PRODUCTS OVERVIEW
CERTIFICATION, TROUBLESHOOTING and INSTALLATION tools
for professionals who install and maintain critical network cabling infrastructure.
Featured Copper Cable Test Solutions
www.flukenetworks.com/CopperTestingTools
CableIQ™ Qualification MicroScanner2 TS®100 Cable Fault Finder MicroMapper™
Tester Cable Verifier • Measure • Simple verification
• Works on live • Displays cable cable of wiremaps and
networks to provide length, wiremap, length on identification of
Ethernet switch cable ID, and spools faults with LEDs
detection and link distance to fault • Numeric • Tests twisted pair
configuration • Detects Ethernet, distance display cables for open
• Measure cabling POTS and PoE • Identify pairs with SmartTone™ circuits, shorts,
performance • Locates virtually any cable generation technology crossed pairs,
(10/100/1000 Mbps) or wire pair with IntelliTone™ • Identify and locate distance reversed pairs and
• Diagnose opens, shorts, digital and analog toning to opens and shorts split pairs
split pairs, insertion loss, • Tests RJ11, RJ45, coax, with no • Works on any two or more • Remote identifier enables
crosstalk, noise issues adapters conductor cable up to one-person testing
• Graphically maps wiring • “Oversized” backlit LCD makes 3,000 feet (915 meters) • Built-in tone generator for
configuration and shows results crystal clear in any tracing installed cables
distance to faults work environment hidden in walls, floors and
• Tests twisted-pair, coax, ceilings. Works with
and audio Pro3000™ Tone and Probe
(sold separately)
• Locate and trace cables with
IntelliTone 200 Digital Probe
(included with CIQ-KIT)
Fiber Fault Location, Power Meters, and Light Sources
www.flukenetworks.com/FiberInspectionTools
MultiFiber™ Pro SimpliFiber ® Pro Power Fiber QuickMap™ / VisiFault™
MPO Tester Meter / Light Source OneShot™ PRO Visual Fault Locator
• Automatic • Multiple kit • Quickly and • Locates tight bends,
scanning and configurations efficiently locate breaks and bad
testing of all with light sources connections and connectors
fibers in MPO for single mode, breaks • Verifies polarity and
connectors multimode and • QuickMap tests identifies fibers
• MM and SM PON fiber optics MM fiber to 1,500 • Bright red visible
versions • Single-port, simul- meters (4,921 ft) laser light with
available taneous dual-wavelength • OneShot PRO tests SM fiber to continuous and
• No more fan-out cords when feature completes testing in 23 km (15 mi) flashing modes
testing MPO fiber trunks half the time and saves • Simple set-up • Ergonomic case
• Easily interpret test results measurements from both survives drops, impacts
wavelengths into one record • Six-second test time—
on 8 or 12 fibers with minimal eliminates lengthy blind and vibration
navigation • Min/Max capability automates troubleshooting
• Automatically measures and tracking of intermittent
power fluctuations • Large display shows loss in dB
reports polarity and distance in meters or feet
Copper Cable Toners and Probes
Copper Cable Toners and Probes
www.flukenetworks.com/CopperTestingTools
Pro3000™ Analog Tone and Probe
• Tone and trace on non-active
networks
• Identify exact pair with
SmartTone technology and
five distinct tones
Pro 3000 Intelli- Micro- TS100 MS2-100 CIQ-100
• Loud speaker on probe easy tone Pro Mapper
to hear through drywall, wood, and other material
Port Location ID
• Clips allow easy access to individual pairs and
Digital Toning 3 3 3
RJ11 easily connects to telephone jacks—no need
for adapters Analog Toning 3 3 3 3 3 3
Switch Presence 3 3 3
VDV Service Detection 3 3
IntelliTone Pro 200 LAN Tone and Probe
™ Cable Verification
Cable Wiremap 3 3 Graphical Graphical
• Digital toning eliminates noise and
false signals Cable Length 3 3 3
• SmartTone™ analog toning isolates Qualified Cabling Speed
3
(10/100/1000/VoIP)
individual wire pairs
Cable Troubleshooting
• Locates cables safely and
effectively on active networks Identify open/short 3 3 3 3 3 3
• Visible end-to-end continuity test Distance to open/short 3 3 3
• Built in wire mapper Locate crosstalk fault 3
• Works on twisted pair, audio, and video cabling Identify and locate
3
impedance fault
Fiber Cleaning and Inspection
www.flukenetworks.com/FiberInspectionTools
Fiber Optic Cleaning Kits FI-500 FiberInspector™ Quick Clean™ Cleaners Test Reference Cords
• Eliminates Micro • Available (TRCs)
the #1 • PortBright™ in 1.25 mm, • Used for
cause illumination 2.5 mm, and certifying
of fiber to find ports MPO styles cabling
optic link in dark and • Just push systems in
failure: dense panels and the accordance with standards
contamination • Auto-focus for “click” lets you • Reference grade connectors
• Supports all fiber connector stable images in know it’s done
types in datacenter and seconds • Clean over 500 end-faces
campus environments per unit Fiber Launch Cables
• Clearly displays MM and SM
• Quick Cleaners—easily clean • Tip extender to 208 mm for • Used with
• Includes 4 UPC tips (LC, SC,
fiber end-faces and ports hard to reach connectors OTDRs to
1.25 mm and 2.50 mm)
• Solvent pen precisely dispens- characterize
• APC tips available fiber links
es specially formulated fiber
optic cleaning solution • Standards
• Cards for convenient cleaning compliant
of fiber end-face reference grade connectors
Termination Tools
www.flukenetworks.com/TerminationTools
Termination Tools
and Adapters
Ergonomic design, high-quality
materials and Fluke Networks quality
for separating, stripping and cutting
wire. Perfect tools for your every job. Modular Crimper Need-L-Lock™ D-Snips™ Cable Strippers Probe Pic Can Wrenches 4 and 8 position
Crimping Pliers Modular Adapters
Impact Tools
D914™ Series Impact Tools JackRapid™ Punchdown Tool Pro-Tool™ Kits
• Hook, spudger and blade • Terminate jacks eight • Ergonomically designed
storage tools are built into times faster than Dur-a-Grip™ pouch for con-
the handle traditional impact venient tool storage on belt
• Select low impact for tools. The patented design • D914™ and D814™ industry
24/26 gauge wire or high seats and terminates all standard punchdown tools
impact for 22-gauge wire wires simultaneously. Built- make for solid terminations
in blade cuts off the excess wire eliminat-
• Optional Phillips-head or flat • Easy to use cable stripper quickly
ing the need for a secondary trim step
screwdriver blade rings and slits many types of cable
• High-quality, consistent terminations
• Supports a variety of torque tool bits • Probe Pic checks for loose or damaged
and sockets • Ergonomic design reduces hand fatigue connections
• Easy blade insertion, locks in place • Convenient, built-in stripper • Cut and strip wire with Electricians’
• D914S features soft touch rubber handle • Multiple versions support several jack D-Snips™
and ergonomic design manufacturers • Three kit combinations available
Telephone Butt-In Test Sets
www.flukenetworks.com/ButtInTestSets
Comparison Chart
TS®54 TDR TS®52 TS®22A TS®22 TS®25D TS®30 / TS®19
PRO TS®120*
TDR for distance to Open, Shorts 3
Built-in toner 3
Display—backlit LCD and glow-in-the-the dark keypad 3 3 LCD only
Extended range high-impedance DataSafe™ operation in monitor mode 3 3 3
High-impedance DataSafe operation in monitor mode 3 3 3 3 3 3
Data lockout protection 3 3 3
DSL/POTS filtering technology 3 3 3
Low/high voltage indication 3 3 3
Low current (mA) indication 3 3 3
Over voltage and current protection 3 3 3 3 3 3
Waterproof—exceeds American Military Spec. MIL-STD-810E 3 3
RainSafe™—safe in severe weather conditions 3 3 3 3 3
DropSafe™—passes 20 foot (6 meter) drop test onto concrete 3 3 3 3 3
Stores nine 18-digit numbers in repertory dialer (speed dialing) 3 3 3 3 3
*TS120 for outside North America only. 67/33 break/make ratio.
The System for Certifying, Managing and
Reporting on your Cabling Installation Projects
www.flukenetworks.com/Versiv
Certify
DSX CableAnalyzer™ Series
Copper Certification
c CertiFiber ® Pro
Optical Loss Test Set
OptiFiber ® Pro
OTDR
FI-7000
FiberInspector™ Pro
• Unmatched speed for Cat 5-8 • Fastest time to certify—two • Industry’s shortest event and • Automated Pass/Fail
• Graphically displays the source fibers at two wavelengths attenuation dead zones certification of fiber optic
of failures including crosstalk, in six seconds • Simple set-up and fast trace connector end-faces
return loss and shield faults • Encircled Flux compliant times • Graphical indication of
• Meets TIA 2G and IEC Level V— • Single module performs both • EventMap™ view negates the problem areas
the most stringent accuracy SM and MM testing need for OTDR Trace Analysis • Compliant with IEC 61300-3-35
requirements • SM testing to 130 km • Bi-directional testing from • Fully documents results using
• Endorsed by cabling vendors • Built-in Visual Fault Locator one end with SmartLoop™ LinkWare™ PC or LinkWare™ Live
worldwide • SM testing to 130 km
r
• Built-in Visual Fault Locator
Manage Report
LinkWare™ Live LinkWare™ PC
Certification Management Cable Test Management
• Upload and consolidate test Software
results from remote sites • Electronically save, maintain
m
VERSIV
• Track project status from smart and archive test results
devices • Generate professional,
• Create and manage test setups customizable reports
and cable ID’s • Provides a statistical view of
• Track last location used and your entire cable plant’s
calibration status of your performance
entire fleet • Compliant with TIA 606-B
VERSIV makes you
MONEYevery time you use it
Versiv users report a 66% reduction in problems with
testing and a 10% increase in overall profitability.
Fluke Networks P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries worldwide. To find your local office contact details,
go to www.flukenetworks.com/contact or call: 1-800-283-5853
©2017 Fluke Corporation. Printed in U.S.A. 3/2017 7001151D
