INKAS® SENTRY ARV

MAKE EVERY TACTICAL ENSURING

DECISION COUNT
The INKAS® Sentry ARV is a multipurpose vehicle designed
SUCCESSFUL
RECOVERY
to serve in extreme climate conditions. It is a unique ARV
in terms of technical specifications, design and assembly.

OPERATIONS
A truly innovative approach was taken when designing and
manufacturing this vehicle by making use of mission-tested
engineering solutions implemented within previous
INKAS® models. INKAS® SENTRY ARV
Slide Slope 26˚

Trench - 900 mm
BUILT FOR TOUGH
SITUATIONS
Gradient - 50º The Sentry ARV features a 12 ton retracted recovery boom with dual
in-line planetary winches complete with air free spool and ~46m of
11mm wire rope. The recovery boom at full extension reaches 1.8
meters past the tailboard when horizontal and can be elevated up to
41 degrees. The under lift provides up to 2 meters of reach with a lift
Step Height - 500 mm capacity of 3 tons extended and 4.1 tons retracted using the lift forks.
The tailboard of the ARV includes rear “D” rings, built in safety chain
pockets, recessed area for air and auxiliary light plug ins along with
optional multi-position hydraulic rear spades. The ARV has
spacious storage for field tools and attachments.

Fording - 1,500 mm
Capable of recovering other Light
Armored Vehicles (LAV) and Armored
Personnel Carriers (APC)*
*Depending on target vehicle weight and specifications.

• INDEPENDENT SUSPENSION

• INTEGRATED 12-TON BOOM

& WHEEL LIFT

• SPACIOUS TOOL COMPARTMENTS

• DUAL 6 TON WINCHES

FLEXIBLE,
ADVANCED
& HIGHLY
CUSTOMIZABLE
SOLUTIONS
BALLISTIC PROTECTION - UP TO

STANAG-4569
LEVEL II
HEAVY ARMORING COMBINED WITH
CUTTING EDGE TECHNOLOGY
The Sentry ARV can be equipped with dual protective layers ensuring its passengers’ safety from both ballistic as well as
blast attacks. The advanced armoring materials provide protection against 7.62x39 API BZ ammunition and are tested to meet
STANAG-4569 Level II. The blast protection level of the vehicle is tested to meet STANAG-4569 Level 2a, with up to 6 kg (explosive
mass) Blast AT mine explosion pressure activated under any wheel. The well-equipped ARV features perimeter armoring of the
passenger compartment, engine bay as well as key mechanical components. The vehicle is equipped with multi-layer ballistic glass and
INKAS® proprietary overlap system to protect from bullets penetrating the seams of doors into the cabin. Each armor plate is laboratory
tested and certified not only by INKAS® Armored Vehicle Manufacturing, but also by third party laboratories as required by law.
TECHNICAL SPECIFICATIONS
DIMENSIONS ENGINE
Length 7,000 mm Engine Type and Cylinders 6.7L 8-cyl Turbo Diesel
Width 2,306 mm Engine Output 330 hp @ 2,600 rpm
Height 2,600 mm Engine Torque 825 lb. ft. @ 2,000 rpm
Wheel Base 4,290 mm Power to Weight Ratio 35 hp/ton
Ground Clearance 350 mm Range per Fuel Tank 400 km
Seats 2 seats Electrical System 185A Extra Heavy Duty @ 24 V DC
Transmission 10-Speed Automatic
WEIGHT (ARMORED) *Based on BR6

Curb Weight 8,000 kg DRIVETRAIN

Payload Capacity 1,400 kg
Wheel Drive 4x4 with manual selector 4x2 (rear),
Combat Weight (GVW) 9,400 kg and 4x4 “HIGH” or 4x4 “LOW”
Transfer Case Borg Warner BW4406 or equivalent
PERFORMANCE
Differential Locks Driver controlled differential locks
Maximum Speed 120 km/h
Brakes Hydraulic discs (Front & Rear)
Gradient 50º
ABS brake system - 4W
Side Slope (Static) 26˚
Steering Hydraulic-powered
Turning Circle Diameter (Curb-to-Curb) 8,500 mm
Suspension Fully independent suspension
Turning Circle Diameter (Wall-to-Wall) 9,200 mm
with integrated CTIS
Approach Angle 37˚
Departure Angle 32˚
CHASSIS
Vertical Step Climbing 500 mm
Trench Crossing 900 mm Base Vehicle Ford® F550 heavy duty

Water Fording 1,500 mm

WHEEL SYSTEM
RECOVERY EQUIPMENT Run-Flat System All wheels; allow for minimum 50 km
travel @ 50km/h
Wrecker Type Boom, Winch (2pcs), Underlift
Winch Drive Hydraulic
PROTECTION
Towing Capacity 10,000 kg
Lifting Capacity 12,000 kg Ballistic Protection Up to STANAG-4569 Level II

Pulling Capacity 12 ton Blast Protection STANAG-4569 Level 2a

*Technical specifications may vary due to additional options, features and customizations.
W W W.INKA S A RM O RED .COM 3605 WESTON R D.
IN FO @INKA S .CA TOR ONTO, ONTAR IO
+ 1 ( 416) 645-8725 C ANADA M9L 1V7