Section 3 - Driveline / Axle

Section 3A - Drive Shaft / Axle

Front
NOTE:
For fastener(s) with * (asterisk) below, refer to the
specified procedure in “Repair Instructions”.
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Drive shaft nut 200 20.4 147.5 icon
Intermediate support icon
55 5.6 40.5
bolt*
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Front Drive Shaft Components:Front
Fasteners Information
Rear
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Drive shaft flange nut 50 5.1 37.0 icon
Drive shaft nut 175 17.8 129.0 icon
Rear wheel hub icon
88 9.0 65.0
assembly bolt
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Rear Drive Shaft Components:Rear
Rear Wheel Hub Components:Rear
Fasteners Information
Section 3B - Differential
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Rear differential oil icon
23 2.3 17.0
level / filler plug icon
Rear differential oil icon
23 2.3 17.0
drain plug
Rear drive shaft flange icon
50 5.1 37.0
nut icon
Rear drive coupling icon
18 1.8 13.5
air temperature sensor
Rear differential icon
80 8.2 59.0
mounting arm bolt icon
Rear differential icon
mounting rear bracket 80 8.2 59.0
bolt
Bevel pinion nut 170.0 icon
230 – 23.5 –
–
340 34.7
251.0
Bevel gear bolt 78 8.0 57.5 icon
Differential cover bolt icon
23 2.3 17.0 icon
icon
Companion flange nut 110 11.2 81.5 icon
Rear drive coupling icon
23 2.3 17.0
case bolt
Rear differential front icon
50 5.1 37.0
mounting bolt
Rear differential front icon
50 5.1 37.0
mounting nut
Mass damper nut 23 2.3 17.0 icon
Mass damper bolt 23 2.3 17.0 icon
Rear differential rear icon
80 8.2 59.0
bracket bolt
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Rear Differential Components
Fasteners Information
Section 3C - Transfer
NOTE:
For fastener(s) with * (asterisk) below, refer to the
specified procedure in “Repair Instructions”.
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Transfer oil level / icon
23 2.3 17.0
filler plug icon
Transfer oil drain plug 23 2.3 17.0 icon
Transfer oil icon
12 1.2 9.0
temperature sensor
Transfer stiffener icon
55 5.6 40.5
bolt*
Transfer bolt 88 9.0 65.0 icon
Transfer nut 88 9.0 65.0 icon
Transfer output flange 100 – 10.2 – 74.0 – icon
nut 300 30.6 221.5
Oil pump outer cover icon
8.0 0.82 6.0
bolt
Transfer case bolt icon
23 2.3 17.0
icon
Transfer output icon
55 5.6 40.5
retainer bolt
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Transfer Assembly Components
Fasteners Information
Section 3D - Propeller Shaft
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Propeller shaft bolt 33 3.4 24.5 icon
Center support bolt 50 5.1 37.0 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Propeller Shaft Construction
Fasteners Information