Direct solenoid and solenoid pilot operated valves

Series 59
Individual mounting Series
inline

35

100
Sealed solenoid enclosure
200
To accumulator

55
56
57
Ext. pilot port Pilot valve
Function plate Manual 58
From accumulator operator 59
Check
EXH.
valve
Pilot
Accumulator
EXH.
exhaust
45
CYL. One piece CYL. IN
body
IN 700

Precision ground
molded, balanced spool Internal pilot
900
supply
“O” ring
Valve spring
82
Air/spring return
6300

SERIES FEATURES 6500

6600
• The patented MACSOLENOID® with its non-burn out feature on AC service.
• Seven valve functions in one valve. 1300
• Balanced spool unaffected by back pressure in the exhaust.
• A large checked accumulator which supplies the pilot and air/spring return for consistent shifting. 800
• A triple rated coil for 120/60, 110/50 or 24 VDC (6 Watt).
• Use on lube or non-lube service. ISO 1
• Various types of manual operators and solenoid enclosures.
• Optional low wattage DC coils down to 1 watt.
ISO 2
• Optional explosion proof models designed to meet CSA standards for Class I, Groups B, C, D and ISO 3
Class II, Groups E, F and G. (NEMA equivalent of Class I is NEMA 7; Class II is NEMA 9). MAC125A
MAC250A
MAC500A

61 Consult “Precautions” page 356 before use, installation or service of MAC Valves.
 100% WARRANTY

OF
PRODUCTION
TESTED

100%
18 MONTHS

Series 59

VALVE CONFIGURATIONS AVAILABLE • 2-way Normally Closed-Same as 3-way N.C. but also plug the Exhaust port.
• 3-Way Normally Open (solenoid) or Normally Closed (solenoid or remote air). • 2-way Normally Open-Same as 3-way N.O. but also plug the Exhaust port.
• 2-Way (by plugging Exhaust port), Normally Open (solenoid) & Normally Closed • Selector-Pipe higher pressure to the Inlet port and lower pressure to the Exhaust port.
(solenoid or remote air). • Internal Pilot-Utilized for main valve pressures of 25-150 PSI. Includes a check rod in
• Internal pilot or External pilot for vacuum to 25 PSI main valve pressures on solenoid the body and a 1/8'' pipe plug installed in the External Pilot port.
models. • External Pilot-An External Pilot supply is required when main valve pressures are lower
than 25 PSI. If converting from an Internal Pilot model, remove the 1/8" pipe plug
SERIES FEATURES-REMOTE AIR PILOT OPERATED VALVES
from the External Pilot and remove adapter plate. Remove check rod from the body and
The remote air versions feature:
install an 1/8" pipe plug in the check rod hole and pipe an external supply greater than
• A large checked accumulator for air/spring return.
25 PSI to the External Pilot port. For vacuum service, make the vacuum connection to
• Balanced spool unaffected by back pressure in the exhaust and may be plugged for
the Exhaust port and leave the Inlet port open to atmosphere.
2-way operation.
• Use on lube or non-lube service. N.C.-N.O. OPERATIONS:
SOLENOID MODELS:
APPLICATION CONVERSION PROCEDURE
With the pilot valve available either N.C. or N.O., simply by inverting the function plate,
The balanced spool design and the unique N.C. and N.O. pilot valve function plate on
and using the N.C. main spool, N.C or NO main valve functions are achieved.
solenoid models facilitate using the same valve for 7 different functions.
REMOTE AIR MODELS:
The 7 functions are as follows:
On remote air pilot operated models, N.O. pilot signal must be used for a N.C. main valve
• 3-way Normally Closed-All 3 main valve ports utilized and function plate placed with
function.
"3-C" (3-way N.C.) visible.
• 3-way Normally Open-All 3 main valve ports utilized and function plate placed with
"3-O" (3-way N.O.) visible.

62 Consult “Precautions” page 356 before use, installation or service of MAC Valves.
 Direct solenoid and solenoid pilot operated valves

Series 59
Function Port size Flow (Max) Individual mounting Series
3/2 NO-NC, 2/2 NO-NC 2" - 2 1/2” 60.0 Cv inline

OPERATIONAL BENEFITS

1. Balanced spool, immune to variations of

pressure.
7. Wiping effect eliminates sticking.
8. Pilot valve with balanced poppet, high flow,
35
2. Short stroke with high flow. short and consistent response times.
3. Large spool area provides maximum shifting
forces.
4. Checked accumulator guarantees maximum 100
pilot pressure.
5. Powerful return force thanks to the
combination of mechanical and air springs. 200
6. Bonded spool with minimum friction, shifting
in a glass-like finished bore.
55
56
HOW TO ORDER 57
Port size Pilot air NC only valve NO only valve 58
NC pilot - NC spool NO pilot - NC spool
CYL CYL
59
IN EXH IN EXH

2” NPTF Internal 59B-12-XXYZZ 59B-22-XXYZZ

2 1/2” NPTF 59B-13-XXYZZ 59B-23-XXYZZ
45
2” NPTF External 59B-32-XXYZZ 59B-42-XXYZZ
2 1/2” NPTF 59B-33-XXYZZ 59B-43-XXYZZ

SOLENOID OPERATOR ® XX Y ZZ * 700

XX Voltage Y Manual operator ZZ Electrical connection

900
11 120/60, 110/50, 24 VDC (6.0 W) 0 No operator JA Square connector
12 240/60, 220/50 1 Non-locking JC Square connector with light
22 24/60, 24/50 2 Locking BA Flying leads (18”) 82
52 24 VDC (2.5 W) CA Conduit 1/2” NPS
78 24 VDC (24.0 W) EA Hazardous location
61 24 VDC (8.5 W)
6300
* Other options available, see page 349.
6500
Note : Hazardous location option supplied with no manual operator (“0”). DC voltage not available below 6 Watts.

6600
1300
800
ISO 1
ISO 2
ISO 3
MAC125A
MAC250A
MAC500A

63 Consult “Precautions” page 356 before use, installation or service of MAC Valves.
 100%
18
WARRANTY

OF
PRODUCTION
TESTED

100% MONTHS

Series 59

technical data

Fluid : Compressed air, vacuum, inert gases

Pressure range : Internal pilot : 25 to 150 PSI
External pilot : vacuum to 150 PSI
Pilot pressure : 25 to 150 PSI (Not to exceed main valve pressure by more than 50 PSI)
Lubrication : Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
Filtration : 40 µ
Temperature range : 0°F to 120°F (-18°C to 50°C)
Flow (at 6 bar, ∆P=1bar) : 2" (55.0 Cv), 2 1/2" Cv (60.0 Cv)
Leak rate : 300 cm3/min
Coil : General purpose class A, continuous duty, encapsulated
Voltage range : -15% to +10% of nominal voltage
Protection : Consult factory
Power : ∼ Inrush : 33 VA Holding : 19.7 VA
= 1 to 24 W
Response times : 24 VDC (8.5 W) Energize : 38 ms De-energize : 25ms
120/60 Energize : 35-45 ms De-energize : 25-34 ms

Spare parts : • Solenoid operator (power ≥ 6 W) : D4-XXAAB, cover mounting screws 32222 and seal B5-6001.
• Pilot valve : 250B-XXYZZ, including mounting screws 32203 and function plate A2-7005. • Check valve : 70019.

Options : • BSPP threads.

Dimensions shown are metric (mm)

dimensions
PILOTEXH

EXTPILOT

157.5
Ø 12.7

270.4
214.9
CYL IN
EXH 157.7
178.4

110.1

77.9
67.3 155.7
98.4

64 Consult “Precautions” page 364 before use, installation or service of MAC Valves
 O p t i o n s

OPTIONS

Codification table for voltages / Manual operator / Electrical connection / Wire length

VALVE CODE ® - XX Y ZZ (-VV)

1 2 3 4

OPTIONS AVAILABLE FOR OPTIONS AVAILABLE FOR

- valves type 100 Series - valves type 200 Series

- pilot valves "CNOMO"

- Pilot operated valves with pilots type 100 Series - pilot operated valves with pilots type 200 Series
Series : 55 - 56 - 700 - 800 - 900 Series : 200 - 57 - 58 - 59.
- 6300 - 6500 - 6600 - 1300
- ISO 1 - ISO 2 - ISO 3.
- MAC 125 - MAC 250 - MAC 500

- Pilot operated valves with pilots "CNOMO"

Series : ISO1 - ISO2 - ISO3

349 Consult “Precautions” page 356 before use, installation or service of MAC Valves.
 OPTIONS

Used on valve series: 100, 55, 56, 700, 800, 900, 6300, 6500, 6600, 1300, MVA1C, Used on valve series: 200, 57, 58, 59.
MVA2B, MVA3B, MAC125, MAC250, MAC500.
1. VOLTAGE (100 Serie type coil) 1. VOLTAGE (200 Serie type coil)

- XX Y ZZ VOLTAGE - XX Y ZZ VOLTAGE
11 120/60, 110/50 11 120/60, 110/50, 24 VDC (6 W)
12 240/60, 220/50 12 240/60, 220/50
13 100/60, 100/50 13 100/60, 100/50
15 200/60, 200 /50 14 200/60, 200/50
16 10/60 20 6/60
20 6/60 21 12/60
21 12/50, 12/60 22 24/60, 24/50
22 24/60, 24/50 23 32/60, 32/50
23 32/60, 32/50 24 48/60, 42/50
24 48/60, 42/50 25 240/50
26* 380/50, 440/50, 440/60, 480/60 26 480/60, 440/50
29 220/60 27 127/60
34 127/50, 120/50 28 415/50
35 48/50 29 220/60
36 16/60 30 380/50
B1 24/50 31 550/60, 550/50
50 24 VDC (6 W) 32 120/60, 110/50
51 24 VDC (4 W) 33 600/60
54 12 VDC (4 W) 34 127/50
55 12 VDC (6 W) 35 48/50
57 12 VDC (2.5 W) 50 24 VDC (6 W)
59 24 VDC (2.5 W) 51 24 VDC (4.5 W)
60 12 VDC (8.5 W) 52 24 VDC (2.5 W)
61 24 VDC (8.5 W) 53 24 VDC (1.0 W)
64 6 VDC (6 W) 55 12 VDC (6 W)
65 32 VDC (7 W) 57 12 VDC (2.5 W)
66 48 VDC (5.8 W) 58 48 VDC (2.5 W)
67 64 VDC (7.5 W) 60 12 VDC (9.5 W)
68 120 VDC (6.4 W) 61 24 VDC (8.5 W)
69* 220 VDC (8.7 W), 250 VDC (11.2 W) 64 6 VDC (8.5 W)
75 90 VDC (8.8 W) 65 32 VDC (10 W)
76* 100 VDC (6.9 W) 66 48 VDC (11.5 W)
84* 125 VDC (10.9 W) 67 64 VDC (10.5 W)
87* 24 VDC (17.1 W) 68 120 VDC (12.3 W)
88* 12 VDC (17.4 W) 69 250 VDC (9.2 W)
89* 36 VDC (18.8 W) 71 8 VDC (8.2 W)
90 28 VDC (8.2 W) 72 24 VDC (12 W)
91* 6 VDC (10.6 W) 73 198 VDC (10 W)
92 190 VDC (6.5 W) 74 72 VDC (11.3 W)
94 3 VDC (7 W) 75 90 VDC (11.3 W)
95 38 VDC (6.4 W) 76 100 VDC (9 W)
A1 24 VDC (1 W) 77 220 VDC (10 W), 230 VDC (11.6 W)
A2 12 VDC (1 W) 78* 24 VDC (24 W)
A3 9 VDC (1 W) 80 55 VDC (10.6 W)
MOD. DD01 : Protection diode (DC) - MAX. 8.5W 82 170 VDC (11.1 W)
MOD. MOV1 : Protection varistor (AC) - MAX. 8.5W 83 15 VDC (8.1 W)
* Voltages are CLSF only 84 125 VDC (10 W)
86 36 VDC (11 W)
93* 12 VDC (24 W)

350 Consult “Precautions” page 356 before use, installation or service of MAC Valves.
 O p t i o n s

OPTIONS

2. MANUAL OPERATOR (Common options for 100 & 200 Series type coils)

- XX Y ZZ MANUAL OPERATOR
0 No operator 5* No Operator with Light
1 Non-locking recessed 6* Non-Locking Recessed with Light
2 Locking recessed 7* Locking Recessed with Light
3 Non-locking extended 8* Non-Locking Extended with Light
4 Locking extended 9* Locking Extended with Light
* Lights used with “AA” electrical connection

3. ELECTRICAL CONNECTION (100 Serie type coil) 3. ELECTRICAL CONNECTION (200 Serie type coil)

- XX Y ZZ ELECTRICAL CONNECTION - XX Y ZZ ELECTRICAL CONNECTION

AA Wiring box with 1/2" NPS conduit AA Wiring box with 1/2" NPS conduit
BA Flying leads BA Flying leads
CA 1/2" NPS conduit CA 1/2" NPS conduit
CC 1/2" NPT conduit CC 1/2" NPT conduit
FA Military type 2 PIN EA Explosion proof (200 Series)
GA Military type 3 PIN EA Explosion proof (57, 58 & 59 Series)
HA AA with ground wire FA Military type 2 PIN
JA* Square connector GA Military type 3 PIN
JB Rectangular connector HA AA with ground wire
JC* Square connector with light JA* Square connector
JD Rectangular connector with light JC Square connector with light
JE Square connector on top JJ Square connector, male only
(ISO2, ISO3) NA CA with ground wire
JF Rectangular connector on top NC CC with ground wire
(ISO1, ISO2, ISO3)
JG JE with light
JH JF with light
JJ Square connector, male only
JM Rectangular connector, male only
MA Electrical common conduit
(100 Series-Manifold/900 Series)
MB Electrical common conduit
(100 Series-Stacking/700 Series)
NA CA with ground wire
NC CC with ground wire
RA 3/8" NPS conduit
* Not to be used with 100, 800 and 900 Series manifold mounting

351 Consult “Precautions” page 356 before use, installation or service of MAC Valves.
 OPTIONS

4. COIL WIRE LENGTH (Common options for 100 & 200 Serie type coils)

- XX Y ZZ (-VV) WIRE LENGTH

AA 18”
AB 24”
AD 36”
AE 48”
AF 72”
AG 6”
AR 12”
AU 120”
BA 60”
BB 144”
Series 6000 : wire length, from the base
MOD L024 24”
MOD L036 36”
MOD L048 48”
MOD L060 60”
MOD L072 72”
MOD L120 120”

352 Consult “Precautions” page 356 before use, installation or service of MAC Valves.