D&B - 10KD

D&B - 10KD
D&B-10KD D&B-10KD
Dimensions & Weight Winch
OA length-transport m 5.2 Spool capacity 17m of 10mm cable
OA width m 1.8 Line pull ton 5
OA height-transport m 2.7
Hydraulic out rigger jacks Four hydraulic out riggers are fitted to the oute
OA height-mast up m 5.8
Drill pipe breakout
Weight ton 5
Torque break - out ton 4
Engine
Self - loading
Model(Diesel engine) Hyundai D4DD
Ground clearance mm 1300
Injection type Indirect injection
Width mm 3000
Rated output HP/RPM 98/2300
Fuel tank capacity ℓ 140 Light & Electrical system
Fuel consumption g/kwh 154 Mast watt 2-60

Cooling system Water cooling Control panel 2-gauge floodlight

Rotary Head Work watt 2-60

Model HJG800 Drill pipe

Reduction ratio 4.35 : 1 Max. length m 3
1st RPM/Torque rev/min,kg.m 0~700/420 Max. length(option) m
2nd RPM/Torque rev/min,kg.m 0~1100/180 OPTION
Feed System Mud pump
Top head driven by hydraulic cylinders
JDMP 300 l/min 300
throught heavy duty chain.
Water injection pump
Type/model Hyd. Cylinder
(High pressure washing pump) l/min,bar 100/35
Travels Cylinder mm 55x90x3250
Head travel m 3.8 Welder
Retract capacity ton 10 High motor drive DC 220A

Push down capacity ton 5 H d Hammer

SPT li d ift
Working Table Type Automatic

Max. casing diameter mm 220

Hydraulic System
System 3Pump Open loop system Drilling Perfomance
Hydraulic oil tank capacity ℓ 120 Tricon drilling
Filteration micron 10
DTH drilling
Pump model K3V63x2+35D
HQ drilling(88.9mm) m 200
Cooling system Air cooling
NQ drilling(69.9mm) m 500
Operating condition at job site 30°~+45° 30°~+45°
BQ drilling(55.6mm) m 750
Operating pressure kgf/㎠ 250
Notice
Crawler Base
1. Above drilling depth will be changed by job-site & working condition.
Crawler type LG4500
2. All specifiation can be changed without any notice.
Crawler speed km/h 2.5
Ground pressure kgf/㎠ 0.6
Ground clearance mm 455
SPT Hammer 3-web track shose mm 455

Hydraulic clamping
Clamp.Max.Diameter mm 220
Automatic Hammer Clamping size(Max) mm 220
Clamping size(Min) mm 76
NX Size