SCHOOL NAME

SCHOOL ADDRESS

TECHNOLOGY & LIVELIHOOD EDUCATION 6 -INDUSTRIAL ARTS

FIRST PERIODICAL TEST
S.Y. 2024-2025

NAME: _________________________________________ SCORE: ______________________

GRADE & SECTION: _____________________________ DATE: ________________________

MULTIPLE CHOICE
Direction: Read and understand the sentences carefully. Write the letter on the blank before each number.

________1. What is meant when a manufacturer enhances the finished product?

A. He is improving the appearance of the product.
B. He is beautifying the appearance of the product.
C. He is decorating the appearance of the product.
D. He is developing the appearance of the product.
________2. What do you call a rectangular wooden device with a carved part at the center where a metal
blade is inserted and is used for smoothening?
A. sandpaper B. hand plane C. chisel D. paint brush
________3. What method of enhancing a product is used when creating shades of light and dark patterns
that create illusions of space and distance?
A. sketching B. outlining C. shading D. carving
________4. Which of the following is not important for decorating products?
A. It improves the quality of the product. C. It can increase sales.
B. It can entice the customers to buy product D. It can bring more capital.
________5. What should be the first step in making a project?
A. Prepare the materials needed for making. C. Plan the project.
B. Work slowly but surely. D. Get a starting capital.
________6. Which is not used in enhancing a finished product?
A.paint B. coloring material C. varnish D. lubricating oil
________7. It is the process of whitening or removing the colour by sunlight exposure.
A. pyrography B. bleaching C. preserving D. dyeing
________8. A transparent finishing material that comes from gum, linseed oil, and resin.
A. Varnish B. Enamel C. Stains D. Paint
________9. Which is consiedered an art using fire or heat to decorate wood?
A. gilding B. inlaying C. pyrography D. hand carving
________10. It is the process of thinking about the activities required to achieve the desired goal.
A. Budgeting B. Planning C. Experimenting D. Organizing
________11. Which of the following is the effect of paint when you apply it to the finished product?

A. It gives the wood a shiny glow. C. It removes the rust on the product.

B. It beautifies wooden objects and makes D. It gives woodwork an antique appearance.

them easy clean.

________12. What should you do to attain the proper mixture of the paint?
A. Apply the first coating. C. Let the paint dry in open air.
B. Stir the paint. D. Apply a second coating.
________13. In what direction should you plane a wooden product?
A. In the direction of the grain of the wood.
B. Against the direction of the grain of the wood.
C. Perpendicular to the direction of the grain of the wood.
D. Diagonal to the direction of the grain of the wood.
________14. Which is not a process in enhancing a finished product?
A. Painting B. Varnishing C. Repairing D. Planning
________15. Which of the following is a safety practice while working?
A. Wear gloves and mask if needed. C. Start clean and end in mess.
B. Keep tools without cleaning them. D. Use whatever tool could be used.
________16. It is the list of raw materials and their description.
A. Materials B. Procedure C. Drawing D. Name of the project.
________17. These are the steps in making the project.
A. Drawing B. Materials C. Procedure D. Evaluation
________18. Why do we need to do sketching, outlining and shading before decorating finished product?
A. To have good quality products.
B. To create a product with a good design that can attract the consumers.
C. To identify the details of each design on the product that adds beauty init.
D. All of the answers are correct.
________19. It is the project to be done.
A. Objectives B. Drawing C. Name of the Project D. Evaluation
________20. What should you do if you get a lower grade on the project or work you made?
A. I will never make any project again.
B. I will cry and wish my project got a better score.
C. I will ask my mother to help me in making my project.
D. I will do it again and I will exert more effort to improve my project.
________21. What tool is used to drive or remove screws that fasten electrical wires or other electrical
accessories?
A. Screwdrivers B. Pliers C. Electric drill D. Wire stripper
________22. Which of the following are examples of pliers?
A. Cutter and long nose C. Screw and screwdrivers
B. Multi-tester and Wire stripper D. All of these
________23. What instrument is used to measure resistance, voltage and current that flows in a circuit?
A. Wires stripper B. Multi-tester C. Voltmeter D. Ammeter
________24. What do you call a small, innovativel device with a practical use?
A. equipment B. device C. gadget D. electronic
________25. Which is a safety precaution or practice when working with electricity?
A. Keep your hands moist when working.
B. Insert pieces of metal like coins inside a fuse box.
C. Keep the floor wet.
D. Report broken bulbs immediately to authority.
________26. Which refers to the proceeds from selling a product?
A. Capital B. Sales C. Income D. Expenses
________27. Which refers to the proceeds earned after the expenses for the productions and operations are
deducted?
A. Capital B. Sales C. Income D. Expenses
________28. Which expenses included in making a project?
A. Cost of materials and transportation C. Fuel and Loans
B. Labor and sales D. All of these
________29. The total expense in making a certain product is ₱150. If it is sold at ₱200, how much is the
interest profit that was gained?
A. 33% B. 50% C. 25% D. 133%
________30. In making a wooden product, the producer needed a total of ₱100 for the expenses. How much
should he sell the product if he wants to gain 25% profit?
A. ₱75 B. ₱125 C. ₱25 D. ₱150
________31. What process involves fixing or restoring something back in a good condition?
A. Repair B. Maintenance C. Constructing D. Checking
________32. What is done in order to sustain the upkeep of tools so they are in good working condition?
A. Repair B. Maintenance C. Constructing D. Checking
________33. What tool is used in repairing a leaking faucet?
A. Pliers B. Screw driver C. Pipe wrench D. Hammer
________34. Which of the following is not a safety practice when working?
A. Have the right tools and materials needed before starting to work.
B. Wear loose, comfortable clothing.
C. Work with dim light.
D. Inspect tools before using.
________35. “Prevention is better than cure”. Which of the statements explains this reminder when
working?
A. It is advised to work by practicing safety precautions.
B. It is more difficult to cure than to prevent accident when working.
C. It suggests that one should be prepared for possible accidents when working.
D. Prepare a first aid kit before starting to work.
________36. In making an extension cord, which of the following materials do you need?
A. Electric plugs B. Electric drill C. Multi-tester D. Power source
________37. What should you do with the wire before peeling it off?
A. Separate one end of the electrical wire. C. Insert the wire into the plug.
B. Loosen the screw of the plug. D. Tighten the screw to secure the wire.
________38. What should be the first step in making electrical gadgets?
A. Prepare the materials needed. C. Clean the area.
B. Seek for technical assistance. D. Test the project.
________39. Which part of extension cord is used to connect to the source of power?
A. Male plug B. Female plug C. Wire D..Screws
________40. What should you do after completing the extension cord that you made?
A. Do not try it. C. Let a technician check your work
B. Keep the materials that you used properly. D. Check if there are exposed wires
________41. What is the goal of the 3R’s program?
A. To reduce, reuse and recycle waste materials
B. To segregate the waste materials
C. To create waste materials into something useful
D. To lessen waste materials
________42. What do you call the process of planning, controlling and assessing the extent by which all
sorts of waste materials?
A. Reduce, Reuse and Recycle
B. Waste Management
C. Waste Segregation
D. Waste manipulation
________43. Why is it important to manage our waste materials?
 A. Because unmanaged waste causes diseases that leads to death.
B. Because it is a social responsibility to cooperate with the program.
C. Because cleanliness is next to godliness
D. Because increasing waste threatens our environment and everything that lives in it.
________44. Which of the following are recyclable materials?
A. Plastic and cans
B. Paper and bottles
C. Plastic, bottles and ice cream container
D. All of these
________45. Why should we reduce, reuse and recycle plastic materials?
A. Plastic and cans
B. Because it is the most abundant source of waste in the environment.
C. Because plastic wasted do not decompose
D. Because they are difficult to be reproduced.
________46. Which is not a principle of 5S?
A. Sort B. Standardize C. Sweep D. Sustain
________47. What type of waste materials includes concrete, wood and metal?
A. Construction and demolition waste C. Medical waste
B. Electronic waste D. Industrial Waste
________48. What waste material can be made into a fabric covered basket?
A. Plastics B. Wine bottles C. Papers/cardboard D. Plastic bottles
________49. What is the advocacy to lessen the waste in a workplace?
A. 3Rs Program B. Principle of 5S C. Waste Management D. Waste Segregation
________50. What is the most commonly used to package any kind of item in grocery stores and department
stores?
A. Plastics B. Wine bottles C. Papers/notebooks D. Plastic bottles

Goodluck!
 TABLE OF SPECIFICATION
TLE 6 – INDUSTRIAL ARTS
First Grading

COMPETENCIES Number Number ITEM PLACEMENT

of days of Items 60% 30% 10%
taught
R U Ap An Ev Cr
1-ENHANCING/DECORATING FINISHED PRODUCTS
1.1 Discusses the importance and methods of
enhancing/decorating bamboo, wood and metal
products
1.2 Demonstrates creativity and innovativeness in 5 5 2 1 1 1 1, 2, 3, 4, 5
enhancing/decorating bamboo, wood and metal
products
1.3 Conducts simple survey using technology and other
data gathering method to determine market trends, 4 5 1 1 1 1 1 6, 7, 8, 9, 10
costumer`s preference of products types etc.

1.4 Discusses the effects of innovative finishing materials

and creative accessories and designs on the
marketability of products 5 5 2 1 1 1 11, 12, 13, 14, 15
1.5 Enhances bamboo, wood, metal and other finished
product through sketching, shading and outlining
1.6 Construct Project Plan
*considers deliberate policies on sustainable
development in constructing te project plan 4 5 1 1 1 1 1 16, 17, 18, 19, 20
* demonstrates resourcefulness and management skills
in the use of time, materials, money and effort
1.7 Market Production
*applies creative packaging and labelling techniques 3 5 2 2 1 21, 22, 23, 24, 25
8computes income from sales
2-PRODUCTION/REPAIR OF SIMPLE ELECTRICAL
GADGETS
2.6 Construct simple electrical gadget
* identifies the materials and tools needed in making
simple electrical gadgets and their uses 5 5 1 2 1 1 26, 27, 28, 29, 30
*observes safety and health practices in making
gadgets

2.7 Explains the protocols (processes) in making electrical

gadgets 3 5 1 2 1 1 31, 32, 33, 34, 35

3-REPAIR OF SIMPLE
GADGETS/FURNITURES/FURNISHING AT HOME
AND SCHOOL
3.1 Gathers data on how to do simple repairs using
Technology
*repairs broken furniture (chairs, cabinets) 5 5 1 2 1 1 36, 37, 38, 39, 40
*assess repaired gadgets
* improves repair undertaken

4-RECYCLING OF WASTE MATERIALS

4.1 Discusses the Principle of 5`S
*sorting, strengthening, systematic cleaning,
standardizing, service 3 5 1 1 1 1 1
4.2 Identifies recyclable products/ waste materials made
of wood, metal, paper, plastic and others
4.3 Explains the process and the importance of recycling
4.4 Recycles the identified products/ materials into 3 5 1 1 1 1 1 46, 47, 48, 49, 50
functional items
TOTAL 40 50 10 10 10 8 7 5 50
 FIRST PERIODICAL EXAM IN TLE-INDUSTRIAL ARTS 6
KEY ANSWERS

1. A 11. B 21. A 31. A 41. A

2. B 12. B 22. A 32. B 42. B
3. C 13. A 23. B 33. C 43. A
4. D 14. C 24. C 34. C 44. D
5. C 15. A 25. D 35. C 45. B
6. D 16. A 26. C 36. A 46. C
7. B 17. C 27. B 37. A 47. A
8. A 18. D 28. D 38. A 48. C
9. C 19. C 29. C 39. A 49. D
10. B 20. D 30. B 40. B 50. A