KR356H DVB-S2 HD IRD User Manual

This device is manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
 About This Manual
Intended Audience
This user manual has been written to help people who have to use, to integrate and to install
the product. Some chapters require some prerequisite knowledge in electronics and
especially in broadcast technologies and standards.

Disclaimer
No part of this document may be reproduced in any form without the written permission of
the copyright owner.
The contents of this document are subject to revision without notice due to continued
progress in methodology, design and manufacturing. DEXIN shall have no liability for any
error or damage of any kind resulting from the use of this document.

Copy Warning
This document includes some confidential information. Its usage is limited to the owners
of the product that it is relevant to. It cannot be copied, modified, or translated in another
language without prior written authorization from DEXIN.
 DIRECTORY
Chapter 1 Product Outline ................................................................................ 4
1.1 Outline...................................................................................................................... 4

1.2 Features .................................................................................................................... 4

1.3 Specifications ............................................................................................................ 5

1.4 Principle Chart .......................................................................................................... 6

1.5 Appearance and Description ....................................................................................... 6

1.6 System Connection Sample ........................................................................................ 7

Chapter 2 Installation Guide ............................................................................. 8

2.1 Acquisition Check ..................................................................................................... 8

2.2 Installation Preparation .............................................................................................. 8

2.3 Wire’s Connection ................................................................................................... 10

2.4 Signal Cable Connection .......................................................................................... 10

Chapter 3 Operation ....................................................................................... 13

3.1 LCD Menu Class Tree ............................................................................................. 13

3.2 General Setting ........................................................................................................ 16

Chapter 4 Web-based NMS Management ........................................................ 28

4.1 login ....................................................................................................................... 28

4.2 Operation ................................................................................................................ 28

Chapter 5 Troubleshooting ............................................................................. 43

 KR356H DVB-S2 HD IRD User Manual

Chapter 1 Product Outline

1.1 Outline

KR356H DVB-S2 HD IRD is DEXIN’s all-in-one device which integrates demodulation,

de-scrambler, re-mux and decoding in one case to convert RF signals into audio/video
(CVBS/YPbPr/HDMI/SDI) output.
It is a 1-U case which supports 2 tuner inputs to receive signal from satellite. The two CAMs/CIs
accompanied can descramble the programs input from encrypted RF, ASI and IP. The CAM
requires NO unsightly external power cords, cables, or additional remote control device.
Its pluggable structure design greatly facilitates the change of modules (demodulator or decoder) as
needed.
To meet customers’ various requirements, KR356H is also equipped with ASI and IP input for
re-mux, and output with 2 ASI ports and IP port.

1.2 Features

⚫ Demodulation + descrambler +re-mux+decoder modules in one box

⚫ 2 DVB- S/S2Tuner inputs
⚫ 1 ASI & 1 IP (UDP) input for re-mux
⚫ One CAM can decrypt multiple programs from Tuners/ASI/IP
⚫ One channel video output with various interface option (MPEG2/H.264)
⚫ Dual stereo audio output, or one Dolby Digital/Dolby Digital Plus (5.1) channel output
⚫ Support Dolby Digital/Dolby Digital Plus Decoding and passthrough
⚫ IP (1 MPTS & 8 SPTS) over UDP and RTP/RTSP output; ASI out
⚫ Support CC and Subtitle
⚫ Support maximum 128 PID mapping per input
⚫ Pluggable and changeable demodulator and decoder modules
⚫ LCD display, Remote control and Firmware, web NMS management
⚫ Updates via web

4 / 43
 KR356H DVB-S2 HD IRD User Manual

1.3 Specifications

Input
2 x DVB-S/S2RF, F type
1×ASI input for re-mux, BNC interface
1xIP input for re-mux (UDP)

Demodulating Section
DVB-S
Input Frequency 950-2150MHz
Symbol rate 2-45Msps
Signal Strength - 65- -25dBm
Constellation 1/2, 2/3, 3/4, 5/6, 7/8 QPSK
DVB-S2 (Version 1)
Input Frequency 950-2150MHz
Symbol rate QPSK 1~45Mbauds;
8PSK 2~30Mbauds
Code rate 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Constellation QPSK, 8PSK
DVB-S2 (Version 2)
Input Frequency 950-2150MHz
Code rate 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Constellation QPSK, 8PSK, 16APSK, 32APSK
Symbol rate QPSK 1~45 Msps; 8PSK1~45 Msps; 16APSK 1~45 Msps; 32APSK 1-32 Msps

Descrambling
CAM/CI Quantity 2
BISS Mode Mode 1, Mode E (up to 120Mbps)
Output
1*MPTS & 8*SPTS over UDP, RTP/RTSP.
IP Output
100 Base-T Ethernet interface (unicast / multicast)
2×ASI BNC interface, mirrored out
Video Interface: 1xCVBS/YPbPr/HDMI/SDI
Video Decode: MPEG-2; MPEG4 AVC/H.264
Resolution: 480i, 480p, 576i, 576p, 720p@50/59.94/60, 1080i@50/59.94/60
Decode Output Chroma: 4:2:0
Audio Interface: 2 x Stereo/4xmono, HDMI, SDI
Audio Decode: MPEG 1 Layer II, LC-AAC, HE-AAC, Dolby Digital/ Dolby Digital Plus
Audio Output Mode: Left, Right, Stereo, 5.1 CH (for HDMI/SDI out only)

System
Local interface LCD + control buttons
Remote management Web-server Management
Language English
Upgrade USB, web management

5 / 43
 KR356H DVB-S2 HD IRD User Manual

General
Power supply AC 100V~240V
Dimensions 482*300*44.5mm
Weight 3 kgs
Operation temperature 0~45℃

1.4 Principle Chart

Mux IP Output
Tuner 1 & ASI Output 1,2
Tuner 2 BISS Video
(CVBS/YPbPr/HDMI/SDI)
ASI
Audio 1: analog stereo or Dolby
Decoder
IP Digital/Dolby Digital Plus 5.1 CH
Module
CAM/CI Audio 2: analog stereo
CAM/CI 2 1

1.5 Appearance and Description

Front Panel Illustration:

1 Mini LCD TV for decoding

2 monitor LCD display for device control and configuration
3 Mini LCD TV power switch
4 NMS Port (for PC connection)
5 DATA Port (for IP stream input & output)
6 Indicators Area (Lock 1&2: to indicate RF input signal lock
status; Lock 3:to indicate the IP or ASI signal Lock status;
Decoder: to indicate the decoding status)
Up/Down/Left/Right Buttons
Enter Key
7
Menu Key
Lock Key

6 / 43
 KR356H DVB-S2 HD IRD User Manual

Rear Panel Illustration

6 7

1 2 3 4 5 8 9 10 11 12 13

1 USB upgrade port

2 HDMI video/audio output
3 Component video output (YPbPr)
Decoder Board 4 Composite video output (CVBS)
5 SDI video/audio output
6 Analog stereo audio out 1 (R/L)
7 Analog stereo audio out 2 (R/L)
Tuner Receiving 8 CAMs /Smart card slots A & B
Board 9 RF signal input and loop-through 1 & 2
10 ASI input Port for re-mux
11 ASI mirrored output ports
12 Power switch/Fuse/Socket
13 Grounding Wire

1.6 System Connection Sample

2 Tuner
1 ASI
1 IP RF Coaxial
NDS3565H
A/V Cable
2 Tuner
Encoder/Modulator
1 ASI
1 IP NDS3565H

7 / 43
 KR356H DVB-S2 HD IRD User Manual

Chapter 2 Installation Guide

2.1 Acquisition Check

When user opens the package of the device, it is necessary to check items according to
packing list. Normally it should include the following items:
⚫ KR356H DVB-S2 HD IRD
⚫ User’s Manual
⚫ HDMI Cable
⚫ YPbPr Cable
⚫ CVBS Cable
⚫ SDI Cable
⚫ Audio adapt cables
⚫ Power Cord
If any item is missing or mismatching with the list above, please contact our company.

2.2 Installation Preparation

When users install device, please follow the below steps. The details of installation will be
described at the rest part of this chapter. Users can also refer rear panel chart during the
installation.
The main content of this chapter including:
⚫ Checking the possible device missing or damage during the transportation
⚫ Preparing relevant environment for installation
⚫ Connecting signal cables
⚫ Connecting communication port with PC

2.2.1 Device's Installation Flow Chart Illustrated as following：

Connecting
Grouding
Acquisition Fixing Connecting Setting Running
Wire and
Check Device Signal Wire Parameter Device
Power
Cord

8 / 43
 KR356H DVB-S2 HD IRD User Manual

2.2.2 Environment Requirement

Item Requirement

When user installs machine frame array in one machine hall,

the distance between 2 rows of machine frames should be
Machine Hall Space
1.2~1.5m and the distance against wall should be no less
than 0.8m.

Electric Isolation, Dust Free

Volume resistivity of ground anti-static material:
Machine Hall Floor
1X107~1X1010, Grounding current limiting resistance: 1M
(Floor bearing should be greater than 450Kg/㎡)

Environment 5~40℃(sustainable ), 0~45℃(short time)，

Temperature installing air-conditioning is recommended

Relative Humidity 20%~80% sustainable 10%~90% short time

Pressure 86~105KPa

Installing rubber strip for sealing door-gaps and dual level

Door & Window
glasses for window

Wall It can be covered with wallpaper, or brightness less paint.

Fire Protection Fire alarm system and extinguisher

Requiring device power, air-conditioning power and lighting

power are independent to each other. Device power requires
Power
AC power 100-240V 50-60Hz. Please carefully check before
running.

2.2.3 Grounding Requirement

⚫ All function modules’ good grounding is the basis of reliability and stability of devices.
Also, they are the most important guarantee of lightning arresting and interference
rejection. Therefore, the system must follow this rule.
⚫ Coaxial cables outer conductor and isolation layer should keep proper electric
conducting with the metal housing of device.
⚫ Grounding conductor must adopt copper conductor in order to reduce high frequency
impedance, and the grounding wire must be as thick and short as possible.
9 / 43
 KR356H DVB-S2 HD IRD User Manual

⚫ Users should make sure the 2 ends of grounding wire well electric conducted and be
antirust.
⚫ It is prohibited to use any other device as part of grounding electric circuit
⚫ The area of the conduction between grounding wire and device’s frame should be no
less than 25mm2.

2.2.4 Frame Grounding

All the machine frames should be connected with protective copper strip. The grounding
wire should be as short as possible and avoid circling. The area of the conduction between
grounding wire and grounding strip should be no less than 25mm2.

2.2.5 Device Grounding

Connecting the device’s grounding rod to frame’s grounding pole with copper wire.

2.3 Wire’s Connection

⚫ Connecting Power Cord

User can insert one end into power supply socket, while insert the other end to AC
power.
⚫ Connecting Grounding Wire
When the device solely connects to protective ground, it should adopt independent way,
say, share the same ground with other devices. When the device adopts united way, the
grounding resistance should be smaller than 1Ω.

Caution:

Before connecting power cord to KR356H, user should set the power switch to “OFF”.

2.4 Signal Cable Connection

The signal connections include the connection of input signal cable and the connection of
output signal cable. The details are as follows:

2.4.1 KR356H DVB-S2 HD IRD Cables Illustration:

⚫ IP Input/output Cable Illustration:

10 / 43
 KR356H DVB-S2 HD IRD User Manual

⚫ Tuner Cable Illustration:

⚫ ASI Input/output Cable Illustration:

⚫ Video & Audio output Cable Illustration: (for connection between the

IRD and TV set or home theater)

CVBS Cable YPbPr Cable

11 / 43
 KR356H DVB-S2 HD IRD User Manual

HDMI Cable SDI Cable

⚫ Audio adapt cables Illustration: (for connection between the IRD and

TV set)

12 / 43
 KR356H DVB-S2 HD IRD User Manual

Chapter 3 Operation
The front panel of KR356H DVB-S2 HD IRD is the user-operating interface and the
equipment can be conveniently operated and managed according to the procedures displayed
on the LCD:

Keyboard Function Description:

MENU: Cancel current entered value, resume previous setting; Return to previous menu.
ENTER: Activate the parameters which need modifications, or confirm the change after
modification.
LEFT/RIGHT: Choose and set the parameters.
UP/DOWN: Modify activated parameter or paging up/down when parameter is inactivated.
LOCK: Lock the screen/cancel the lock state. After pressing the lock key, the LCD will
display the current configuring state.

3.1 LCD Menu Class Tree

(See next page :)

13 / 43
 KR356H DVB-S2 HD IRD User Manual

Initializing
Lock
HD IRD
Bitrate: 70.865Mbps Up Down Enter Menu

Main Menu: Status:

Status Alarm

Status:
Uptime

Main Menu: Input Sets 1: Tuner DVBS/S2 Tuner Parameters:

Input Sets 1: Tuner DVBS/S2 Tuner Parameters Satellite frequency
LNB frequency
Symbol rate
LNB voltage
22K
Signal Lock

1: Tuner DVBS/S2 Mux Program:

Mux Program TS Lock
Parse Program
Select Program
Input Sets
2: Tuner DVBS/S2 (Same content with ‘Tuner 1’above)

Input Sets 3 ASI:

3: ASI TS Lock
Parse Program
Select Program

Input Sets 4: IP IP Config:

4: IP IP Config Input IP
Input Port
Multicast
IGMP Snooping
Service IP

4: IP Mux Program:
Mux Program TS Lock
Parse Program
Select Program

Main Menu CI Card: Card A:

CI Card Card A Max Birate
Input TS Mode
Card Error Check
Parse Program
Descramble Program
Rom Version
Card Status
Descramble Error
CI Card:
(Same content with ‘Card A’above)
Card B

Main Menu： BISS Descrambling: BISS A :

BISS Descrambling BISS A Input TS Mode
Descrambler Key
SK
Word Mode
Burned Key
TS Lock
Parse Program
Descramble Program

BISS Descrambling: (Same content with ‘BISS A’above)

BISS B

Main Menu： TS Config: TS output mode:

TS Config TS output mode Mux
Tuner 1
Tuner 2
ASI
IP

TS Config:
TS output bitrate

TS Config: ASI output select:

ASI output select MPTS
SPTS 1

SPTS 8

TS Config:
TSID

TS Config:
ONID

14 / 43
 KR356H DVB-S2 HD IRD User Manual

Main Menu Decoder:

Decoder Video Format
Audio Mode
Audio Select
Volume
Search Program
Program Select
Rom Version
Decoder Status

Main Menu： IP Stream:

IP Stream Service IP

IP Stream:
Subnet Mask

IP Stream:
Gateway

IP Stream:
Output Protocol

IP Stream: MPTS 1:
MPTS 1 Data Enable
Null PKT Filter
Output IP
Output Port

IP Stream: SPTS 1:
SPTS 1 Data Enable
Null PKT Filter
Output IP
Output Port
Bitrate

IP Stream: (SPTS 2-8 have the same submenus

SPTS 8 with ‘SPTS 1’ above)

Main Menu： Network: NMS IP

Network NMS IP 192.168.0.136

Network: Subnet Mask

Subnet Mask 255.255.255.0

Network: Gateway
Gateway 192.468.0.1

Network: MAC Address

MAC Address 201212345678

Network: Web NMS Port

Web NMS Port 80

Network: Reset Password

Reset Password Yes ►No

Main Menu: System: Save Config?

System Save Config Yes ►No

System: Load Saved CFG?

Load Saved CFG Yes ►No

System: Reset all sets?

Factory Reset Yes ►No

System: LCD Time-out

LCD Time-out ►30 s

System: Set Password

Key Password 000000

System: Lock Keyboard

Lock Keyboard Yes ►No

System: xxxxxxxxxxxxxxxxx
Product ID xxxxxxxxx

System: Language
Language ►English 中文

System: HD IRD
Version SW x.xx HW x.xx

15 / 43
 KR356H DVB-S2 HD IRD User Manual

3.2 General Setting

Switch on the device and after a few seconds’ initialization, it presents start-up pictures as
below:

HD IRD
Start up… Start OK…
Bitrate: xx.xxx Mbps

⚫ HD IRD: Device’s name

⚫ Bitrate: xx.xxx MHz indicates the current effective bitrate multiplexed output.

Press LOCK key on the front panel to enter the main menu. The LCD will display the
following pages where user can configure the parameters for the device:

Main menu
1 Status
2 Input Sets
3 CI Card
4 BISS Descramble
5 TS Config
6 Decoder
7 IP Stream
8 Network
9 System

User could do all the settings according to the 8 directions displayed on the LCD. User can
press UP/DOWN buttons to specify menu item, and then press ENTER to enter the
submenus as below:

3.2.1 Status
Alarm: The alarm indicator will turn on if there is no A/V signals inputting or outputting bit
rate overflows. User then can enter this menu to check the error type. Otherwise it shows the
‘system is normal’.

Alarm
System is normal

Uptime: It displays the working time duration of the device. It times upon power on.
16 / 43
 KR356H DVB-S2 HD IRD User Manual

Uptime
1 Day(s) 03:30:02

3.2.2 Input Sets

KR356H supports 2 tuners input, 1 ASI input and 1 IP stream input. Users can enter ‘Input
Sets’ to configure the tuner/IP parameters to receive the transport streams and select
programs to mux out. It displays as below:

Input Sets
1 Tuner DVBS/S2
2 Tuner DVBS/S2
3 ASI
4 IP

➢ Tuner DVBS/S2:
Press ENTER key to enter ‘1 Tuner DVBS/S2’ (or ‘2 Tuner DVBS/S2’), it displays as
below:
1 Tuner DVBS/S2
Tuner Parameters
Mux Program

Tuner Parameters:
Users can enter this menu to configure the tuner parameters separately to receive the tuner
programs.

Tuner Parameters:
Satellite frequency
LNB frequency
Symbol rate
LNB Voltage
22K
Signal Lock For checking signal status and quality etc

Mux Program:
Users can parse the Tuner input program list and select program(s) to mux out in this menu.

17 / 43
 KR356H DVB-S2 HD IRD User Manual

NOTE: Multiplexing operation can only take effect on condition that the “TS output
mode” is set to “Mux” under ‘TS Config’. (i.e.: TS Config→TS output mode→Mux)

For reading the input

Mux Program TS Locked
bitrate
TS Lock Bitrate: 4.040 Mbps
Parse Program For reading the number
Searching Program
Select Program of programs from
Get 7 Programs
Tuner 1 (or 2)

Mux Program (0/7)

1: CCTV 1 X
Process of selecting programs to
Press ENTER key
output through front panel:
Mux Program (0/7)
[←]: to cancel program output;
1: CCTV 1 [←] Press RIGHT/LEFT
[→]: to output the program
key to shift arrow
“√”: a symbol indicating the
Mux Program (0/7)
corresponding program has been
1: CCTV 1 [→]
selected to output; Press ENTER key to
“X”: a symbol indicating the confirm
corresponding program has not
Mux Program (1/7)
been selected to output
1: CCTV 1 √

‘1/7’ represents there are all 7 programs in the list and 1 program has been selected to mux out through ASI.

➢ ASI:
Users can parse ASI input programs and select program(s) to mux out under this menu. The
operating method is same with what explained above.

3: ASI
TS Lock
Parse Program
Select Program

➢ IP:
Press ENTER key to enter ‘4 IP’, it displays as below:

4: IP
IP Config
Mux Program

18 / 43
 KR356H DVB-S2 HD IRD User Manual

IP Config:
Users can enter this menu to configure IP parameters according to the IP source to receive
the IP programs.

IP Config
Input IP
Input Port
Multicast
IGMP Snooping Off, V2 and V3 Optional
Service IP

Mux Program:
Users can parse the IP input program list and select programs to mux out in this menu. The
operating method is same with what explained above.

Mux Program
TS Lock
Parse Program
Select Program

3.2.3 CI Card
KR356H supports 2 CI cards (Card A & Card B) to descramble programs from either
encrypted RF, ASI or IP. Users can press ENTER key to enter ‘CI Card’ to configure the 2
cards respectively.

CI Card
Card A
Card B

Press ENTER key to enter Card A (or Card B):

Card A
Max Bitrate
Input TS Mode
Card Error Check
Parse Program
Descramble Program
Rom Version
Card Status
Descramble Error
19 / 43
 KR356H DVB-S2 HD IRD User Manual

➢ Max Bit rate

CI Max Bitrate options range from 48-108Mbps. Move the triangle to select a value as
principle: Actual Input Bitrate≤ Max Bitrate≤CI Max decrypting capacity

Max Bitrate
► 48 Mbps

➢ Input TS Mode
KR356H has 4 signal sources: Tuner 1, Tuner 2, ASI, and IP. One CI card can be applied to
descramble one channel input signal from the 4 signal sources. ‘Skip CI card’ means to skip
the card which is used for FTA stream.

Input TS Mode
► Skip CI Card
Tuner 1
Tuner 2
ASI
IP

➢ Card Error Check

Users can decide whether to enable or disable the card error check function in this menu.

Card Error Check

► Enable

➢ Parse Program
Users can read the quantity of programs parsed from the de-scrambled channel.

Searching Program
Get 8 Programs

➢ Descramble Program
Users can select program(s) from the searched out programs to descramble. The quantity to
be descrambled will depend on the CAM/CI performance you apply to.

►1 CETV 1 √
2 CCTV 4A X

20 / 43
 KR356H DVB-S2 HD IRD User Manual

➢ Rom Version/Card Status/Descramble Error

Users can read the other info about the CI card in the following menus.

Rom Version
X.X.X.X

Card Status
Normal

Descramble Error
Normal

3.2.4 BISS Descrambling

KR356H IRD also supports BISS to descramble encrypted programs from RF, ASI or IP.
Users can enter 2 BISS descrambling to configure the 2 BISS respectively.

CI Card
BISS A
BISS B

Press ENTER key to enter BISS A (or BISS B):

BISS A
Input TS Mode
Descrambler Key
SK
Word Mode
Burned Key
TS Lock
Parse Program
Descramble Program

➢ Input TS Mode
KR356H has 4 signal sources: Tuner 1-2, ASI, and IP. One BISS can be applied to
descramble one channel input signal from the 4 signal sources. ‘Skip BISS’ means to skip
the card which is used for FTA stream.

21 / 43
 KR356H DVB-S2 HD IRD User Manual

Input TS Mode
► Skip BISS
Tuner 1
Tuner 2
ASI
IP

➢ Descrambler Key/SK/Word Mode/Burned Key

Users need to input keys to descramble programs as per the BISS scrambling side which
usually is DVB-S/S2 modulator.
The descrambling principle is as following chart:

Modulating Side (BISS SCR) Receiving Side (BISS DESCR) Digit (0x----)

Mode 1+SW Data Mode 1+Descrambler Key 12

Mode E+ESW Data + Device Mode E + Descrambler Key + Burned Key 16

Mode E+ESW Data + Input ID Mode E + Descrambler Key + SK 14

➢ TS Lock
Users can read the real-time bitrate of the corresponding channel.

TS Locked
Bitrate: 34.662 Mbps

➢ Parse Program
Users can read the quantity of programs parsed from the de-scrambled channel.

Searching Program
Get 7 Programs

➢ Descramble Program
Users can select program(s) from the searched out programs to descramble.

►1 CETV 1 √
2 CCTV 4A X

22 / 43
 KR356H DVB-S2 HD IRD User Manual

3.2.5 TS Config
Users can press ENTER key to enter ‘TS Config’ to configure the parameters of TS output
through ASI.

TS Config
TS output mode
TS output bit rate
ASI output select
TSID
ONID

TS output mode: Enter this menu to select a TS output mode.

Under this mode, users can randomly select

TS output mode programs from any input channel to mux out.
Mux
Tuner 1 To passthrough programs from RF 1/2

Tuner 2
ASI To passthrough programs from ASI IN
IP
To passthrough programs from IP IN

TS Out Bit rate: Users can set TS output bit rate in this menu.

TS output bit rat

054 Mbps

ASI Output Select: The ASI output is copied from the one of the IP streams (MPTS and
SPTS 1-8).

ASI output Select

►MPTS

TS ID: Users can set TS ID in this menu.

TS ID
00001

23 / 43
 KR356H DVB-S2 HD IRD User Manual

ON ID: Users can set ON ID (original network ID) in this menu.

ON ID
00001

3.2.6 Decoder
Users can press ENTER key to enter ‘Decoder’ to set the video to be decoded. KR356H IRD
supports one channel program to output at various interfaces at the same time
(HDMI/SDI/CVBS/YPbPr).

Decoder
To set video/audio
►Video Format
parameters for the
Audio 1 Mode
output program
Audio 1 Select
Audio 2 Mode
Audio 2 Select
CC Enable
Subtitle
Tele text
AC3 pass
Volume
To search out the input program list and
Search Program
select one to decode and output.
Program Select
Rom Version
To read the rom version and
Decoder Status
decoding status

NOTE:
Audio 1: Primary Audio Chanel; Audio 2: Secondary Audio Channel
⚫ KR356H supports maximum 2 channels of analog stereo audios output
simultaneously.
⚫ When the program users choose to decode and output has only one audio channel,
users need to configure Primary Audio Chanel (‘Audio 1 Mode’ and ‘Audio 1
Select’) only.
⚫ 5.1 channel audio can only be resume via HDMI and SDI interfaces. When users
choose HDMI ro SDI as the output interface and output 5.1 channel audio, users
need to select ‘5.1 Channels’ under ‘Audio 1 Mode’ and set ‘Audio 2 Select’ off.

24 / 43
 KR356H DVB-S2 HD IRD User Manual

3.2.7 IP Stream
KR356H supports 1MPTS and 8 SPTS over IP (UDP, RTP/RTSP) output. Users can set the
IP out parameters in this menu.

IP Stream
Service IP To configure the general
Subnet Mask parameters for the IP out
Gateway
Output Protocol
MPTS 1
SPTS 1 Enter each sub-menu
to configure the
MPTS/SPTS output
SPTS 8 parameters.

3.2.8 Network
Users can set network parameters in this menu. Enter ‘Network’ submenus to separately set
corresponding parameters.

Network
NMS IP
Subnet Mask
Gateway
MAC Address
Web NMS Port
Reset Password

NMS IP
The IP address for connecting
192.168.000.136
the device to PC

Subnet Mask
255.255.255.000

Gateway
192.168.000.001

MAC Address
201012345678
25 / 43
 KR356H DVB-S2 HD IRD User Manual

Web NMS Port

00080

Reset Password?
Yes NO

3.2.9 System
Users can set the system parameters in this menu. Enter ‘System’ submenus to separately set
corresponding parameters.

System
Save Config
Load Saved CFG
Factory Reset
LCD Time-out
Key Password
Lock Keyboard
Product ID
Language
Version

Save Configuration? Choose yes to save settings.

Yes No and press ENTER to confirm

Choose yes to restore the Load Saved CFG?

device into the last saved Yes No
configuration.

Reset All Sets? Choose yes to restore the

Yes No device into factory’s default
configuration.
Press DOWN/UP key to select LCD Time-out
a time out for the LCD lighting 30 s
duration (5-120 seconds)

Set Password
To set a 6-digit password for
000000
unlocking the keyboard

26 / 43
 KR356H DVB-S2 HD IRD User Manual

Choose Yes to lock the

keyboard, then the keyboard
Lock Keyboard?
will be locked and cannot be
Yes No
applicable. It is required to User can view the serial number
input the password to unlock xxxxxxxxxxxxxxxxxxxx
of this device. It is read-only
the key board. This operation xxxxxxxxxxxxxxxxxxxxx
and unique
is one-off
Language
User can shift the system
English 中文
language here.
It displays the version
HD IRD
information of this device.
SW x.xx HW x.xx
Encoder Modulator: the name
of the device; SW: software
version number; HW:
hardware version number.

27 / 43
 KR356H DVB-S2 HD IRD User Manual

Chapter 4 Web-based NMS Management

User not only can use front buttons for setting configuration, but also can control and set the
configuration in computer by connecting the device to web NMS Port. User should ensure
that the computer’s IP address is different from this device IP address; otherwise, it would
cause IP conflict.

4.1 Login

The default IP address of this device is 192.168.0.136. (We can modify the IP through the
front panel.)
Connect the PC (Personal Computer) and the device with net cable, and use ping command
to confirm they are on the same network segment.
I.G. the PC IP address is 192.168.99.252, we then change the device IP to 192.168.99.xxx
(xxx can be 1 to 254 except 252 to avoid IP conflict).
Use web browser to connect the device with PC by inputting the device’s IP address in the
browser’s address bar and press Enter.
It will display the Login interface as Figure-1. Input the Username and Password (Both the
default Username and Password are “admin”.) and click “LOGIN” to start the device setting.

Figure-1

4.2 Operation
Summary:
When we confirm the login, it displays the WELCOME interface as Figure-2 where users
can have an overview of the device’s system information and working status.

28 / 43
 KR356H DVB-S2 HD IRD User Manual
Language
shift area

System
informatio
n

Input information
of the two satellite
signals, ASI and
IP stream.

Output information of the

TS and decoded program.

User can click any item here to enter

Figure-2
the corresponding interface to check
information or set the parameters.
Parameters → Input 1/2 (Tuner 1/Tuner 2 Input):
From the menu on left side of the webpage, clicking “Input 1” or “Input 2”, it displays the
interface where users can configure the 2 RF input parameters separately. (Figure-3)

Configure RF
RF input parameters in this
ASI input area according to
IP input
signal source to
receive programs.

Click “Apply” button to

apply the input data to
start receive signals.

Figure-3
Parameters → Input 3 (ASI Input):
“Input 3” refers to the ASI source which does not need to configure. Users can only read
the signal lock status and input bitrate. (Figure-4)

29 / 43
 KR356H DVB-S2 HD IRD User Manual

Figure-4
Parameters → Input 4 (IP Input):
From the menu on left side of the webpage, clicking “Input 4”, it displays the interface
where users can configure the IP input parameters. (Figure-5)

Configure IP parameters
in this area according to
IP source to receive
programs.

Click “Apply” button to

apply the input data to
start receive signals.

Figure-5
Parameters → CI Card:
KR356H supports 2 CI cards (Card A & Card B) to descramble programs from either
encrypted RF, ASI or IP. Users can click and enter ‘CI Card’ to configure the 2 cards
respectively. (Figure-6)

30 / 43
 KR356H DVB-S2 HD IRD User Manual

Card Selection Area

Program list from the channel

selected in ‘Input TS Mode’

Figure-6
➢ CI Max Bit rate
CI Max Bitrate options range from 48-108Mbps. Select a value in the pull-down list as
principle: Actual Input Bitrate≤ Max Bitrate≤CI Max decrypting capacity.
NOTE!

➢ Input TS Mode
KR356H has 4 signal sources: Tuner 1, Tuner 2, ASI, and IP. One CI card can be applied to
descramble one channel input signal from the 4 signal sources. ‘Skip CI card’ means to skip
the card which is used for FTA stream.

➢ Card Error Check

Users can decide whether to enable the card error check function by checking the box.

After configuring CI card parameters, click button to apply the input data and then
click button to parse programs from the channel selected in ‘Input TS Mode’.

Check the program(s) to be descrambled and click button to start

31 / 43
 KR356H DVB-S2 HD IRD User Manual

descrambling the checked program(s). The program quantity to be descrambled will depend
on the CAM/CI performance you apply to.
Number before slash indicates the programs which have been descrambled.
Number behind slash indicates the whole programs from the selected channel.

Users can also read the program information by clicking ‘+’ symbol.

Parameters → BISS:
From the menu on left side of the webpage, clicking “BISS”, it displays the interface where
users can configure 2 BISS and descramble the input channels. (Figure-8)

BISS Selection Area

Figure-8

Input TS Mode：

KR356H has 4 signal sources: Tuner 1-2, ASI, and IP. One BISS tag can be applied to

32 / 43
 KR356H DVB-S2 HD IRD User Manual

descramble one channel input signal from the 4 signal sources. ‘Skip BISS’ means not to
involve BISS function and it is used for FTA stream.

Items showing below are working as per the keys or codes set in the BISS scrambling side
(DVB-S/S2 modulators).

Input corresponding items and data to active the BISS descrambling as principles be
Modulating Side (BISS SCR) Receiving Side (BISS DESCR) Digit (0x----)

Mode 1+SW Data Mode 1+Descrambler Key 12

Mode E+ESW Data + Device Mode E + Descrambler Key + Burned Key 16

Mode E+ESW Data + Input ID Mode E + Descrambler Key + SK 14

After configuring the above BISS parameters, click button to apply the input data

and then click button to parse programs from the channel selected in ‘Input TS
Mode’.
The searched out programs will be listed in the ‘Descramble’ box below: (Figure 9)

Program list from the channel

selected in ‘Input TS Mode’

Figure-9

Check the program(s) to be descrambled with “√” and click button to start

descrambling the checked program(s). The program quantity to be descrambled will depend
on the CAM/CI performance you apply to.

33 / 43
 KR356H DVB-S2 HD IRD User Manual

Number before slash indicates the programs which have been descrambled.
Number behind slash indicates the whole programs from the selected channel.

Users can also read the program information by clicking ‘+’ symbol.

Parameters → TS Config:
From the menu on left side of the webpage, clicking “TS Config”, it displays the interface
where users can configure the ASI output parameters. (Figure-10)

Configure TS ID and ON ID here for the output stream.

Figure-10
Output TS Mode:
Under this mode, users can randomly select programs from any input channel to mux out.
To passthrough programs from Tuner 1/2

To passthrough programs from ASI

To passthrough programs from IP

ASI Output Select: The TS content output through ASI is copied from the one of the IP
streams (MPTS and SPTS 1-8). Users can select one stream from the pull-down list.

After finishing the configuration, click to confirm.

34 / 43
 KR356H DVB-S2 HD IRD User Manual

Parameters → Mux:
Click “Mux” and it displays the interface where users can multiplex programs and modify
program info. The selected programs will output in TS form through IP and ASI ports.
(Figure-11)

Input Area Output Area

Operation Area

Figure-11
Configure ‘Input Area’ and ‘Output Area’ with buttons in ‘Operation Area’. Instructions are
as below:

: To enable/disable the CA filter

: To enable/disable the PID remapping

To refresh the input program information
To refresh the output program information
Select one input program first and click this button to transfer the selected
program to the right box to output.
Similarly, user can cancel the multiplexed programs from the right box.
To select all the input programs
To select all the output programs

To parse programs time limitation of parsing input programs

◆ Program Modification:
The multiplexed program information can be modified by clicking the program in the

35 / 43
 KR356H DVB-S2 HD IRD User Manual

‘output’ area. For example, when clicking , it triggers a dialog box (Figure 12)
where users can input new information.

This device supports 8

SPTS IP out. Users can
enable the program
output via SPTS here.

NOTE!
Figure-12
Input new data and click ‘Save’ button at last to confirm the modification.

Parameters → PID Pass:

Click “PID Pass”, it displays the interface where to add the PIDs which need to pass through.
(Figure-13)
In some occasions, there are some PIDs which won’t belong to any program, such as EPG,
NIT tables and so on which user just wants to pass them through the multiplexing module
without changing anything. This is the main purpose of this function.

Click this button to

add new columns.

Operation Area

Figure-13
After finishing the configuration, click to confirm.

Parameters → Decoder:

36 / 43
 KR356H DVB-S2 HD IRD User Manual

KR356H supports decode program to output at HDMI/SDI/CVBS/YPbPr. Users can

configure the Video/Audio output parameters in this tag. (Figure-14)

To set the video and audio

Primary Audio
parameters for the
Secondary Audio program to be decoded

It displays all the input

programs. Select one
program here to
decode and output.

Figure-14

NOTE:
⚫ KR356H supports maximum 2 channels of analog stereo audios output
simultaneously.
⚫ When the program users choose to decode and output has only one audio channel,
users need to configure Primary Audio Chanel (‘Audio 1 Mode’ and ‘Audio 1
Select’) only.
⚫ 5.1 channel audio can only be resume via HDMI and SDI interfaces. When users
choose HDMI ro SDI as the output interface and output 5.1 channel audio, users
need to select ‘5.1 Channels’ under ‘Audio 1 Mode’ and set ‘Audio 2 Select’ off.

After finishing the configuration, click to confirm.

Parameters → IP Stream:
This unit supports TS output in IP (1 MPTS & 8 SPTS). Click “IP Stream” and it displays
the interface where users can configure the MPTS & SPTS out parameters. (Figure-15)

37 / 43
 KR356H DVB-S2 HD IRD User Manual

Figure-15

Parameters → Network:
From the menu on left side of the webpage, clicking “Network”, it will display the screen
as Figure-16 where to configure the network parameters for the device.

38 / 43
 KR356H DVB-S2 HD IRD User Manual

Use this IP to connect the

device to PC for management.

Figure-16
System → LCD/Keyboard:
From the menu on left side of the webpage, clicking “LCD/Keyboard”, it will display the
screen as Figure-17 where to control the device’s front panel.

Figure-17
System → Password:
From the menu on left side of the webpage, clicking “Password”, it will display the screen
as Figure-18 where to set the login account and password for the web NMS.

39 / 43
 KR356H DVB-S2 HD IRD User Manual

Figure-18

System → Save/Restore:
From the menu on left side of the webpage, clicking “Save/Restore”, it will display the
screen as Figure-19 where to save or restore your configurations.

Figure-19

System → Backup/Load:
From the menu on left side of the webpage, clicking “Backup/Load”, it will display the
screen as Figure-18 where to backup or load your configurations.
40 / 43
 KR356H DVB-S2 HD IRD User Manual

Figure-20

System → Firmware:
From the menu on left side of the webpage, clicking “Firmware”, it will display the screen
as Figure-19 where to update firmware for the device.

Figure-21
System → Reboot:
From the menu on left side of the webpage, clicking “Reboot”, it will display the screen as
Figure-22 where to restart the device manually.

41 / 43
 KR356H DVB-S2 HD IRD User Manual

Figure-22

42 / 43
 KR356H DVB-S2 HD IRD User Manual

Chapter 5 Troubleshooting
DEXIN’s ISO9001 quality assurance system has been approved by CQC organization. For guarantee the

products’ quality, reliability and stability. All DEXIN products have been passed the testing and

inspection before ship out factory. The testing and inspection scheme already covers all the Optical,

Electronic and Mechanical criteria which have been published by DEXIN. To prevent potential hazard,

please strictly follow the operation conditions.

Prevention Measure

⚫ Installing the device at the place in which environment temperature between 0 to 45 °C

⚫ Making sure good ventilation for the heat-sink on the rear panel and other heat-sink bores if

necessary

⚫ Checking the input AC voltage within the power supply working range and the connection is correct

before switching on device

⚫ Checking the RF output level varies within tolerant range if it is necessary

⚫ Checking all signal cables have been properly connected

⚫ Frequently switching on/off device is prohibited; the interval between every switching on/off must

greater than 10 seconds.

Conditions need to unplug power cord
⚫ Power cord or socket damaged.

⚫ Any liquid flowed into device.

⚫ Any stuff causes circuit short

⚫ Device in damp environment

⚫ Device was suffered from physical damage

⚫ Longtime idle.

⚫ After switching on and restoring to factory setting, device still cannot work properly.

⚫ Maintenance needed

43 / 43