A registered trademark of SNA Europe Group
ICONOGRAPHY
To assist users in selecting the tools which best fit their needs, the assortment has been organized into:
AREAS OF APPLICATION
Viticulture Pomology Landscape Forestry Garden OUTDOOR
Types of vegetation
Branch Branch Shrubs Hedges Flowers
mature and LIVE and
dry wood GREEN wood
Table Headers
Product EAN code Package Cutting Tool Tool Handle Battery Working Air Blade Blade
code quantity capacity weight length size capacity pressure consumption length length
Ø
Toothing Tooth per Handle File File Round Double edge Flat with Flat with Blade Blade
inch length length diameter 2 straight 2 round length length
edges edges
Left-handed
BLADE TECHNOLOGY
BYPASS: for cutting live and green wood
Bypass secateurs and loppers are used for cuts that affect the health of the plant.
The bypass cutting head owes its name to the fact that the cutting blade “passes-by” the counterblade in a scissor action.
Bahco bypass secateurs slice through the wood as they cut it. This motion requires less force than a straight cut, and
causes less compression damage to the wood.
As with the blade, the counterbla- The wastewood may be damaged But the cut itself is clean and flat
de also presses into the wood
ANVIL: for cutting mature and dry wood
Anvil secateurs and loppers are used where cleanliness of cut is not as important as removal.
The blade is narrower and sharper than that of the bypass secateur.
When cutting mature and dry wood, the blade must be forced through the wood with greater pressure. The “anvil” supports the
branch and spreads the pressure to reduce damage.
As the narrow blade is forced The broad “anvil” spreads the Until the cut is complete
through the wood load and supports the branch
BYPASS ANVIL
4
BLADE TECHONOGY
THE CUTTING EDGE
Four separate grinding operations are performed (Drawing A)
1- Main bevel, the cutting area of the blade is tapered to a point
2- Cavity, a shallow hollow is ground into the inner face of the blade
3- Second bevel, the edge is polished to a razor sharp point
4- Back bevel, an additional honing angle is ground on the inside edge
1 2
Reduced friction and sticking (Drawing B) 3
Due to the hollow inner face, the blade only touches the counterblade at the 4
point of cutting. This reduces friction and the risk of sticking and increases
the performance of the tool.
A B
SLICING CUT
How it works
The sharp upward curve of the blade causes the leading edge to “slice” as
it cuts into wood.
The off-centered pivot bolt doubles this slicing motion increasing the length
of the blade which is used for cutting.
Why it works
Imagine cutting a loaf of bread. No matter how sharp the blade, if you attempt
to cut without slicing, the bread compresses and becomes harder to cut,
therefore requiring more pressure which damages the loaf beyond repair.
Bread and live wood are similar in that they can both be cut more efficiently
if a slicing motion is added to the downward pressure.
Results
Less cutting force required
Clean cut without damaging the plants
Less wear and longer blade life
Fewer broken blades
EVOLVING BEVEL
The evolving bevel technology is the latest improvement of the slicing cut.
A unique grinding profile of the blade reinforces the slicing motion and faci-
litates the penetration into the wood, especially at the beginning of the cut.
This gives the user a feeling of ease, quickness and efficiency during pruning
activities.
The evolving bevel technology is exclusive to Bahco Pradines and utilized in
the P116-SL lopper range.
ERGONOMIC SECATEURS
PROFESSIONAL
The ergonomic secateurS improves your:
Comfort Security Health Efficiency
The design of the ergonomic secateurs results from five years of scientific research and hundreds of user tests all over the
world. The benefit of the design of the ergonomic secateurs has two major advantages for the end-users: less fatigue at the
end of the day and a less painful, longer and more productive working life.
What makes the PX and PXR ergonomic?
FEATURES BENEFITS
Vertical and lateral inclinations Keeps your wrist in a neutral position
Shape of the handles Provides comfort
Elastomer coating on upper handles Helps to spread pressure evenly
Choice of cutting head Provides the right cutting head for each job
Choice of spring Adapts the secateur to the power of your hand
Hand measuring system Guides you to find the best secateur for you
Lateral inclination
Compared to a traditional secateur,
the PX and PXR inclination to the
Vertical inclination left (for right-handed secateurs)
Compared to a traditional compensates the wrist bending
secateur, the PX and PXR down- and allows the hand to remain
ward inclination compensates the in a neutral position, which
wrist bending and allows the hand to improves pressure capacity
remain in a neutral position, which reduces to be applied on handles
the risk of Carpal Tunnel Syndrome. and avoids M.S.D. (Musculo
Skeletal Disorders).
PXR
Professional ERGO™ Secateurs
Features & Benefits
Slicing cut
Elastomer coating on upper handles Less cutting force required
Helps to spread pressure evenly for a clean cut without
damaging the plants
Choice of spring strengths
Adapts the secateur
to the power of the hand
100% Modularity
All spare parts available
PXR SECATEURS
ROTATING HANDLE
■ Secateurs developed according to the scientific ERGO™ process
■ PXR is with a rotating lower handle also covered with soft material
■ Rotating handle to keep contact points in a natural position, designed
for frequent use
■ Cutting head : 2 (20 mm, 3/4”)
■ g oz
731415 mm mm
PXR-L2 8233914 1 L 20 3/4 395 13.9
L R
Why ERGOTM is important
The use of a secateurs has an unquestionable impact on all muscles groups
in your hand and arm, all the way from your shoulder to your hand.
The ERGOTM Secateurs are designed to make the job easier, more
comfortable and less demanding for your muscles and joints.
Choice of spring
Adapts the secateurs
Hand measuring system to the power of the hand
Guides to find the best secateurs
Elastomer coating
on upper handles
Helps to spread pressure evenly
Shape of the handles
Provides comfort
ro me
S yn d
el
n n
Tu
C ar p al
Using the wrong tools can overload the muscles,
causing Muscle Fatigue or even Serious Injuries.
Lateral inclination. The inclination
compensates for the bending of the
wrist, and allows the hand to remain
Vertical inclination. The downward inclination in a neutral position, improving
compensates the wrist bending and allows the pressure capacity to be applied
hand to remain in a neutral position, significantly on handles and prevents MSDs
reducing the risk of Carpal Tunnel Syndrome. (musculoskeletal disorders).
PX & PXR. PROFESSIONAL ERGOTM SECATEURS
ERGONOMIC CONCEPT
EN. Using the wrong tools can overload the muscles, causing muscle fatigue
or even serious injuries.
CARPAL TUNNEL SYNDROME ·
Syndrome du canal carpien · Síndrome túnel carpiano · Karpaltunnelsyndrom
Sindrome del tunnel carpale · Sindrome do túnel carpiano · Σύνδρομο καρπιαίου σωλήνα
CLEANING AND SHARPENING SECATEURS
x5
x1
SHARP-X LUBE-2015
PXR. PROFESSIONAL ERGOTM SECATEURS
Nº1. R801P Nº2 R802P Nº2. R804P Nº3. R803P
Ø 15 mm - 5/8” Ø 20 mm - 3/4” Ø 20 mm - 3/4” Ø 30 mm - 1 1/4”
PXR
ONE-HAND SECATEURS
P1
P108
Designed for pruning vineyards, orchards and ornamental plants
Blades with slicing cut and precision grinding for high performance Narrow cutting head for easy reach
Handles made of composite material in a confortable shape Handles made of strong composite material with a soft grip on the upper part
Push-button locking device for maximum comfort
Spare parts available Spare parts available
P1-23 8332501 5 30 1 1/4 230 9 255 P108-23-F 8275525 2 25 1 230 9 375
Knives
K-Ap-1 K-gp-1
For all gardening work such as pruning, flower cutting and cutting of strings, For all gardening work such as pruning, flower cutting and cutting of strings,
plastics and paper material plastics and paper material
Stainless steel, bow-shaped folding blade Stainless steel, hook-shaped folding blade
Very flat design to fit into the pocket Very flat design to fit into the pocket
Comfortable extremely thin stainless steel handle Comfortable extremely thin stainless steel handle
mm. inch mm. inch
K-AP-1 8030117 10 180 7 90 K-GP-1 8030131 10 170 6 3/4 90
p11 p20
high-quality grafting knife for razor-sharp cutting of the graft and bark
Spatula with round edges for lifting of the bark for the graft insertion high-quality pruning knife for pruning of very delicate trees such as peach
extremely sharp folding blade, folding brass spatula and plastic cover for also used for pruning young trees in nurseries and for thinning out fruit branches
comfortable grip Special hook design of the folding blade and plastic cover for comfortable grip
mm. inch mm. inch
P11 8009076 6 180 7 70 P20 8009281 6 200 8 10
WArrAnty
1. All hand tools in the catalogue are offered with a lifetime warranty; a warranty against material and manufacturing defects for the normal
lifetime of the tool in question. “Lifetime” is defined as the period of time a tool can be expected to last under normal use and conditions.
2. SNA Europe’s range of power tools, pneumatic tools and measuring tools are excluded from point 1 and each has a separate warranty
card supplied with the product covering the specific warranty conditions. Products are designed and manufactured for professional use. The
warranty period is one year (12 months) for professional use and two years (24 months) for private use. The warranty period starts on the
purchase date. This date may be verified with the invoice or any other document of legal value.
3. Defective product will be repaired, replaced or substituted. SNA Europe does not provide for the transportation cost for repaired, replaced
or substituted product.
4. Any product that has been incorrectly used and/or maintained or that is worn from improper use or that has suffered unauthorized
modifications is not covered by this warranty.
5. A warranty claim must be submitted within the warranty period. This requires the submission or shipment of the complete tool in question
with verification of sale documentation, which must validate the purchase date and the product designation, to the retailer or distributor.
6. Replacement or repair of the product will be carried out as quickly as possible. At the reception of the replaced or repaired product the
customer is asked to validate conformity. Replacements and repairs provided under the warranty do not lengthen or renew the warranty
period for the tool.
Lidköping Bollnäs
Bramley
Baugé
Vila do Conde
Vitoria Placencia Irun Minsk Bahco is a registered trademark of SNA Europe Group
