MINIMO

COLLECTION
60x120cm
60x60cm
 FLAKY

Surreal aesthetics &

diversity of narratives

Nature serves as the ultimate source of inspiration and

drawing cues from its ever-evolving elements we bring
you the Flaky and Solid Series. Inspired by the
furfuraceous terrains, patchy, dispersed, and solid one-
colored dunes stretching re and wide looking just the
same the series artfully blend natural inspiration and
modern aesthetics.

SOLID
FULLBODY Sizes
VITRIFIED TILES 60x120cm, 24"x48"
COLORBODY 60x60cm, 24"x24" FLAKY & SOLID
GLAZED VITRIFIED TILES SERIES

Surfaces
Matt, Glossy

Thickness
8.5mm

Timeless accessories for the

right amount of grandeur

THE FLAKY SERIES THE SOLID SERIES

Inspired by the scattered and grainy The Solid Series takes its inspiration from the
terrains the Flaky Series from Simpolo revives one-colored sand dunes crafting a
the classic ceramic design of salt and collection complimenting modern-day
pepper featuring a sprinkled dotted design design sensibilities of minimal design and
that stays timeless. solid colors taking the forefront.
 FLAKY SERIES (MATT, GLOSSY)

FLAKY BROWN FLAKY CREMA FLAKY WHITE

FLAKY BLACK FLAKY GREY

SOLID SERIES (MATT)

SOLID BLACK SOLID ASH SOLID DOVE SOLID WHITE

( COLORBODY ) ( COLORBODY )

SOLID BARLEY SOLID CREMA SOLID KOTA

The versatile, classic, and contemporary colors of

the collection best paired with exceptional features
LIQUID STAIN SCRATCH FIRE RESISTANT TO IMPACT FROST
are a sure-shot recipe for spaces elegant and
REPELLENT RESISTANT RESISTANT RESISTANT UV RAYS RESISTANT RESISTANT functional in equal measures.
5 COLORS

FLAKY BROWN

FLAKY CREMA

FLAKY WHITE

FLAKY GREY

FLAKY BLACK

FLAKY
SERIES

The classic Flaky Series features colors

and shades as classic as the design
itself. The colors ranging from shades of
beige and white take a dramatic turn
with black, brown, and grey offering a
wide palette for preferences.
Wall Flaky White Floor Flaky Brown
Size 60x120cm Size 60x60cm
Surface Glossy Surface Matt

FLAKY
SERIES 10\11
FLAKY
SERIES

Wall Flaky White Floor Flaky Brown

Size 60x120cm Size 60x60cm
Surface Glossy Surface Matt FLAKY BROWN FLAKY CREMA

Scan for Virtual Scan for Virtual

60x 60x Surface - Matt, Glossy

120cm 60cm Thickness - 8.5mm Fullbody Vitried Tiles

12\13
FLAKY
SERIES

Wall Flaky Black Floor Flaky White

Size 60x120cm Size 60x60cm
Surface Glossy Surface Glossy

14\15
FLAKY
SERIES

FLAKY WHITE FLAKY GREY FLAKY BLACK

Scan for Virtual Scan for Virtual Scan for Virtual

60x 60x Surface - Matt, Glossy 60x 60x Surface - Matt, Glossy
120cm 60cm 120cm 60cm
Thickness - 8.5mm Fullbody Vitried Tiles Thickness - 8.5mm Fullbody Vitried Tiles

16\17
7 COLORS

SOLID BARLEY

SOLID CREMA

SOLID WHITE
(COLORBODY)

SOLID DOVE

SOLID ASH

SOLID KOTA

SOLID BLACK
(COLORBODY) SOLID
SERIES

The palette of the Solid Series consists

of undertones, modern minimal colors,
and dark urban shades which go well
with a contemporary interior design
palette crafting voguish spaces in line
with current spatial trends.
 Wall Solid Barley Floor Solid Crema
Size 60x120cm Size 60x120cm
Surface Matt Surface Matt

SOLID
SERIES 20\21
 SOLID BARLEY SOLID CREMA

Scan for Virtual Scan for Virtual

Wall Solid Barley Floor Solid Crema

Size 60x120cm Size 60x120cm
Surface Matt Surface Matt

60x 60x Surface - Matt

120cm 60cm Thickness - 8.5mm Fullbody Vitried Tiles
SOLID
SERIES 22\23
SOLID
SERIES

Wall Solid Dove Floor Solid Ash

Size 60x120cm Size 60x120cm
Surface Matt Surface Matt

24\25
 SOLID DOVE SOLID ASH

Scan for Virtual Scan for Virtual

Wall Solid Dove Floor Solid Ash

Size 60x120cm Size 60x120cm
Surface Matt Surface Matt

60x 60x Surface - Matt

120cm 60cm Thickness - 8.5mm Fullbody Vitried Tiles
SOLID
SERIES 26\27
 SOLID KOTA

Scan for Virtual

Floor Solid Kota

Size 60x60cm
Surface Matt

60x 60x Surface - Matt

120cm 60cm Thickness - 8.5mm Fullbody Vitried Tiles
SOLID
SERIES 28\29
FULLBODY
VITRIFIED TILES
COLORBODY
GLAZED VITRIFIED TILES

SOLID WHITE SOLID BLACK

Scan for Virtual Scan for Virtual

Wall Solid Black Floor Solid White

Size 60x120cm Size 60x120cm
Surface Matt Surface Matt

60x 60x Surface - Matt

120cm 60cm Thickness - 8.5mm Colorbody Glazed Vitried Tiles
SOLID
SERIES 30\31
COMMONLY AFFECTED
STAINS GUIDANCE
For highly aggressive cleaning caused by some common food and substances, follow the table below.

SR. NANO TREATED SR. NANO TREATED

SUBSTANCES REGULAR SURFACE SUBSTANCES REGULAR SURFACE
NO. SURFACE NO. SURFACE

A. DOMESTIC AREA A. DOMESTIC AREA

1 GREEN VEGETABLE STAIN WET COTTON CLOTH MILD DETERGENT 1 PAINT WET COTTON CLOTH PAINT REMOVER/METHYLE ETHYL KETONE#/TOLUENE#
2 FRUIT STAIN WET COTTON CLOTH MILD DETERGENT 2 EPOXY/RESIN WET COTTON CLOTH TRICHLOROETHYLENE#/DICHLORO METHANE#
3 DAL-SAMBHAR WET COTTON CLOTH CITRIC ACID/NIMBU 3 GLUE WET COTTON CLOTH ACETONE#/TURPENTINE#
4 CURRY WET COTTON CLOTH CITRIC ACID/NIMBU 4 RUST WET COTTON CLOTH HYDROCHLORIC ACID
5 TOMATO SAUCE WET COTTON CLOTH CITRIC ACID/NIMBU 5 TAR WET COTTON CLOTH TRICHLOROETHYLENE#/METHYLE ETHYL KETONE#
6 SOYA SAUCE WET COTTON CLOTH MILD DETERGENT/CITRIC ACID/NIMBU 6 TYRE MARK WET COTTON CLOTH METHYLE ETHYL KETONE#
7 EDIBLE OIL WET COTTON CLOTH BAKING SODA/MILD DETERGENT/ACETONE#/TURPENTINE# 7 CEMENT WET COTTON CLOTH HYDROCHLORIC ACID
8 SINDUR OIL MIX WET COTTON CLOTH BAKING SODA/MILD DETERGENT/ACETONE#/TURPENTINE# 8 BLOOD WET COTTON CLOTH DILUTE NITRIC ACID
9 GHEE WET COTTON CLOTH BAKING SODA/MILD DETERGENT/ACETONE#/TURPENTINE# 9 GREASE WET COTTON CLOTH DETERGENT
10 COLD DRINKS WET COTTON CLOTH MILD DETERGENT/HOUSEHOLD CLEANER 10 MOBIL OIL WET COTTON CLOTH DETERGENT
11 TEA WET COTTON CLOTH MILD DETERGENT/HOUSEHOLD CLEANER/STRONG ALKALINE SOLUTION 11 METHYLNE BLUE WET COTTON CLOTH PHOSPHORIC ACID#/HYDROCHLORIC ACID
12 COFFEE WET COTTON CLOTH MILD DETERGENT/HOUSEHOLD CLEANER/STRONG ALKALINE SOLUTION 12 IODINE WET COTTON CLOTH HYDROCHLORIC ACID
13 WAX WET COTTON CLOTH PAINT REMOVER 13 RED AGENT WET COTTON CLOTH WET COTTON CLOTH
14 LEAD PENCIL WET COTTON CLOTH PLAIN WATER/HYDROCHLORIC ACID 14 GREEN AGENT WET COTTON CLOTH WET COTTON CLOTH
15 SKETCH PEN WET COTTON CLOTH HOUSEHOLD DETERGENT 15 POTASSIUM PARMANGANET WET COTTON CLOTH HYDROCHLORIC ACID
16 NORMAL COLOUR PENCIL WET COTTON CLOTH HOUSEHOLD DETERGENT 16 VARNISH WET COTTON CLOTH ACETONE#/TURPENTINE#
17 WAX PENCIL WET COTTON CLOTH PAINT REMOVER
18 WATER COLOUR WET COTTON CLOTH PLAIN WATER
19 MARKER WET COTTON CLOTH DILUTE SULPHURIC ACID#/TOLUENE#/XYLENE#
20 NAIL POLISH NAIL POLISH REMOVER NAIL POLISH REMOVER
21 SHOE POLISH LIQUID WET COTTON CLOTH HOUSEHOLD DETERGENT
22 CHERRY SHOE POLISH WET COTTON CLOTH WET COTTON CLOTH
SINTERING TECHNOLOGY
23 HAIR DYE DILUTE NITRIC ACID DILUTE NITRIC ACID
The latest Sintering Technology is capable of reaching very high temperatures of up to 1225°C
24 HAIR MEHENDI DILUTE HYDROCHLORIC ACID DILUTE HYDROCHLORIC ACID
and above. Therefore the technical characteristics of ceramics are strengthened and amplified.
25 LIPSTICKS WET COTTON CLOTH HYDROGEN PEROXIDE/HOUSEHOLD CLEANER
The resultant product has high strength with a certain amount of elastic flexibility.
26 BLUE INK WET COTTON CLOTH ACETONE#/TURPENTINE#/TRICHLOROETHYLENE#
27 BLACK INK WET COTTON CLOTH ACETONE#/TURPENTINE#/TRICHLOROETHYLENE#
28 HAND MEHENDI WET COTTON CLOTH DILUTE HYDROCHLORIC ACID
29 TURMERIC WET COTTON CLOTH MILD DETERGENT
30 GLUE WET COTTON CLOTH ACETONE#/TURPENTINE#
31 UJALA WET COTTON CLOTH ACETONE#/TURPENTINE#/TRICHLOROETHYLENE# IMPACT RESISTANCE
32 TOMATO KETCHUP WET COTTON CLOTH CITRIC ACID/NIMBU
33 OLIVE OIL WET COTTON CLOTH BAKING SODA/MILD DETERGENT/ACETONE#/TURPENTINE#
This material has incredible strength. The MOR is 40N/mm2 (granite is 13.8N/mm2),
34 MUSTARD OIL WET COTTON CLOTH BAKING SODA/MILD DETERGENT/ACETONE#/TURPENTINE#
breaking strength 2000N (at least 30% to 40% better than granite) and
impact resistance of 0.55.
B. HOTEL/FAST FOOD/CAFÉ HOUSE ETC

1 DAL WET COTTON CLOTH CITRIC ACID/NIMBU

2 CURRY WET COTTON CLOTH CITRIC ACID/NIMBU
3 TURMERIC WET COTTON CLOTH MILD DETERGENT ZERO WATER ABSORPTION (< 0.06%)
4 CHILLI WET COTTON CLOTH MILD DETERGENT
5 EDIBLE OIL WET COTTON CLOTH BAKING SODA/MILD DETERGENT/ACETONE#/TURPENTINE# The sintering at exceptionally high temperatures renders the product resistant
6 PICKLE WET COTTON CLOTH CITRIC ACID/NIMBU to scratching, staining and fading because of its near zero water absorption
7 TOMATO SAUCE WET COTTON CLOTH CITRIC ACID/NIMBU (> 0.06%) whereas in case of granite, it is 0.15%.
8 CHILLI SAUCE WET COTTON CLOTH BAKING SODA/MILD DETERGENT
9 SOYA SAUCE WET COTTON CLOTH MILD DETERGENT/CITRIC ACID/NIMBU
10 COLD DRINKS WET COTTON CLOTH MILD DETERGENT
11 FRUIT STAIN WET COTTON CLOTH MILD DETERGENT
12 WINE/ALCOHOL WET COTTON CLOTH MILD DETERGENT
STAIN RESISTANT
13 TEA WET COTTON CLOTH MILD DETERGENT/HOUSEHOLD CLEANER
14 COFFEE WET COTTON CLOTH MILD DETERGENT/HOUSEHOLD CLEANER Low porosity makes these sintered surfaces impervious to harsh chemicals like bleach,
15 ICE CREAM WET COTTON CLOTH MILD DETERGENT/HOUSEHOLD CLEANER hydrochloric acid and other cleaning agents. Sintered slabs are able to withstand
16 CIGARETTE END WET COTTON CLOTH HYDROCHLORIC ACID extreme heat and can be spray painted with no irreversible damage to the material.
INSTALLATION PROCESS
FOR SIMPOLO

HANDLING USE OF TILE LEVELLING SYSTEM DURING THE INSTALLATION

• To prevent breakage, we recommended to keep all Large • Minimum length of 1.2 m if the crates are handled resting
• For optimum surface performances, it is • This solution also acts as a spacer for joints,
Format Tiles in their original packaging during handling. on the long side.
strongly recommended to use a tile levelling system. thus contributing to make the installation more accurate.
• Tiles measuring 60x120cm or less can be handled by hand. • Minimum length of 2.1 m if the crates are handled resting
• To handle Large Format Tiles, we recommend to use lifting on the short side.
tools with a su cient load capacity. • It is recommended that you handle the Frame
• The use of forklift is recommended; however, it has to be individually.
equipped with following fork details:

CUTTING GROUTING
• When cutting Large Format Tiles, we recommend to use It is recommended to check the cutter blade before any • We recommend you to use grout with the same colour • You are advised to remove all excess grout from the tile
professional dry cutters. Using other tools may lead cut. A damaged blade increases the risk of damage. as the product. surface while the grout is still wet, working in diagonal
to uneven cuts or breakage of the material. • We recommend you to wait for the adhesive to movements. This applies in particular to tiles laid in
dry completely before grouting the joints. outdoor areas.
• We also advise you to ensure there is no adhesive or dust • Use a damp sponge and perfectly clean water to
in the joints. thoroughly clean the entire tiled surface and the joints.
• Apply the grout using rubber trowel. • We then recommend that you dry the surface with
• Both cement & epoxy grout can be used. It is not a damp cloth.
recommended to use grouting with coloured pigments in • Considering how quickly epoxy grouts set, if these are
BLACKROUND / BASE / SCREED contrast with colour of tiles. used, we recommend you to clean the excess grout
• Prepare a screed with a perfectly flat, dry, compact, hardness and mechanical resistance to • We recommend you to grout no more than 4-5 square immediately with a sponge and plenty of water.
dust-free surface, with no cracks or other visible stresses due to the final uses. It should be prepared using metres of tiling at a time. This applies in particular when • On the day after grouting, you should give the laid tiles
damage. The ideal height di erence should be no more perimeter bands & all structural expansion laying textured, non-slip and polished tiles. a second cleaning with alkaline detergents.
than 3 mm, measured using a 2 m spirit level. joints as necessary.
• In case of slightly cracked or non-solid screed, it is • It should be according to BS 8204-1-2003 or
recommended to use as crack preventing mat DIN 18560 standards.
between substrate & slab. Screed should have suitable

LAYING WITH ADHESIVES CLEANING AFTER LAYING

• We recommend laying with this technique, which should • It must be spread over in one direction only. Ideally it • Thorough initial cleaning is essential to ensure the tiles a • When you start washing, it is worthwhile soaking the tiled
be carried out by suitably qualified workers with should be spread towards shortest direction of long-lasting appearance over time. It should not be carried surface first of all, focusing in particular on the joints. The
appropriate equipment. the tile. out until at least 4 to 5 days after laying and grouting but acid solution must be left to work for no more than two
• While choosing the adhesive, we recommend you to bear • Spread the adhesive for one tile (pc) onto the floor no later than 10 days afterwards. minutes and must never be left to dry.
in mind the following: type of Large Format substrate using a 15mm U-notch or a 10mm V-notch • For washing, we advise you to use an acid-based product, • To remove the acid solution, one of the following methods
Tiles (group to which they belong and size), type of surface trowel and following the same direction as previously diluted according to the instructions provided by the should be used: single-brush machine equipped with a
to be tiled and intended use of room. applied to the back of the slab. Adhesive should manufacturer. However, we advise against the use of non-abrasive disc, a wet vacuum, or washing by hand. After
• Adhesive should be applied on the floor as well as on have 100% contact with tiles/substrate to avoid products containing hydrofluoric acid or derivatives removing the solution, we recommend you rinse the tiled
backside of tiles with 3-4 mm thickness. hollow sounding. thereof. surface thoroughly.
• To make corrections, we recommend you to check the • It is recommended to start from the centre of the slabs • It is a good idea to use a piece of unlaid tile, or a hidden • In the event that machines are used, we suggest that you
material before the adhesive dries. and then move towards the edges. part of the laid tiles, to check the resistance of the ceramic finish o the job by hand in the harder to reach spots, such
• Adhesive will vary depending on the surface so follow • Tap the slab with a rubber mallet for a complete fixing surface to the acid. This applies in particular when laying as the corners of the walls.
manufacturer recommendation. Cementitious ensuring the air is expelled. honed or polished tiles.
Adhesive (C2 Category - C2TES1) is recommended. • It is recommended to handle slabs with
• Apply the adhesive onto the back of the slab with a 3 mm appropriate equipment.
trowel and should be well distributed on
corners & edges.

JOINTS ORDINARY CLEANING AND CARE OF SURFACES

• Deciding where to position the joints is also a part of • A 2 mm joint spacer is suggested for all sizes. • For ordinary cleaning, simply wash with warm water and • To remove traces of grease or oil on the surfaces, we
the work which should be entrusted to qualified workers. • For Large Format Tiles, a 2 mm joint is strongly cloths and/or soft sponges. If necessary, neutral suggest you use detergents with organic or alkaline
• The joints must be positioned: recommended, as well as proper positioning of spacers on detergents can also be used. If you have non-neutral solvents (pH> 9), rinsing properly at the end.
• On structural connections (structural joints) floor sides. detergents, remember to test their e ects on a piece of an • In large areas, appropriate industrial washer-dryers can be
• Between the wall and the floor (perimeter joints) • With help of 2 mm spacer & thanks to a 0.8 caliber unlaid tile or on a hidden part of the tiled surface. used, taking care to finish o drying by hand where
• Between one tile and another (laying joints or gaps) (meaning that a 120x240cm minimal size actually • Abrasive cleaners should not be used on glossy and/or necessary.
• Between tiles and other materials (e.g. pairings between measures 1198x2398mm), di erent sized tiles can be used polished tiles; this kind of detergent can be used on tiles • Abrasive tools (such as metal pads or rigid brushes)
ceramic, linoleum, or wood). within a single floor pattern, while still achieving perfect with matt surfaces though: in the event, you should still should not be used on tiled surfaces.
laying. test the e ects on a piece of an unlaid tile or on a hidden • After installation of the floor, it should be properly
part of the tiled surface. covered with suitable material in order to prevent tiles
• We also advise against the use of soaps, waxes, or rinse from damage or scratches because of on-site processing.
aids. It is also important not to drag heavy objects across the
surface to avoid scratches.
TECHNICAL DETAIL
FLAKY & SOLID SERIES

STANDARD AS PER METHOD OF

STANDARD AS PER MEAN VALUE OF
CHARACTERISTIC ISO13006:2018/
IS 15622:2017 Gr.BIa TESTING SIMPOLO
EN14411 Gr.BIa

Regulatory Properties
Deviation in Length and Width ±0.30 % (±1.00 mm) ±0.10 % ISO 10545-2/IS 13630-1 ± 0.10 %
Deviation in Thickness ±5.0 % (± 0.50 mm) ±5.0 % ISO 10545-2/IS 13630-1 ± 5.0 %
Straightness in Side ±0.30 % (± 0.80 mm) ±0.10 % ISO 10545-2/IS 13630-1 ± 0.10 %
Rectangularity ±0.30 % (±1.50 mm) ±0.10% ISO 10545-2/IS 13630-1 ± 0.10 %
Surface Flatness Central Curvature ±0.40 % ( ± 1.80 mm) ±0.50 % ISO 10545-2/IS 13630-1 ± 0.20 %
Surface Flatness Edge Curvature ±0.40 % ( ± 1.80 mm) ±0.50 % ISO 10545-2/IS 13630-1 ± 0.20 %
Surface Flatness Warpage ±0.40 % (± 1.80 mm) ±0.50 % ISO 10545-2/IS 13630-1 ± 0.10 %
Surface Quality >95% defects free >95% defects free ISO 10545-2/IS 13630-1 >95% defects free
Small Color Difference ΔE <1.00 N.A. ISO 10545-16 ΔE <1.00
(For Plain Colour)
Glossiness ( Polished) As per Manufacturer As per Manufacturer Gloss Meter 60° ≥ 90
Glossiness (Matt) As per Manufacturer As per Manufacturer Gloss Meter 60° 3 ≤ Gloss Value ≤14
Glossiness (R Value)## As per Manufacturer As per Manufacturer Gloss Meter 60° ≤7
Structural Properties
Water Absorption ≤0.50 % ≤0.080 % ISO 10545-3/IS 13630-2 ≤0.080 %
Bulk Density As per Manufacturer Min 2.20 g/cc ISO 10545-3/IS 13630-2 > 2.28 gm/cc
Massive Mechanical Properties
Modulus of Rupture Min. 35.0 N/mm² Min. 35.0 N/mm² ISO 10545-4/IS 13630-6 Min. 37.0 N/mm²
(8.5 mm, 9 mm,10 mm)
Modulus of Rupture (12mm, 16mm) Min. 35.0 N/mm² Min. 35.0 N/mm² ISO 10545-4/IS 13630-6 Min. 40.0 N/mm²
Modulus of Rupture (20 mm) Min. 35.0 N/mm² Min. 35.0 N/mm² ISO 10545-4/IS 13630-6 Min. 42.0 N/mm²
Breaking Strength Thickness Min 1300.0 N Min 1300.0 N ISO 10545-4/IS 13630-6 Min 1500.0 N
≥7.5 mm(8.5mm,9mm,10 mm)
Breaking Strength Thickness Min 1300.0 N Min 1300.0 N ISO 10545-4/IS 13630-6 Min 1800.0 N
≥7.5 mm (12mm)
Breaking Strength Thickness Min 1300.0 N Min 1300.0 N ISO 10545-4/IS 13630-6 Min 6000.0 N
≥7.5 mm (16mm)
Breaking Strength Thickness Min 1300.0 N Min 1300.0 N ISO 10545-4/IS 13630-6 Min 8000.0 N
≥7.5 mm (20mm)
Surface Mechanical Properties
MOH’S Hardness # As per Manufacturer Min. 5 BS EN 15771/IS 13630-13 Polished Min 4**/Satin,Posh
& Matt Min 6
Surface Abrasion Resistance As per Manufacturer Min. Class II ISO 10545-7/IS 13630-11 Polished Min II**/Satin,Posh
(Glazed) # & Matt Min III
Deep Abrasion Resistance Max. 175 mm³ Max. 140 mm³ ISO 10545-6/IS 13630-12 Max 132 mm³
(Unglazed)#
Thermal Hygrometric Properties
Moisture Expansion Max 0.06% (0.6 mm/m) Max 0.02 mm/m ISO 10545-10/IS 13630-3 Max 0.02 mm/m
Thermal Expansion(COE) at 100°C As per Manufacturer Max. 6.0 x 10-6 ISO 10545-8/IS 13630-4 Max. 6.0 x 10-6
Thermal Shock Resistance Min 10 Cycle Min 10 Cycle ISO 10545-9/IS 13630-5 Min 10 Cycle
Impact Resistance(COR) # Min. 0.55 Min 0.55 ISO 10545-5/IS 13630-14 Min 0.55
Frost Resistance As per Manufacturer As per Manufacturer ISO 10545-12/IS 13630-10 Frost Proof
Crazing Resistance 4 Cycle 4 Cycle ISO 10545-11/IS 13630-9 6 Cycle
Chemical Properties
Resistance to Staining Glazed Min. Class 3 Min Class 1 ISO 10545-14/IS 13630-8 Min. Class 3/Min. Class 1
Resistance to Staining Unglazed As per Manufacturer Min Class 2 ISO 10545-14/IS 13630-8 Min. Class 4/ Min. Class 2
Resistance to Household Chemicals Min Class GB Min Class AA ISO 10545-13/IS 13630-8 Min Class GB/Min Class AA
& Swimming Pool Salts Glazed
Resistance to Household Chemicals Min Class UB As per Manufacturer ISO 10545-13/IS 13630-7 Min Class UB/Min Class A
& Swimming Pool Salts Unglazed
Resistance to Low Concentrate Acid As per Manufacturer As per Manufacturer ISO-10545-13/IS 13630-8 Min Class GLB***/
and Alkalis Glazed Min Class A***
Resistance to Low Concentrate Acid As per Manufacturer As per Manufacturer ISO-10545-13/IS 13630-7 Min Class ULB***/
and Alkalis Unglazed Min Class A***
Resistance to High Concentrate As per Manufacturer As per Manufacturer ISO-10545-13/IS 13630-7 Min Class GHB***/
Acid and Alkalis Glazed Min Class A***
Resistance to High Concentrate As per Manufacturer As per Manufacturer ISO-10545-13/IS 13630-7 Min Class UHB***/
Acid and Alkalis Unglazed Min Class A***
Safety Properties PACKING
Skid Resistance - As per Manufacturer As per Manufacturer BS 7976-2 Glossy ≥P0, Satin,
(DCOF-WET PENDULUM)## Posh ≥P1 Matt ≥P2 DETAIL
Slip Resistance -Satin/ Matt As per Manufacturer As per Manufacturer DIN 51130 R9 to R13
(DCOF- R Value )##
Lead and Cadmium release As per Manufacturer N.A. ISO-10545-15 Does not yield Pb &Cd PRODUCT SIZE ACTULE SIZE THICKNESS TILES / BOX COVERAGE AREA / BOX

* Whichever is Lower
** With nano technology (Polished Vitrified tiles) Depending on Application area (low or high intensity of trafic)
60x120cm 600x1200mm 8.5mm 3 pcs. 2.16 sq. mtr. 23.25 sq. ft.
*** Except Hydrofluoric Acid & it's compound Flaky & Solid
60x60cm 600x600mm 8.5mm 4 pcs. 1.44 sq. mtr. 15.50 sq. ft.
# Tiles Intended for use on floor
## For Floor tiles,as per customer requirement
Simpolo Vitrified Private Limited
Old Ghuntu Road, MORBI - 363 642. Gujarat, INDIA
Tele.: +91 2822 241622, E-mail: customercare@simpolo.net

MUMBAI
Simpolo Gallery, Unit No.: 203, 2nd Floor, Morya Land Mark 2, Link Road, Andheri (W), Mumbai - 400 053.
Tele.: +91 22 40167131, E-mail: mumbai@simpolo.net

AHMEDABAD
First Floor, 103, Sumel - 2, Near Gurudwara, S. G. Highway, Bodakdev, Ahmedabad - 380 054.
Tele.: +91 79 400 37222, +91 79 400 52220, E-mail: ahmedabad@simpolo.net

DELHI
H-139, First Floor, Sector-63, Noida - 201 301, Uttar Pradesh.
Mob.: +91 93103 90046, E-mail: delhi@simpolo.net

COCHIN
33/2380 A-A1 NH Bypass, Vysali Bus Stop, Chakkaraparambu, Cochin - 682 032.
Mob.: +91 93493 39938, Fax: +91 4844 037118, E-mail: cochin@simpolo.net

KOLKATA
5th Floor, DD-27, Salt Lake City, Sector 1, Near Salt Lake City Center, Kolkata - 700 064. (W.B.)
Mob.: +91 90733 53728, E-mail: kolkata@simpolo.net

www.simpolo.net | Toll Free No.: 1800-233-2223

07/'23

Mo.: +91 72289 22222