TITAN RECO Clamp
A PATENTED FIXING SYSTEM
• Easy installa�on & efficiency
• Structural advantages
• Safety (no welding)
• Versa�le
TITAN RECO Clamp
TITAN RECO Clamps are a tried and tested versa�le
component that can be used for connec�ng to most
combina�ons of reinforcement.
Product Informa�on
TITAN RECO clamps are designed for the connec�ng and
li�ing of reinforcement, for the prefabrica�on of
reinforcement cages, and the fixity of steel bar
components, on-site.
The clamps are used as an alterna�ve to on-site welding
and are compa�ble with most combina�ons of
reinforcement. The clamps are easy and efficient to
install and do not require any specially skilled labour. As
no welding is requied to install TITAN RECO clamps, there
are no dangerous levels of noise, or exposure to
dangerous gases and fumes to consider on-site, reducing
the need of high administra�on levels and health safety
cer�ficates.
Key Features
• RECO clamp can be installed in all weather condi�ons,
giving huge program savings.
• No welding required, removing many health and safety
risks and associated ac�vi�es.
• Labour Savings – no regular training costs as less skilled
labour can be used i.e. no cer�fied welders.
• Designed for use with the Recostal self-suppor�ng stop
end solu�on for concrete to concrete construc�on joints,
TITAN RECO Clamps are a mul�-use solu�on.
• Reduces health and safety issues - removes the risk of
electric shocks, no exposure to radia�on, noise and
gas as well as removing the need of health and safety
cer�fica�on and qualifica�on checks.
2 www.informuk.co.uk
TITAN RECO Clamp
TITAN RECO Clamps
Made up of a cover plate and either a U bolt or full threaded
flange screws.
Cross Bar Clamp
The Cross Bar Clamp (CB) is available in a combina�on of
cover plate and U-Bolt sizes. Each combina�on is suitable
for a range of reinforcing bar size combina�ons. The CB
clamp is used to fix two reinforcement bars perpendicular
to each other.
Cross Bar Li�ing Clamp
The Cross Bar Li�ing Clamp (CBL) is available in a variety of
cover plates. Each cover plate is suitable for a range of
reinforcing bar size combina�ons. The CBL clamp is used to
connect two reinforcement bars fixed perpendicular to
each other, in prefabricated reinforcement cages on-site.
Parallel Bar Clamp
The Parallel Bar Clamp (PB) uses a type N cover plate
(other cover plate sizes are available). The PB clamp is used
to fix two reinforcement bars parallel to each other.
Parallel Bar Li�ing Clamp
The Parallel Bar Clamp (PBL) uses a type N cover plate
(other cover plates sizes are available). The PBL clamp is
used to li� two reinforcement bars fixed parallel to each
other.
www.informuk.co.uk 3
TITAN RECO Clamp
Parallel Bar Three Bar Clamp
The Parallel Bar Three Bar Clamp (PB3) uses a type N cover
plate (other cover plates sizes are available). The PB3
clamp is used to fix three reinforcement bars parallel to
each other.
Parallel Bar Three Bar U Bolt
Clamp
The Parallel Bar Three Bar U Bolt Clamp (PB3U) uses a type
N cover plate (other cover plates sizes are available). The
PB3U clamp is used to fix three reinforcement bars parallel
to each other.
Double Parallel Bar Clamp
The Double Parallel Bar Clamp (DPB) uses a type N cover
plate (other cover plates sizes are available). The DPB
clamp is used to fix two reinforcement bars perpendicular
to each other (where extra capacity is required).
4 www.informuk.co.uk
TITAN RECO Clamp
Standard Components
Standard Cover Plates
Descrip�on Material Use
Type 0 Steel S275 Plate Cross Bar (CB, CBL)
Type 1 Steel S275 Plate Cross Bar (CB, CBL)
Type 2 Steel S275 Plate Cross Bar (CB, CBL)
Type 0 Steel S275 Plate Parallel Bar (PB, PBL, PB3, PB3U, DPB)
Standard U-Bolts
Dia x width x depth (threa d l ength) Material Use
M10 x 41 x 70 (35mm thread) Grade 8.8 Cross Bar (CB)/Type 0 cover plate
M12 x 50 x 70 (35mm thread) Grade 8.8 Cross Bar (CB)/Type 0 cover plate
M10 x 51 x 75 (40mm thread) Grade 8.8 Cross Bar (CB)/Type 1 cover plate
M10 x 51 x 95 (40mm thread) Grade 8.8 Cross Bar (CB)/Type 1 cover plate
M12 x 60 x 75 (40mm thread) Grade 8.8 Cross Bar (CB)/Type 1 cover plate
M12 x 60 x 95 (40mm thread) Grade 8.8 Cross Bar (CB)/Type 1 cover plate
M10 x 71 x 90 (50mm thread) Grade 8.8 Cross Bar (CB)/Type 2 cover plate
M10 x 71 x 110 (70mm thread) Grade 8.8 Cross Bar (CB)/Type 2 cover plate
M12 x 80 x 90 (50mm thread) Grade 8.8 Cross Bar (CB)/Type 2 cover plate
M12 x 80 x 110 (70mm thread) Grade 8.8 Cross Bar (CB)/Type 2 cover plate
M10 x 30 x 82.5 (45mm thread) Grade 8.8 Parallel Bar (PB,PB3,DPB)/Type N cover plate
M12 x 35 x 105 (50mm thread) Grade 8.8 Parallel Bar (PB,PB3,DPB)/Type N cover plate
M10 x 40 x 100 (45mm thread) Grade 8.8 Parallel Bar (PB,PB3,DPB)/Type N cover plate
M12 x 45 x 120 (50mm thread) Grade 8.8 Parallel Bar (PB,PB3,DPB)/Type N cover plate
M10 x 40 x 120 (75mm thread) Grade 8.8 Parallel Bar (PB,PB3,DPB)/Type N cover plate
Other sizes & bolt combina�ons are available
Please call our technical team on 01223 862230 to confirm the best clamp type based on site
reinforcement layout, sizes and required load capacity.
www.informuk.co.uk 5
TITAN RECO Clamp
TITAN RECO Clamp In use
6 www.informuk.co.uk
TITAN RECO Clamp
Notes:
www.informuk.co.uk 7
The Ischebeck Group
Founded in Germany over 130 years ago, Ischebeck is one
of the world’s principal manufacturers of formwork and
falsework systems. An excellent choice of products are
offered, all supported by first class technical support.
In 2006 Ischebeck Inform became part of the Ischebeck
TITAN Group, and together we were able to offer a greater
choice of solu�ons to our customer base. Since that �me,
we have shared our extensive industry knowledge,
exper�se and collaborated on product development.
Ischebeck Inform Innova�ons
Ischebeck Inform has a reputa�on of supplying truly
innovate and specialist concre�ng products. Our team is
dedicated to researching, carefully sourcing and tes�ng
products and technologies from around the world so we
can offer you a range of solu�ons - from rapid slab
construc�on with K-FORM uPVC Screed Rail to a whole new
way of installing construc�on joints in base slabs and walls
with our exclusive RECOSTAL® permanent stopend system.
We bring you the most cu�ng-edge construc�on solu�ons
that will help change the way you work.
Technical support
Focusing on your par�cular project requirements, we
advise on best product selec�on and offer on-site support;
our team is commi�ed to ensuring that you maximise the
benefits of choosing Ischebeck Inform.
INFORM (UK) Ltd
Industrial Park, Ely Road, Waterbeach, Cambridge CB25 9PG
Tel +44 (0)1223 862230 Fax +44 (0)1223 440246
Email enquiries@informuk.co.uk www.informuk.co.uk
Version II.1.0.RC.B
