness, Color, Sharpness, Tint (NTSC) and
Backlight can be adjusted when the picture mode is set to User.
■ Color Temperature: Select the color temperature of the picture.
■ Aspect Ratio: You can select the picture size which best corresponds to your
viewing requirements.
■ Noise Reduction: Reduces screen noise without compromising video quality.
■ Advanced Option: Use the ▲/▼ button to select Advanced Option, and then press
OK.
MPEG NR: Reduces MPEG noise to provide improved picture quality.
Dynamic Contrast: Adjusts the contrast to the optimal level according to the
image's brightness.
Signal Format(in HDMI mode): Selects the range of colors that can be expressed.
Film Mode: Sets the TV so that it senses and then processes film signals from all
sources automatically and adjusts the picture for optimum quality.
■ Screen (In PC-RGB mode)
Auto Adjust: Adjust the image automatically.
Horizontal Pos.: Centre the image by moving it left or right.
Vertical Pos.: Centre the image by moving it up or down.
Size: Adjust the screen size.
Phase: Adjust when characters have low contrast or when the image flickers.

Configuring the Sound Menu

13

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation

• The TV does not support Dolby Digital.

■ Sound Mode: You can select a sound mode to suit your personal preferences.
Items can be adjusted when the sound mode is set to User.
■ Balance: You can adjust the sound balance of the speakers to preferred levels.
■ AVL (Auto Volume Level): AVL automatically remains on the same level of volume
if you change programmes. Because each broadcasting station has its own signal
conditions, volume adjustment may be needed every time when the channel is
changed. This feature allows users to enjoy stable volume levels by making
automatic adjustments for each program.
■ Surround Sound: You can select a desired Surround Sound mode.
■ SPDIF Mode: You can select the SPDIF mode. SPDIF (Sony Philips Digital
Interface) provides digital audio output to speakers and various digital devices such
as A/V Receivers and Home Theaters which reduces interference and distortion.
Configuring the Network Menu

Network Function Operation Instruction

You can set up your TV so that it can access the Internet through your local area
network (LAN) using a wired or wireless connection.
 Connecting to a wired network

14

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
You can attach your TV to your LAN by connecting the LAN port on your TV to an
external modem using a LAN cable.

The Modem Port on the Wall External Modem The LAN Port on the TV
(ADSL/VDSL/Cable TV)

Modem Cable LAN Cable

You can attach your TV to your LAN by connecting the LAN port on the back of your
TV to a IP Sharer which is connected to an external modem.

The Modem Port on the Wall External Modem IP Sharer

The LAN Port on the TV
(ADSL/VDSL/Cable TV) (having DHCP server)

Modem Cable LAN Cable LAN Cable

You may be able to attach your TV to your LAN by connecting the LAN port on your
TV directly to a network wall outlet using a LAN cable. Note that the wall outlet is
attached to a modem or router elsewhere in your house.

The LAN Port on the Wall The LAN Port on the TV

LAN Cable

Wired Network Configuration

1. Connect your TV to your LAN as described in the previous section.
2. Turn on your TV, press the MENU button on your remote, use the arrow buttons to
select NETWORK, and then press the OK button.
3. Press the ▲/▼ button to select Network, and then press the ◄/► button to select
15

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
Wired.
– Configuration：Press the ▲/▼ button to select Configuration, and then press the
OK button.
Network Config.: Select DHCP to set the IP address, netmask, gateway and DNS
values automatically, or Static to set them manually.
IP: The TV’s IP address.
Netmask: Value of the Netmask.
Gateway: Address of the Gateway.
DNS: Address of the DNS.
– MAC Address: Display the mac address.

Wired Network Setup

– How to set up automatically (Wired)
Use the Automatic Network Setup when connecting your TV to a network that
supports DHCP.
1. Connect your TV to your LAN as described in the previous section.
2. Turn on your TV, press the MENU button on your remote, use the arrow buttons
to select NETWORK, and then press the OK button.
3. Use the ▲/▼ button to select Network, and then press the ◄/► button to select
Wired.
4. Select Configuration then press the OK button.
5. Set Network Config. to DHCP.
6. Auto acquires and enters the needed Internet values automatically.
7. If the Network Function has not acquired the network connection values, go to
the directions for Manual.
– How to set up manually (Wired)
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
1. Follow Steps 1 through 4 in the “How to set up automatically” procedure.
2. Set Network Config. to Static.
3. Press the ▲/▼ button to highlight IP, and then press the OK button.
4. Press the ▲/▼ button to highlight the field you want to change, and then use the
number buttons to input the IP address. Press MENU key to return.
5. Press ▲/▼ to highlight Net mask, Gateway and DNS, and edit in the same way
as IP address.
6. When done, select the OK and press OK to connect the internet.
NOTE:
• IP, Net mask, Gateway and DNS address field numbers must be between 0 and
255.
• If you manually set the IP address, you must not use the same IP address for any
other device. The IP address you use should be a private address.
16

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation

Tips for Network Connection:

• Use a standard LAN cable with this TV. Cat5 or better with a RJ45 connector.
• If you have a Dynamic Network, you should use an ADSL modem or router that
supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that
support DHCP automatically provide the IP address, net mask, gateway and DNS
values your TV needs to access the Internet.
• Some networks require a Static IP address. If your network requires a Static IP
address, you must enter the IP address, net mask, gateway and DNS values
manually when you set up the network connection. If you do not know the correct
values to use, please contact your network administrator or internet service
provider.
• Many network connection problems during set up can often be fixed by re-setting
the router or modem. After connecting the player to the home network, quickly
power off and/or disconnect the power cable of the home network router or cable
modem. Then power on and/or connect the power cable again.
 Connecting to a Wireless Network
To connect your TV to your network wirelessly, you need a Wireless LAN Adapter,
which you connect to your TV’s back or side panel USB jack.

The USB Port on the TV

The LAN Port on the Wall Wireless IP sharer

LAN Cable

• To use a wireless network, your TV must be connected to a wireless IP sharer. If

the wireless IP sharer supports DHCP, your TV can use a DHCP address to connect
to the wireless network.
Wireless Network Configuration
1. Connect your TV to Wireless LAN Adapter as described in the previous section.
2. Turn on your TV, press the MENU button on your remote, use the arrow buttons to
select NETWORK, and then press the OK button.
3. Press the ▲/▼ button to select Network, and then press the◄/► button to select
Wi-Fi .
– Base Station: Searches for available wireless networks.
Press the▲/▼button to select the desired network:
Disconnect: Press red button to disconnect to a network.

17

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
Refresh: Press green button to refresh the list.
View Detail: Press yellow button to see the detailed information of a network.
– MAC Address: The MAC address of USB (Wireless LAN Adapter) is displayed.

Wireless Network Setup

– How to set up automatically (Wireless)
If you want to connect AP, AP should support DHCP.
1. Connect your TV to Wireless LAN Adapter as described in the previous section.
2. Turn on your TV, press the MENU button on your remote, use the arrow buttons
to select NETWORK, and then press the OK button.
3. Use the ▲/▼ button to select Network, and then press the ◄/► button to select
Wi-Fi.
4. Select Base Station then press the OK button. The Network function searches
for available wireless networks. When done, it displays a list of the available
networks.
6. In the list of networks, press the ▲/▼ button to select a network, and then press
the OK button.
If the AP is set to Hidden (Invisible), you have to select Other (Hidden WiFi AP)
and enter the correct SSID (Network Name), Security, WEP Type, WEP Key and
Password to establish the connection.
6. Press the ▲/▼ button to select Security. For most home networks, you would
select Security (for Security Key).
7. Press the ▲/▼ button to select Password, then press OK.
8. On the Please Enter screen, enter your network’s Password. To enter the
Password, follow these general directions:
Press the ► button to display the keyboard at the screen.
Use the direction buttons to select the and press OK to cycles through lower
case, upper case.
Use the direction buttons to select the and press OK to cycles through
special symbols, numbers and letters.
To enter a letter or number, move to the letter or number, and then press the OK
button.
To delete the last letter or number you entered, Use the direction buttons to
select and press OK.
Use the direction buttons to select the and press OK to close the
keyboard.
Press OK button to connect directly or press MENU button to return to the
connection menu, and then press the blue button.
9. When done, the Network Connecting screen appears. Wait until the connection
confirmation message is displayed.

18

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
 If Your TV Fails to Connect to the Internet：
• Your TV may not be able to connect to the Internet because your ISP has
permanently registered the MAC address (a unique identifying number) of your
PC or modem, which it then authenticates each time you connect to the Internet
as a way of preventing unauthorized access. As your TV has a different MAC
address, your ISP can not authenticate its MAC address, and your TV can not
connect.
• To resolve this problem, ask your ISP about the procedures required to connect
devices other than a PC (such as your TV) to the Internet.
• If your Internet service provider requires an ID or password to connect to the
Internet, your TV may not be able to connect to the Internet.
• The internet connection may fail because of a firewall problem. If this is the case,
contact your Internet service provider.
Smart Home
Smart Home brings useful and entertaining contents and services directly from the
web to your TV.
Press the Smart TV button on the remote control. The Smart Home display will
appear.
Press the arrow buttons to scroll to the contents you want and press OK.
Press the EXIT button to close the Smart Home display.

1. Press the arrow buttons and OK button to select the desired app to run.
2. Press the EXIT button to exit.
• The practical steps may differ depending on the selected file.
– BROWSER
1. Press the arrow buttons to select BROWSER and press OK.
2. You can use the keyboard to enter the address. Select the browser input
window and press red button to display the keyboard at the screen. Select
characters to enter.
3. After sign in, press the arrow buttons to select the file you want to view, and
press OK.
19

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
4. Press the EXIT button to close the web browser.
Using the Control Panel with Web Browser
The Web Browser has a series of icons across the top of the screen. With these
icons, you can easily use the Web Browser.

A. Go back
If there is no saved previous web page, this icon will not work.
B. Go forward
If there is no saved next web page, this icon will not work.
C. Open the home page
D. Reload current page
E. Enter the URL
F. Open URL
G. Stop loading the current page
H. Open the System Settings
I. Open history
J. Bookmark this page
K. Open the Bookmarks Manager
NOTE:
• Buttons on the TV are not available when using the Network function.
• The video may not play smoothly due to the Internet speed.
• The web browser on this device is a TV browser. It may work differently to PC
browsers.
• Not all web contents that can be accessed by computer may be viewed with this
TV.
• This TV may not be able to do some operations that computer can do.
• Depending on network environment and the use situation, content may be difficult
to view.
• This TV might take time to the start-up and the playback of contents.
• We do not assume at all the responsibility for contents that website offers.
• Unsupported fonts within the provider’s content will not display normally.
• Slow responses and/or interruptions may occur, depending on your network
conditions.
• The web browser supports HTML5 video playing.

When the TV can not be operated by remoter, please turn off the AC power
and restart TV.

20

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation

– FILE SHARE
This TV can display and play many types of movie, photo and music files from your
File Share server and has been certified by File Share for movies, photos and music.
File Share is a cross-industry organization of consumer electronics, computing
industry and mobile device companies. Digital Living provides consumers with easy
sharing of digital media through a wired or wireless network in the home. The File
Share certification logo makes it easy to find products that comply with the File
Share Interoperability Guidelines. This unit complies with File Share Interoperability
Guidelines v1.5. When a PC running File Share server software or other File Share
compatible device is connected to this TV, some setting changes of software or
other devices may be required. Please refer to the operating instructions for the
software or device for more information.
TV PC or other DLNA media servers TV
The USB Port on the TV

The LAN Port

External Modem
on the TV
(ADSL/VDSL/Cable TV)
Wireless IP
sharer
LAN Cable

Depending on the version of Windows, the actual screens on your PC may differ in
which case the same basic set-up information will almost always be applied.
Using Windows Media Player 11 for Windows XP
– How to enable the Universal Plug and Play (UPnP)
1. Click Start, click Run, type appwiz.cpl, and then click OK.
2. Click Add/Remove Windows Components.
3. In the Components window, click Networking Services, and then click
Details.

4. Click to select the UPnP User Interface check boxes in the Subcomponents of
Networking Services window, if it is not selected, and then click OK.

21

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
– How to Add items to the Windows Media Player Library

1. Click the arrow below the Library tab, and then click Add to Library, as shown
in the following screen shot.

2. In the Add to Library dialog box, click one of the following options, as shown in
the following screen shot.

My personal folders. Use this option to search for the digital media files stored
in your personal Music, Pictures, and Videos folders, as well as any files stored
in the public Music, Pictures, and Videos folders that everyone who uses your
computer has access to.
Personal folders are typically located at C:\Documents and
Settings\username\My Documents; whereas, public folders are typically located
at C:\Documents and Settings\All Users\Documents.
Whenever a file is added or deleted from one of these folders, your library is
automatically updated through a process called folder monitoring.
My folders and those of others that I can access. Use this option to monitor
the digital media files stored in your personal Music, Pictures, and Videos
folders, the files stored in the public Music, Pictures, and Videos folders, as well
as the files stored in the personal Music, Pictures, and Videos folders that
belong to other users on your computer.
Note that you can only monitor the files stored in another user's personal folder if
that person has chosen to share the folder with you. For information about how
to share a folder with another person on your computer, see Windows Help and
Support.
3. (Optional) Click Advanced Options, and then do any of the following, as shown
in the following screen shot.

22

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation

To monitor additional folders, click Add, and then specify the location of the folder.
To stop monitoring a folder that you previously added, click the folder that you
want to remove from the list, and then click Remove. To stop monitoring a folder
that has been automatically added, click the folder, and then click Ignore.
To specify whether the Player should add files previously deleted from the
library, select or clear the Add files previously deleted from library check
box.
To prevent files that are smaller than a certain size from being added to the
library, enter the file size limits in the Audio files and Video files boxes.
– Turn on media sharing
If media sharing is not already turned on, you need to turn it on.
1. Click the arrow below the Library tab, and then click Media Sharing.

2. In the Media Sharing dialog box, select the Share my media check box.

– Choose which devices to share your media with

23

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
After you turn on media sharing, you need to select the devices that should have
access to your Player library.
1. In the list of devices below the Share my media to check box, select a device.

2. Do one of the following:

If you want to share your media with the computer or device you have selected,
click Allow.
If you don't want to share your media with the computer or device you have
selected, click Deny.
For information about how to customize what media you share with the device,
see "Change settings for sharing media" in Windows Media Player Help.
Note that you can also allow or deny devices by clicking the notification that
appears when the Player detects a new device on your network.
Using Windows Media Player 12 for Windows 7
– How to set Network Location
1. Click Start, click Control Panel.
2. Click Home network. In the Set Network Location window, click Home
network.

3. Click View or change HomeGroup settings.

4. Click Stream my pictures, music, and videos to all devices on my home
network, and then click Save changes.

24

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation

5. Click Change advanced sharing settings.

6. Click Public.

7. Click Turn on network discovery, Turn on file and printer sharing and Turn
on sharing so anyone with network access can read and write files in the
Public folders.

8. Click Choose media streaming options…

9. Click Allow All.

25

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation

– How to Add items to the Windows Media Player Library

1. Click the Start button, click All Programs, and then click Windows Media
Player.
If the Player is currently open and you’re in Now Playing mode, click the Switch
to Library button in the upper-right corner of the Player.
2. In the Player Library, click Organize.

3. Click Manage libraries, and then click one of the following options:
Music. Click this option to open the Music Library Locations dialog box.
Videos. Click this option to open the Videos Library Locations dialog box.
Pictures. Click this option to open the Pictures Library Locations dialog box.
Recorded TV. Click this option to open the Recorded TV Library Locations
dialog box.
4. Click Add.
5. Find the folder in the list, click Include folder, and then click OK.
– Windows Media Player settings
Requirement Windows Media Player:
Windows Media Player V11 or higher
Windows Media Player shares as following:
• Movie Format Support: MPEG -1 / MPEG-2 / MPEG-4, TS.
• Photo Format Support: JPEG, PNG.
• Music Format Support: MP3, AAC, M4A.
Network and firewall requirements
If you want to share the computer with other Media devices, you must open multiple
firewall ports. If you are using Windows Firewall, the required Transmission Control
Protocol (TCP) and User Datagram Protocol (UDP) ports will automatically open
when the media sharing is working. If you are using other software or hardware
firewall, you may need to manually open these ports.
Computer or other DLNA media servers must be open firewall ports as shown below:
Port Protocol Scope
1900 UDP limited to the local subnet
2869 TCP limited to the local subnet
10243 TCP limited to the local subnet
10280-10284 UDP limited to the local subnet
NOTE:
• If you can not search the shared equipment, please check to see if the UPnP is
blocked by the firewall.

26

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
Playing back shared contents
1.Start the server on your computer or other device that connected on your home
network.
2. Press the Smart TV button on the remote control.
3. Press the arrow buttons to select FILE SHARE, and press OK.
4. Press the ◄/► button to select Movie, Music, Photo or File, and then press the OK
button.
5. Press the arrow buttons to select your computer or other device, and press OK.
6. Press the arrow buttons to select a folder you want, and then press the OK button.
7. Press the arrow buttons to select files you want, and then press the OK button
to mark. Press button to play.
NOTE:
• The TV may not properly play the files produced with certain encoders.
• The TV may not smoothly play the video files with a resolution higher than the
supported resolution for each frame.
• The TV supports the H.264/AVC codec up to the profile level 4.1.
• If you play a video file through the USB connection that does not support the high
speed, the video player may not work properly.
• Video file names that contain special characters may not be playable.
• The playback of videos may be paused, stopped or buffering occurring often
depending on your broadband speed.
• To play the file on the media server, the TV and the media server must be connected
to the same access point. You are recommended to locate both TV and PC in same
subnet. The first 3 parts of the subnet address of the TV and the PC IP addresses
should be the same and only the last part (the host address) should be changed.
(e.g. IP Address: 123.456.789.**)
• Check your network settings when the File Share option does not work properly.
• When the network is unstable, the device may be slower or may need to load during
playback.
• There may be some restrictions by file features and the media server that restrict
playback.
• When selecting Full Screen in File Share mode, the ratio of the outputted screen
may differ from the original.
• If there are too many folders and files in one folder, it may not operate properly.
• Movie thumbnail is only supported when File Share server supports a Movie
thumbnail.
• Files in a folder can be played only when they are of the same type.
• The subtitle file name and movie file name have to be the same and located in the
same folder.
• If subtitle files have been added after a directory has been indexed already, the user
has to remove and readd the folder to the list of shares.
• The playback and operating quality may be affected by your home network
condition.
• The files from removable media such as USB drive, DVD-drive etc. on your media
server may not share properly.

27

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation

Configuring the Option Menu

■ Language: Select your preferred On Screen Display language.

■ Caption: You can select Caption, if available, to be displayed on screen.
■ Restore Factory Default: Restore the system settings to the factory default. When
the restore is complete, the TV will enter standby mode.
■ Auto Sync: Switches the Auto Sync function on or off.
■ Clock: You can display either the DTV Signal Stream Time or set the System Time.
■ Sleep Timer: Select the time to turn the TV to standby mode automatically.
■ Time Zone: Select your time zone.
■ Software Update (USB): Update the TV with the latest firmware by USB.
PVR Function Operation Instruction
 Preparing
 Plug USB flash drive or USB hard disk into USB slot on the TV set.
NOTE:
• USB disk should have capacity at least 512MB.
• USB device must support USB 2.0 high-speed specification.
 Turn TV in to DTV channel, the PVR function can only be used in DTV mode;
 Then press MENU button on the remote to bring the main menu up, press arrows
button to highlight OPTION menu, and then press the OK button;
 Press ▲/▼ buttons to highlight PVR File System (In DTV mode), then press OK
button to go into submenu.
 Setting
– Select Disk: Select a disk used for PVR.
NOTE:
• Some models have two USB input and several disk can be used when two USB
28

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
devices are plugged in.
– Format Start: Format USB disk.
NOTE:
• Before formatting, please back up all important files.
• During the device formatting, do not disconnect the device or turn off the power. If
your USB device can't be formatted or fail to be checked by the system, it means
the device isn't compatible with the TV or is damaged. The larger USB device will
take longer time to format please be patient until the formatting finishes.
– Speed Check: Press OK to check the speed of the storage device.
 Recording
There are two types of recording: Instant Recording and Schedule Recording.
Instant Recording can record the current TV programmes, while Schedule Recording
can start at a specified time and record the TV programmes automatically on the day,
time and duration you choose.
– Instant Recording
 Select the channel you want, press OPTION button and select PVR, A menu will
come up on the screen when TV start recording.
 Press OPTION button to display/hide the recording menu.
 It will keep recording until (stop) button is pressed or the memory is full.

– Schedule Recording
The unit is able to do schedule recording when TV is turned on or in standby mode.
 Press GUIDE button to bring up Programme Guide menu.
 Press ◄/► button to select a channel.
 Press ▲/▼ button to select a program.
 Then press red button will active timer recording submenu. You can set up time
and record mode in the menu.
 Press ▲/▼ button to highlight different setting and press ◄/► button to change
setting. After you have finished adjusting settings to desired options, press the OK
button to save the scheduled recording.
NOTE:
• You can set up several schedule programmes to record. To do this you will need
to press the yellow button in the GUIDE mode which will show you the entire list.
Different schedules should not overlap and there must be at least a 1 minute time
gap to set up between two schedules.
• When recording starts in standby mode, the front indicators will change color and
there will be no picture or sound from the unit. You can press button to turn on
the screen.
 Playing the Recorded Programmes
you can play the recorded programe in USB mode.
 Press USB button to enter the USB mode.

29

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
 Use the ◄/► button to select MOVIE, then press OK.
 Use the arrow buttons and OK button to enter the desired disk.
 Use the arrow buttons and OK button to open the folder.
 Use the arrow buttons to highlight the file. Use the OK button to mark or unmark a
file. Press button to play the selected files. If no file is marked, all the files in
the folder will be played in sequence after you press button.
 Press the MENU button to display the menu screen in playing.
 Press the button to stop the playing file.
 Press the EXIT button to exit.

About Interactivity (GINGA)

This TV has the interactivity feature of Digital TV (Ginga) that allows using applications.
• By selecting a digital channel that has interactivity, it will be possible to visualize and
interact with applications transmitted by broadcasters. The contents can vary and
some examples are: weather forecast, real time news, traffic situation, soap operas
and program descriptions, interactive games, access to bank accounts, government
services, soccer information and other sports.
• If your TV has internet connection and the application allows sending information, it’ll
be possible to interact with the applications answering surveys, making purchases,
casting votes, between others.
* The application must make the aforementioned resources available.
• Observations:
All contents of interactive applications (Ginga) are under responsibility of the TV
broadcasters.
It’s not possible to visualize interactivity (Ginga) and Closed Caption at the same
time.
 To set Interactivity (GINGA)
By selecting a digital channel that has interactivity, the application (Ginga) will be visible
by pressing the OK button or the mentioned button from Ginga.
You can operate the TV with the suggestive information. Press the button to return to
the previous menu. Press EXIT button to exit.
■ Ginga Application: Active the Ginga Application.
■ Ginga: Enable or disable the Ginga feature.
Configuring the Lock Menu

30

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation

■ Lock System: The feature can prevent unauthorized operating the TV set, unless
entering 4-digit password. When Lock System is on and the system is locked, we
must input the system password at Auto Tuning, Manual Tuning, Programme Edit or
Default. Press the right number buttons for the password.
The default password is 0000.
NOTE: • After a password correction has been confirmed, please remember it for
entering into the Parent Guide menu, all functions can not be activated until the
correct password is entered. If you forget, the super password of 0812 still valid.
■ Set Password: You can set your private password. Press the number buttons on
the remote control to set the new password. When the new password has been
input twice, the setting is finished successfully.
■ Block Program (In ATV/DTV mode): Press the green button LOCK to lock the
available program you want. Press the green button again to unlock it. To watch a
locked programme, Enter your 4 digit password number when input screen displays.
■ Parental Guidance (In DTV mode): This feature can prevent children watching
adult’s TV programmes, according to the rating limit set. This function appearance
according the information from broadcasting station. Therefore if the signal has
incorrect information, this function does not operate.
Using USB mode
To Access/Quit USB mode
1. Connect an USB device.
2. Press USB button to enter the USB mode.
3. Press the EXIT button to exit.
NOTE:
• Special USB device may be not or well supported.
• USB max. Load: DC5V 500mA.
The formats supported
The USB function can support the USB device with USB memory.
It can play Movie, Music, Photo or File files.
Movie Format Support: AVI, DAT, MPEG -1 / MPEG-2 / MPEG-4, TS/TP.
Music Format Support: MP3, AAC, M4A.
Photo Format Support: JPEG, BMP, PNG.
File Format Support: TXT.
31

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
NOTE:
• Special algorithm documents may not be or well be supported by the USB.
• The USB supports the format mentioned above, if the file format is not supported,
change it to the given format.

Screen Display

1. Use the ◄/► button to select Movie, Music, Photo or File, and then press the OK
button.
2. Use the arrow buttons and OK button to enter the desired disk.
3. Use the arrow buttons to highlight the folder, and then press the OK button.
4. Use the arrow buttons to highlight a file. Press the MENU button to enter submenu,
then you can copy and paste the file or delete the file.
5. Use the arrow buttons to highlight the file. Use the OK button to mark or unmark a file.
Press button to play the selected files. If no file is marked, all the files in the folder
will be played in sequence after you press button.
6. Press the MENU/OPTION button to display/hide the Play Option Menu in playing.
7. Press the to stop the playing files.
8. Use the arrow buttons to highlight the , and press the OK button to return to the
previous menu screen.
9. Press the EXIT button to return to the USB main menu.
Basic operation
Button Description

Start playing the selected file of a folder or pause.

32

Downloaded from www.Manualslib.com manuals search engine

 Menu Operation
Stop the playing files.
/ You can press / to skip fast reverse or forward.

/ You can select the desired files manually in normal condition.

MTS Select the audio language if available.
PICTURE Change the image mode if available.
SOUND .Change the sound mode if available.
.

33

Downloaded from www.Manualslib.com manuals search engine

 Important Unique Buttons
Programme Guide (In DTV mode)
Press GUIDE button to display the Programme Guide menu. This function let you know
the detailed information of the channel, indicating the time of the program playing. From
the PROGRAMME GUIDE it is possible to check the program information for the next
eight days (If the information is available from the broadcaster). Press EXIT button to
exit.
Record: Press red button to set the parameters for recording. The unit is able to do
schedule recording when TV is turning on or in standby mode. You can set up several
schedule recording. Different schedules should not overlap. When recording starts in
standby mode, the front indicators will change color and there will be no picture or
sound from the unit.
Info: Press green button to see the detailed information of the current channel.
Schedule: Press the yellow button to display the Schedule list.
Remind: If you find the desired program which will be shown in the future. Press the
blue button to book program.

Channel List
Press CH LIST button to display the Channel List.
Press ▲/▼ to select the items.
Press OK button to enter the channel.
Press CH+/CH- button to page up or down the Channel list.
Press CH LIST button to exit.

Favorite List
Press FAV button to display the favorite list.
Press ▲/▼ to select the items.
Press OK button to enter the channel.
Press CH+/CH- button to page up or down the Favorite list.
Press FAV button to exit.

34

Downloaded from www.Manualslib.com manuals search engine

 Troubleshooting Guide
Troubleshooting
Before contact the service technician, perform the following simple checks. If any
program still persists, unplug the TV and calling for serving.
PROBLEM POSSIBLE SOLUTION
- Check whether the main plug has been connected
to a wall let.
No sound and picture - Check whether you have pressed the POWER
button on the front of TV set.
- Check the picture contrast and brightness settings.
- Check the volume.
- Sound muted? Press the MUTE button.
Normal picture but no sound - Try another channel, the problem may be with the
broadcast.
- Are the audio cables installed properly?
- Check to see if there any object between the
product and remote control Causing obstruction.
The remote control does not - Are batteries installed with correct polarity (+ to +,
work - to -)?
- Correct remote operating mode set: TV, VCR etc.?
- Install new batteries
- Is the sleep timer set?
- Check the power control settings. Power
Power is suddenly turned off
interrupted.
- No broadcast on station tuned with auto activated.
- This is normal, the image is muted during the
Picture appears slowly after product startup process. Please contact your
switching on service center, if the picture has not appeared after
five minutes.
- Adjust the color in menu option.
- Keep a sufficient distance between the product and
the VCR.
No or poor color or poor - Try another channel, the problem may be with the
picture broadcast.
- Are the VIDEO cables installed properly?
- Activate the any function to restore the brightness of
the picture.
Horizontal/vertical bars or - Check for local interference such as an electrical
picture shaking appliance or power tool.
- Station or cable product experiencing problems.
Tune to another station.
Poor reception on some
- Station signal is weak, reorient antenna to receive
channels
weaker station.
- Check for sources of possible interference.
- Check the antenna (Change the direction of the
Lines or streaks in pictures
antenna).
No output from one of the
- Adjust balance in menu option.
speakers
35

Downloaded from www.Manualslib.com manuals search engine

 Troubleshooting Guide
NOTE: There is a problem in VGA mode (Only VGA mode applied).
PROBLEM POSSIBLE SOLUTION
- Adjust resolution, horizontal frequency, or vertical
frequency.
The signal is out of range. - Check it whether the signal cable is connected or
loose.
- Check the input source.
Vertical bar or stripe on
- Work the auto configure or adjust clock, phase, or
back ground & Horizontal
H/V position.
Noise & Incorrect position.
Screen color is unstable or - Check the signal cable.
single color. - Reinstall the PC video card.
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the
amount of time you will have your new TV. Be sure to turn the power off and unplug the
power cord before you begin any cleaning.
Cleaning the screen
1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a
mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring
the cloth until it’s almost dry, and then used it to wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn
on your TV.
Cleaning the cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure
not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a
good idea to unplug the power cord to protect against possible damage from
lightning or power surges.

Disposal of old electrical appliances

The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances must
not be disposed of in the normal unsorted municipal waste stream. Old
appliances must be collected separately in order to optimize the recovery
and recycling of the materials they contain, and reduce the impact on human
health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance, it must be separately
collected.
Consumers should contact their local authority or retailer for information
concerning the correct disposal of their old appliance.

36

Downloaded from www.Manualslib.com manuals search engine

 Specifications
Model RLED-DSG32CHD1000

Size 32"( 81 cm)

Product type LED
Aspect ratio 16:9
Resolution 1366*768
Brightness 250cd/m2 (typ.)
Viewing angle 160(H)x160(V)
Voltage input range 100V-240V
SYSTEM & FEATURES
Solution HLS51D-I(MSD6308)
ATV NTSC,PAL-M/N
Audio System M
DTV Type ISDB-T
DTV Tuner Built-in Yes
OSD Language English /Spanish/Portuguese
Max number of channels ATV/193 DTV/400
HD Supporting Yes
Stereo Sound Mono,Stereo,SAP
CONNECTORS
Cable/antenna input 1+1
Composite(AV) 2 mini
YPbPr 1 mini
HDMI 3
VGA 1
Speaker 2x8W
Coaxial/SPDIF 1
RJ-45 1
USB 2
Ginga Yes
Wireless Yes

37

Downloaded from www.Manualslib.com manuals search engine

 Specifications
Browser qjyweb
File share Same function with DLNA

38

Downloaded from www.Manualslib.com manuals search engine