DISPLAY BOARD
FLAVORS DISPLAY BOARD
SHUTTER BOX
TRANSPERENT DISPLAY
SHUTTER GRILL
15 MM THK GLASS
GLASS DOOR
STAIRCASE
LOCKTITE RUBBER FOAM
HANDLE
SQUARE METAL HINGE
ROLLING SHUTTER BOX
GLASS DOOR HINGE
MODULAR CENTRE TABLE
MODULAR CENTRE TABLE LEGS
2'-0'
MADE MILD STEEL AND TOP WITH
TABLE TOP WITH LAMINATE COTING MARBLE COATED LAMINATE MIDDLE
SQUARE BOX IN MID
WITH CUSION COVERING AND
WOOD. TOP MARBLE LAMINATE
2'-5'
GALVANIZED STEEL LEGS FITED WITH HINGE WHICH IS
ACCESABLE
FRONT ELEVATION SIDE ELEVATION
PLAN WITH SEATING
3" MARBLE LAMINATE TABLE TOP
3" MARBLE LAMINATE TABLE TOP
2'-0"
CUSION COVERING
PLAN WOODEN BOX INSIDE CUSION
OPENABLE TOP
SHRAVANI SANDESH LATKE.
CLASS: TY IDRM ROLL NO: 60 VIEW
S.V.T COLLEGE OF HOME SCIENCE
KNOCK DOWN COFEE TABLE
25MM THK TOP PLYWOOD
15"
20MM BASE LEG PLYWOOD
2'
THIS TABLE MADE WITH THE TEAK
WOOD WITH SEPRATE PIECES
9"
VARNISH POLISH WHICH ARE JOINED TOGHETHER
WITH KNOCK DOWN .
FRONT ELEVATION SIDE ELEVATION
VARNISH IS USE FOR POLISH.
20MM THK PLYWOOD USED FOR
25MM THK TOP PLYWOOD LEGS.
25MM THK TOP PLYWOOD
1'-6" 20MM THK TOP PLYWOOD
JOINT
PLAN
25MM THK BASE PLYWOOD
LEG DETAIL
KNOW DOWN DETAIL 1 KNOW DOWN DETAIL 2
SHRAVANI SANDESH LATKE.
CLASS: TY IDRM ROLL NO: 60 VIEW
S.V.T COLLEGE OF HOME SCIENCE
FURNITURE WORKSHOP
KNOCKDOWN FURNITURE
MAKING PROCESS: INTRODUCTION:
PLANNING: (2D AUTOCAD, Knockdown furniture is a type of furniture designed to be easily assembled and disassembled, usually
without the need for tools, using interlocking parts or fasteners. It is flat-packed for convenient storage and
VIEWS) transport.A small knockdown furniture piece, likely a stool, small side table, or decorative stand, made from
plywood or laminated board. Let me break down its features and design elements:
1. Materials Used
Plywood Board:
Likely 12–18mm thick.
Plywood is chosen for its strength-to-weight ratio and dimensional stability.
The layered edges reveal the cross-grain lamination typical of plywood, making it more resistant to
warping.
Surface Finish:
Appears to have a veneer or wood stain on the exposed surfaces.
The finish is minimal, possibly DIY, with a slightly rough edge, suggesting it may be a prototype or
handmade unit.
2. Joinery and Assembly Method
DRAWING ON PLYWOOD: This furniture uses a knockdown slot-fitting technique:
Slot or Cross-Lap Joint:
Two vertical pieces are cut with halfway slots so they slide into each other to form a stable cross
(X).
This gives it torsional strength without any nails or screws.
Groove-Fit for Top and Bottom Panels:
The circular top and bottom may have grooves or slots where the X-support structure slides in.
Alternatively, they might be press-fit or friction-fit using CNC precision cuts.
Tool-Free Assembly:
No nails, screws, or adhesives.
Ideal for flat-pack packaging and shipping.
LASERCUTTING:
3. Dimensions (Estimated)
Given the proportion relative to the plastic water bottle in the background:
Height: ~30–40 cm
Diameter of Base/Top: ~25–30 cm
Panel Thickness: ~12–15 mm plywood
4. Manufacturing Process
This could be easily manufactured using:
CNC Router Cutting: For high precision slot joints.
RESEMBLANCE: Laser Cutting (for thinner MDF versions).
Manual Jigsaw or Bandsaw: For prototyping or one-offs.
Each part is designed to be cut from flat stock, making it ideal for bulk production and quick
assembly.
5. Design Considerations
Ergonomics: If used as a stool, the hourglass shape gives leg room and center weight distribution.
Strength: The intersecting planes distribute vertical loads well.
Storage: Can be disassembled into 4 flat pieces.
Aesthetics: Minimalist, modern, somewhat rustic due to visible wood layers.
FINAL PRODUCT: 6. Use Cases
Side stool
Plant stand
Bedside table
Exhibition piece
Temporary furniture for events or small apartments
Educational/demo model for teaching furniture design and assembly
Stability- Add non-slip rubber pads or felt fee
Group -Shravani Latke
Pradhi Pandya
TYBsC
FURNITURE WORKSHOP
