RM 6000

RMD 6000
SERIES
Profile Sheet
Narrow-Aisle Reach Truck
RM 6000 Series RM 6000 Series

4"

8" 27" or 30" 20

42"
4"

5.5" 6" 4.3"

32"or 35"

40" 48"
36.5"
14

6.4"
15 13
23.3" max

18
6"

10a
9
4.63" 6.75"
10b 1" 2"

2x ø 4 x 4.1" 2 ø 6 x 2.9"

6.75" 5.75"
2" 2"*
57.5"

2x ø 6 x 4.1" 2 ø 5 x 2.9"

5.25"

2"* 2"
5.75"

9.4" 7.13"
10.4" 37 2 ø 5 x 4.1" ø 10.5 x 4.5"
38 38

*1" on lift heights above 321".

RMD 6000 Series

4"

8" 27" or 30" 20

42"
4"

4.25" 5.5"

32" or 35"

36"
40" 36.5" 14

11.25"
15 13
53.3" max

18
6"

10a
9

10b

1" 1"
6.1" 6.1"

2 ø 4 x 2.9" 2 ø 4 x 4.1"
57.5"
2" 2"
8.1" 8.1"

2 ø 6 x 2.9" 2 ø 6 x 4.1"

2"* 2"
7.2" 7.2"

9.4" 7.13" 2 ø 5 x 4.1"

10.4" 37 2 ø 5 x 2.9"
38
38

*1" on lift heights above 321".

 RM/RMD 6000 Series

1 Manufacturer Crown Equipment Corporation

General Information

2 Model RM 6025 RMD 6025

3 Load Capacity* Max lb 4500 3200
4 Load Center Fork Face to Load CG in 24
5 Power 36 Volts
6 Operator Type Reach Stand
7 Tire Type Load/Caster/Drive Poly / Poly / Poly
8 Wheels (x = driven) Load/Power Unit 4 / 2 (1x)
Mast Type High Visibility MM
9 Lift Height in See Mast Chart Below
10 Guard Height in See Mast Chart Below
13 Forks Standard L x W x T in 36 x 4 x 1.75
Optional Lengths 30, 39, 42, 45, 48
Dimensions

in
14 Carriage Tilt F°/B° degree 3/4
15 Headlength** Compartment “C” in 56.00 60.90
Compartment “D” in 57.80 62.60
Compartment “E” in 60.40 65.30
17 Overall Collapsed Height in See Mast Chart Below
18 Overall Extended Height in See Mast Chart Below
20 Inside Straddle Width
In 1" increments in 34 - 50
37 Tires Size - Drive/Caster in 13 x 5.5 / 8 x4
38 Compartment “C”
Wheelbase (Standard Wheel) in 60.51
Compartment “D” in 62.28
Compartment “E” in 64.88
Chassis

39 Suspension Drive Articulated

Caster Articulated, Swivel
42 Brakes Drive Elec Release / Mech Applied
Caster None
Parking Elec Release / Mech Applied
* Contact factory. Capacity may be subject to derating at height.
** Sideshift included.
Mast Chart TT – RM 6025
9 Lift Height 192" 210" 240" 270" 300" 321" 341" 366" 400"
Free Lift* 41 47 59 71 83 92 101 112 124
10a Guard Height- Top Front 89 95 107 107 107 107 107 107 107
10b Guard Height- Top Back 89 95 95 95 95 95 95 95 95
Mast

11a Flat Guard Height- Top 89 95 95 95 95 95 95 95 95

11b Post Transition 80 86 86 86 86 86 86 86 86
17 Overall Collapsed Height 89 95 107 119 131 140 149 160 172
18 Overall Extended Height* 240 258 288 318 348 369 389 414 448
Minimum Straddle OD 42 42 42 42 42 42 42 45 48
Truck Weight w/o Battery RM 6025
Weight

“C” lb 6323 6442 6610 6918 7179 7463 na na na

Battery Compartment “D” lb 6372 6491 6658 6967 7227 7512 7653 na na
“E” lb 6411 6530 6698 7007 7267 7553 7692 7944 8155
* With load backrest 48".
Note: Above 321", 6" high load wheel standard.
Mast Chart TT – RMD 6025
9 Lift Height 192" 210" 240" 270" 300" 321" 341" 366" 400"
Free Lift* 49 55 67 79 91 100 109 120 132
10a Guard Height- Top Front 89 95 107 107 107 107 107 107 107
10b Guard Height- Top Back 89 95 95 95 95 95 95 95 95
Mast

11a Flat Guard Height- Top 89 95 95 95 95 95 95 95 95

11b Post Transition 80 86 86 86 86 86 86 86 86
17 Overall Collapsed Height 89 95 107 119 131 140 149 160 172
18 Overall Extended Height* 232 250 280 310 340 361 381 406 440
Minimum Straddle OD 42 42 42 42 42 42 42 45 48
Truck Weight w/o Battery RMD 6025
Weight

"C" lb 6508 6627 6795 7104 7364 7650 na na na

Battery Compartment "D" lb 6559 6678 6844 7154 7412 7699 7838 na na
"E" lb 6599 6718 6885 7194 7454 7739 7878 8129 8343
* To reach carriage with load backrest 36".
Note: Above 321", 6" high load wheel standard.
 RM/RMD 6000 Series

Battery Removal Both Sides

45 Type Lead Acid
46 J A
Min Weight/Max Amp-hrs
C Battery Compartment- Up to 321" lb/Ah 2000 / 930
D Battery Compartment- Up to 341" lb/Ah 2280 / 1085
E Battery Compartment - 400" lb/Ah 2600 / 1240
Battery

A Max Battery Size LxWxH

C Battery Compartment in 38.38 x 16.25 x 31
* Width is measured L
on the side of the battery
W D Battery Compartment in 38.69 x 18.00 x 31
with lifting hooks E Battery Compartment in 38.69 x 20.75 x 31
Connector Location / Length (J) A / 9"
Standard Connector SB350 Gray

RM 6000 Series Drive-in Rack Third Post

RMD 6000 Series and Flat OHG Options

Note: Power unit is not centered on the outriggers. In drive-in

rack applications, the power unit will sit closer to the support rails on
the operator side of the truck. Please use caution when specifying.

The outriggers will be offset 1.5" to the left on all outrigger configura-
tions except 42", 43" and 44" OD. These will be offset .25" to the left.
11a See Example Below:

11b

4"

61" 57.5"

42"
7" 4"
53"

Dimensions shown are an example only and are not applicable for all configurations.
 Crown Equipment Corporation
New Bremen, Ohio 45869 USA
Tel 419-629-2311
Fax 419-629-3796
crown.com

You can count on Crown to build lift trucks Because Crown is continually improving its products,
specifications are subject to change without notice.
designed for safe operation, but that’s
only part of the safety equation. Crown Crown, the Crown logo, the color beige, the
Momentum mark, Access 1 2 3, InfoLink, MonoLift,
encourages safe operating practices through OnTrac, Work Assist, InfoPoint and ThermoAssist are
ongoing operator training, safety-focused trademarks of Crown Equipment Corporation. Other
trademarks are property of their owners.
supervision, maintenance and a safe working
Copyright 2011 Crown Equipment Corporation
environment. Go to crown.com and view our
SF18539 10/11
safety section to learn more. Printed in U.S.A.