Fais Puthelath
Mechanical Engineer – MMUP Approved
Reg No # 33735
+974-30519247
faisptlt@gmail.com
Total Experience: 05 Years
GCC Experience: 03+ Years
QUALIFICATIONS: Bachelors in Mechanical Engineering from APJ ABDUL KALAM
TECHNILOGICAL UNIVERSITY(KTU),kerala India
MEMBERSHIP: Ministry of Municipality, UPDA/MMUP Qatar - License No-33735
Nebosh Igc UK
CONSTRUCTION EXPERIENCE
• Nationality: Indian Infrastructure Projects
• Residency: Doha, Qatar Work Inspector -Drainage/Utilities, Roads
• Date of birth: 21 – Aug- 1997 Mechanical equipments
• Marital Status: Married
• QID: Transferable
• Driving License-Valid Qatar Driving License
OBJECTIVE:
To join a highly professional team in the field of Engineering in Order to groom my professional
abilities within a dynamic and progressive environment where Enthusiasm, dedication, and the
ability to manage tasks effectively are pre-requisite in driving the organization forward.
SKILLS:
• Education: Mechanical Engineering Degree with Certifications.
• Nebosh Igc UK
• Autocad 2021
• Knowledge of QCS 2014 and applicable construction codes and regulations.
• Good English, Hindi communication skills.
• Good command over MS Office (Word, Excel, PowerPoint), AutoCAD 2D, Primavera.
• Ability to work under pressure.
• Ability to work in a multicultural environment.
MECHANICAL ENGINEER FAIS PUTHELATH
CARER HIGHLIGHTS:
I am a Mechanical Engineer with total 5years of experience as mechanical engineer and 3+ years of
experience as Utilities& Road inspector in Doha- Qatar. I am involved in the construction of various
infrastructure projects including service utilities, roads, landscapes, water system pipelines, dry
utility diversion works and various vertical structures. Site supervision responsibilities including
reporting, conducting all Site inspections, Raising of NCR’s and making observations, following up
of Site Progress Well versed with the construction industry specifications and standards has
enabled me to manage contractor workforces on large projects ensuring work is performed safely
and in conformance with Project requirements. Also provides corrective recommendations and
worksite management solutions supporting the construction managers. I have coordinated with
clients, subcontractors, and Consultants to meet the Project objectives. I possess good competent
Knowledge of AutoCAD, MS Office, MS Word, Excel, and PowerPoint. Qualified Mechanical Engineer
with UPDA Certification, Registration Num-33735
WORK EXPERIENCE:
1.Dorsch consultants, Qatar-Work inspector-utilities
December 2021–Til date
▪ Responsible for all temporary and permanent work inspections like utility identification,
diversion, dewatering, deep excavation of shaft, surface & ground water network, treated
sewage effluent, Micro tunnelling works, substation& pumping station ,all dry and wet
utilities work.
▪ Assist the RE-Utilities in administering the operational functions of the day-to-day activities
on the project, with specific duties related to the work on the review and approval of the
micro-tunnelling & drainage design and shop drawings and handover coordination with
End user.
▪ Follow up and supervision of the stakeholder and authority approval that include
KAHRAMAA, ASHGHAL, QNBN, QAF, QRAIL and MOI SSD etc.
▪ Ensuring all technical aspects of the projects are strictly complied with and in conformity
with conditions of contract, specifications, general specifications, and contract drawings &
BOQ.
▪ Attend daily site visits and report to the contractor about issues concerning work execution
to fix them.
▪ Coordinate direct activities with the other discipline managers to maintain consistency and
integrity in the overall construction.
▪ Assist RE & ARE in reviewing all shop drawings, design proposal, method statements, any
requests for information relating to the micro-tunnelling and associated drainage/sewage
works.
▪ Letter drafting and assisting SRE & RE on technical matter construction issues.
2.HMT Machines Kalamassei,India- Mechanical engineer
September2019- 2021
▪ Pump Design: Develop designs for various types of pumps (centrifugal, positive
displacement), and CNC machines focusing on performance, efficiency, and reliability.
▪ Component Selection: Select appropriate materials and components to meet operational
MECHANICAL ENGINEER FAIS PUTHELATH
requirements and ensure durability.
• Quality Control: Implement and monitor quality control processes to ensure pumps meet
performance and safety standards.
• Troubleshooting: Address and resolve issues related to pump performance manufacturing
defects
PROJECT SUMMARY:
Dec 2021 to till date. Dorsch Qatar WLL
Position: Dorsch Qatar, Works Inspector-Utilities
Projects:
Roads and Infrastructure in South of Meshaf- Package 08
(QS049-P08)
Project ID: IA 2019 C 025 G
Contract No.: C/2020/129
Client: Ashghal-Qatar
Project Cost-500 million
(Project Description: The main scope of the project is to provide proposed Wet & dry utilities and to
interface with other packages to provide utilities connection to the existing and proposed plots,
including provision of Surface water drainage and foul sewer network by open cut and micro
tunnelling, treated sewage effluent network, potable water and electrical network interface with
other packages, proposed future ducts, Telecommunication networks, Road construction, street
lighting, Traffic signal and soft and hard landscapes. The project contains of Road Works includes
Embankment filling, Subgrade Works, Road base, CBM, Asphalt Base Course Class B and Wearing
Course Layers with CRMB and construction of Roundabouts. (Project Cost-500 million).
Responsibilities:
▪ Responsible for all temporary and permanent work inspection like utility identification
diversion, dewatering, deep excavation of shaft, surface & ground water network, treated
sewage effluent, Micro tunnelling works, all dry and wet utilities work.
▪ Assist the RE-Utilities in administering the operational functions of the day-to-day activities
on the project, with specific duties related to the work on the review and approval of the
micro-tunnelling & drainage design and shop drawings and handover coordination with
End user.
▪ Follow up and supervision of the stakeholder and authority approval that include
KAHRAMAA, ASHGHAL, QNBN, QAF, QRAIL and MOI SSD etc.
▪ Ensuring all technical aspects of the projects are strictly complied with and in conformity
with conditions of contract, specifications, general specifications, and contract drawings &
BOQ.
▪ Attend daily site visits and report to the contractor about issues concerning work execution
to fix them.
MECHANICAL ENGINEER FAIS PUTHELATH
▪ Coordinate direct activities with the other discipline managers to maintain consistency and
integrity in the overall construction.
▪ Assist RE & ARE in reviewing all shop drawings, design proposal, method statements, any
requests for information relating to the micro-tunnelling and associated drainage/sewage
works.
▪ Letter drafting and assisting SRE & RE on technical matter construction issues.
HMT Machine Tools Kalamasseri
Position: Mechanical Engineer
Duration:2019-2021
Projects: Design and Production of CNC machines and centrifugal pumps and compressors
Project ID: MTK/HRM/TC/PW-B-TECH
Responsibilities:
Procure and install advanced machinery for machining, assembling, and testing pumps and
compressors, including CNC machines, lathes, milling machines, and specialized test rigs.
Implement automation systems for improved efficiency and precision, including robotics, conveyor
systems, and advanced control software. Installing equipment for efficient material handling,
including forklifts, cranes, and automated storage systems.
Declaration:
I hereby declare that all the information furnished above is true to the best of my knowledge and
belief.
Place: Doha, Qatar
Fais Puthelath
MECHANICAL ENGINEER FAIS PUTHELATH
Ministry of Municipality ﻭﺯﺍﺭﺓ ﺍﻟﺒـــــﻠــــــــــﺪﻳــﺔ
Engineers & Engineering Offices
ﻟﺠﻨﺔ ﻗﺒﻮﻝ ﻭﺗﺼﻨﻴﻒ ﺍﻟﻤﻬﻨﺪﺳﻴﻦ
Accrediting & Classifying Committee
ﻭﻣﻜﺎﺗﺐ ﺍﻻﺳﺘﺸﺎﺭﺍﺕ ﺍﻟﻬﻨﺪﺳﻴﺔ
ﺷﻬﺎﺩﺓ ﻗﻴﺪ ﻣﻬﻨﺪﺱ
ENGINEER REGISTERATION CERTIFICATE
Based on Law No. (19) of 2005, as amended by Law No. ﻭﺍﻟﻤﻌﺪﻝ ﺑﺎﻟﻘﺎﻧﻮﻥ،2005 ( ﻟﺴﻨﺔ19) ﺍﺳﺘﻨﺎﺩﺍً ﺍﻟﻰ ﺍﻟﻘﺎﻧﻮﻥ ﺭﻗﻢ
(2) of 2014, and its implementing regulations by Ministerial ﻭﻻﺋﺤﺘﻪ ﺍﻟﺘﻨﻔﻴﺬﻳﺔ ﺑﺎﻟﻘﺮﺍﺭ ﺍﻟﻮﺯﺍﺭﻱ ﺭﻗﻢ،2014 ( ﻟﺴﻨﺔ2) ﺭﻗﻢ
Resolution No. (226) for the year 2016. .2016 ( ﻟﺴﻨﺔ226)
The committee decided, in Minutes No 49/2022 49/2022 ﻗﺮﺭﺕ ﺍﻟﻠﺠﻨﺔ ﺑﻤﺤﻀﺮ ﺭﻗﻢ
to grant a license to practice the profession to engineer: : ﻣﻨﺢ ﺗﺮﺧﻴﺺ ﻣﺰﺍﻭﻟﺔ ﺍﻟﻤﻬﻨﺔ ﻟﻠﻤﻬﻨﺪﺱ
ﻓﺎﻳﺲ ﺑﻮﺛﻠﺚ
Fais Puthelath Kunhabdulla Puthelath
Registration number: 33735 33735 : ﺭﻗﻢ ﺍﻟﻘﻴﺪ
Major : Mechanical Engineering ﻫﻨﺪﺳﺔ ﻣﻴﻜﺎﻧﻴﻜﻴﻪ: ﺍﻟﺘﺨﺼﺺ
Grade: TRAINEE ﻣﺘﺪﺭﺏ: ﺍﻟﻔﺌﺔ
Registration date: 22/12/2022 22/12/2022 : ﺗﺎﺭﻳﺦ ﺍﻟﻘﻴﺪ
Registration expiration date: 21/12/2025 21/12/2025 : ﺗﺎﺭﻳﺦ ﺇﻧﺘﻬﺎﺀ ﺍﻟﻘﻴﺪ
Employer: ﺩﻭﺭﺵ ﻗﻄﺮ ﺩﻭﺭﺵ ﻗﻄﺮ: ﺟﻬﺔ ﺍﻟﻌﻤﻞ ﺍﻟﺤﺎﻟﻴﺔ
ID number: 29735619929 29735619929 : ﺭﻗﻢ ﺍﻟﺒﻄﺎﻗﺔ ﺍﻟﺸﺨﺼﻴﺔ
Nationality: India ﺍﻟﻬﻨﺪ: ﺍﻟﺠﻨﺴﻴﺔ
Issue Date: 22/12/2022 22/12/2022 : ﺗﺎﺭﻳﺦ ﺍﻻﺻﺪﺍﺭ
. ﻳﻮﻣﺎً ﻣﻦ ﺗﺎﺭﻳﺦ ﺍﻧﺘﻬﺎﺋﻪ ﻭﻳﺘﺮﺗﺐ ﻋﻠﻰ ﻋﺪﻡ ﺍﻟﺘﺠﺪﻳﺪ ﺗﻄﺒﻴﻖ ﺍﻟﻐﺮﺍﻣﺎﺕ ﻭﺷﻄﺐ ﺍﻻﺳﻢ ﻣﻦ ﺍﻟﺴﺠﻞ30 ﻳﺠﺐ ﺗﺠﺪﻳﺪ ﺍﻟﻘﻴﺪ ﺧﻼﻝ، 2/2014 ( ﻣﻦ ﺍﻟﻘﺎﻧﻮﻥ ﺭﻗﻢ11) ﺍﺳﺘﻨﺎﺩﺍً ﻟﻠﻤﺎﺩﺓ ﺭﻗﻢ
www.mme.gov.qa :ﻟﻠﺘﺤﻘﻖ ﻣﻦ ﺻﻼﺣﻴﺔ ﺍﻟﺸﻬﺎﺩﺓ ﻳﺮﺟﻰ ﻣﺮﺍﺟﻌﺔ ﺍﻟﻤﻮﻗﻊ ﺍﻻﻟﻜﺘﺮﻭﻧﻲ
According to Article No. (11) of Law No 2/2014, the registration must be renewed within 30 days of its expiration date.
Non-renewal shall result in the application of fines and the cancellation of the name from the register. To verify the validity of
the certificate, please review the website: www.mme.gov.qa
