Complete Packaging

and Irrigation
Solution

Euro Pac Series

Unique Advance Energy Efficient

www.hindsmachine.com
Machine Specifica on
MODEL Euro PAC 90 Euro PAC 130 Euro PAC 160 Euro PAC 200 Euro PAC 270 Euro PAC 350
INJECTION UNIT UNITS A B C A B C A B C A B C A B C A B C
Screw Diameter mm 25 30 35 30 35 40 40 45 50 45 50 55 50 55 65 60 65 70
Injection Capacity max. Cc 78 106 144 152 201 254 226 286 352 318 392 475 490 594 830 990 1161 1347
Actual Shot Weight-PS Gms 70 98 130 144 190 240 215 275 340 300 375 452 445 545 760 830 901 1057
Injection Pressure Max. Kg/cm2 2950 2064 1750 2850 2060 1585 2150 1700 1350 2028 1650 1360 2028 1650 1360 2482 1777 1335
Screw L/D Ratio 22 20 18 22 20 18 22 20 18 22 20 18 22 20 18 21.7 20 18.6
Screw Stroke mm 160 160 180 200 250 350
Screw speed/torque rpm/kgm 330/60 330/60 230/80 200/95 200/95 190
Nozzel Stroke mm 250 280 300 330 450 550
Nozzel Contact Force Ton 3.7 3.7 3.2 4.2 6.5 8
CLAMP UNIT
Clamping Force Ton 90 130 160 200 270 350
Clamp Stroke mm 350 390 450 480 550 660
Max.Daylight mm 730 840 950 1030 1150 1340
Mould.HT.Min/Max. mm 150/380 150/450 160/500 200/550 200/600 300/700
Platen Size mm 580x580 640x640 680x680 770xx770 850x850 970x970
Distance Between mm 370/370 430/430 470X470 520X520 580X580 680x680
Tie Rods (HXV)
Tie Rod Diameter mm 65 75 82 90 105 125
Ejector Stroke Max. mm 100 140 140 180 180 200
Ejector Force Ton 3.5 5 5 6 7.5 12
GENERAL DATA
Electric Motor KW(hp) 7.5(10) 11(15) 15(20) 18.5(25) 22(30) 30(40)
Total Load KW 12 17.5 22 26.5 30 42
Total Oil Capacity Ltrs 200 250 275 300 400 450
Machine Dimensions (LxWxH) Mtr. 3.5 x 1.2 x 1.8 4 x 1.25 x 1.2 5 x 1.35 x 1.9 5.8 x 1.5 x 2.1 6.5 x 1.7 x 2.2 6.9 x 1.7 x 2.2

Satandard Features
Clamping Controls
Ÿ Five point toggle. Ÿ B & R controller with 10” TFT display
Ÿ Wide platen area & Robust design with wide state on Ÿ Actual injec on speed & pressure with
moving platen graphical display
Ÿ Centralised lubrica on system with piston cylinder. Ÿ User friendly
Ÿ LPMT for posi on measuring for moving platen, screw Ÿ Ethernet connec on
travel & Ejec on. Ÿ Timer precision
Ÿ Air ejec on system for fixed platen & moving platen side. Ÿ Mould data storage
Injec on
Ÿ High speed hydraulic motor on screw drive for high
plas cizing rate. Op onal Feature
Ÿ High response logic cartridges used in injec on manifold Ÿ Accumulator for very high injec on speed.
to ensure high speed injec on with low noise. Ÿ Parallel refilling with electric screw drive
Ÿ Nitride screw with large L/D ra o for high output with Ÿ On line conveyor for ease of produc on.
homogeneous mixture. Ÿ Energy meter for analysis power
Ÿ Energy efficient DFE series electronic variable pump for consump on.
high output with low power consump on. Ÿ Feed temp controller.

Plot No. 139, Sector-8, IMT Manesar Ph : 0124-4368305, +91 9312657397