0% found this document useful (0 votes)
14 views2 pages

3M Water Filtration Products: ICE140-S/ICE145-S

The 3M™ Water Filtration Products ICE140-S and ICE145-S are single cartridge systems designed to improve the quality of water for commercial ice by reducing sediment, chlorine taste, odor, and scale. Both models have a capacity of 25,000 gallons and utilize advanced filtration technology to ensure better tasting ice and equipment protection. The systems feature easy cartridge change-outs and built-in scale inhibitors, complying with NSF and FDA standards.

Uploaded by

Amni Zalikha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
14 views2 pages

3M Water Filtration Products: ICE140-S/ICE145-S

The 3M™ Water Filtration Products ICE140-S and ICE145-S are single cartridge systems designed to improve the quality of water for commercial ice by reducing sediment, chlorine taste, odor, and scale. Both models have a capacity of 25,000 gallons and utilize advanced filtration technology to ensure better tasting ice and equipment protection. The systems feature easy cartridge change-outs and built-in scale inhibitors, complying with NSF and FDA standards.

Uploaded by

Amni Zalikha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

3M™ Water Filtration Products

SPEC# ICE140-S
models:
application:
ICE
QUANTITY 2
ICE140-S/ICE145-S
3M Purification Inc. Water Filtration Products Models ICE140-S and ICE145-S single car-
tridge water filtration systems help provide consistent high quality water for commercial
ice by reducing the effects of sediment, chlorine taste and odor and scale at flow rates
up to 2.1 gpm (7.9 lpm). Built-in scale inhibition reduces the ability of calcium and
magnesium to precipitate on the evaporator plates as hard scale.

• ICE140-S combines chlorine taste and odor reduction with cyst, bacteria1 and sedi-
ment reduction, while reducing the effects of chlorine corrosion and scale for up to
25,000 gallons (94,635 liters).

• ICE145-S combines chlorine taste and odor reduction with sediment reduction from
higher turbidity water, while reducing the effects of chlorine corrosion and scale for
up to 25,000 gallons (94,635 liters).

PRODUCT BENEFITS
• Effectively reduces sediment and chlorine taste and odor for better equipment protec-
tion and clearer, great tasting ice.
• Revolutionary Integrated Membrane Pre-Activated Carbon Technology (“IMPACT”)
dual-zone media cartridge construction combines a membrane in series with premium
activated carbon to provide superior throughput and cartridge life.
• Tested and verified by manufacturer’s laboratory to Standard 53 for cyst reduction
(HF40-S replacement cartridge).
• Built-in bacteria inhibitor intended to reduce fouling of media (HF40-S replacement
cartridge).
• NSF Standard 42 and/or FDA CFR-21 compliant materials.
• Reduction of up to 99.99% of common water-borne heterotrophic bacteria by mem-
brane filtration as tested by 3M Purification (HF40-S replacement cartridge).
• Patented valve-in-head design simultaneously shuts off and vents water, allowing for
simple and virtually trouble-free cartridge change-outs without the need to shut off the
upstream feed water.
• Built-in scale inhibitor reduces lime scale build-up on evaporator plates as tested by
3M Purification.
• Sanitary Quick Change (SQC) encapsulated cartridge design allows for fast and easy
cartridge change-outs with a 1/4 turn.
ENHANCED • 3/8” FNPT horizontal inlet and outlet ports allow direct or easily adaptable connections to
existing plumbing lines.

PRODUCT SPECIFICATIONS
Nominal
Model Part Reduction Service Replacement
Micron Capacity Application Sizing
Number Number Claims Flow Rate Cartridge
Rating
Cyst, Bacteria1, Most Low Flow Cubers to 1,000 lbs. (454 kg)
25,000 gallons 2.1 gpm HF40-S:
ICE140-S 56162-03 Sediment, Chlorine 0.22 Standard High Flow Cubers to 600 lbs. (272 kg)
(94,635 liters) (7.9 lpm) 56133-05
Taste and Odor, Scale2 Water Flakers to 1,800 lbs. (816 kg)
Higher Low Flow Cubers to 1,000 lbs. (454 kg)
Sediment, Chlorine 25,000 gallons 2.1 gpm HF45-S:
ICE145-S 56162-04 3.0 Turbidity High Flow Cubers to 600 lbs. (272 kg)
Taste and Odor, Scale2 (94,635 liters) (7.9 lpm) 56133-09
Water Flakers to 1,800 lbs. (816 kg)
1As tested with either E.Coli ATCC (11229) or Pseudomonas (B) diminuta ATCC (19146)
2Tested and verified by manufacturer’s laboratory
ICE140-S/ICE145-S 3M Purification Inc. Water Filtration
ICE140-S
SPEC#
QUANTITY 2 Products
MODEL NUMBER
PHYSICAL SPECIFICATIONS
PART NUMBER
• System includes a head assembly with integral mounting bracket, pressure gauge and
a single cartridge filter.
4 1/2"
(11.4 cm) • Inlet and outlet plumbing connections are 3/8” FNPT.
4" • System incorporates an internal automatic 1/4 turn shut-off valve.
(10.2 cm)
• Filter cartridges are o-ring seal type.
• System maximum operating pressure of 125 psi (862 kPa) and operating temperature
of 100°F (37.8°C).
• Recommended service flow rate is up to 2.1 gpm (7.9 lpm).
• Filter cartridges incorporate a bacteriostatic carbon block filtration medium (HF40-S
replacement cartridge) and scale inhibitor.
• System materials are NSF Standard 42 and/or FDA CFR-21 compliant.
• Cartridges are sanitary in design, requiring no contact with the filter media during
14 7/8" cartridge change-out.
(37.8 cm)
• Filter cartridges require no pre-activation.
• NSF Performance Data Sheet (PDS) is included.
• Shipping weight: 8.9 lbs. (4.0 kg) per case.
• Operating weight: 6 lbs. (2.7 kg) per case.
• Case quantity: 2.

IMPORTANT: INSTALLATION TIPS


These installation tips are for informational purposes only and are not intended to be
2 3/8" (6 cm) MIN RECOMMENDED
used as actual installation instructions. CAUTION: To reduce the risk associated with
FOR CARTRIDGE REMOVAL property damage due to water leakage:
• Read and follow Use Instructions before installation and use of this system.
• Installation and use MUST comply with all state and local plumbing codes.
• Protect from freezing, remove filter cartridge when temperatures are expected to drop
WARNING: To reduce the risk associated with the ingestion of below 40°F (4.4°C).
contaminants:
• Do not install on hot water supply lines. The maximum operating water temperature
• Do not use with water that is microbiologically unsafe or of
of this filter system is 100°F (37.8°C).
unknown quality without adequate disinfection before or after
the system. Systems certified for cyst reduction may be used on • Do not install if water pressure exceeds 125 psi (862 kPa). If your water pressure
disinfected water that may contain filterable cysts. EPA Establishment exceeds 80 psi (552 kPa), you must install a pressure limiting valve. Contact a plumbing
#070595-CT-001 professional if you are uncertain how to check your water pressure.
• Do not install where water hammer conditions may occur. If water hammer conditions
3M Purification Inc. recommends regularly scheduled maintenance and exist you must install a water hammer arrester. Contact a plumbing professional if you are
replacement of the filter cartridge(s) in order for the product to perform as uncertain how to check for this condition.
advertised/sold. 3M Purification shall not be liable for system failures due • The disposable filter cartridge MUST be replaced every 12 months, at the rated capacity
to improper maintenance. or if a noticeable reduction in flow rate occurs.

LIMITED WARRANTY
3M Purification Inc. warrants this Product will be free from defects in material and manufacture for five (5) years from the date of purchase: The filter cartridge or filter membrane is
warranted to be free from defects in material and manufacture for one (1) year. This warranty does not cover failures resulting from abuse, misuse, alteration or damage not caused by 3M
Purification Inc. or failure to follow installation and use instructions. No warranty is given as to the service life of any filter cartridge or membrane as it will vary with local water conditions
and water consumption. 3M PURIFICATION INC. MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR
CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE
OF TRADE. If the Product fails to satisfy this Limited Warranty during the warranty period, 3M Purification Inc. will replace the Product or refund your Product purchase price. This warranty
does not cover labor. The remedy stated in this paragraph is Customer’s sole remedy and 3M Purification Inc.’s exclusive obligation. For additional information, see the entire Limited
Warranty located in the product Installation and Operating Instruction Manual.
Limitation of Liability: 3M Purification Inc. will not be liable for any loss or damage arising from this 3M Purification Inc. product, whether direct, indirect, special, incidental, or c
onsequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Some states and countries do not allow the exclusion or limitation of inciden-
tal or consequential damages, so the above limitation or exclusion may not apply to you.

3M Purification Inc.
400 Research Parkway 3M is a trademark of 3M Company.
Meriden, CT 06450 U.S.A. NSF is a trademark of NSF International.
Toll Free: 1.800.243.6894 © 2011 3M Company. All rights reserved.
Worldwide: 203.237.5541 Visit www.nsf.org for the LITFS289 0811B
Fax: 203.630.4530 claims associated with 70-0201-9416-6
www.3Mpurification.com products that are NSF listed. Please recycle. Printed in U.S.A.

You might also like