Page 1 of 7
Printing date 17.Aug. 2021 reviewed on 17.Aug. 2021
Material Safety Data Sheet
1 Identification of the substance/preparation and of the company/undertaking
.Product details
.Trade name: Water Dispenser
.Type No.:
.End Use: Convenient drinking water
.Manufacturer/Supplier: Ningbo Aofukang Intelligent Technology Co.,Ltd
Industrial park,Fuhai town,Cixi city,Zhejiang province ,China
Tel: +86- 0574-63689181
.Further information obtainable from: Ningbo Aofukang Intelligent Technology Co.,Ltd
.Information in case of emergency: Ningbo Aofukang Intelligent Technology Co.,Ltd
Industrial park,Fuhai town,Cixi city,Zhejiang province ,China
Tel: +86-013094838868
E-mail: litanjun8868@163.com
2 Hazards identification
Potential Health Effects:
NFPA
.Emergency Overview: Irritating vapors to respiratory system and eyes may form when polymer
is processed date high temperatures.
.Routes of Entry: For hot material; Skin contact. Eye contact. Inhalation.
.Potential Acute Health Effects:
.Eyes: This product is not known to cause eye irritation. However, as with any chemical, some sensititive
individuals may experience eye irritation upon contact.
.Skin: No Known acute effects of this product resulting from skin contact at room temperature.
.Inhalation: Negligible hazard at room temperature.
.Ingestion: Harmful if swallowed. May cause irritation of the digestive tract
.Potential Chronic Health Effects:
.Carcinogenic Effects: Classified none by NTP, None by OSHA. 3(not classifiable for human) by IARC.
.Medical Conditions Aggravated by Overexposure：There is no known effect from chronic exposure to this
product. Repeated
or prolonged exposure is not known to aggravate medical condition.
Page 2 of 7
Printing date 17.Aug. 2021 reviewed on 17.Aug. 2021
3 Composition/information on ingredients
.Dangerous Components: Chemical characterization: Under normal conditions of use and handling, this
product is not expected to create any health or safety hazards.
.Description: Mixture of substances listed below with additions
.Product Name: CAS Number Weight Percent (%)
Compressor (Refrigerant) 811-97-2 0.15%
PP 9003-07-0 25%
ABS 9003-56-9 37%
Stainless steel 12597-68-1 0.2%
Toughened glass 65997-17-3 23%
mental side plate 840523-88-8 14.65%
4 First aid measures
.Persons using these products should consult a physician or other medical professional if an accident
involving these products in injury. Specific first-aid measures are as follows:
.Eye Contact: alcohol may cause irritation or a temporary burning sensation. The dust may be irritation to the
eyes causing discomfort and redness.
.Skin Contact: No Known acute effects of this product resulting from skin contact at room temperature
.Ingestion:Unlikely to occur, but swallowing the wood dust may result in abdominal discomfort.
.Inhalation: alcohol may cause irritation to the nose and throat. The dust may irritate the throat and lungs
especially in people with upper respiratory tract or chest complaints. Asthma may occur.
.Medical conditions aggravated by exposure: No medical conditions are known to be aggravated by these
products.
.Recommendations to physicians: Effects may be delayed. Treat symptomatically and supportively. Urine acetone
test may be helpful in diagnosis..
5 Fire-fighting measures
..Extinguishing Media: Foam, CO2, Dry Chemical or Water Fog.
Use the above or any Class B extinguishing agent. Water may be unsuitable as an extinguishing medium, but
helpful in keeping adjacent containers cool.
.Special Firefighting Procedures: Firefighters and others exposed to vapors or products of combustion should
wear self-contained breathing apparatus. Evacuate area of unprotected personnel. Wear protective clothing.
.Unusual Fire and Explosion Hazards: Vapors may form an explosive mixture in air and may be ignited by
sparks, pilot lights, etc. Closed containers may rupture when exposed to extreme heat
Page 3 of 7
Printing date 17.Aug. 2021 reviewed on 17.Aug. 2021
6 Accidental release measures
. Person-related safety precautions: General Information: Use proper personal protective equipment as
indicated in Section 8. Keep unprotected persons away.
.Measures for environmental protection:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or
sewage system. Do not allow to enter sewers/surface or ground water.
.Measures for cleaning/collection:
Absorb with liquid-binding material (sand, diatomite, acid binders,
universal binders, sawdust). Dispose contaminated material as waste
according to item 13.
Ensure adequate ventilation.
.Spill Management: Place in container for proper disposal. Stop the source of the release if you can do it without
risk. Contain release to prevent further contamination of soil, surface water or groundwater. Clean up spill as
soon as possible, observing precautions in Exposure Controls/Personal Protection. Use appropriate techniques
such as applying non-combustible sorbent materials or pumping. Where feasible and appropriate, remove
contaminated soil. Place contaminated materials in disposable containers and dispose of in a manner consistent
with applicable regulations. If heated material is spilled, allow it to cool before proceeding with disposal
methods.
7 Handling and storage
Handling:
.Information for safe handling:
Ensure good ventilation/exhaustion at the workplace.
Use only in a well ventilated area. Use spark-proof tools and explosion proof equipment. Avoid contact with skin
and eyes. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous.
.Information about fire- and explosion protection:
Keep ignition sources away-Do not smoke. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Protect against electrostatic charges.
.Storage:
.Requirements to be met by storerooms and receptacles: If during the use of these products, avoid breathing, or
skin or eye contact; Store these products in a cool, dry location, away from sources of intense heat. Store away
from incompatible materials, water, heart and flame
Page 4 of 7
Printing date 17.Aug. 2021 reviewed on 17.Aug. 2021
Information about storage in one common storage facility: Not required.
.Further information about storage condition: Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container.
8 Exposure controls/personal protection
.Additional information about design of technical facilities: No further date; see item 7.
.Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use
adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure
limits.
.Additional information: The lists valid during the making were used as basis.
.Personal protective equipment:
.Protective Gloves:
Protective Gloves
Rubber or plastic acid-resistant gloves with elbow-length gauntlet.
.Eye Protection:
Tightly sealed goggles
.General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated
clothing. Wash hands before breaks and ate the
end of work.
Avoid contact with the skin.
Avoid contact with the eyes and skin.
.Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer, As the product is a preparation of several substances, the resistance of
Page 5 of 7
Printing date 17.Aug. 2021 reviewed on 17.Aug. 2021
the glove material can not be calculated in advance and has therefore to be checked prior to the application.
.Penetration time of glove material
The exact break trough time has to be found out by manufacturer of the protective of gloves and has to be
observed.
.Eye protection: Goggles recommended during refilling.
9 Physical and chemical properties
.General Information
Form: solid
Color:
Odor:
.Change in condition Not applicable
Melting point/Melting range: Not applicable
Boiling point/Boiling range: Not applicable
.Flash point: Not applicable
.Self-igniting: Not applicable
.Danger of explosion: Not applicable
.Density: Not determined
.Relative density: Not available
.Vapor density: Not Applicable
.Evaporation rate Not Applicable
.Solubility in/Miscibility with
Water: Not Applicable
.Viscosity:
Dynamic: Not available
10 Stability and reactivity
.Condition to Avoid: Avoid excessive heat or sources of ignition.
.Incompatible Materials: This product reacts with strong acid, strong bases, and oxidizing agents.
.Hazardous Decomposition: upon decomposition, this product evolves carbon monoxide, carbon
dioxide, and/or low weight hydrocarbons.
.Hazardous Reactions: Hazardous polymerization will not occur.
Page 6 of 7
Printing date 17.Aug. 2021 reviewed on 17.Aug. 2021
11 Toxicological information
Pleas refers to section 3 for hazards identification.
.Acute Toxicity Data: The following results are for a similar product.
.Primary irritant effect: mild
.on the skin:Not available
.on the eye: Not available
.Sensitization: Not available
.Neurotoxicity: No data available.
.Mutagenicity: No data available.
.Other Studies: No data available.
12 Ecological information
.Ecotoxical effects: None Established
.General notes:
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
.Ecotoxicity: Not available.
.BOD5 and COD: Not available.
.Biodegradable/OECD: Not available.
.Mobility: Not available.
13 Disposal considerations
Dispose of in accordance with all applicable regulation.
.Waste Disposal Methods: When no longer needed, these articles may be disposed of as permitted by local
waster handling authority.
.U.S. EPA waste number: Not applicable.
14 Transport information
DOT Classification for Bulk Shipments (non bulk shipments may differ): Not a DOT controlled material (United
States).
.Packing Group: Not applicable
.U.S. DOT: consignment is fully described by proper shipping name and packed, marked and in propercondition
for carriage by air.consignment is not classified as dangerous under thecurrent edition of the IAtA 62h. ,
.North American Emergency response guidebook number.2000: Not applicable
.Marine Pollutant: No component of these products is designated as a Marine Pollutant,
.Transport Canada transportation of dangerous goods regulations: These products are not considered as
dangerous goods,
Page 7 of 7
Printing date 17.Aug. 2021 reviewed on 17.Aug. 2021
15 Regulatory information
.Sara reporting requirements: Not applicable as an article. The components of these products do not have
requirements as pure compounds; if dusts from the product are produced, SARA requirements may be
applicable.
.Sara threshold planning quantity: There are no specific threshold planning quantities for the
components of these products. None of the ingredients is listed.
.TSCA (Toxic substances Control ACT): There are articles and are not subject to the requirements of TSCA.
.California Safe drinking water and toxic enforcement act (Proposition 65): No component of these products is
on the
proposition 65 list
16 Other information
The contents and format of this MSDS/SDS are in accordance with REGULATION (EC) No 1907/2006, EU
Commission Directive 1999/45/EC, 1967/548/EEC.
******************************************************************************************
DISCLAIMER OF LIABILITY
The information in this MSDS/SDS was obtained from sources which we believe are reliable. However, the
information is provided without any warranty, express or implied, regarding its correctness. The conditions or
methods of handing, storage, use or disposal of the product are beyond our control and may be beyond our
knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss,
damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the
product. This MSDS/SDS was prepared and is to be used only for this product. If the product is used as a
component in another product, this MSDS/SDS information may be applicable.
*****************************************************************************************
End of document
********************************The End*******************************
