095LMa160CQ45SHURE

101051036

86790383

101037824
101051034 101077317
Parts 11 / 2020
00
EN
 E MONTABERT HC 95 - 2020

PARTS TO CHANGE SERVICE KITS

Depending on applications

Every 400 percussion hours. 200h

400h
Every 800 percussion hours.
800h

Every 1600 percussion hours. 1600h

3200h
Every 3200 percussion hours.

Service Kits part number are dedicated

Long term, only if damaged.
to this configuration, please refer to
dedicated part manuals for other drifters.

CAUTION
If drifter settings are incorrect, wear parts can be damaged prematurely.

If the drifter is used with deflated accumulators, premature damage can be caused to all parts.

These inspection intervals can vary depending on ground conditions, use of drifter.......

101077317
- 3-
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020

095LMa160CQ45SHURE
1 2 3 4 5 6 7 8 9 10
2
11

16

1 7/8

14

9
12 / 13

3 9 / 10 10
17

4 5 6 7 8
5 15

101077317
- 4-
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020

80 Nm
Qty CPN Designation
59 ft.lb
80 Nm 250 Nm 90 130 100 10 4 86222882 UNF ¾”, Nut
59 ft.lb 184 ft.lb
20 1 101048647 Injection nozzle
10 140 including :
20A 1 101015592 Ring
180
20B 2 101034428 Pin
60 70 20C 1 101015576 Packing
50
20C 30 2 86726668 Lip seal
40 120
110 z 40 1 101020893 O’ring
z 50 1 86754918 O’ring
140 140 Nm z 60 2 101020892 O’ring
170
103 ft.lb z 70 1 101020894 O’ring
80 3 86223930 Lip seal

30 150 90 1 101015632 Front guide

z 100 1 86746542 O’ring
20A 160
30 80 z 110 1 86770286 O’ring
152 Nm
80 120 1 101015636 Pin
112 ft.lb sp - D
80
130 1 101015621 Plug
20 10 z 140 2 86231321 O’ring
20B 250 Nm 150 1 101046062 Flange
184 ft.lb
160 3 95317335 Screw
170 1 86296084 Adapter
PARTS TO CHANGE
Depending on applications 180 1 101048546 Threaded plug
Every 400 hours.

CQ45SH Every 800 hours.

Every 1600 hours.
Every 3200 hours.
sp- D 1 101051034 Seals package
(All parts marked z

Long term, only if damaged.

101077317
- 5-
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020

Qty CPN Designation

210
190 1 101015600 RP Body
340
Y 200 1 86795168 Seal
240 330 Y 210 2 86754611 O’ring
Y 220 1 86752466 O’ring
438 Nm
322 ft.lb Y 230 1 86222791 O’ring
230 350 Y 240 1 101024926 O’ring
220 250 1 101015636 Pin

310 260 1 101015620 Filter

270 1 101015617 Valve
Y 280 1 86284205 O’ring
190 320 Y 290 1 86691490 O’ring
Y 300 1 86221702 O’ring
310 1 86748035 RP Retainer socket
200
320 1 86748019 RP Liner

sp - B Y 330 3 86754918 O’ring

250 Y 340 1 100999360 Seal
350 4 101015616 UNF ¾” , Stud
260
80 Nm
59 ft.lb sp- B 1 101051036 Seals package
PARTS TO CHANGE including :
Depending on applications
300 (All parts marked Y

RP H
Every 400 hours.
290
280 Every 800 hours.
270 Every 1600 hours.
80 Nm Every 3200 hours.
59 ft.lb Long term, only if damaged.

101077317
- 6-
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020

100 Nm
Qty CPN Designation
74 ft.lb
20 10 1 86746419 Main body incl. :
50 +
10a 4 86264678 ( Thread UNF 3/4”
10b 6 86249067 ( Thread UNF 5/8”
40 10c 26 86269115 ( Thread UNF 1/2”
10c x14 20 14 86751401 UNF ½”, socket
37 Nm head screw
27.2 ft.lb 30 1 86746492 Cover

50a 50b 30 D 40 1 86795721 O’ring

50 2 86753852 Diaphragm kit incl.:
10a
50a 2 86580966 ( Plug
10b 50b 2 86600632 ( Inflate valve
110
100 60 1 86746450 Front bearing
80
90 D 70 1 86746542 O’ring
90b 80 2 86503562 Needle bearing
90a
90 1 86746443 Pre- equipped
80 gear drive incl. :
60 90a 1 86746427 ( Splined nut
70 90b 1 86746435 ( Driven gear
D 100 1 86746534 Centering tool
D 110 1 86675998 O’ring
PARTS TO CHANGE
Depending on applications

095
Every 400 hours.
Every 800 hours.
Every 1600 hours.
Every 3200 hours.
Long term, only if damaged.

101077317
- 7-
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020

525 Nm Qty CPN Designation

250
386.6 ft.lb
120 1 86746484 Cover
10c x12 D 130 1 86668993 O’ring
140 1 86746559 Needle bearing
150 1 86746468 Hub motor gear
270
60 Nm 160 1 86746476 Gear
180
44 ft.lb
170 1 86746567 Needle bearing
180 1 86386505 Plug
190 1 86746518 Pin adapter
170
200 1 86746500 Ring
D 210 1 86222858 O’ring
240 D 220 1 86309424 O’ring
260
230 1 86613437 Adapter
230
240 1 86247723 Plug
210 50 Nm
280 36.8 ft.lb 250 4 86748753 UNF ¾”, socket
200 head screw
220
80 Nm 260 1 86758208 Hose
160 190
59 ft.lb 270 2 86758398 Plug
150
140 280 2 86748720 Ring
120
130 PARTS TO CHANGE sp- A 1 101037824 Seals package
Depending on applications including :

095
sp - A (All parts marked D
Every 400 hours.
Every 800 hours.
Every 1600 hours.
Every 3200 hours.
Long term, only if damaged.

101077317
- 8-
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020

Qty CPN Designation

119 Nm
87.6 ft.lb
10 1 86748589 Hyd. motor
20
20 4 96716949 M12, Socket
head. screw
D 30 1 86235454 O’ring
10
40 1 86790912 Seal
D 50 1 100996418 Lip seal

50
30 sp- A 1 101037824 Seals package
including :
40 (All parts marked D
sp - M
sp- M 1 101050721 Seals package

sp - A

160 cm3
9.76 cu in
PARTS TO CHANGE
Depending on applications
Every 400 hours.
Every 800 hours.
Every 1600 hours.
Every 3200 hours.
Long term, only if damaged.

101077317
- 9-
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020

Qty CPN Designation

Motor hose

10 1 86754801 Hose
20 1 86752789 Hose
30 1 86747318 Hose
40 1 86247723 Plug

50 Nm 40
36.8 ft.lb
105 Nm
77.3 ft.lb 10
Drain
ROT R
32 Nm
+ 23.5 ft.lb

20

56 Nm
41.2 ft.lb
ROT L 30

- 105 Nm
77.3 ft.lb

PARTS TO CHANGE
Depending on applications
Every 400 hours.
Every 800 hours.
Every 1600 hours.
Every 3200 hours.
Long term, only if damaged.

101077317
- 10 -
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020
126 Nm
93 ft.lb 130 Qty CPN Designation

110
140 10 1 86746914 Distribution cover
20 20 1 86746922 Push
10 30 1 86746930 Distributor
120 40 1 86746898 Cylinder
150
30 170
50 1 86781747 Down cylinder
60 1 86746906 Strike piston
70 1 86747110 Hyd. stop piston
sp - A
80 1 86747045 Thrust liner
D 90 1 100999252 Seal
40
D 100 1 86752276 Seal
110 1 86746948 Rear cover
120 1 86668662 Pin
531,7 mm mini 130 12 86745619 UNF ½”, screw
20.93“ mini D 140 2 86758182 Seal
50 D 150 4 86754603 O’ring
60 160 1 86746955 Shank thrust
70
170 4 86580966 Plug
80 D 180 1 86746542 Seal

100
160 sp- A 1 101037824 Seals package
150 PARTS TO CHANGE including :
90 Depending on applications (All parts marked D

LM Every 400 hours.

Every 800 hours.
Every 1600 hours.
180 Every 3200 hours.
Long term, only if damaged.

101077317
- 11 -
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020

Qty CPN Designation

10 1 86788106 Pressure governor

80 block
90
20 1 86747284 Valve- BP
30 1 86747292 Seat valve
220 Nm 130
162 ft.lb 40 2 86747276 Valve- HP
110 50 4 86785359 UNF ⅝”, socket
70 80 head screw
60 2 95267340 UNF ⅝”, Hex.
30 120 screw
20 H 70 1 86237609 O’ring
40 H 80 2 86281938 O’ring
H 90 1 86278835 O’ring
120 100 1 86789278 Pin
178 Nm
60 110 2 86754645 Adapter
131 ft.lb
100 H 120 2 86261187 O’ring
130 2 86250636 Plug
10 178 Nm
50 Glued at mounting
131 ft.lb
140 1 86386497 Plug

140
25 Nm PARTS TO CHANGE

18 ft.lb Depending on applications

Every 400 hours.
Every 800 hours.

UR
178 Nm Every 1600 hours.
50
131 ft.lb Every 3200 hours.
Long term, only if damaged.

101077317
- 12 -
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020

Qty CPN Designation

150 1 86788114 Adapter drain

135 Nm
99 ft.lb H 160 1 86584141 O’ring
H 170 2 86788270 O’ring
150 210
160
With Drain hose
170
180 1 86749025 Drain SP plug
H 190 1 86356953 O’ring
260
H 200 1 86221884 O’ring
220 185 Nm 210 1 86247723 Plug
136 ft.lb
230 With HP hose
240 220 1 86788122 SP Adapter
H 230 1 86261187 O’ring
H 240 2 86262250 O’ring
sp - C
250 1 86270600 Adapter
260 2 86247723 Plug
270 1 86814357 Sequence valve kit
250 260
190 sp- C 1 86790383 Seals package
80 Nm
including :
59 ft.lb
(All parts marked H
270 200

180 PARTS TO CHANGE

25 Nm Depending on applications
18.4 ft.lb Every 400 hours.
Every 800 hours.
Every 1600 hours.
Every 3200 hours.
Long term, only if damaged.

101077317
- 13 -
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020

228 Nm Qty CPN Designation

20
168 ft.lb

60 10 1 86789260 Slide seat

20 1 86788023 Plug
40 30 1 86788015 Slide
69,5 mm 40 1 86251519 Spring
2.73 in sp - C 50 16 86312196 Adjusting shim
50
H 60 1 86281938 O’ring
H 70 1 86325602 O’ring
80
80 1 86793924 Ring

30
sp- C 1 86790383 Seals package
including :
10 (All parts marked H

70

PARTS TO CHANGE
Depending on applications
Every 400 hours.
Every 800 hours.
Every 1600 hours.
Every 3200 hours.
Long term, only if damaged.

101077317
- 14 -
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020

Qty CPN Designation

Injection hose

10 1 101015644 Hose
20 1 86747300 Flange
30 1 86250636 Plug
40 2 86296084 Adapter
50 2 95317335 Screw

30

40 220 Nm
162 ft.lb
20

152 Nm
50
40 112 ft.lb
220 Nm
162 ft.lb

10
130 Nm
PARTS TO CHANGE
95.7 ft.lb
Depending on applications
Every 400 hours.
Every 800 hours.
Every 1600 hours.
Every 3200 hours.
Long term, only if damaged.

101077317
- 15 -
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020

A B Qty CPN Designation

86752383 + 86752326
86773066 10 1 86793973 Plug Ø 45

86772225 + A 1 86772233 Control gauge

B 1 86752359 Shank Control
gauge

10

PARTS TO CHANGE
Depending on applications
Every 400 hours.
Every 800 hours.
Every 1600 hours.
Every 3200 hours.
Long term, only if damaged.

101077317
- 16 -
(11/2020) Rev.00
 E MONTABERT HC 95 - 2020

Qty CPN Designation

Permanent HP sequence valve kit 10 1 86759545 Valve body

20 1 86811593 Sequence valve
- 86814357 - 30 4 86270592 Adaptor
40 4 86249299 Plastic plug

20
3 10
140 bar

1 140 bar
40

30 30
3 2 40
30
4 DRAIN
40

0.2 - 16.6 Mpa

4
1
86814357
30
40
2
1 - HP DRIFTER
2 - HP EXT MACHINE
3 - HP EXT DRIFTER
4 - DRAIN MACHINE

E
101077317
- 17 -
(11/2020) Rev.00
 FRANCE
CS 80097
MONTABERT SAS
203 Route de Grenoble

69805 St PRIEST CEDEX

MONTABERT ®

 Copyright Montabert. Any unauthorized use or copying of the contents or

any part thereof is prohibited. Illustrations and photos in this brochure may show
equipment with optional extras. Nothing contained in this brochure is intended to
extend any warranty or representation expressed or implied, regarding the products
described herein. Any such warranties or other terms and conditions of sale products
shall be in accordance with Montabert’s standard terms and conditions of sale for
such products, which are available upon request. Specifications and machines can be
modified at any time and without notice. Montabert Société par Actions Simplifiée
www.montabert.com

(SAS) au capital de 8,459,359 € - 397 482 647 RCS LYON