INSTALLATION
PREMIUM DRIVER AND PASSENGER FLOORBOARDS 4351
CUSTOMER SERVICE
877.370.3604 (toll free)
Fits: Most motorcycles – Mounting Components Sold Separately
- Installation on Metric Cruisers required model specific Splined Adapters. INSTALLATION QUESTIONS
- Installation in passenger location on H-D Softail models requires model techsupport@kuryakyn.com
specific Floorboard Mount Kit. or call 715.247.2983
- Installation on other H-D models in place of male mount footpegs
LIMITED WARRANTY
requires Non-Pivoting Male Mounts, P/N 8883.
Küryakyn warrants that any Küryakyn products
- When installed with Kuryakyn Retractable Passenger Pegs, P/N 4352, no sold hereunder, shall be free of defects in
additional adapters or mounting kits are required. materials and workmanship for a period of one
(1) year from the date of purchase by the
PARTS INCLUDED consumer excepting the following provisions:
2 Floorboard Assemblies ● Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt
2 5/16”-18 x 1" Socket Head Cap Screws showing the date the customer purchased the
2 Flat Washers product(s).
1 Installation Instructions
●The product must be properly installed,
maintained and operated under
Please read and understand entire instructions before starting installation. normal conditions.
●Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated
THANK YOU FOR CHOOSING KϋRYAKYN! products.
●Küryakyn shall not be liable for any
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR consequential and incidental damages, including
labor and paint, resulting from failure of a
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL Küryakyn product, failure to deliver, delay in
INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING delivery, delivery in nonconforming condition, or
for any breech of contract or duty between
THE USE AND CARE OF THIS PRODUCT. Küryakyn and a customer.
●Küryakyn products are often intended for use in
ATTENTION! This indication alerts you to the fact that ignoring the contents specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
described herein may negatively affect product performance and applications other than intended.
functionality.
●Küryakyn electrical products are warranted for
one (1) year from the date of purchase by the
TOOLS SUGGESTED consumer. L.E.D.’S contained in components of
Küryakyn products will be warranted for defects
Set of Hex Wrenches
in materials and workmanship for 3 years from
the date of purchase where as all other
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE components shall be warranted for one(1) year.
This includes, but is not limited to; control
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS. modules, wiring, chrome & other components.
●Küryakyn makes no warranty of any kind in
STEP 1 Read and understand all steps in the instructions before starting the regard to other manufacturer¹s products
distributed by Küryakyn. Küryakyn will pass on
installation. Park the motorcycle on a hard, level surface and turn off the all warranties made by the manufacturer and
ignition. where possible, will expedite the claim on behalf
of the customer, but ultimately, responsibility for
disposition of the warranty claim lies
with the manufacturer.
ABOUT OUR CATALOG
ATTENTION! A factory service manual may be helpful in performing this installation. For purchasing Küryakyn® products, you
Do not attempt to perform this installation if you are not confident in can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with
your ability to complete all steps in the procedure; consult a trained
your address to: Küryakyn, P.O. Box 339,
technician. Somerset, WI 54025.
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other
ATTENTION! Placing these floorboards on mounts intended for footpegs may Küryakyn® products, the motorcycle parts and
prohibit them from folding up in the same manner as the stock peg. accessories designed for riders by riders.
Also, if the board is positioned so it will fold up as stock, the trailing ©2005 Küryakyn USA® All Rights
end of the board may be in a position that could limit cornering reserved.
clearance.
-cont.-
4351-23MC-0511
ATTENTION! The floorboard may be rotated on the mount for a comfortable foot position, however,
some angles may cause the board to contact other components on the bike before the
board is folded up completely. Before installing, be aware of components on the bike
that may interfere with the placement of the floorboards.
NOTE: The floorboards can be used in either the driver or passenger footpeg positions; be sure there is
adequate clearance for the floorboards to fold up and that they do not interfere with the proper
operation of any other components.
PIC 1
STEP 2 Remove the stock footpegs; save the stock fasteners.
STEP 3 Install the splined adapters (sold separately) onto the footpeg
mounts using the stock hardware. Refer to the specific
instructions included with the splined adapters.
STEP 4 As shown in PIC 1, the Floorboards have 5 different mounting
positions. Test fit the Floorboard to the installed splined adapter
in each of the 5 positions, decide which position is the most
comfortable and provides necessary clearance for surrounding components.
NOTE: Make sure to test that the floorboard can be folded up and out of the way when installed.
STEP 5 Install the 5/16”-18 x 1" Socket Head Cap Screw, with a Flat Washer behind the head, and finger
tighten the Floorboard in place. The Floorboard can rotate to fine-tune the angle of the board for
best fit.
STEP 6 Once you are finished adjusting the Floorboard, tighten the fastener from Step 5 securely.
ATTENTION! It is the installer’s responsibility to ensure that all of the fasteners (including
pre-assembled) are tightened before operation of the motorcycle. Küryakyn will not
warranty components lost due to improper installation. Periodic maintenance may be
required.
PAGE
Ride On! 2
PREMIUM FLOORBOARDS INSTALLATION
