sr.no.

Question
1 MPLS is a
2 In MPLS Network, At the last Edge LSR, label
is added to the packet. What is this process
called
3 If there are two MPLS Labels in an MPLS
Label Stack, the last labels BoS bit is set to
4 In MPLS Header field, number of bits used for
TTL are---------------
5 In GPON, the maximum differential fiber
distance is __________ kms.
6 In passive optical network bandwidth
requirements of narrowband and broadband
services is supported by____________
7
---------------- is a driver for the deployment
of advanced optoelectronics technologies.
8
OTN supports internal switching at:----------
9 In OTN standard frame format and payload
mapping is provided by:----
10
SDH is ----------
11 In SDH system, if STM-1 has bandwidth of
150,336kbps/sec then calculate bandwidth
for STM-64
12 A PON uses non-powered
_____________ to separate signals as
they progress through the network
13 ___ is used to terminate the signal at the
customer premises.
14
In GPON Topology the central switch that
connects the building network to the wide
area voice, data and video networks?

15
Find the full form of LTE
16
What is OAM with respect to SDH

17 STM frame structure has how many rows

and how many coloumns
18 What is the frame repetition time of a SDH
frame structure
19
_________________is a method of
multiplexing in the wavelength
domain, used in fiber-optic transmission.

20 In MPLS Header field, Label field length

is:-
21 In FTTH architecture generally in
upstream, protocol is required.
22
In OTN network, Characteristics of optical
transport network hierarchy equipment
functional blocks is defined by:

23 XG-PON is also described as in

IEEE(802.3)
24 1G class PON,10G class PON and video
distribution services can co-exist on the
same ODN because
their-------------------------
25
Digital broadcast service is a example of:

26 In MPLS Headerfield BOS stands for:-

27
WPC Wireless Planning and Coordination
is responsible for:

28 In B-PON optical network B stands for:

29 Interface over SNI to service nodes and to the
PON is provided by __________
30 What is the maximum split ratio in FTTH
with current technology
31
MQTT

32 Industrial Robot and Sensors are connected

through
33 What is the name of first recognized IoT
Device
34
What is the full form of the LPWAN?

35 Which one of the following protocols

is lightweight?
36
Each IP packet must contain
37 Frequency band used by 802.11 ah
standard is:
38 Identify which one of the following is not a
part of functional layer of RAMI 4.0
39 Late generation systems developed into
first generation
40 RAMI 4.0 is a dimensional architecture
41
An IoT gateway functions are

42
"Actuators" main function is

43
_____________________ has ability to
convert the information obtained from the
outer world into data for analysis

44 ______________ is the author of The

Fourth Industrial Evolution
45 To model the driving behavior and to
detect driving patterns such as sharp turns,
sudden acceleration, hardbraking, drifting
and speeding sensors used in automotive
are
46
SCADA is the acronym of

47

Supervisory Control And Data Acquisition

(SCADA) is

48
What does the IIOT acronym stand for?
49 Which one of the industrial
revolutions used electric energy to
create mass production for the first
time?
50 In the Digital Age (3rd Industrial
Revolution) what two major inventions
changed production and paved the way to
Automation
51
Which one of the below is not a function of
a SCADA system?

52
These are main component of home
appliances control system.
53
__________________________________
________ provides thermal comfort and
acceptable air quality inside home.

54 In wired communication technology PLC

stands for--------
55
What is the frequency rate of z-wave?
56 What is another name of the tactile
sensor?
57 In a networks, all nodes or devices
communicate directly with the server
58 Smart health care includes for data &
information collection
59 M2M network architecture not includes
59 M2M network architecture not includes
60 Extremely short range is the limitation of
communication technology.
61 Medium range communication upto10Km
is achieved through-----
62 Wireless range for indoor applications
using ZigBee protocol is-------
63 Working in unlicensed frequency band is
the limitation of -------------- cellular
communication technology.
 ETE
option a option b
2 layer protocol 2.5 layer protocol

pop push

0 1

1 20

2 20

GPON BPON

NGNC GSM

200 Mbps 1.25 Mbps

G.878 G.709

Session layer Protocol Transport layer Protocol

1202688 2405376

repeaters optical splitters

ONT (optical network
OLT (optical line termination)
termination)/ONU

ONT (optical network

OLT (optical line termination)
termination)

Loop Term Evolution Long Term Evolution

operations administration
optical access management
maintenance

9 rows, 270 columns 270 rows,9 columns

1 microsec 12 microsec

Frequency Division
code division Multiplexing
Multiplexing

2 bits 20 bits

CDMA FDMA

G.872 G.798

1G-EPON 2G-EPON

Voltage and current levels

Transmission costs are equal
are same
ASymmetric broadband Symmetric broadband
service service

Bits of service Bits on Stack

Frequency spectrum
Providing information
management including
resources
licensing and needs of users

Binary Bipolar
ONU OLT

1:04 1:16

message queuing telemetry message queuing telephone

transport transport

device 2 device device to gateway

ATM radio

low protocol wide area low power wide area

network network

IP HTTP

source IP address destination IP address

60 GHz 2.4 GHz

application support layer business layer

SCADA, IIOT SCADA, IOT

1 2
Forwarding packets between Enables local, short-range
LAN and WAN on the IUP communication between IoT
layer device

these devices are able to

get information
intervene the physical reality

sensors actuators

Professor Claud Schwaz Professor Klaus Schwaz

GPS, Gyroscope, orientation Voice, face print or finger

sensors, and accelerometer print

supervision control and

data acquisition supervision control and
data acquire

a business management software

a computer system collecting &
used for business planning, order
analyzing real-time data and it
processing, supply chain
monitor, control & optimize
management, sales and
industrial plants.
distribution, accounting, etc.

Intelligence Internet of Things International Internet of Things

1st Industrial Revolution 2nd Industrial Revolution

Model Control Systems
Switches and Relays

Monitor, gather and process Interact with machines and

data. devices

modulator, mixer, local

amplifier, equaliser, oscillator.
oscillator

Heating, ventilation, and air

Video monitoring system
conditioning (HVAC)

phase locked control phase locked communication

915 MHz
915 GHZ
weight sensor
proximity sensor

fully distributed client server

E health and M health X health and M health

M2M area domain application domain
M2M area domain application domain
NFC LoRa

WPAN WNAN

upto 10 meters upto 70 meter

Cellular e MTC LoRa
option c option c ans
3 layer protocol 1 layer protocol b
b
swap php

b
2 10
d
3 8
b
200 2000
b
DPON APON

FTTH c
WCDMA

c
1.25 Gpbs 2 bps
b
G.798 G.873.1

Application b
Service Protocol
Protocol
c
9621504 same as STM-1

b
amplifiers logic gates
 a
PON logic gate
a
FDT FDP

Loop Technology b
Long Technology Evolution
Evolution
b
operations administration operations access
management management

270 rows,90 a
27 rows,9 columns
columns
c
125 microsec 1250 microsec

Dense d
Wavelength
Time Division Multiplexing)
Division
Multiplexing
b
16 bits 64 bits
c
TDMA WDMA
d
G.709 G.873.1

d
3G-EPON 10G-EPON

Downstream d
Downstream signals use same signals use
wavelengths different
wavelengths
 Parallel a
Asynchronous service transmission
service
Binary on shift Bottom of stack d
c
managing and setting standards for Creating standard
spectrum use for WLAN

Big Broadband d
b
NGN NT
c
1:64 1:08
a
message quick
message queuing telemetry trick
telemetry transport

between data a
gateway to data systems
systems
a
smart watch video game
b
long power wide
long protocol wide area network
area network
c
MQTT CoAP
c
both a and b none of the above
c
sub 1 GHz 5 GHz
a
assets layer information layer
a
SCADA, PLC PLC, IOT
3 4 c
a
both a and b none of the above

c
analysis and
analysis and management of data
storage of data
a
cloud server

b
Professor clinton Professor crook
a
Ultrasonic sensor,
Emission, mileage sensor pressure and
temperature

supervision c
supervisory control and
check and
data acquisition
data acquisition
b
a device, which
used for controlling or regulating a communicates with
machine or system. the machine
controls.

Industrial Internet of d
Intel Internet of Things
Things
b
4th Industrial
3rd Industrial Revolution
Revolution
 c
Programmable Logic Controllers Process
(PLC) and Robots automation

d
trigger the
Record events into a log file invoicing process
in the ERP system

d
voltage amplifier, filter, power Sensors,
amplifier processors, relay
b
Smart waste
Smart lighting system management
system.

pulse locked c
power line communication
control
a
2.54 GHz 50 Hz
c
touch sensor motion sensor
b
co-operative point to point

A health and M a
E health and A health
health
network domain E governance d
network domain E governance d
a
SIGFOX WiSUN
b
NFC RFID
b
upto 10 km upto 1 meters
 b
Cellular NB IoT Ethernet
chp
3
3

3
3

3
3

3
3

3
3

4
4
4

4
4

5
5
5

5
5