HPHTTM THREAD COMPOUND

HIGH TEMPERATURE. HIGH PRESSURE,

THREAD COMPOUND
DESCRIPTION
JET-LUBE HPHT™ THREAD COMPOUND has been
SERVICE RATING
specifically formulated to meet performance -30°F (-34°C) to 450°F (232°C)
requirements of proprietary, metal to metal seal, and OSPAR Commissions HOCNF
high interference connection designs utilizing high CLASSIFICATION “Yellow” rating for Norway
performance materials including “super” chrome and CLASSIFICATION “E” for United Kingdom & The
high-alloys steels. The formulation contains a small Netherlands
percentage of PTFE to aid high temperature sealing
properties. The particle size of the PTFE is controlled
to allow it to seal 8-round and buttress thread forms. PRODUCT CHARACTERISTICS
JET-LUBE HPHT™ THREAD COMPOUND’s Appearance Paste
advanced base grease is a carefully selected balance Color Dark Grey to Black
of synthetic oils with an advanced biodegradable Thickener Complex
grease thickener technology. The base grease Fluid Type Synthetic PAO and
provides excellent adhesion and stability yet Ester
biodegrades and is environmentally safe based upon Cone Penetrations, mm X 10-1 290 - 335
the Harmonised Offshore Chemical Notification (ASTM D-217)
Format (HOCNF) guidelines. The result is superior Specific Gravity 1.36 Typical
lubrication and ancillary sealing under high loads with Density (lb/gal) 11.34 Typical
galling resistance equivalent to heavy metal based Flash Point, °F (°C) >550 (288)
compounds in a metal free formulation. (ASTM D-92)
Dropping Point, °F (°C) > 550 (288)
JET-LUBE HPHT™ THREAD COMPOUND has a (ASTM D 2265)
friction factor equivalent to API MODIFIED. However Oil Separation Wt % 3.0 Maximum
there may be connection tupes with which a higher or (ASTM D 6184)
lower friction factor is incurred. The formulation has Copper Strip Corrosion IB
been successfully make and break tested on 25% (ASTM D 4048)
Chrome, 35% Nickel alloy steel. Salt Fog Resistance, Hours >2000 at 5% NaCl
(ASTM B 117) >750 at 20% NaCl
 Biodegradable Environmentally Safe, and 4-Ball, Weld Point, kgf 1000 Typical
Metal Free (ASMT D 2596)
 Low Volatility At Temperatures Up To 232°C EPA 1311-TCLP Non-detect
(450°F) Service Range, °F (°C)* -30 to 450 (-34 to
 Frictional Properties Equivalent To API 232)
MODIFIED Friction Factor** 1.0
 High Film Strength Protects Against Gailling Relative to API MODIFIED
 Ideal For High Chrome Or Nickel Connections *Depends on connection and application
 Sticks to Wet or Oily Threads ** The frictional properties can vary between premium
 Controlled Solid Package to Accommodate connections designs. Test the torque required for
Premium Mechanical Seals and 8-round proper engagement prior to running or consult the
Connection Design Requirements connection manufacture.
Environmental Rating:
APPLICATIONS UK CEFAS OCNS Group E

JET-LUBE HPHT™ THREAD COMPOUND is For package types and part

recommended for use on premium mechanical seals
and 8-round connections. For large clearance thread
numbers contact sales@jetlube.com.
seal connection designs JET-LUBE RUN-N-SEAL
ECF is recommended.
LIMITED WARRANTY
For warranty information please visit
http://www.jetlube.com/pdf/Jet-Lube_Warranty.pdf

www.jetlube.com • An ISO 9001 and 14001 registered company

Revised 3/2020 kc