Question Bank (HSE)
Sr.
Questions Ans.
No.
1.What is the percentage of oxygen in air?
1 A. A) 1% by volume of oxygen B. C) 78% by volume of oxygen
C.B) 21% by volume of oxygen D.D) None
SWL stands for:
2 A.Standard working limit B.Safety with limit
C.Safe working load D.None
The aim of near miss reporting system is to:
3 A.Prevent accidents B.Accident analysis
C.Fault finding D.safety participation
Accidents can be prevented by:
4 A.Engineering controls B.Competency, Training & Awareness
C.Administrative controls D.All of the above
If a machine guard is loose or missing you should
5
A.Use duct tape to fix the problem B.Leave the area immediately
C.Use the machine carefully D.Not use the machine until repaired
Which of the following is NOT hazardous waste
6
A.Pesticides B.Organic plant refuse
C.Batteries D.Heavy metals
If more than one person is performing maintenance, who should lock and tag the equipment
7 A.Everyone performing maintenance B.The lead maintenance person
C.Management D.Equipment operator
Ladders can be used by
8 A.Anyone who needs one B.Only Maintenance people
C.Only trained employees D.Only management
Before starting a Lockout-Tag out you should
9 A.Gather all your tools B.Know all the isolation points
C.Clean the equipment D.Brief security personnel
The first step in Lockout Tag out is
10 A.Put a lock on the main power source B.Sign all tags
C.Put off main supply D.Inform the equipment operator
Who can remove locks and tags, in LOTO system?
11 A.Equipment operator B.Management
C. Person who placed the locks and tags D.Head of Section.
The emergency stop button is for
12 A.Normal starting and stopping of equipment B.For me to use if someone is caught/ problem in a machine
C.Only for managers and supervisors D.Only for Fire Department Use
Electrical Shock can cause
Page: 1 of 4
13 A.Hearing Loss B.Blindness
C.Death D.Chemical sensitivity
Before using electrical tools
14 A.Check the rating on the label B.Check that the handle is black
C.Certification by competent person to be ensured D.All of the above
The responsibility for Fire Prevention belongs to
15
A.Managers B.Everyone
C.Supervisors D.Fire Department
In the event of a fire alarm I should
16 A.Leave the building immediately B.Keep working and not worry about it
C.Move to the back of the building D.Report it within a week
Flammable liquids should be
17 A.Stored only in glass bottles B.Stored only in flammable storage lockers
C.Stored outside next to the building D.Put on the bottom shelf
Confined Spaces can have
18 A.Areas with limited access B.Electrical Hazards
C.Areas with atmospheric hazards D.Any or All of the above
Before entering a confined space you should
19 A.Read the Safety Manual B.Have the right kind of hearing protection
C.Know the emergency signals D.Review the hazard assessment for that space
Flammable limit for CO?
20
C.5.9% - 14% D.16% - 25%
If you see a broken part on a tool or piece of equipment you should
21 A.Tell a supervisor B.Try to repair it
C.Use it carefully D.Both B and C
Equipment hazards include
22 A.Amputation B.Noise
C.Electric Shock D.All of the above
Ladders with loose rungs should be
23 A.Used carefully B.Never used
C.Used by experienced personnel D.Held firmly by an assistant
Most accidents are caused by
24
A.Bad weather B.Equipment
C.Unsafe act by People D.Poor directions
Work permit can be given for a maximum period of:
25 A.5 days B.6 days
C.8 days D.7 days
For Confined space entry the minimum limit of Oxygen shall be:
26 A.19.5% B.18%
C.19% D.17%
Excavation permit is applicable for the excavation of up to:
Page: 2 of 4
27 A. 2m B.1.5m
C.30 cm D.3 m
Which is lighter than air?
28 A.LPG B.NG
C.H2 D.NGL
Permit acceptor shall be responsible for:
29 A.Safety of persons performing the jobs B.Ensure use of required and need base PPEs
C.Adopt safe method of working D.All of the above
Color of LPG Cylinder?
30 A.Blue B.Red
C.Green D.Colorless
CPR means
31 A.Cardio-Pulmonary Resuscitation B.Cathode Proton Ransom
C.Cathode Protection Ray D.Critical Phase Reaction
If your friend got electrocuted than what will you do?
32 A.Apply water over it B.Pull out the person
C.Switch off the main supply D.Take snaps
Fire triangle consists of FUEL, HEAT and…
33
A.Hydrogen B.Oxygen
C.Nitrogen D.water
If you see bare or exposed wires you should
34 A.Wrap them in tape B.Cut the wires to prevent a fire
C.Warn others and report it to a Supervisor D.Turn off supply
In electrical fire what is the best extinguishing media?
35 A.Water type B.CO2
C.Foam D.None
Defensive Driving is
36 A.An attitude about driving B.A way to drive faster
C.Not required at all times D.required by law
What is NOT allowed in general storage areas
37 A.Bulk paper B.Food
C.Flammable liquids D.Office machines
The purpose of a machine guard is to
38 A.Protect the machine B.Improve efficiency
C.Prevent fires D.Protect the operator
Machine guarding comes under control of accident prevention
39 A.Administrative control B.Competency and training
C.Engineering control D.All of the above
In home …… gas is used for cooking?
40 A.Hydrogen B.NGL
C.LPG D.NH3
Page: 3 of 4
For vessel entry lighting voltage level is
41 A.24V B.240V
C.2.4V D.6.6V
Which one is toxic gas?
42
A.Air B.Oxygen
C.CO D.LPG
Which one is flammable gas?
43 A.Carbon dioxide B.Oxygen
C.Hydrogen D.Chlorine
In case LPG leakage what not to do?
44 A.Open window of free ventilation B.Switch off the electrical switches
C.Do not touch electrical switches D.None
As per the new norms of AMNS what is the minimum distance to be maintained
45 A.2 m B.1.5m
C.1 m D.0.5m
What is the validity of work at height pass?
46 A.6 months B.1 year
C.3 months D.2 years
Safety harness mandatory for working above____ height
47 A.2 m B.1m
C.3 m D.4 m
Probability of the event that might occur X Severity of the event if it occurs =
48 A.Accident B.Hazard
C.Risk D.None of the above
The following is indirect cost of accident
49 A.Money paid for treatment of worker B.Compensation paid to worker
C.Cost of lost time of injured worker D.All of the above
Class-A fire consists of fire due to
50 A.Wood B.Oil
C.Electric D.Chemical
Page: 4 of 4
