Elastomer Products
Stand Protectors
Weatherford stand protectors help prevent damage to the pins
Advantages of Weatherford
of tubing and casing as these tubular goods are made up in
Stand Protectors
stands of doubles and triples.
— Prevention of damage to pins
The protectors provide a rugged solution to the weight imposed of stored tubing and casing.
on the pins and exposure of the tubulars to external damage
and contamination. At the same time, Weatherford stand — Protection of stored tubular
goods from exposure to
protectors offer flexibility and safety in handling and ease of
external damage and
storage. The quick air release close to the rim on the side of the contamination.
protectors, ensures a high degree of safety as stands are being
moved to the rig floor. — Enhanced safety of handling
tubing and casing.
Based on Weatherford Klepo inflatable technology, the
®
— Minimal maintenance.
protectors require minimal maintenance and have a long life
expectancy. Spare valves and tools are included, free of charge, — Long life expectancy.
with each shipment.
— Ease of use.
As an additional service, Weatherford offers stainless steel
offshore containers, complete with certified lift eyes, for
convenient storage of protectors by size. The client and
Weatherford determine dimensions, based on the client's need.
Inside Easy Liquid
view deflation tight
seal
Value-driven technology that’s Simply ProductiveSM
© 2005 Weatherford. All rights reserved. Brochure 611.01
Elastomer Products
Stand Protectors
Specifications Material Specification
Sizes
Stand protectors are commercially available in 3 1/2- Body Buffer
Test
through 20-in. sizes. These sizes are suitable for many (red) (black)
A
different pin profiles. Additional sizes are available on Hardness, shore 85 95 DIN 53505
request. In general, the 9 5/8-, 9 7/8-, 11 3/4-, 11 7/8-, Tensil strength, N/mm2 34 40.5 DIN 53504
13 3/8- and 13 5/8-in. sizes can use the same Abrasion resistance mm3 75 60 DIN 53516
protector for the various premium connection profiles. Compression set % 3.2 2.3 ASTM D 395A
(One protector is needed for each size.) ABB/Vetco
Testing
Gray threads will not fit in the standard stand
protectors. Weatherford tests materials and performance at
parameters that more than twice exceed those
expected in deepwater operations. Test reports on
Operation
inflation duration, load tests, off-center load tests,
— Inflate with rig air (+/-125 PSI, or 8.5 bar). Do not and load tests under temperature are available on
inflate protectors without tubulars inside. An air gun request.
attachment is included with the purchase of stand
protectors.
— Deflate by hand, as shown in the photo.
— Clean protectors with steam or hot water. Spray
WD-40®* or equivalent on the valve.
Temperature 149°F (65°C) Loads up to 44,000 lb (20,000 kg) Off-center testing
For more information, prices and delivery, contact Weatherford.
*WD-40 is a registered trademark of the WD-40 Company.
Elastomers – Main Office
Vlaardingen, The Netherlands
Phone: 31-10-445-1155
Value-driven technology that’s Simply ProductiveSM
Fax: 31-10-434-9311
email: elastomers@eu.weatherford.com
Weatherford products and services are subject to the Company’s standard terms
515 Post Oak Blvd. and conditions, available on request or at www.weatherford.com. For more
information contact an authorized Weatherford representative. Unless noted
Suite 600 Elastomers Service (US) otherwise, trademarks and service marks herein are the property of Weatherford.
Houston, Texas 77027 Houston, Texas, U.S.A. Specifications are subject to change without notice.
Phone: 713-693-4942
Tel: 713-693-4000 Fax: 713-693-4098
www.weatherford.com email: elastomers@weatherford.com
© 2005 Weatherford. All rights reserved. Brochure 611.01
