BOMBAY TUTORIAL
FAST TRACK WEEKEND BATCHES FOR COMPETITIVE CIVIL
ENGINEERING GOVT. EXAM
Address - Vijaydeep Building,Near mangala school,
Thane(E), Mumbai (9029621228) Total Marks - 75
BMC & PWD 2018 (TECHNICAL)
1) Std practice is to carry out Curing at ---------% Humidity.
1)35 2)99 3)90 4)80
2) ) Factor of safety for Concrete is based on its --------
1) Yield stress 2) Ultimate stress 3) Both 4) None
3) Creep is reported after a period of --------- years.
1) 3 2) 4 3) 5 4) 1
4) Shrinkage is reported after a period of ------- years
1) 3 2) 4 3) 5 4) 1
5) Adding a thin layer of cement mortar at surface of concrete is called------
1) Rodding 2) Knocking 3) Rendering 4)Blooming
6) Aggregates having size more than -------mm is called cyclopean.
1) 4.75 2)2.36 3)75 4)1.18
7) which of the following bougs compound is responsible for Early strength in cement
1)C3S 2)C2S 3)C3A 4)C4AF
8) Blains Air permeability test is used for determining
1)Fineness 2)Soundness 3) Rupture 4)Consistancy
9)Super sulphated cement will have sp. surface area about------cm2/gm
1)2250 2)2350 3)3500 4)4000
Telegram id - i.me/bombaytutorials
BOMBAY TUTORIAL
FAST TRACK WEEKEND BATCHES FOR COMPETITIVE CIVIL
ENGINEERING GOVT. EXAM
Address - Vijaydeep Building,Near mangala school,
Thane(E), Mumbai (9029621228) Total Marks - 75
10)Min Tensile strenght of a Cement Mortar after 3 days -----N/mm2
1)7.5 2)5 3)2 4)11.5
11) Angularity no of aggregate varies --------
1)0-25 2)0-11 3)0-3 4)0.75-1.25
12) Fineness modulus of a fine sand will have value ------
1)2.9-3.2 2)2.6-2.9 3)3.2-3.6 4)2.2-2.6
13) Fineness modulus of a coarse sand will have value ------
1)2.9-3.2 2)2.6-2.9 3)3.2-3.6 4)2.2-2.6
14) Factor of safety for steel is based on its --------
1) Yield stress 2) Ultimate stress 3) Both 4) None
15)Period of mixing in case of machine mixing of Concrete is kept---mins
1) 2 2)5 3)4 4)3
16) Min grade of con. to be used in case of Severe atmospheric conditions is
1)M15 2)M-20 3)M-30 4)M-40
17) In case of SSD height of object is assumed to be-------m
1)1.2 2)0.75 3)0.15 4)2.44
18) Concept of Expressway was introduced in which plan......
1)Lucknow 2) Nagpur 3)Bombay 4)Vision
19)Std width of a passenger vehicle is assumed to be----m
1)2.5 2)2.44 3)3.5 4)2.85
Telegram id - i.me/bombaytutorials
BOMBAY TUTORIAL
FAST TRACK WEEKEND BATCHES FOR COMPETITIVE CIVIL
ENGINEERING GOVT. EXAM
Address - Vijaydeep Building,Near mangala school,
Thane(E), Mumbai (9029621228) Total Marks - 75
20) For complex situations total reaction time of a driver varies ---sec
1)0.5 2)3-4 3)2-5 4)1-3
21) PIEV theory is associated with ---------study.
1)Accident 2)Traffic 3)Both 4)None
22) Speed limit is --------type of Road sign.
1)Regulatory 2)Informatory 3)None 4) Warning
23) Water absorption of a road aggregate should be less than ------%
1) 0.6 2)1.5 3)0.2 4)3
24) In hot climatic condition ------ grade of bitumen is used.
1)20/40 2)30/40 3)80/100 4)50/60
25) Flash point for a bitumen to be used in road construction--------*C
1)150 2)175 3)199 4)100
26) Staff intercept will be minimum, when its held -------
1)Normal 2) Away from Normal 3)Both 4) None
27)which of following is accurate for direct chaining-----
1)Taping 2)chaining 3) Tacheometry 4) none
28) Amslar Planimeter is used for measuring --------
1)Area 2)Volume 3)Elevation 4)Contour
Telegram id - i.me/bombaytutorials
BOMBAY TUTORIAL
FAST TRACK WEEKEND BATCHES FOR COMPETITIVE CIVIL
ENGINEERING GOVT. EXAM
Address - Vijaydeep Building,Near mangala school,
Thane(E), Mumbai (9029621228) Total Marks - 75
29) RL of soffit is 103.55m and inverted sofit reading comes to 1.55. If the
reading on floor comes to 2m then RL of floor comes to-------m?
1)107.1 2)100 3)102 4)none
30) The BS reading on BM of RL 500m is 2.685m. If FS on a point is 1.345m,
then RL of that point is -----
1)502.585 2)501.445 3)502.785 4)501.340
31)A telescope is said to be normal when ------.
1) Bubble up, Face Left 2) Bubble down, Face right
32) Principle of a plane table surveying is ------
1) Trignometry 2) parallelism 3)Triangulatio 4) None
33) If scale is 1cm=10m then RF is -----?
1)1/10 2)1/100 3)1/10000 4)1/1000
34) A Back sight reading on B.M. = 200m, was 2.250m. The inverted staff
reading on the bottom of the beam was 1.450m. The R.L. of bottom of beam
is?
1) 200.800m 2) 201.450m 3) 201.000m 4) 203.700m
35) What is the magnetic declination at a place if the magnetic bearing of the
sun at noon place is 1860?
1) 60W 2) 60E 3) 00W 4)00E
Telegram id - i.me/bombaytutorials
BOMBAY TUTORIAL
FAST TRACK WEEKEND BATCHES FOR COMPETITIVE CIVIL
ENGINEERING GOVT. EXAM
Address - Vijaydeep Building,Near mangala school,
Thane(E), Mumbai (9029621228) Total Marks - 75
36) If whole circle bearing of a line is 120°, its reduced bearing is
1) S 20° E 2) S 60° E 3) N 120° E 4) N 60° E
37) In a closed traverse the sum of measured exterior angle should be?
1) (2n – 4) x 900 2) (2n + 4) x 900 3) 360 4) (2n – 4) x 1800
38)
Profile levelling is usually done for determining
1) contours of an area
2) capacity of a reservoir
3) elevations along a straight line
4) boundaries of property
39) The surface of zero elevation around the earth, which is slightly
irregular and curved, is known as
1) mean sea level 3) level surface
2) geoid surface 4) horizontal surface.
40) The bearing of AB is 190° and that of CB is 260°30'.The included
angle ABC,
1) 80° 30' 2) 99° 30' 3) 70° 30' 4) none of these
Telegram id - i.me/bombaytutorials
BOMBAY TUTORIAL
FAST TRACK WEEKEND BATCHES FOR COMPETITIVE CIVIL
ENGINEERING GOVT. EXAM
Address - Vijaydeep Building,Near mangala school,
Thane(E), Mumbai (9029621228) Total Marks - 75
41) Unit of measuring skirting is --------?
1) m2 2)m3 3)rm 4)nos
42) The order of booking dimensions is
1)LBH 2)LHB 3)HLB 4)none
43)The area is measured correct to nearest ------m2
1) 0.001 2)0.1 3)0.01 4)1
44) Floor area includes balcony area upto ------%
1)25 2)50 3)75 4)90
45) The volume is measured correct to nearest ------m2
1) 0.001 2)0.1 3)0.01 4)1
46) Soil particles arranged Face to Face orientatioin are called----structure.
1)Dispersed 2)Matrix 3)Honeycombed 4)Floculent
47)If Cu= 9 and Cc= 1 then D30/D10 =?
1)4 2)3 3)2 4)1
48)In case of a plate load test, when rate of settlement is less than -----mm/hr
we stop the test.
1)0.50 2)0.25 3)1.5 4)5
49) Maximum settlement should be limited to -----mm in case of raft
foundation on sand?
1) 40-65 2)25-50 3)65-100 4)80-120
Telegram id - i.me/bombaytutorials
BOMBAY TUTORIAL
FAST TRACK WEEKEND BATCHES FOR COMPETITIVE CIVIL
ENGINEERING GOVT. EXAM
Address - Vijaydeep Building,Near mangala school,
Thane(E), Mumbai (9029621228) Total Marks - 75
50)In case of footing if B=D then its called-----footing?
1)Shallow 2)Deep 3)Both 4)None
51) Abutements of bridge are designed for------earth pressure.
1)Active 2)passive 3)rest 4)Both
52)Compactive effort in modified proctors test is ---- times more than
standard prctors test.
1)4-5 2)2-3 3)1-3 4)10-12
53)Falling head method of permeability is suitable for---- type of soil.
1)FGS 2)CGS 3)MS 4)All types of soil
54) Minimum size of a silt particle is -----mm
1)0.002 2)0.2 3).75 4)0.06
55)Pheratic line a earth dam is-----
1)Parabolic 2)Elliptical 3)circular 4)straight
56)Shear strength of cohesionless soil is depend upon------
1)Confining pressure 2)Dry density
3)Nature of loading 4)All
57)Sedimentation governed by Stokes law does not hold good for size less
than-----mm?
1)0.0002 2)0.2 3)0.002 4)0.75
Telegram id - i.me/bombaytutorials
BOMBAY TUTORIAL
FAST TRACK WEEKEND BATCHES FOR COMPETITIVE CIVIL
ENGINEERING GOVT. EXAM
Address - Vijaydeep Building,Near mangala school,
Thane(E), Mumbai (9029621228) Total Marks - 75
58)Angle of internal friction is least for?
1) Clay 2)Sand 3) Gravel 4) Rounded Agg
59)The process of providing new foundation below existing foundation
without hampering structure stability is called?
1)Under pinning 2)Under mining 3)Under linking 4)All the above.
60)According to USBR Cu for uniformly graded soil is ------ ?
1)0.1 2)0.002 3)1-3 4)1
61)Max area of tensile reinforcement in Beams shall not exceed----%?
1)4 2)1 3)0.30 4)0.15
62)What is the thumb rule for riser and tread dimension?
1)2R+T=60 2)2T+R=60 3)T+R=60 4)All the above
63)RCC column is treated as long column when slenderness ratio is more
1)50 2)40 3)200 4)145
64)Cantilever retaining wall are safe to be used for height upto?
1)6m 2)4m 3)10m 4)2m
65)Minimum headroom over staircase is -----m?
1)1.5m 2)2m 3)3.5m 4)2.1m
66)Minimum nos of steel bars to be provided in circular column ----
1)4 2)6 3)8 4)5
Telegram id - i.me/bombaytutorials
BOMBAY TUTORIAL
FAST TRACK WEEKEND BATCHES FOR COMPETITIVE CIVIL
ENGINEERING GOVT. EXAM
Address - Vijaydeep Building,Near mangala school,
Thane(E), Mumbai (9029621228) Total Marks - 75
67)Loss of stress with time at constant strain in steel is called-----
1)Relaxation 2) creep 3)Ductility 4) Shrinkage
68)Doubly reinforced Beam is recommended when ---- is restricted?
1)b 2)d 3)b&d 4)None
69)What is the value of minimum reinforcement in slab?
1)0.15 2)0.30 3).50 4)0.1
70)Most economical steel section used as a beam is ------section?
1)H 2)I 3)circular 4)Angles
71)For 18mm rivet min width of a lacing bar should be------?
1)45mm 2)50mm 3)60mm 4)55mm
72)Effective length of a battened column is increased by -----%
1)10 2)12 3)7 4)25
73)Max deflection in steel beam is limited to L/?
1)360 2)325 3)250 4)100
74)In case of web buckling the dispersion of load from bearing plate to N.A.
takes place at----?
1)30 2)60 3)45 4)10
Telegram id - i.me/bombaytutorials
BOMBAY TUTORIAL
FAST TRACK WEEKEND BATCHES FOR COMPETITIVE CIVIL
ENGINEERING GOVT. EXAM
Address - Vijaydeep Building,Near mangala school,
Thane(E), Mumbai (9029621228) Total Marks - 75
74)In case of web Crippling the dispersion of load from bearing plate to N.A.
takes place at----?
1)30 2)60 3)45 4)10
75) Max slenderness ratio for a tension member is ----?
1)180 2)350 3)350 4)400
Telegram id - i.me/bombaytutorials
