HS-100 Accelerometer

AC acceleration output via 2 Pin MS Connector

Key Features Connection Details

• Most common seller

Pin A Pin B
• For use with data collector +ve Power 0V
• Customisable features (White) (Black)

ø22mm
57mm
Industries
Building services, Pulp and Paper, 43mm
Mining, Metals, Utilities, Automotive, 22mm A/F

Water, Pharmaceutical, Wind

Technical Performance Mechanical

Mounted Base Resonance see ‘How To Order’ table (nominal) Case Material Stainless Steel
Sensitivity see: ‘How To Order’ table ±10% Sensing Element/Construction PZT/Compression
Nominal 80Hz at 22°C Mounting Torque 8Nm
Frequency Response 2Hz (120cpm) to 10kHz (600kcpm) ± 5% Weight 106gms (nominal) body only
1.5Hz (90cpm) to 12kHz (720kcpm) ± 10% Screened Cable Assembly see: www.hansfordsensors.com for options
0.8Hz (48cpm) to 15kHz (900kcpm) ± 3dB Connector HS-AA004 - non-booted
Isolation Base isolated HS-AA053 or HS-AA054 - booted
Range see: ‘How To Order’ table Mounting Threads see: ‘How To Order’ table
Transverse Sensitivity Less than 5%

Electrical Environmental
Excitation Voltage: 18-30Volts DC Operating Temperature Range -55 to 140ºC
Electrical Noise 0.1mg max Sealing IP68
Current Range 0.5mA to 8mA Maximum Shock 5000g
Bias Voltage 10 - 12 Volts DC EMC EN61326-1:2013
Settling Time 2 seconds
Output Impedance 200 Ohms max.
Case Isolation >10 8 Ohms at 500 Volts

Typical Frequency Response (at 100mV/g) Applications

50%
40% Fans, Motors, Pumps, Compressors,
Sensitivity Change %

30%
20%
Centrifuges, Conveyors, Air Handlers,
10% Gearboxes, Rolls, Dryers, Presses,
0%
-10% Cooling, VAC, Spindles, Machine Tooling,
-20%
-30%
Process Equipment
-40% Vibration sensor should be firmly fixed to a flat surface
-50% (spot face surface may be needed to be produced and
0 1 10 100 1,000 10,000 cable anchored to sensor body.)
Frequency Hz

How To Order

Product Prefix Product Series

HS - Hansford Sensors 100 - Industrial Vibration Sensor

H S 1 0 0 X X X X X X X X

Extra Options (if required) Sensitivity Range Resonant Frequency Cable/Connector Mounting Threads
F - Filtered 010 - 10mV/g ±800g 34kHz (2,040kcpm) 01 - PUR 01 - ¼-28” UNF Female
I - Intrinsically Safe 030 - 30mV/g ±250g 33kHz (1,980kcpm) 02 - Braided 02 - ¼-28” UNF Male
L - 316L Stainless Steel 050 - 50mV/g ±160g 32kHz (1,920kcpm) 07 - Silicon 05 - Quick Fit Female
RT - Temperature Output PT100 100 - 100mV/g ±80g 30kHz (1,800kcpm) 08 - Flame Retardant 06 - M6 x 1mm Male
T - Temperature Output 250 - 250mV/g ±32g 28kHz (1,680kcpm) 50 - 2 Pin MS 08 - M8 x 1.25mm Male
Y - 5% tolerance on sensitivity 500 - 500mV/g ±16g 26kHz (1,560kcpm) 54 - M12 10 - M10 x 1.5mm Male

www.hansfordsensors.com
sales@hansfordsensors.com

We reserve the right to alter the specification of this product without prior notice

TS001.9