WHITE SPACE

STRUCTURED
CABLING

DATA CENTER
STRUCTURED
CABLING SOLUTIONS

RELIABLE, EFFICIENT, SCALABLE DATA CENTER SOLUTIONS

POWERED BY SPECIALIST BRANDS
2 STRUCTURED CABLING SOLUTIONS WHITE SPACE
 With the complexities of today’s data centers, as well as the promise of higher speeds and technological
breakthroughs in the not-too-distant future, it’s no wonder that the importance of structured cabling is
also increasing.
In contrast to the many limitations inherent in point-to-point connections, structured cabling — or the use of
smaller standardized subsystems — allows easier individual connections to be found, moved, and generally
managed. Clearly, for forward-thinking data centers, structured cabling infrastructure is the way to go when
it comes to data cabling solutions.

UPTIME
With newer data centers, access to critical information is the business’s lifeblood, which means that uptime
requirements — often with a rating as high as 99 percent — must be supported by the cabling system you install.

SCALABILITY
Whatever cabling solution you choose today will undoubtedly be required to make room for more bandwidth
and higher speeds in the future. Scalability is as essential in your cabling infrastructure as it is to the
equipment it connects.

FUTURE-PROOF
Along with scalability, your cabling system must be easy to adapt for future equipment changes, such as
the push for more modular device usage and migrations to the cloud and virtual services.

LEG R AND’S R E SP O N SE 0
The LCS3 cabling system is a modular and flexible connection and distribution system for:
copper and fiber optic technology
19" installation
pre-assembled copper and fiber trunking technology
splicing technology and on-site assembly of copper connection modules
The overall system is designed in such a way that the various basic housings and basic support systems for
accommodating the module housings can be configured for the most diverse areas of use and application conditions
via standardised components and individual parts.
This very high degree of flexibility means that customer-specific requirements can be configured individually.

CABLE MANAGEMENT 1U PANEL, 2U PANEL, 4U PANEL COPPER AND FIBER CASSETTES

ACCESSORIES

STRUCTURED CABLING SOLUTIONS WHITE SPACE 3

 Data center structured cabling solution

LCS³ system:
Performance

Legrand’s LCS3 system offers you a complete range of copper

solutions as well as fiber optic solutions designed to deliver
advanced network performance:
 25 Gbps and 40 Gbps Ethernet applications (Copper system)
 40 Gbps, 100 Gbps and 400 Gbps Ethernet applications
(Fiber optic system)
 MTP/MPO high density and up to Cat. 8 solutions (Copper
and Fiber optic systems)

50 LCS³ system: Efficiency

54 LCS³ system: Scalability & Maintenance

4 STRUCTURED CABLING SOLUTIONS WHITE SPACE

Data center structured cabling solution › LCS3 system: Performance

INSTALLATION
KITS

Zero-U kit for universal fixing 1U to 4U kit for overhead fixing

The Zero-U kit Cat.No 0 321 03 enables you to mount No space available in your LCS3 enclosure? The innovative
cassettes on 19" uprights, raised access floors, wire kit Cat.No 0 321 89 enables you to fix the High Density
and sheet metal cable trays, structural uprights of the modular panels on wire cable trays, above the enclosure.
enclosure, etc.
The kit can take up to 2 slim High Density cassettes
Cat.Nos 0 321 68/69/70 or 1 universal High Density cassette
Cat.No 0 321 59 or 0 321 60.  erfect toolless fitting on cable trays. It can also be
P
installed on roofs of racks.
 aintains duplex multimode fiber architecture.
M
Efficient solution to optimize space without the need Scalable (move, add, change) and efficient (space
to add an enclosure. optimization) system.
 ompatible with 1U, 2U and 4U High Density modular
C  asy installation and maintenance.
E
panels.
 an be equipped with fiber optic and copper solutions.
C
Easy mounting on cable trays (such as Cablofil) thanks  ompatible with automatically removable cassettes.
C
to quick-fixing solutions.
 ccommodates the same solutions as 19" patch panels.
A

STRUCTURED CABLING SOLUTIONS WHITE SPACE 5

 Data center structured cabling solution › LCS3 system: Performance

HIGH DENSITY
MODULAR PANELS

From 1U to 4U
Optimize space and connectivity with our three HD modular panels! These quick-fixing solutions (automatic mounting and
automatic grounding on 19" uprights) offer you optimum capacities per U: 96 in LC version, 48 in SC version, and 24 in ST version!
Keeping link connections accessible and manageable, they offer slim and mix-media cassettes.

4U HIGH DENSITY PANEL

Can hold up to 32 slim cassettes (into 16 supports)

Rear management Possibility to mix Each panel can be Quick fixing solutions on all
accessories to suit all fiber and copper equipped with both the versions from 1U to 4U
configurations: fan out, cassettes in one standard and slim
cable glands, copper panel High Density cassettes
Cord management system
(except for the 1U panel, to
be equipped with Cat.No
0 321 78) with front, side
and bottom protection of
the patchcords, preventing
any risk of damage

Labeling system for easy

identification

Equipped with the new-

generation Quick-fix
system for automatic Integrated front door for
(screwless) mounting on protection against intrusive
racks or cabinet uprights patching and laser

1U HIGH DENSITY PANEL 2U HIGH DENSITY PANEL

Can hold up to 8 slim Can hold up to 16 slim
cassettes (into 4 supports) cassettes (into 8 supports)

6 STRUCTURED CABLING SOLUTIONS WHITE SPACE

Data center structured cabling solution › LCS3 system: Performance

Fiber optic is a transmission medium that enables a larger bandwidth to be used than copper cables. With fiber
optic cables, transmission is based on the propagation of light pulses, generated by an LED or a laser source in the
infrared band, along a glass fiber. Inside an optical fiber, the signal can either be propagated in a straight line, or be
reflected many times. Straight line propagation mode is said to be zero order. Singlemode fibers only use one mode
to propagate light. The diameter of their cores is between 8 and 10 µm. Multimode fibers allow several propagation
modes, and the diameter of their cores is 50 µm or 62.5 µm (the latter is hardly ever used now).
The diameter of the cladding is usually 125 µm. Multimode fibers are used in indoor installations and enable more
economical devices to be used. They are subject to modal distortion when the different modes propagate at slightly
different speeds, limiting the maximum distance at which the signal can be received correctly.
Singlemode fibers are used in outdoor installations as they can cover much longer distances and reach much higher
speeds.

FIBER OPTIC SYSTEM

MTP SOLUTIONS
High-speed solution

With data centers, increased data rates have become a priority requirement. The IEEE has introduced parallel optics
as an alternative to higher bandwidth fiber, starting with 40Gbps and now reaching 800Gbps Ethernet.

To answer this need, Legrand has introduced the MTP (Multiple-Fiber Push-On/Pull-Off compatible MPO) fiber
solution to the catalogue. It guarantees speed, resistance, high performance, and high density.

STRUCTURED CABLING SOLUTIONS WHITE SPACE 7

 Data center structured cabling solution › LCS3 system: Performance

40/100/400 Gigabit ethernet connectivity and cable

Identified by IEEE, TIA and ISO/IEC as the solution for non-duplex applications.
The term MPO is the generic name, while the term MTP is a specific higher
performance version with lower insertion loss.
MTP connector features:
a high-speed connection with 12 fibers (2x12 for
24 fibers and with cassettes 8 fibers compatible).
p recise and safe connection.
o ptimized cable management.
h igh-density fibers.
s calable system for future upgrades.
s imple maintenance operations.
e ase of extraction. No complex installation on site - plug and play.
the MTP is a multi-core connector. 1 cable = 1 connector.

With standard active equipment, we need to convert the MTP to LC or SC

Cassette Cassette

Optical performance

MTP® Multimode Ultra Single-mode Ultra

connectors Performance* Performance*
* Performance is guaranteed only with other
0.1 dB typical (all fibers) 0.1 dB typical (all fibers) components of the same Legrand range
(Core, Ultra, and Quantum). Mixing ranges or
IL/Master 0.35 dB maximum 0.35 dB maximum using other brands' components may lead to a
(single fiber) (2) (3) (single fiber) (1) (4) different system performance. The uncertainty
value for field measurement with LSPM testing
IL Max/Random* 0.35 dB (single fiber) 0.35 dB (single fiber) using a reference cord defined in ISO/IEC
14763-3 applies to field testing with proposed
Optical return loss(5) > 20 dB > 60 dB (8° angle-polished) Legrand testing cords. Refer to the Fiber Optic
Testing Guide for Legrand Solutions.
(1)
As tested in accordance with ANSI/TIA-455-171 Method D3 / IEC 61300-3-4
(2)
As tested in accordance with ANSI/TIA-455-171 Method D1 / IEC 61300-3-4
(3)
As tested on 50µm fibers at a wavelength of 850 nm in accordance with IEC 61280-4-1
(4)
Complies with IEC 61755-3-31/GRADE B
(5)
As tested in accordance with IEC 61300-3-6 and ANSI/TIA-455-107A

LC, SC, LC APC, SC APC Multimode Ultra Single-mode Ultra

connectors Performance* Performance* * IEC 61300-3-4

IL Max/Master* 0.15 dB 0.15 dB ** IEC 61300-3-34

*** Performance is guaranteed only with other
IL Max/Random** *** 0.2 dB 0.25 dB components of the same Legrand range (Core,
Ultra and Quantum). Mixing ranges or use
of components of other brand may lead to
Typ. IL/Master* 0.08 dB 0.12 dB a different performance of the system. The
uncertainty value for field measurement with
Typ. IL/Random** *** 0.10 dB 0.12 dB LSPM testing using a reference cord defined
in ISO/IEC 14763-3 applies to field testing with
Return loss (UPC/APC) > 25 dB > 55/65 dB proposed Legrand testing cords. Refer to the
Fiber Optic Testing Guide for Legrand Solutions.

8 STRUCTURED CABLING SOLUTIONS WHITE SPACE

Data center structured cabling solution › LCS3 system: Performance

COMMON DATA CENTER APPROACHES

Multimode fiber systems have been the most cost-effective fiber solution to use in the data center because the
transceivers are much less costly than single-mode transceivers. Multimode transceivers use a vertical cavity
surface emitting laser (VCSEL) light source, which is easy to manufacture and package. Multimode fiber systems
have a shorter reach than single-mode systems; however, surveys have shown that more than 80% of data centers
links extend to 100m or less. Although single‑mode cable is less expensive, after factoring in the total system
cost of multimode versus single-mode, multimode is still far more cost-efficient.

Maximum data rate according to fiber type and number of cores used

OM3 OM4 OM5 OS1a OS2

1Gbps: 550m 1Gbps: 550m

1Gbps: 550m
10Gbps: 400m 10Gbps: 400m 1Gbps: 5km
10Gbps: 300m 1Gbps to
2-core 25Gbps: 100m 25Gbps: 100m 10Gbps to
25Gbps: 70m 400Gbps: 2km
50Gbps: 100m 50Gbps: 100m 400Gbps: 10km
50Gbps: 70m
100Gbps: 100m 100Gbps: 100m

100Gbps: 100m 100Gbps: 100m

4-core 100Gbps: 70m 100Gbps: 500m 100Gbps: 500m
200Gbps: 100m 200Gbps: 100m

40Gbps: 100m 40Gbps: 150m 40Gbps: 150m

200Gbps: 500m 200Gbps: 500m
100Gbps: 70m 100Gbps: 100m 100Gbps: 100m
8-core 400Gbps: 500m 400Gbps: 500m
200Gbps: 70m 200Gbps: 100m 200Gbps: 100m
800Gbps: 500m 800Gbps: 2km
400Gbps: 100m 400Gbps: 100m 400Gbps: 150m

400Gbps: 100m 400Gbps: 100m 400Gbps: 100m 800Gbps: 100m 800Gbps: 2km
16-core
800Gbps: 70m 800Gbps: 100m 800Gbps: 100m 1.6Tbps: 500m 1.6Tbps: 2km

Data in orange: draft applications (distances may vary at time of publication)

STRUCTURED CABLING SOLUTIONS WHITE SPACE 9

 Data center structured cabling solution › LCS3 system: Performance

FIBER OPTIC SYSTEM

CASSETTES

Slim solutions for greater connectivity

Optimize space and increase the connectivity capacity of

your infrastructure with slim cassettes! They are easy to
install and maintain from the rear and front, and they are
agile and flexible under all circumstances.

M
 ounting either on High Density modular panels or
in a Zero-U kit.
S
 ingle-mode and multimode MTP solutions that can
be mixed on the same support.
S
 liding cassettes individually removable from front and
rear: accessible and easily manageable.
OM4 multimode slim cassette - Cat.No 0 321 69
E
 quipped with extraction button for easy maintenance:
reduced time, cost and risk of MAC.
H
 igh-performance with low insertion loss.
U
 niversal polarity offers flexibility in case of changes.

TYPE CAT. NO
12 LC OM5 multimode On demand
12 LC OM4 multimode 0 321 69
12 LC OM3 multimode 0 321 68
12 LC OS2 single-mode 0 321 70
Blanking module 0 321 39

OS2 single-mode slim cassette - Cat.No 0 321 70

Slim cassettes are to be

mounted on HD modular panels
with support Cat.No 0 321 38.
The support can take up to
two slim cassettes.

Slim cassettes Cat.Nos 0 321 69/70

mounted on modular panel Cat.No 0 321 76
with support Cat.No 0 321 38

10 STRUCTURED CABLING SOLUTIONS WHITE SPACE

Ready for
FUTURE
APPLICATIONS!
Our on-demand OM5 offer meets all your requirements in
terms of connectivity! The infrastructure can easily evolve from
25 G or 50 G to 100 G and to 400 G thanks to parallel and
multiplexing applications.

OM5 multimode MTP adaptor PERFORMANCE AND WAVELENGTH

OM3 and OM4 fibers are optimized according to the

wavelength traditionally used: 850nm.
To accept the four signals used in multimode WDM,
OM5 has been redesigned to accept wavelengths
from 850nm to 950nm. The diagrams below provide
a graphical representation.

Performance OM3 / OM4 Fiber

Performance OM3 / OM4 Fiber

OM5 12 LC multimode block

850nm Wavelength
850nm Wavelength

OM3 / OM4 Fiber OM5 Fiber

OM3 / OM4 Fiber OM5 Fiber
Performance
Performance

850nm 950nm Wavelength

850nm 950nm Wavelength

STRUCTURED CABLING SOLUTIONS WHITE SPACE 11

 Data center structured cabling solution › LCS3 system: Performance

SPLICING
CASSETTE

PRETERMINATED
CASSETTE
PUSH-BUTTON
CASSETTE
Fast push-button system
to facilitate upgrade and
COPPER maintenance operations
CASSETTE

12 STRUCTURED CABLING SOLUTIONS WHITE SPACE

Data center structured cabling solution › LCS3 system: Performance

FIBER OPTIC SYSTEM

PANELS

Modular panels

Innovative quick-fixing solution.

M odular blocks to adapt to modular
panel or drawer:
LC, SC, ST, LC, APC, SC APC.
P ossible to add modular blocks,
blank panel, MTP adaptor.

HD Modular panels

C
 assettes slide in from front & rear.
F
 ast push-button on cassette.
S
 plicing cassette which takes all
modular blocks.
M
 ixture of fiber/copper on cassette
panel.
T
 runk & cord management system.

STRUCTURED CABLING SOLUTIONS WHITE SPACE 13

 Data center structured cabling solution

LCS³ system:
Efficiency

Legrand’s LCS3 system offers you copper and fiber optic

solutions designed to enhance your infrastructure’s efficiency:
 48 ports per unit for high density (Copper system)
 90 LC per unit for high density (Fiber optic system)
 1 44 LC per Unit for ultra-high density (Copper and Fiber
optic systems)

54 LCS³ system: Scalability & Maintenance

14 STRUCTURED CABLING SOLUTIONS WHITE SPACE

Data center structured cabling solution › LCS3 system: Efficiency

COPPER SYSTEM
PATCH PANEL HD SOLUTION
UP TO 48 PORTS PER UNIT
High-density patch panel. It has changed from 24 to 48 ports, guaranteeing
a reduced space occupied and making future upgrades easier. Designed to
house four blocks of 12 connectors each.

Tidy cable management

Single block with 12 connectors Fast push-button extraction Quick-fix system

QUICK-FIX system
Innovative quick-fixing solution:
P ush and connect system.
A utomatic earth connection.
In-rack cabling optimized.
A ccessory for patch cords with rotating system
for angle adjustment and label holder.

Compatible with all panels (flat, angled, HD)

STRUCTURED CABLING SOLUTIONS WHITE SPACE 15

 Data center structured cabling solution › LCS3 system: Efficiency

COPPER SYSTEM
PATCH PANELS
The patch panels have been designed and produced to optimize space, with up
to 48 ports per unit, and make maintenance and future upgrades easier.
They are available in both flat and angled versions.
They have a quick system for pulling out the unit and an innovative cable guiding
system for tidy and easy cable management.

Innovative cassettes

 liding cassettes: easier maintenance.

S
Fast push-button extraction.
Innovative modular cassette system.
Easy maintenance: hands-free solution, cassette
maintained after extraction.
Easy to mix with Legrand fiber optic solutions.
Block of 12 connectors for patch panel

Flat patch panel solution, 48 unit ports

Fast push-button
extraction

16 STRUCTURED CABLING SOLUTIONS WHITE SPACE

Data center structured cabling solution › LCS3 system: Efficiency

Strong steel Cover for airflow Tidy cable Quick-fix

structure management management system

High density - This supplies up Simple and efficient

to 48 ports in a single unit to identification of the ports
take up less space in the rack

Angled patch panel solution from 24 to 48 ports per unit

Patch panels with an angled design allow the cable to run into each side of the
rack, creating a correct cable radius of curvature.
This avoids the need to manage the cables horizontally, and allows the patch
cords to be carried directly in the vertical cavities.

Also available
in the 24-port version

STRUCTURED CABLING SOLUTIONS WHITE SPACE 17

 Data center structured cabling solution

LCS system: 3

Scalability
& Maintenance

Legrand’s LCS3 range offers you innovative systems to facilitate

wiring and installation, while offering increased data rates with
both the copper solution and the fiber optic solution.

18 STRUCTURED CABLING SOLUTIONS WHITE SPACE

Data center structured cabling solution › LCS3 system: Scalability & Maintenance

COPPER SYSTEM
RJ 45 CONNECTORS
The TOOLLESS CONNECTORS with toolless fast connection are available
in all categories for installation on patch panels and in the workstation.
A perfect connection can be obtained in a few seconds, guaranteeing the
optimum performance of the link from the patch panel to the workstation.

The toolless connectors are colour-coded so their Cat. 5e: grey

category can be safely identified:

Cat. 6: blue

Cat. 6a: yellow

Cat. 8: aqua

WANT TO KNOW ABOUT

PoE AND INCREASE
THE POWER OF YOUR
NETWORK?
 CONTACT YOUR LOCAL
SALES REP TO GET OUR PoE
INSTALLATION GUIDES!

STRUCTURED CABLING SOLUTIONS WHITE SPACE 19

 Data center structured cabling solution › LCS3 system: Scalability & Maintenance

COPPER SYSTEM
OPTIMUM Cat.8 connectors
PERFORMANCE The toolless Cat. 8 STP connectors with transmission
WITH CAT. 8 speed (bit rate) from 25 Gbps to 40 Gbps, are integral
to the performance of the LCS3 system.

In accordance with ISO/IEC 11801 series standards.

Tested up to 2500 connection/disconnection cycles.
A perfect connection in just a few seconds.

Connection & cabling

To maximize performance, combine the Legrand Cat. 8 connector with the Legrand
Cat. 8 cable supporting up to 40 Gbps over a single cable.
The Cat. 8 cable is terminated with an improved dedicated RJ45 connector, which can
support future performance.
The performance is 4 times better than that of a Cat. 6a cable with up to 2000 MHz
bandwidth.

D
 ouble screening to avoid interference and loss of data.
 edicated to higher capacity in data centers and equipment rooms.
D
Compliant with ISO/IEC 11801 series standards.

20 STRUCTURED CABLING SOLUTIONS WHITE SPACE

Data center structured cabling solution › LCS3 system: Scalability & Maintenance

Legrand guarantees the following performance on end-to-end links of Cat. 6a/Class Ea:
3dB margin on Channels, on Return Loss (RL) and Near End Cross Talk (NEXT) performance, for the
complete frequency range, based on ISO/IEC limits.

 o marginal results (shown with Asterisk on test results) on Permanent Links.

N
Valid on standard compliant 2 connectors channels.

Next Return loss

100,00 45,00

90,00 40,00

80,00
35,00

70,00
30,00
60,00
25,00
50,00
20,00
40,00

15,00
30,00

10,00
20,00

10,00 5,00

0,00 0,00
0 100 200 300 400 500 600 0 100 200 300 400 500 600

Standard limit LCS3 Guarantee LCS3 Typical NEXT Standard limit LCS3 Guarantee LCS3 Typical RL

Applications distances according to category of Cabling

LCS3 LCS3 LCS3 LCS3

Cat.5e Cat.6 Cat.6a Cat.8
(1)
Frequency 100MHz 250MHz 500Mhz 2000MHz (1)
 aximum frequency defined in the
M
standards
Application
(2)
Follow ISO/IEC TR 11801-9904 or TIA
1000Base-T TSB 5021 to evaluate the possibility
100m 100m 100m 100m on installed links. Distance will
depend on many factors.
2.5Gbase-T Possible(2) Possible(2) 100m 100m
(3)
Follow ISO/IEC TR 24750 or TIA TSB
5Gbase-T 155-A to evaluate the possibility on
Possible (2)
Possible (2)
100m 100m installed links. Distance will depend
on many factors.
10Gbase-T N/A(4) Possible(3) 100m 100m
(4)
Not Available.
25Gbase-T N/A(4) N/A(4) Possible(5) 30m (5)
Follow ISO/IEC TR 11801-9905 to
evaluate possibility on installed
40Gbase-T N/A(4) N/A(4) Possible(5) 30m links. Distance will depend on many
factors.

STRUCTURED CABLING SOLUTIONS WHITE SPACE 21

 Data center structured cabling solution › LCS3 system: Scalability & Maintenance

TOOLLESS CONNECTOR CONNECTION PHASES

1 2

Take the wire housing Pass the cable through the back of the wire housing

3 4

Separate and insert the pairs Cut the pairs

5 6

Install the wire housing without pushing Push down the lever and lock the connector

22 STRUCTURED CABLING SOLUTIONS WHITE SPACE

Data center structured cabling solution › LCS3 system: Scalability & Maintenance

COPPER SYSTEM
PRE-TERMINATED COPPER
TRUNK CABLE SOLUTION
In a data center, copper cables are an ideal solution as they can offer significant advantages
in terms of capital expenditures, operating expenditures, and reliability. Pre-terminated copper
trunk cables as a structured cabling option for quick and easy deployment in permanent link
trunks and equipment port harnesses of data center architectures can be used for interconnect
and cross-connect applications.

Tested assemblies
All cable assemblies are tested to ensure
that each installation functions properly.

RJ 45 STP-Jacks
High-quality connectors ensure the
reliability and stability of the system.

Different trunk solutions are possible for different applications

J ack-to-jack copper trunk

The use of pre-assembled copper Ethernet trunk cables from Jack to Jack requires the use of
empty patch panels at both ends.
P
 lug-to-plug copper trunk
Plug-to-Plug copper cables are used to establish a direct connection between active devices
(e.g. between server and switch). They can also be used in an open workspace as a bundled
patch cable group.
J ack-to-plug copper trunk
Jack-to-plug copper cables are used to extend switch ports and for cross-connect connections.
They are plugged directly into the active components on one side and require the use of empty
patch panels on the other side.

STRUCTURED CABLING SOLUTIONS WHITE SPACE 23

 Data center structured cabling solution › LCS3 system: Scalability & Maintenance

Examples of use

I nterconnect
In general data center cabling, copper Ethernet trunk cables provide a permanent connection
between patch panels at both ends Jack-to-jack
- one endcopper
is in trunk cable
a switch/network cabinet, and the other
is in a server cabinet.

Jack-to-jack copper trunk cable

Patch panel Patch panel

Patch panel Patch panel

C
 ross-connect
Cross-connect cabling usually uses a defined patch area (often with two or more adjacent
patch panels) between the control/network cabinet and the server cabinets. Copper patch
cables are used to connect the active devices and patch panels at the control/network cabinet,
the cross-connect cabinet, and the server cabinet.

Jack-to-jack copper trunk cable Jack-to-jack copper trunk cable

Jack-to-jack copper trunk cable Jack-to-jack copper trunk cable

Patch panel

Patch panel Patch panel

Patch panel
Patch panel

Patch panel Patch panel

Patch panel

Patch cords

Patch cords

24 STRUCTURED CABLING SOLUTIONS WHITE SPACE

Data center structured cabling solution › LCS3 system: Scalability & Maintenance

Details

U
 se
- Preterminated trunks made of 6x4 twisted pairs cables and 6 x RJ 45 connectors at each end.
Designed for ease of installation and space saving in data center environment.
- Delivered with an individual test report.

Nota:
- this solution is not intended for the use of PoE. In the case of PoE, to be installed according to
ISO/IEC 14763-2 and EN 50174-2. Contact Legrand for any temperature derating calculations
linked to the environment or PoE.
- maximum patch cord length associated with these pre-terminated trunks: 5m

Description
Preconnectorised solution composed of:
- 1 surgain cable 6 x 4 pairs
- 6 RJ 45 LCS3 connectors at each extremity (protected in bubble bags)
- factory recipe
- cable tracking 1 to 6

Installation

To be installed in LCS3 copper cassette

To be ordered separately


Technical, mechanical and electrical features
Refer to components technical data sheets.

Environmental features
Refer to components technical data sheets.

STRUCTURED CABLING SOLUTIONS WHITE SPACE 25

 Data center structured cabling solution › LCS3 system: Scalability & Maintenance

COPPER SYSTEM
CABLES
The cable is one of the most critical components in horizontal wiring for the performance
of the whole link, in terms of both the product's quality and the installation's conformity.
Any cable installation error will seriously compromise the performance of the installation.
For structured cabling systems, the standard requires the use of category 5e, 6 and
6a (100 MHz, 250 MHz and 500 MHz respectively) twisted, symmetrical 4-pair cables
with an impedance of 100 Ω 1).
The cable can be of the following type:
Unshielded U/UTP (Unshielded Twisted Pairs).
Shielded F/UTP (Foiled Twisted Pairs).
Double shielding SF/UTP or S/FTP.

NOTE 1): To date, category 7 is not very widely used, even though it is
standardised and can offer high performance levels. It is used for reasons
of form factor, cost, and where there are installation difficulties.

EXAMPLES OF LEGRAND CABLES

Storage/installation Operating
Sheath
temperature temperature

Cat. 6a LSZH (zero halogen cables)

conforming to standard NFC 32062,
F/UTP 0 to +50°C -20 to +60°C
flame retardant conforming to
100 Ω standards IEC 332-1 and NFC 32070

Cat. 6 PVC or LSZH cables conforming to

standard NFC 32062, flame retardant
U/UTP 0 to +50°C -20 to +60°C
conforming to standards IEC 332-1
100 Ω and NFC 32070

Cat. 6 PVC or LSZH cables conforming to

standard NFC 32062, flame retardant
F/UTP 0 to +50°C -20 to +60°C
conforming to standards IEC 332-1
100 Ω and NFC 32070

Cat. 5e PVC or LSZH cables conforming to

standard NFC 32062, flame retardant
U/UTP 0 to +50°C -20 to +60°C
conforming to standards IEC 332-1
100 Ω and NFC 32070

NOTE: For all other types of cable, please contact the Legrand sales network

26 STRUCTURED CABLING SOLUTIONS WHITE SPACE

Data center structured cabling solution › LCS3 system: Scalability & Maintenance

CPR
CONSTRUCTION PRODUCTS REGULATION

The CPR regulation aims to guarantee the free circulation The cables are classified in seven classes of Reaction to
of products made in the European Union, adopting a Fire: Aca, B1ca, B2ca, Cca, Dca, Eca and Fca identified by
harmonised technical language which can define the the subscript “ca” (cable) as a function of their decreasing
performance and essential features of all construction performance. As well as this main classification, the European
products. authorities have also regulated the use of the following
Electrical cables are rarely the cause of a fire, but when additional parameters:
they are involved, they may form a seriously hazardous
• a = acidity which defines the hazard of the fumes for people
component because of their large quantities and because
and the corrosiveness for things. Varies from a1 to a3
they are found in all rooms of the building. With careful
• s = opaqueness of the smoke. Varies from s1 to s3
prevention and making state-of-the-art systems with safe
• d = dropping of incandescent particles which could
and high-quality components in accordance with the CPR
propagate fire. Varies from d0 to d2.
regulation, fire propagation, the lack of visibility in smoke-
filled rooms, and the diffusion of corrosive and toxic gases A more severe check (System 1+) is required for the classes
can be reduced or almost eliminated. from Aca to Cca. It lays down the initial check and continuous
monitoring of the product and checks of the manufacturing
The CPR regulation (EU 305/2011) concerns all the products control system, while for the classes from Dca to Eca the
made to be permanently incorporated (installed/used) in check only lays down the initial product check (System
buildings and other civil engineering works (e.g. homes, 3). Class F, however, is based on the manufacturer’s self-
industrial and commercial buildings, offices, hospitals, declaration (System 4).
schools, undergrounds, etc.). As part of the features
considered important for the safety of constructions included
in the CPR, the European Commission has decided to
consider cables’ Reaction to Fire and Resistance to Fire,
recognising the importance of their behaviour and role
in fire. The release of harmful substances is one of the
performances considered important for cables; however,
no minimum performance levels have been established
at present because when typically used, the cables do not
release harmful substances.
All the cables installed permanently in constructions, to
transport power or for telecommunications, of any voltage
level and with copper or fiber optic conductors, must be
classified based on the classes of premises where they will
be installed.

STRUCTURED CABLING SOLUTIONS WHITE SPACE 27

Legrand cabling system, LCS3 cat. 8 Legrand cabling system, LCS3 cat. 8
flat patch panels - equipped and to be equipped angled patch panel to be equipped with connectors

Automatic cassette
removal

0 337 82 0 337 92

Equipped with new-generation Quick-Fix for automatic (screwless)

mounting on enclosure and cabinet uprights
Universal mounting on all cabinets or enclosures
Panels ensure automatic earthing of each connector
Equipped with four bundles guides fixed at the rear

Pack Cat.Nos Cat. 8 patch panel equipped with Pack Cat.Nos Angled patch panel with 24 connectors
24 RJ 45 connectors
19" panel - 1U
19" panel - 1U Equipped with new-generation Quick-Fix for
Equipped with 4 cassettes of 6 pre-fitted Cat. 8 LCS3 automatic mounting (screwless) on cabinet and
RJ 45 connectors enclosure uprights
Automatic cassette removal by simple pressure Universal mounting on all cabinets or enclosures
Each connector can be removed individually Panels ensure automatic earthing of each connector
T568A and B marking with colour codes Equipped with rear cable guide to hold cables
Equipped with rear cable guide to hold cable during during maintenance
maintenance
Supplied with coloured labels Angled patch panel to be equipped with
Compliant with ISO/IEC 11 801, EN 50173 and ANSI/ connectors
TIA 568 standards 1 0 337 92 Can take up to 24 Cat. 5e to Cat. 8 RJ 45 connectors
Flat panel
1 0 337 82 STP panel - Metal shielding - PoE++
Patch panels 24 connectors - to be
equipped
19" panels - 1U
Equipped with rear cable guide to hold cables
during maintenance
Flat panel with empty cassettes to be equipped
with connectors
1 0 337 90 With 4 automatically removable cassettes to be
equipped with Cat. 5e to Cat. 8 RJ 45 connectors
Flat panel without connectors to be equipped
with cassettes
1 0 337 91 Can take a maximum of 4 automatically removable
cassettes:
- copper to be equipped with Cat. 5e to Cat. 8 RJ 45
connectors
- fiber optic

28
Legrand cabling system, LCS3 cat. 8 Legrand cabling system, LCS3 cat. 8
connector, cords and cables accessories

0 337 56 0 337 59 0 337 55 0 337 66

0 337 85 0 337 88 0 337 03 0 337 57 0 337 58

Pack Cat.Nos Cat. 8 RJ 45 connector for flat or Pack Cat.Nos Common accessories for flat and angled
angled STP panel panels
6 0 337 85 Set of 6 STP RJ 45 Quick-connect Port blanking modules
connectors (no tools required) 10 0 337 56 Separable blanking plate
T568A and B marking with colour codes For covering 1 to 6 ports or 1 to 12 ports individually
Compliant with ISO/IEC 11 801, EN 50173 (High Density solutions)
and ANSI/TIA 568 standards Cord management
To be installed in cassettes for flat panels 1 0 337 59 2 cable guides to be clipped onto new-generation
or directly in an angled panel or a zone Quick-Fix
distribution box to be equipped Provide side cord management
Label-holder for identification
Cat. 8 cable for local networks
Specific accessories for flat panels
Performance 2000 MHz
Cable with 4 twisted pairs 100 Ω Cassette for flat panels to be equipped
1 0 337 55 Removable empty cassette to be equipped with
LSZH sheath: zero halogen connectors, takes 6 Cat. 5e to Cat. 8 connectors
EIA/TIA colour code Can be removed by simple pressing on the cassette,
Compliant with ISO/IEC 11 801, EN 50173 for ease of installation and maintenance
and ANSI/TIA 568 standards For equipping flat panels
Product conforming to the CPR regulations
Cassette with shutters for flat panels to be
S/FTP - 4 pairs equipped
5001 0 337 88 Length 500 m, supplied on a drum 1 0 337 66 Removable empty cassette to be equipped with
Weight 45 kg connectors, takes 6 Cat. 5e to Cat. 8 connectors
Can be removed by simple pressing on the cassette,
Cat. 8 RJ 45 patch cords for ease of installation and maintenance
LSZH RJ 45/RJ 45 - straight Equipped with 6 individual shutters to protect RJ 45
Compliant with ISO/CEI 11801 and EIA/TIA connectors contacts
568 standards For equipping flat panels
RAL 6027 Blanking cassette
Shielded S/FTP, impedance 100 Ω 1 0 337 57 To be used to fill gaps in the panel
1 0 337 03 Length 2 m
1 0 337 04 Length 3 m Specific accessory for angled panels
Marking kit Cover
1 0 337 58 Optimises air flow management in the enclosure
200 0 518 90 Kit of 200 coloured rings for marking
RJ 45 cords
4 colors (green/red/yellow/blue). 50 pieces
of each color
Rings to be clipped onto the patch cords
1: in metre(s)

29
Legrand cabling system, LCS3 cat. 6a Legrand cabling system, LCS3 cat. 6a
flat patch panels - equipped flat patch panels, to be equipped

Automatic cassette
removal

0 337 90

0 337 72 0 337 98 0 337 99

Equipped with new-generation Quick-Fix for automatic (screwless) Equipped with new-generation Quick-Fix for automatic (screwless)
mounting on enclosure and cabinet uprights mounting on enclosure and cabinet uprights
Universal mounting on all cabinets or enclosures Universal mounting on all cabinets or enclosures
Panels ensure automatic earthing of each connector Panels ensure automatic earthing of each connector
Equipped with four bundles guides fixed at the rear Equipped with four bundles guides fixed at the rear

Pack Cat.Nos Cat. 6a patch panels equipped with 24 Pack Cat.Nos 19" flat patch panels - to be equipped
RJ 45 connectors
19" panels - 1U
19" panel - 1U Equipped with rear cable guide to hold cables
Equipped with 4 cassettes of 6 pre-fitted Cat. 6a during maintenance
LCS3 RJ 45 connectors Automatic cassette removal by simple pressure
Automatic cassette removal by simple pressure Each connector can be removed individually
Each connector can be removed individually
T568A and B marking with colour codes Flat panel with empty cassettes to be equipped
Equipped with rear cable guide to hold cables with connectors
during maintenance 1 0 337 90 Equipped with 4 automatically removable cassettes,
Supplied with coloured labels takes up to 24 Cat. 5e to Cat. 8 RJ 45 connectors
Compliant with ISO/IEC 11 801, EN 50173 and ANSI/ Empty flat panel to be equipped with cassettes
TIA 568 standards 1 0 337 91 Takes a maximum of 4 automatically removable
cassettes:
Flat panels - copper to be equipped with Cat. 5e to Cat. 8 RJ 45
24 RJ 45 connectors - 1U - PoE++ connectors
1 0 337 70 UTP - fiber optic
1 0 337 72 STP High Density flat panel with empty cassettes to
be equipped with connectors
1 0 337 93 Equipped with 4 High Density cassettes, takes up to
48 Cat. 5e to Cat. 6a RJ 45 connectors
10" flat patch panels - to be equipped
10" panels - 1U
1 0 337 98 Takes up to 6 Cat. 5e to Cat. 8 RJ 45 connectors
1 0 337 99 Takes up to 12 Cat. 5e to Cat. 6a RJ 45 connectors

30
Legrand cabling system, LCS3 cat. 6a Legrand cabling system, LCS3 cat. 6a
angled patch panels to be equipped, connectors accessories

0 337 92
0 337 56 0 337 59 0 337 55 0 337 66

0 337 94
0 337 57 0 337 58

Pack Cat.Nos Common accessories for flat and angled

panels
Port blanking modules
10 0 337 56 Separable blanking plate
0 337 75 For covering 1 to 6 ports or 1 to 12 ports individually
(High Density solutions)
Equipped with new-generation Quick-Fix for automatic (screwless) Cord management
mounting on enclosure and cabinet uprights.
1 0 337 59 2 cable guides to be clipped onto new-generation
Universal mounting on all cabinets or enclosures Quick-Fix
Panels ensure automatic earthing of each connector Provide side cord management
Equipped with four concentric strand guides fixed at the rear Label-holder for identification
Specific accessories for flat panels
Pack Cat.Nos Angled patch panels - to be equipped Cassette for flat panels to be equipped
1 0 337 55 Removable empty cassette to be equipped with
19" panels - 1U connectors, takes 6 Cat. 5e to Cat. 8 connectors
Angled patch panel to be equipped with Can be removed by simple pressing on the cassette,
connectors for ease of installation and maintenance
1 0 337 92 Takes up to 24 Cat. 5e to Cat. 8 RJ 45 connectors For equipping flat panels
High Density angled panel to be equipped with Cassette with shutters for flat panels to be
connectors equipped
1 0 337 94 Takes up to 48 Cat. 5e to Cat. 6a RJ 45 connectors
1 0 337 66 Removable empty cassette to be equipped with
connectors, takes 6 Cat. 5e to Cat. 8 connectors
Cat. 6a High Density RJ 45 connectors Can be removed by simple pressing on the cassette,
for ease of installation and maintenance
Quick-connect connection (no tools required) Equipped with 6 individual shutters to protect RJ 45
T568A and B marking with colour codes connectors contacts
Compliant with ISO/IEC 11 801, EN 50173 and ANSI/ For equipping flat panels
TIA 568 standards
To be installed in cassettes for flat panels or directly High Density cassette for flat panels to be
in an angled panel or a zone distribution box to be equipped
1 0 337 95 Removable empty cassette to be equipped with
equipped connectors, takes 12 Cat. 5e to Cat. 6a connectors
Set of 6 RJ 45 connectors Can be removed by simple pressing on the cassette,
6 0 337 73 UTP for ease of installation and maintenance
6 0 337 75 STP For equipping flat panels
Blanking cassette
1 0 337 57 To be used to fill gaps in the panel
Specific accessory for angled panels
Cover
1 0 337 58 Optimises air flow management in the enclosure

31
Legrand cabling system, LCS3 cat. 6a and cat. 7
cables and cords

Easy grip

0 327 77 0 517 82

Pack Cat.Nos Cat. 6a cables for local networks Pack Cat.Nos Cat. 6a RJ 45 patch cords and user cords
Performance 500 MHz RJ 45/RJ 45 - flat
4 twisted pair cables, 100 Ω With special "easy grip" plug
LSZH sheath: zero halogen Compliant with ISO/IEC 11 801, EN 50173 and ANSI/
PVC
ANSI/TIA colour code TIA 568 standards
Compliant with ISO/IEC 11 801, EN 50173 and ANSI/
TIA 568 standards Unscreened U/UTP, impedance 100 Ω
LSZH 1 0 518 82 Length 1 m
Products conforming to the CPR regulations 1 0 518 83 Length 2 m
U/UTP - 4 pairs 1 0 518 84 Length 3 m
5001 0 327 87 Length 500 m. Supplied on reel. Weight 35 kg 1 0 518 85 Length 5 m
Euroclass Dca LSZH
5001 0 328 28 Length 500m. Supplied on reel. Weight 36 kg
Euroclass Cca
5001 0 328 38 Length 500m. Supplied on reel. Weight 33kg 1 0 518 78 Length 1 m
Euroclass B2ca 1 0 518 79 Length 2 m
1 0 518 80 Length 3 m
F/UTP - 4 pairs 1 0 518 81 Length 5 m
5001 0 327 78 Length 500 m. Supplied on reel. Weight 29.2 kg
Euroclass Dca
F/UTP - 2 x 4 pairs 1 0 518 74 Length 1 m
5001 0 328 78 Length 500 m. Supplied on reel. Weight 58 kg 1 0 518 75 Length 2 m
Euroclass Dca 1 0 518 76 Length 3 m
1 0 518 77 Length 5 m
F/FTP - 4 pairs PVC
5001 0 328 83 Length 500 m. Supplied on reel. Weight 32 kg
Euroclass Cca Shielded S/FTP, impedance 100 Ω
5001 0 327 99 Length 500 m. Supplied on reel. Weight 26 kg 1 0 518 48 Length 0.3 m
Euroclass Dca 1 0 518 16 Length 0.5 m
F/FTP - 2 x 4 pairs
5 0 517 80 Length 1 m
5001 0 327 98 Length 500 m. Supplied on reel. Weight 62 kg
5 0 517 81 Length 2 m
Euroclass Dca
5 0 517 82 Length 3 m
5 0 517 83 Length 5 m
U/FTP - 4 pairs 1 0 518 49 Length 10 m
5001 0 328 84 Length 500 m. Supplied on reel. Weight 39 kg LSZH
Euroclass Cca
Cat. 7 cables for local networks 1 0 518 70 Length 1 m
Performance 600 MHz 1 0 518 71 Length 2 m
4 twisted pair cables, 100 Ω 1 0 518 72 Length 3 m
LSZH sheath: zero halogen 1 0 518 73 Length 5 m
ANSI/TIA colour code
LSZH Compliant with ISO/IEC 11 801 and EN 50173
standards 1 0 518 66 Length 1 m
Products conforming to the CPR regulations
1 0 518 67 Length 2 m
1 0 518 68 Length 3 m
S/FTP - 4 pairs 1 0 518 69 Length 5 m
5001 0 328 82 Length 500 m. Supplied on reel. Weight 33 kg
Euroclass B2 ca Cat. 6a RJ 45 patch cords and user cords -
5001 0 328 49 Length 500m. Supplied on reel. Weight 31 kg High Density
Euroclass Cca
5001 0 327 77 Length 500 m. Supplied on reel. Weight 30 kg RJ 45/RJ 45 - flat
Euroclass Dca With special "easy grip" plug
Compliant with ISO/IEC 11 801, EN 50173 and ANSI/
S/FTP - 2 x 4 pairs LSZH
TIA 568 standards
5001 0 327 79 Length 500 m. Supplied on reel. Weight 63 kg
Euroclass Dca Shielded S/FTP, impedance 100 Ω
1 0 515 50 Length 0.5 m
Cat. 7 indoor/outdoor cable for local 1 0 515 51 Length 1 m
networks 1 0 515 52 Length 2 m
1 0 515 53 Length 3 m
Performance 600 MHz 1 0 515 54 Length 5 m
4 twisted pair cable, 100 Ω
LSZH sheath: zero halogen Marking kit
ANSI/TIA colour code
LSZH Compliant with ISO/IEC 11 801 and EN 50173
200 0 518 90 Kit of 200 coloured rings for marking RJ 45 cords
standards 4 colors (green/red/yellow/blue). 50 pieces of each
Product conforming to the CPR regulations color
Rings to be clipped onto the patch cords
S/FTP - 4 pairs - indoor/outdoor 1: in metre(s)
5001 0 338 90 Length 500 m. Supplied on reel. Weight 26 kg
Euroclass Eca

32
Legrand cabling system, LCS³ fiber optic
19" fiber optic drawers

0 321 62 0 321 72 0 321 00

0 321 01 0 321 15 0 321 34 0 321 11

Pack Cat.Nos Equipped 19" fiber optic drawers Pack Cat.Nos Fiber optic blocks
Metal 19" pre-equipped fiber optic drawers, 4 cable To be clipped directly onto modular fiber optic
entries, supplied with screw fixing kit, 2 cable glands drawers to be equipped Cat.Nos 0 321 00/01 or onto
(Ø 13.5 and 16 mm), coiling system and splice fiber optic splice cassette Cat.No 0 321 41
cassette Single-mode fiber blocks (9/125 μm)
Panel and optical ports marked on dedicated 1 0 321 17 ST block for 6 single-mode fibers
marking area 1 0 321 10 SC duplex block for 6 single-mode fibers
Sliding 1 0 321 11 SC duplex High Density block for 12 single-mode
End stop at a 30° angle fibers
Maximum capacity: 48 fibers in LC version, 24 fibers 1 0 321 12 SC APC duplex block for 6 single-mode fibers
in ST and SC versions 1 0 321 13 LC duplex block for 6 single-mode fibers
Depth 220 mm, height 1 U 1 0 321 14 LC duplex block for 12 single-mode fibers
1 0 321 61 SC duplex for 24 multimode fibers 1 0 321 15 LC duplex High Density block for 24 single-mode
1 0 321 62 LC duplex for 48 multimode fibers fibers
1 0 321 63 ST duplex for 24 multimode fibers 1 0 321 16 LC APC duplex block for 12 single-mode fibers
1 0 321 64 SC duplex for 24 single-mode fibers 1 0 321 33 Single-mode 4 MTP1 feedthrough adaptor, key up/
1 0 321 65 LC duplex for 48 single-mode fibers key down
1 0 321 66 SC APC duplex for 24 single-mode fibers 1 0 321 19 Single-mode 8 MTP1 feedthrough adaptor, key up/
1 0 321 67 LC APC duplex for 48 single-mode fibers key down
Rotating Multimode fiber blocks (62.5 and 50/125 μm)
Supplied with reversible left or right opening 1 0 321 27 ST block for 6 multimode fibers
Maximum capacity: 72 fibers in LC version, 36 fibers
1 0 321 20 SC duplex block for 6 multimode fibers
in SC version
1 0 321 21 SC duplex High Density block for 12 multimode
Depth 260 mm, height 1 U fibers
1 0 321 23 LC duplex block for 6 multimode fibers
1 0 321 71 LC duplex for 72 multimode fibers 1 0 321 24 LC duplex block for 12 multimode fibers
1 0 321 72 SC duplex for 36 multimode fibers 1 0 321 25 LC duplex High Density block for 24 multimode
1 0 321 73 LC duplex for 72 single-mode fibers fibers
1 0 321 74 SC duplex for 36 single-mode fibers 1 0 321 34 Multimode 4 MTP1 feedthrough adaptor, key up/
Flat and angled 19" modular fiber optic key down
1 0 321 18 Multimode 8 MTP1 feedthrough adaptor, key up/
drawers key down
Metal 19" modular fiber optic drawers, 8 cable 1 0 321 36 LC duplex block for 6 multimode fibers - aqua
entries, supplied with 2 cable glands (Ø 13.5 and 1 0 321 37 LC duplex block for 12 multimode fibers - aqua
9 mm), coiling system
Equipped with the new-generation Quick-Fix system RJ 45 copper block for fiber optic drawer
for automatic (screwless) mounting on enclosure or 1 0 321 32 To be clipped directly onto modular fiber optic
cabinet uprights drawers to be equipped Cat.Nos 0 321 00/01
Supplied with numbered labels Allows the mixing of fiber optic and copper
Maximum capacity: 96 fibers in LC version, 48 in SC Takes up to 5 RJ 45 connectors
version or 24 in ST version
Depth 290 mm, height 1U Accessories for fiber optic drawer to be
Sliding, equipped equipped
End stop at a 20° angle Accessory for receipt of a fan-out
1 0 321 02 SC duplex for 24 multimode fibers 1 0 321 28 To be clipped onto the back of the drawer
1 0 321 04 LC duplex for 48 multimode fibers Enables the entry of preterminated links
1 0 321 06 SC duplex for 24 single-mode fibers
Blanking plate
Sliding, to be equipped with fiber optic blocks 1 0 321 29 Blanking plate
Takes any fiber optic block, up to 4 blocks maximum.
End stop at a 20° angle Cassette for pigtails
1 0 321 00 Empty drawer
1 0 321 30 Capacity: 24 fibers
Sliding, to be equipped with fiber optic blocks - Coiling kit
1 0 321 31 1 accessory
angled
Takes any fiber optic block, up to 4 blocks maximum. 1: MTP is a registered trademark of US Conec Ltd
End stop at a 20° angle
1 0 321 01 Empty drawer

33
Legrand cabling system, LCS³ fiber optic
19" High Density fiber optic panels (1/2/4 U) and patching kits

OM5 on request

Panel 0 321 76 equipped with support 0 321 38 0 321 38 0 321 69 0 321 70

and slim cassettes 0 321 69/70

Pack Cat.Nos 19" High Density fiber optic panels Pack Cat.Nos Preterminated MTP1 High Density cassettes
(MPO compatible) (continued)
Panels to be equipped with cassettes
Ultra™ slim cassettes
Equipped with Quick-Fix system for automatic 1 0 321 38 Support for High Density slim cassettes
(screwless) mounting on enclosure or cabinet Takes up to 2 High Density slim cassettes
uprights Cat.Nos 0 321 68/69/70 and up to 2 blanking
To be equipped directly with a maximum of 4 cassettes Cat.No 0 321 39 or 1 cassette + 1 blanking
automatically removable cassettes or 4 supports for cassette
slim cassettes Cat. No 0 321 38 per U Possibility to mix slim single-mode and multimode
Maximum capacity per U: 48 fibers in SC version, cassettes on the same support
24 fibers in ST version or 96 fibers in LC version 1 0 321 69 Slim multimode OM4 cassette (50/125 μm)
2U and 4U versions equipped with door and 12 LC fibers, Universal polarity
cord management at the front, and with cable 1 0 321 68 Slim multimode OM3 cassette (50/125 μm)
management at the back 12 LC fibers, Universal polarity
1 0 321 75 1 U height, depth 182 mm 1 0 321 70 Slim single-mode OS2 cassette (9/125 μm)
1 0 321 76 2 U height, depth 393 mm 12 LC fibers, Universal polarity
1 0 321 77 4 U height, depth 393 mm 1 0 321 39 Slim blanking module to be mounted (x2) on support
Accessories for panels Cat.No 0 321 38 to fill gaps in the panel
1 0 321 78 Front cord management kit for 1 U panel Core™ pre-equipped cassettes
Fits on 1 U modular panel Cat.No 0 321 75
2 side cord guides and front door with integrated For installation in modular panels
marking to ensure correct front and side cord Cat. Nos 0 321 75/76/77 and Zero-U kit Cat.No 0 321 03
management Pre-equipped cassettes with fitted fiber optic block
Cord holder to be mounted on cassette to make it + sets of 6 or 12 OM3 pigtails
easier to pass cords through the side Sliding cassettes which can be removed
1 0 321 46 Rear cable management accessory automatically by simply pressing them, simplifying
Fits on 1 U panel Cat. No 0 321 75 installation and maintenance
1 0 321 28 Accessory for receipt of a fan-out Removable from the front
To be clipped onto the back of the drawer Pre-equipped cassettes for multimode
Enables the entry of preterminated links installation (50/125 μm)
1 0 321 22 Copper cable management accessory 1 0 321 80 Equipped with 1 SC duplex block for 6 fibers
4 0 321 26 Set of 4 cord holders 1 0 321 81 Equipped with 1 LC duplex block for 6 fibers
To be mounted on any cassette to make it easier to 1 0 321 82 Equipped with 1 SC duplex block for 12 fibers
pass cords through the side 1 0 321 83 Equipped with 1 LC duplex block for 12 fibers
1 0 321 05 Rear accessory for fixing 4 cable glands
Pre-equipped cassettes for single-mode
Ultra™ preterminated MTP1 High Density installation (9/125 μm)
cassettes (MPO compatible) 1 0 321 84 Equipped with 1 SC duplex block for 6 fibers
1 0 321 85 Equipped with 1 LC duplex block for 6 fibers
For installation in modular panels 1 0 321 86 Equipped with 1 SC duplex block for 12 fibers
Cat. Nos 0 321 75/76/77 and in Zero-U kit 1 0 321 87 Equipped with 1 LC duplex block for 12 fibers
Cat. No 0 321 03
Slim cassettes to be installed with support Cassettes to be equipped and blanking plate
Cat. No 0 321 38 For installation in modular panels
Sliding cassettes which can be removed Cat. Nos 0 321 75/76/77 and Zero-U kit
automatically by simply pressing them, simplifying Cat. No 0 321 03
installation and maintenance Sliding cassettes which can be removed
Removable from the front and back automatically by simply pressing them, simplifying
Multimode - Insertion Loss Max/Random²: 0.55 dB installation and maintenance
Single-mode - Insertion Loss Max/Random²: 0.6 dB Removable from the front
Prewired, equipped at the rear with one or two male
MTP¹ connectors with 12 fibers Fiber optic splice cassette
LC or SC connectors at the front
1 0 321 41 Takes any modular fiber optic block
Ultra™ cassettes Blanking cassette
1 0 321 42
1 0 337 57 To be used to fill gaps in the panel
Multimode OM4 cassette (50/125 μm)
24 LC fibers, A/C polarity Copper cassette to be equipped
1 0 321 48 Multimode OM4 cassette (50/125 μm) 1 0 321 55 Takes six Cat. 5e, 6 and 6a copper connectors
12 LC fibers, A/C polarity
1 0 321 43 Multimode OM4 cassette (50/125 μm) Patching kits
12 SC fibers, A/C polarity 1 U to 4 U patching kit
1 0 321 59 Multimode OM4 cassette (50/125 μm) 1 0 321 89 Compatible with all LCS³ fiber optic and copper 19"
12 SC fibers, universal panels
1 0 321 44 Single-mode OS2 cassette (9/125 μm) Supplied with top protection, cable guides and
24 LC fibers, A/C polarity specific accessories for installation on cable trays,
1 0 321 49 Single-mode OS2 cassette (9/125 μm) wire meshed cable trays (Cablofil) and cabinets
12 LC fibers, A/C polarity
1 0 321 45 Single-mode OS2 cassette (9/125 μm) Zero-U patching kit
12 SC fibers, A/C polarity 1 0 321 03 To bring few fiber optic or copper connections
1 0 321 60 Single-mode OS2 cassette (9/125 μm) outside 19'' panels
12 SC fibers, universal Takes 1 cassette (fiber optic preterminated
cassettes, pre equipped cassettes, fiber optic splice
1: MTP is a registered trademark of US Conec Ltd
2: When mated with the same Legrand range (Ultra & Core) trunks
cassette or RJ 45 copper cassette)
and patch cords Supplied with a comprehensive range of
accessories for fixing in or outside enclosures
(raised access floors, cable trays, walls, ceiling)

34
Legrand cabling system, LCS³ fiber optic
19" UHD1 fiber optic drawers

0 321 50 0 321 90

0 321 55 0 321 56 0 321 94

Pack Cat.Nos UHD¹ modular fiber optic drawers, to be Pack Cat.Nos UHD¹ modular fiber optic drawers, to be
equipped with 12-fiber cassettes equipped with 8-fiber cassettes
Fixed modular chassis for holding cassettes Fixed modular chassis for holding cassettes
4 U maximum capacity (holds up to 48 cassettes): 4 U maximum capacity (holds up to 72 cassettes):
576 LC fibers - 576 LC fibers
2 U maximum capacity (holds up to 24 cassettes): 2 U maximum capacity (holds up to 36 cassettes):
288 LC fibers - 288 LC fibers
1 U maximum capacity (holds up to 12 cassettes): 1 U maximum capacity (holds up to 18 cassettes)
144 LC fibers - 144 LC fibers
Fiber optic drawer with cord management at the Fiber optic drawers with cord management at the
front for 12-fiber cassettes front and back for 8-fiber cassettes
1 0 321 51 1U Depth: 595 mm
Fiber optic drawers with cord management at the 1 0 321 90 1 U
front and back for 12-fiber cassettes 1 0 321 91 2 U
Depth: 595 mm 1 0 321 92 4 U
1 0 321 50 1U
1 0 321 52 2U
UHD¹ 8-fiber cassettes
1 0 321 53 4U Clip directly into fiber optic drawers
Cat.Nos. 0 321 90/91/92
UHD¹ 12-fiber cassettes Cassettes slide into above chassis
Clip directly into fiber optic drawers Cassettes can be removed from the front and back
Cat.Nos. 0 321 50/51/52/53 MPO high-performance cassettes
Cassettes slide into above chassis Low insertion loss < 0.35 dB
Cassettes can be removed from the front and back Universal polarity
MPO high-performance cassettes Multimode OM4 cassettes (50/125 μm)
Low insertion loss < 0.35 dB For 50/125 μm multimode installation, OM4 type
A/C polarity
1 0 321 93 MPO cassette (MTP2 compatible)
Multimode OM4 cassettes (50/125 μm) 8 OM4 LC fibers, universal polarity
For 50/125 μm multimode installation, OM4 type
Single-mode OS2 cassette (9/125 μm)
1 0 321 54 MPO cassette (MTP2 compatible) For 9/125 μm single-mode installation, OS2 type
12 OM4 LC fibers, polarity A/C 1 0 321 94 MPO cassette (MTP2 compatible)
Single-mode OS2 cassette (9/125 μm) 8 OS2 LC fibers, universal polarity
For 9/125 μm single-mode installation, OS2 type
1 0 321 55 MPO cassette (MTP2 compatible) Adaptors for 8-fiber UHD¹ installation
12 OS2 LC fibers, polarity A/C Clip into UHD¹ fiber optic drawers for 8-fiber
cassettes Cat.Nos 0 321 90/91/92
Adaptors for 12-fiber UHD¹ installation
MPO adaptors (MTP2 compatible)
Clip into UHD¹ fiber optic drawers for 12-fiber 1 0 321 95 Multimode 4 MTP2 adaptor - key up/key down
cassettes Cat.Nos 0 321 50/51/52/53 1 0 321 96 Single-mode 4 MTP2 adaptor - key up/key down
MPO adaptors (MTP2 compatible) LC adaptors
0 321 56 Multimode 4 MTP² adaptor - key up/key down 1 0 321 97 8 LC multimode adaptor
1 0 321 57 Single-mode 4 MTP² adaptor - key up/key down 1 0 321 98 8 LC single-mode adaptor
LC adaptor
1 0 321 99 8 LC-APC single-mode adaptor
1 0 321 58 12 LC multimode adaptor 1: Ultra High Density
2: MTP is a registered trademark of US Conec Ltd

35
Legrand cabling system, LCS³ fiber optic
cables

OM5 on request

0 325 13 0 325 10

0 326 66

Colour code: FOTAG

Compliant with EN 50173-2 and ISO IEC 11801 standards
Packed on a 2000 m reel except for tight-buffer OM4
Tight-buffer: "easy strip"
Other configurations on request

Pack Cat.Nos Single-mode OS2 fiber optic cables Pack Cat.Nos Multimode OM3 fiber optic cables
(9/125 µm) - (OS1 compatible) (50/125 µm)
For 9/125 µm single-mode installations, For 50/125 µm multimode installations,
OS2 type OM3 type
Suitable for 10 Gb Ethernet networks
Indoor/Outdoor Bend insensitive
Loose Tight- Yellow LSZH sheath
tube buffer
Glass strands Indoor/Outdoor
900 µm Loose Tight- Aqua LSZH sheath
20001 0 325 02 4 fibers - Euroclass Dca tube buffer
Glass strands
20001 0 325 12 6 fibers - Euroclass Dca 900 µm
20001 0 325 03 8 fibers - Euroclass Dca Euroclass Dca
20001 0 325 14 0 325 50 12 fibers - Euroclass Dca
20001 0 325 37 4 fibers
20001 0 325 26 12 fibers - Euroclass Cca
20001 0 325 10 6 fibers
20001 0 325 51 24 fibers - Euroclass Dca
20001 0 325 38 8 fibers
20001 0 325 39 0 325 11 12 fibers
10001 0 325 18 24 fibers - Euroclass Cca 20001 0 325 53 0 325 52 24 fibers
Outdoor Outdoor
Black PE sheath Black PE sheath
Glass strands for rodent-proofing, Glass strands for rodent-proofing,
reinforced with corrugated steel reinforced with corrugated steel
20001 0 325 23 4 fibers 20001 0 325 40 8 fibers
20001 0 325 13 6 fibers 20001 0 325 41 12 fibers
20001 0 325 24 8 fibers 20001 0 325 42 24 fibers
20001 0 325 15 12 fibers
20001 0 325 25 24 fibers 1: in metre(s)

Multimode OM4 fiber optic cables

(50/125 µm)
For 50/125 µm multimode installations,
OM4 type
Suitable for 10 Gb Ethernet networks
Bend insensitive
Indoor/Outdoor
Loose Tight- Aqua LSZH sheath
tube buffer
900 µm Glass strands
20001 0 325 43 4 fibers - Euroclass Dca
5001 0 326 65 6 fibers - Euroclass Dca - 500 m drum
10001 0 326 66 6 fibers - Euroclass Dca - 1000 m drum
20001 0 325 44 8 fibers - Euroclass Dca
20001 0 325 45 12 fibers - Euroclass Dca
20001 0 325 49 12 fibers - Euroclass Cca
10001 0 326 67 12 fibers - Euroclass Dca - 1000 m drum
10001 0 326 68 24 fibers - Euroclass Dca - 1000 m drum
10001 0 325 19 24 fibers - Euroclass Cca - 1000 m drum
Outdoor
Black PE sheath
Glass strands for rodent-proofing,
reinforced with corrugated steel
20001 0 325 46 4 fibers
20001 0 325 47 8 fibers
20001 0 325 48 12 fibers

36
Legrand cabling system, LCS³ fiber optic Legrand cabling system, LCS³ fiber optic
preterminated links High Density preterminated links

OM4 and OM5 on request OM4 and OM5 on request

1 320 41 0 324 41

Supplied with pulling element. In coil up to 50 m, on a small drum Supplied on a drum

between 51 m and 150 m, on a large drum over 151 m and up to 200 m Micro cables for high density cassettes
Connection in fiber optic drawers. OM3 aqua LSZH sheaths. Supplied Aqua (OM3) and yellow (OS2) LSZH sheaths
with test reports Supplied with test reports (photometry)
Possible to obtain customised preterminated links: cable type, Other configurations on request
structure, length, connector type, etc

Pack Cat.Nos Core™ SC/SC tight-buffer OM3 links Pack Cat.Nos Ultra™ Fan-out/Fan-out preterminated High
Density fiber optic links
6 SC simplex - 6 SC simplex
1 1 320 01 Length 10 m With fan-out (2 mm output) for secure transition
1 1 320 02 Length 20 m between the cable and the ends
1 1 320 03 Length 30 m Low insertion loss for LC connector < 0.15 dB/
1 1 320 04 Length 40 m connector
1 1 320 05 Length 50 m Fan-out/Fan-out OM3 micro cables
1 1 320 06 Length 60 m Description Length (m)
1 1 320 07 Length 70 m 1 0 324 01 6 LC duplex - 6 LC duplex 10
1 1 320 08 Length 80 m 1 0 324 02 6 LC duplex - 6 LC duplex 20
1 1 320 09 Length 90 m 1 0 324 03 6 LC duplex - 6 LC duplex 30
1 1 320 10 Length 100 m 1 0 324 04 6 LC duplex - 6 LC duplex 40
1 1 320 12 Length 120 m 1 0 324 05 6 LC duplex - 6 LC duplex 50
1 1 320 14 Length 140 m 1 0 324 11 12 LC duplex - 12 LC duplex 10
1 1 320 16 Length 160 m 1 0 324 12 12 LC duplex - 12 LC duplex 20
1 1 320 18 Length 180 m 1 0 324 13 12 LC duplex - 12 LC duplex 30
1 1 320 20 Length 200 m 1 0 324 14 12 LC duplex - 12 LC duplex 40
12 SC simplex - 12 SC simplex 1 0 324 15 12 LC duplex - 12 LC duplex 50
1 1 320 21 Length 10 m Fan-out/Fan-out OS2 micro cables
1 1 320 22 Length 20 m Description Length (m)
1 1 320 23 Length 30 m 1 0 324 21 6 LC duplex - 6 LC duplex 10
1 1 320 24 Length 40 m 1 0 324 22 6 LC duplex - 6 LC duplex 20
1 1 320 25 Length 50 m 1 0 324 23 6 LC duplex - 6 LC duplex 30
1 1 320 26 Length 60 m 1 0 324 24 6 LC duplex - 6 LC duplex 40
1 1 320 27 Length 70 m 1 0 324 25 6 LC duplex - 6 LC duplex 50
1 1 320 28 Length 80 m 1 0 324 31 12 LC duplex - 12 LC duplex 10
1 1 320 29 Length 90 m 1 0 324 32 12 LC duplex - 12 LC duplex 20
1 1 320 30 Length 100 m 1 0 324 33 12 LC duplex - 12 LC duplex 30
1 1 320 32 Length 120 m 1 0 324 34 12 LC duplex - 12 LC duplex 40
1 1 320 34 Length 140 m 1 0 324 35 12 LC duplex - 12 LC duplex 50
1 1 320 36 Length 160 m
1 1 320 38 Length 180 m Ultra™ MTP¹/MTP¹ High Density
1 1 320 40 Length 200 m preterminated fiber optic links
Core™ LC/LC tight-buffer OM3 links For connecting cassettes in High Density fiber optic
panels and Ultra High Density drawers
6 LC simplex - 6 LC simplex Female MTP1, A polarity
1 1 320 41 Length 10 m Low insertion loss for MTP1 connector < 0.35 dB/
1 1 320 42 Length 20 m connector
1 1 320 43 Length 30 m
1 1 320 44 Length 40 m MTP1 OM3 micro cables
1 1 320 45 Length 50 m Description Length (m)
1 1 320 46 Length 60 m 1 0 324 41 12 MTP1 -MTP1 fiber optics 10
1 1 320 47 Length 70 m 1 0 324 42 12 MTP1 -MTP1 fiber optics 20
1 1 320 48 Length 80 m 1 0 324 43 12 MTP1 -MTP1 fiber optics 30
1 1 320 49 Length 90 m 1 0 324 44 12 MTP1 -MTP1 fiber optics 40
1 1 320 50 Length 100 m 1 0 324 45 12 MTP1 -MTP1 fiber optics 50
1 1 320 52 Length 120 m MTP1 OS2 micro cables
1 1 320 54 Length 140 m Description Length (m)
1 1 320 56 Length 160 m 1 0 324 51 12 MTP1 -MTP1 fiber optics 10
1 1 320 58 Length 180 m 1 0 324 52 12 MTP1 -MTP1 fiber optics 20
1 1 320 60 Length 200 m 1 0 324 53 12 MTP1 -MTP1 fiber optics 30
12 LC simplex - 12 LC simplex 1 0 324 54 12 MTP1 -MTP1 fiber optics 40
1 1 320 61 Length 10 m 1 0 324 55 12 MTP1 -MTP1 fiber optics 50
1 1 320 62 Length 20 m 1: MTP is a registered trademark of US Conec Ltd
1 1 320 63 Length 30 m
1 1 320 64 Length 40 m
1 1 320 65 Length 50 m
1 1 320 66 Length 60 m
1 1 320 67 Length 70 m
1 1 320 68 Length 80 m
1 1 320 69 Length 90 m
1 1 320 70 Length 100 m
1 1 320 72 Length 120 m
1 1 320 74 Length 140 m
1 1 320 76 Length 160 m
1 1 320 78 Length 180 m
1 1 320 80 Length 200 m

37
Legrand cabling system, LCS³ fiber optic Legrand cabling system, LCS³ fiber optic
CoreTM fiber patch cords UltraTM fiber patch cords

0 326 13 0 325 34

Fitted at each end with 2 connectors with ceramic ferrule Fitted at each end with 2 connectors with ceramic ferrule
Individually packed and tested (report supplied) Individually packed and tested (report supplied)
Max. optical losses/Master: 0.25 dB Max. optical losses/Master: 0.15 dB
LSZH Zipcord sheath LSZH Zipcord sheath

Pack Cat.Nos OS2 single-mode fiber optic cords (9/125 μm) Pack Cat.Nos OS2 single-mode fiber optic cords (9/125 μm)
For 9/125 μm single-mode installations, OS2 type For 9/125 μm single-mode installations, OS2 type
Yellow sheaths Yellow sheaths
SC/SC duplex cords SC/SC duplex cords
3 0 326 00 Length: 1 m 5 0 325 27 Length: 1 m
3 0 326 01 Length: 2 m 5 0 325 28 Length: 2 m
3 0 326 02 Length: 3 m 5 0 325 29 Length: 3 m
SC/LC duplex cords SC/LC duplex cords
3 0 326 03 Length: 1 m 5 0 325 30 Length: 1 m
3 0 326 04 Length: 2 m 5 0 325 31 Length: 2 m
3 0 326 05 Length: 3 m 5 0 325 32 Length: 3 m
LC/LC duplex cords LC/LC duplex cords
3 0 326 28 Length: 0.5 m 5 0 325 33 Length: 1 m
3 0 326 06 Length: 1 m 5 0 325 34 Length: 2 m
3 0 326 07 Length: 2 m 5 0 325 35 Length: 3 m
3 0 326 08 Length: 3 m 5 0 325 36 Length: 5 m
3 0 326 29 Length: 5 m LC/LC Uniboot duplex cords
OM3 multimode fiber optic cords (50/125 μm) Reversible polarity
3 0 326 86 Length: 1 m
For 50/125 μm multimode installations, OM3 type 3 0 326 87 Length: 2 m
Aqua sheaths 3 0 326 88 Length: 3 m
3 0 326 89 Length: 5 m
SC/SC duplex cords 3 0 326 92 Length: 10 m
3 0 326 09 Length: 1 m
3 0 326 10 Length: 2 m OM4 multimode fiber optic cords (50/125 μm)
3 0 326 11 Length: 3 m
For 50/125 μm multimode installations, OM4 type
SC/LC duplex cords Aqua sheaths
3 0 326 12 Length: 1 m
3 0 326 13 Length: 2 m SC/SC duplex cords
3 0 326 14 Length: 3 m 3 0 326 30 Length: 1 m
3 0 326 31 Length: 2 m
LC/LC duplex cords 3 0 326 32 Length: 3 m
3 0 326 15 Length: 1 m
3 0 326 16 Length: 2 m LC/LC duplex cords
3 0 326 17 Length: 3 m 3 0 326 33 Length: 0.5 m
3 0 326 34 Length: 1 m
OM4 multimode fiber optic cords (50/125 μm) 3 0 326 35 Length: 2 m
3 0 326 36 Length: 3 m
For 50/125 μm multimode installations, OM4 type 3 0 326 37 Length: 5 m
Aqua sheaths LC/LC Uniboot duplex cords
SC/SC duplex cords Reversible polarity
5 0 322 60 Length: 1 m 3 0 326 95 Length: 0.5 m
5 0 322 61 Length: 2 m 3 0 326 96 Length: 1 m
5 0 322 62 Length: 3 m 3 0 326 97 Length: 2 m
3 0 326 98 Length: 3 m
SC/LC duplex cords 3 0 326 99 Length: 5 m
5 0 322 63 Length: 1 m
5 0 322 64 Length: 2 m
5 0 322 65 Length: 3 m
LC/LC duplex cords
5 0 322 66 Length: 1 m
5 0 322 67 Length: 2 m
5 0 322 68 Length: 3 m

38
Legrand cabling system, LCS³ fiber optic Legrand cabling system, LCS³ fiber optic
pigtails, glue-on connectors and fan-out units case and quick-connect connectors

OM5 on request

0 322 20 0 322 31
0 322 70

Pack Cat.Nos Core™ pigtails

LSZH 0 322 72 0 322 73 0 322 75
For making quick, reliable and high-
performance fiber optic cable connections
on site:
- OM2/OM3/OM4 IL Typical/Master =
0.15 dB
- OS2 IL Typical/Master = 0.18 dB 0 322 83 0 322 81 0 322 85
Compatible with all commercially-available
splicers
1m 2m 50/125 µm - OM3 (PC) Pack Cat.Nos Tool case for preparing optical fiber for
1 0 322 20 0 322 23 SC connectors quick-connect fiber optic connectors
1 0 322 21 0 322 24 LC connectors
1 0 322 22 ST connectors 1 0 322 70 Provides the tools required for preparing optical
cables, for carrying out initial tests of the connection
50/125 µm - OM4 (PC) of fibers to connectors and accessories for easy
1 0 322 30 0 322 33 SC connectors connection in all situations
1 0 322 31 0 322 34 LC connectors Comprises:
1 0 322 32 ST connectors - Precision cleaver
9/125 µm - OS2 (APC or UPC) - OS1 - Kevlar stripping and cutting tool
compatible - Visual fault locator
1 0 322 40 0 322 45 SC-APC connectors - Installation instructions and video
1 0 322 41 0 322 46 SC-UPC connectors - Accessories (cleaners, felt tip pen, bin, etc)
1 0 322 42 0 322 48 LC-APC connectors
1 0 322 43 0 322 47 LC-UPC connectors Quick-connect connectors
1 0 322 44 0 322 49 ST-UPC connectors
Connection can be made with case Cat.No 0 322 70
Sets of 12 LC pigtails Quick-connect, reliable and reusable up to 5 times
To be used to lock the fiber inside the connector
1m length - 12 different colors An indicator light is used to test the connection
1 0 326 24 12 OS2 LC-UPC pigtails No glue or polishing needed
1 0 326 26 12 OM3 LC-UPC pigtails Can be installed on 900 µm fiber optics
1 0 326 71 12 OM4 LC-UPC pigtails For 250 µm fiber, use the special tubes supplied with
the connectors; typical IL: multimode OM3/OM4 =
Heat-shrinkable sleeve for pigtails 0.1 dB and single-mode OS2 = 0.2 dB (PC) and
1 0 327 44 40 mm - pack of 50 sleeves 0.3 dB (APC)
OM3/OM4 multimode connectors
50/125 and 62,5/125 µm glue-on Set of 12 connectors
connectors 12 0 322 71 LC PC 50/125 µm, 900/250 µm
Supplied with 900 µm sleeve 12 0 322 72 SC PC 50/125 µm, 900/250 µm
Connectors with ceramic ferrule OS2 single-mode connectors
Typical attenuation: 0.3 dB Set of 12 connectors
10 0 331 47 SC connectors 12 0 322 73 LC UPC 9/125 µm, 900/250 µm
10 0 331 00 LC connectors 12 0 322 74 SC UPC 9/125 µm, 900/250 µm
12 0 322 75 SC APC 9/125 µm, 900/250 µm
Fan-out units
For 900 µm sheathing of optical fibers Precision cleaver for updating case
Take 250 µm fiber diameters Cat.Nos 0 326 90
1 0 330 48 6-fiber fan-out unit 1 0 322 80 Enables precision-cutting of fiber optics and the use
1 0 330 49 12-fiber fan-out unit of quick-connect connectors Cat.Nos 0 322 71 to
0 322 75 with case Cat.No 0 326 90
Fiber optic cleaning accessories
1 0 322 83 MPO/MTP1 ferrule cleaner
1 0 322 81 LC ferrule cleaner (PC/APC)
1 0 322 82 SC ferrule cleaner (PC/APC)
1 0 322 84 LC replacement cartridge
1 0 322 85 SC replacement cartridge
1 0 322 76 Fiber stripper
1 0 322 77 Wipes
1 0 322 78 Cleaning spray
1: MTP is a registered trademark of US Conec Ltd

39
MEETING ALL
YOUR DIGITAL
INFRASTRUCTURE
REQUIREMENTS!
CHALLENGES STRUCTURED
IN STRUCTURED CABLING
CABLING SOLUTIONS
A structured cabling system that has been designed and Pre-assembled solutions have become the norm. Multi-
deployed effectively will include all the necessary cables fibre cables usually with 12 or 24 fibers end on 12-fiber
and hardware to form a complete telecommunications MPO/MTP® connectors or LC or SC duplex connectors.
infrastructure. Pre-terminated cables simplify and allow much faster
The type of structured cabling your data center needs installation and provisioning of necessary connections
will be determined by various factors, including the even during operation. When the new servers, switches,
services you offer (bandwidth needs), your existing or other active equipment are installed or moved, the
network equipment, and its layout. The top priorities for cables are already in place and ready for connection.
data centers are to ensure the network infrastructure is Pre-assembled systems are not limited to fiber optic
flexible, scalable, secure, and has the shortest possible cables. Pre-assembled solutions for copper cables are
business interruptions. Planning the network structure also becoming increasingly popular as trunk-solutions
and selecting the right products to meet current and with jacks on both ends or as multi-patch trunks for fast
future requirements is a considerable challenge, and and easy connection.
good quality structured cabling components are
essential.
PACE
WHITE S

STRUCTU
D RE
CABLING
SOLUT IONS FIND ALL OUR SOLUTIONS FOR
STRUCTURED CABLING IN THE CATALOGUE

RELIABLE,
EFFICIENT,
POWERED SCALABLE
BY SPECIA DATA CENTE
LIST BRAND R SOLUT
S IONS
 WE HAVE
SOLUTIONS FOR
EVERY AREA
DIFFERENT AND WE ARE HAPPY
SOLUTIONS TO SUPPORT YOU
FOR DIFFERENT As a specialist in data center solutions and structured
CABLING AREAS cabling, we offer you a comprehensive portfolio of
solutions that can meet all your digital infrastructure
requirements. In order to make this clearer and more
Within the data centers, different areas have different intuitive, this catalogue is divided into precisely these
requirements for density, performance, and technology. core areas - we will be happy to advise and support
The increasing demand for bandwidth and the rapid you in making the right product selection if required.
changes in active equipment technology and interfaces
are also setting new standards for structured cabling
inside and outside the boundaries of the data center. The
requirements for the main connection points of several
data centres and the connection points to the outside ADVANCED
world are completely different in many situations than MEET-ME ROOM CONNECTIVITY
in the classic white space of a data center.

LEGRAND
DATA CENTER
SOLUTIONS
DATA CENTER HIGH-
STRUCTURED PERFORMANCE
CABLING SOLUTION COMPUTING
 A variety of needs
covered!

GLOBAL ADVANTAGES PRODUCT CRITERIA

PRE-TERMINATED FIBER
EASY & FAST MODULARITY VERY HIGH
& SPLICE & COPPER
INSTALLATION & SCALABILITY FLEXIBILITY
SOLUTIONS SOLUTIONS

MEET-ME
ROOM

ADVANCED
CONNECTIVITY

DATA CENTER
STRUCTURED
CABLING
SOLUTION

HIGH-
PERFORMANCE
COMPUTING

42 STRUCTURED CABLING SOLUTIONS WHITE SPACE

 PRODUCT CRITERIA CUSTOMER ADVANTAGES

CONNECTION
25-YEAR
PASSIVE FIBER PASSIVE FIBER SOLUTIONS READY SOLUTIONS READY TO PROVIDERS
SERVICE & WARRANTY FOR
SOLUTIONS WITH SOLUTIONS WITH FOR NEW DD FOR BANDWIDTH AND/OR OTHER
SUPPORT APPLICATION &
HIGHEST DENSITY HIGHEST QUALITY TRANSCEIVER 400G+ BUILDINGS / DATA
PERFORMANCE
CENTERS

STRUCTURED CABLING SOLUTIONS WHITE SPACE 43

 Datacenter-January-2023

Headquarters
128, avenue de Lattre de Tassigny
87045 Limoges Cedex
France
Tel.: + 33 (0) 5 55 06 87 87
Fax: + 33 (0) 5 55 06 88 88