CONTENTS

STEEL BUSHINGS, Hardened & Ground - Bucket Bushes

TERMS AND CONDITIONS OF SUPPLY............... Page 2
DRAWINGS & KEY TO PART NUMBERS ....... Page 3 - 4 Bushes to suit 90mm Dia Pins ....................Page 24
Bushes to suit 0.75” to 2” Diameter Pins .................5 - 14 Bushes to suit 95mm to 110mm Dia Pins ......25 - 26
Bushes to suit 55mm to 70mm Diameter Pins .......15 - 19 Bushes to suit 4.25” to 200mm Dia Pins ........27 - 28
Bushes to suit 71mm to 3” Diameter Pins ..............20 - 21 Bronze Bearings ................................................... 28
Bushes to suit 80mm to 3.5” Diameter Pins ...........21 - 23 Seals - Pin Wipers - Shim Kits - Spacer Washers .29

Pin Steel - Super Pins - 4140 Precision Ground - Induction Hardened .30
Steel Round Bar, Induction Hardened - K1045 - Convenient lengths ............... 31
STEEL PINS, Induction Hardened - Bucket Pins
Schematic Drawings & Key to KSet Part Numbers ........................................................................................32 - 33
3/4” Diameter to 2.25” Diameter - Hardened Pins - ..................................................................................................34 - 38
2.75” Diameter to 90 mm Diameter - Hardened Pins - ..............................................................................................39 - 41
95 mm Diameter to 115 mm Diameter - Hardened Pins - ........................................................................................42 - 43
120mm, 125 mm, 5”, 130 mm, 140 mm to 160 mm Diameter - Hardened Pins - .............................................................44
Weld-on End Plates for Excavator Bucket Pins .....................................................................................45 - 48
Aftermarket Pins and Bushings - To Suit:
Case Part Numbers Referenced to KSet Part Numbers ...................................................................................................49
Case 580SK Back Hoe Loaders - Case SLE Back Hoe Loaders ...............................................................................50 - 51
Caterpillar Wheel Loaders 966, 980 - Cat Compact Loader CL110 - LHD CL110 Pins...................................................... 52
Caterpillar D11 Ripper Frame ...........................................................................................................................................53
Caterpillar Bearings - Referenced to KSet Location Guide ..............................................................................................54
Eimco 130 LHD - Eimco ED7 LHD - Eimco ED10 LHD - Eimco 912 LHD - Eimco 913 LHD ....................................55 - 56
John Deere Backhoe Pins and Bushings - John Deere Scraper Wear Rails - John Deere Grader Parts ........................57
Kato, Kubota, IHI Bucket ends, Kobelco SK045, Yanmar VIO 50 ............................................................................58 - 59
Kobelco Excavators SK060 SK250 SK260 SK330 ...................................................................................60
Komatsu Mini Excavators PC45 PC60 PC75UU .............................................................................................61
Komatsu Excavators PC120 PC150 PC128US ..............................................................................................62
Komatsu PC200 Bucket Pins Bushings - PC228U - Komatsu PC220 Bucket Pins Bushings - PC250 ................................................63
Komatsu PC300 Pins Bushings - PC350 - Komatsu PC400 Pins Bushings - PC450 ....................................................................64
Komatsu PC600 Bucket Pins Bushings - Komatsu PC800 Bucket Pins Bushings - Komatsu PC1250 Bucket Pins Bushings - ....................65
Komatsu WA320 Pins Bushings - WA350 - WA380 - WA420 - WA450 - Komatsu WA470 Pins Bushings - ..................................66
Komatsu WA480 Pins & Bushings - Komatsu WA500 Pins & Bushings - Komatsu WA600 Pins & Bushings - ........................................67

Alpha High Speed Drills & Taps .........................................................................................................................68

SANDVIK Coromant - Ceramic Inserts - Whisker Reinforced - Hard Part Turning Tips - .................................................69
Sterling - Tools & Measuring - Sterling - Knives & Cutters .................................................................70 - 71

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320

Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 1 November 2013
Located in the Newcastle - Sydney Region - Australia
 KSet Engineering Pty Ltd. For “Catalogue Sales,”
Phone 02 4932 0601 (Minimum Product Order $150 plus GST)
THE LARGEST RANGE OF HARDENED & GROUND STEEL BUSHINGS IN THE COUNTRY - EX STOCK
INDUCTION-HARDENED PINS AND PIN STEEL
“PROMPT DISPATCH OF GOODS EX STOCK IN EXCHANGE FOR PROMPT PAYMENT”

TERMS AND CONDITIONS OF SALE:

NET PAYMENT WITH ORDER. GOODS WILL NOT BE DISPATCHED BEFORE PAYMENT IS RECEIVED

PAYMENTS: Cheques: To approved customers only. Cash: Correct amount only

MasterCard and Visa Cards accepted. No Transaction Fee is charged on sales under $1,000
Electronic Transfers to: KSet Engineering Pty Ltd BSB: 06 2813 Account No.: 1038 8155
TITLE does not pass to purchaser until Payment has been received in FULL

COUNTER SALES: By APPOINTMENT ONLY Between 8:30am-12:30 midday

KSet Engineering Pty Ltd is a Manufacturing Wholesaler, Not a Retail Shop
Minimum Counter Sale is $240 plus GST
RESTOCKING FEE: 16% or $50 Minimum No credit is given for goods returned after 14 days from invoice
or without KSet Management consent, nor for goods that have been fitted
If not in original wrapped condition, Re-Wrapping charges may apply
7 DAY ACCOUNTS May be extended to customers who have traded satisfactorily, with a Credit Limit at our discretion
Non-Supply is also at our discretion should trading exceed 21 days
DISTRIBUTOR ACCOUNTS: 30 DAYS
Trading must exceed $20,000 p.a. and a minimum of 2 invoices per month. Credit limit at our discretion
Trading automatically suspended if account is outstanding 32 days from end of month following invoice
FREIGHT All goods are carried by KSet Engineering preferred major freight companies at competitive prices
Freight, Plus Packing, Handling, Insurance are included on invoice as two separate items.

F Codes for Freight Plus P Codes for Packing, Handling, Insurance:

F3 3kg Airbag $16 PB1 Airbag $12

F5 5kg Airbag $26 PB2 2 Bags $17
FB Fastways Blue Label Newcastle $9 PC1 HD Carton $14
FL Lime label Sydney Region $13 PC2 2 HD Cartons $22
FNT Northern Territory / Remote Surcharge $20 PSK Small skid $21
FR Road Freight via Star Track POA PMS Medium skid $25
PPT Pallet $37
PFastC1 1 Carton Fastways Freight Forward $13
ONFORWARDING:
FM Manual Consignment Charge $15 Plus The same Packing, Handling item is applied
When goods are sent “freight on”, they are NOT INSURED, and purchaser assumes ALL RISK.

KSet Engineering Pty Ltd. For “Custom Products,”

Phone 02 4932 3427 (Minimum Custom Order $240 plus GST)

INDUCTION HARDENED PINS, From SAME DAY service where hardened bar stock is used
SPECIAL HARDENED BUSHINGS, From SAME DAY service where we are able to modify stock items
to around 10 working days for new items

TERMS AND CONDITIONS OF SALE - ALL CUSTOMERS

We submit a written quote in answer to your enquiry. We require 50% deposit received by bank
Written order before commencement, and 50% balance before dispatch
Orders under $1,800: Full payment with order

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320

Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 2 November 2013
Located in the Newcastle - Sydney Region - Australia
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 3 November 2013
Located in the Newcastle - Sydney Region - Australia
EXAMPLE
SEE PAGE 5
(TYPE U BUSH)*

EXAMPLE
SEE PAGE 11
(TYPE J BUSH)

EXAMPLE
SEE PAGE 16
(TYPE F BUSH)
B70F60-60

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320

Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 4 November 2013
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 0.75” DIAMETER SHAFT
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES DRILLS
Stocktake - TAPS - DIES
at 28-10-2013 - BURRS
JN30629, JN31028
EX GST Usage
See
Page 68
Cost $ 7,422
B26-19-20 $ 26 1.002” 0.755” 0.79” . 10 kg MCC MFG A 179 40 pa $6 McCulloch
B26-19-24 $ 24 1.002” 0.755” 0.94” . 10 kg TESK D 119 0 pa $6
B25-19G29 $ 18 0.995” 0.754” 1.13” JOHN DEERE = T42803 Z 76 0 pa JD410 INT fg 5W GRV
B26-19-32 $ 26 1.002” 0.755” 1.25” . 06 kg TESK 2013 C 27 0 pa
B25-19G38 $ 22 0.995” 0.754” 1.50” JOHN DEERE = T42806 C 55 22 pa $4 JD410
B26-19-48 $ 28 1.001” 0.754” 1.88” .08 kg WAS: B25-19-48 U12271 B 80 52 pa $8 ORIG = 1.000”

B28-19-76 $ 21 1.118” 0.762” 3.00” 5 ONLY TO CLEAR Z 5 0 pa

B29-19-51 $ 32 1.126” 0.756” 2.00” TESK C 41 22 pa $12
B32-19-32 $ 22 1.252” 0.758” 1.25” TESK C 13 6 pa $4
B29-20-78 $ 34 28.85mm 20.20mm 78.0mm 20mm Bolt JOHN DEERE = N134562 D 9 0 pa Great SthBrgs Before HT: 29.10 x 20.25 x 78.0
B30-20-36 $ 34 30.06mm 20.02mm 36.0mm TESK 2013 D 12 0 pa NS Eng
B30F20-36 $ 34 30.03mm 20.02mm 36.0mm TESK 2013 D 12 0 pa NS Eng

TO SUIT 0.875” & 24mm DIA SHAFT

B29-22-20 $ 25 1.127” 0.880” 0.79” .04 kg MCC MFG C 191 8 pa $4 50 McCullochs Dec09
B29-22-24 $ 23 1.127” 0.880” 0.94” TESK D 47 0 pa Sold 108 in Jly/Aug 2009
B32-22-26 $ 27 1.253” 0.877” 25.4mm .09 kg 10 ONLY D 10 0 pa New in catalogue 2012
B33-23-25 $ 27 1.269” 0.879” 25.1mm .09 kg CASE 580K STG C 15 14 pa $4 D127507
B34-24-25 $ 24 34.10mm 24.10mm 25.0mm .09 kg 16 ONLY D 16 0 pa Launchbury’s Inv 19619

TO SUIT 25mm DIAMETER SHAFT

B33-25G30 $ 29 33.08mm 25.10mm 30.0mm .08 kg 68721-66630 B 52 68 pa $4
B33-25G35 $ 30 33.08mm 25.10mm 35.0mm .08 kg Suit YANMAR C 74 10 pa $8 1 Tonne Yanmar
B35-25-22 $ 23 35.02mm 25.11mm 21.8mm TESK 2008 C 26 18 pa $5
B35-25-27 $ 28 35.0 mm 25.19mm 27.0mm 404 324 502 B 4+60 21 pa $6
B35-25-30 $ 27 35.03mm 25.12mm 30.0mm TESK D 98 0 pa 25.09-25.13
B35-25X30 $ 29 35.12mm 25.14mm 29.8mm .08 kg 00024-00024 C 46 4 pa $8 OPEN/BLIND FIG.8
B35G25G31 $ 27 35.08mm 25.15mm 31.0mm .09 kg JOHN DEERE = R81854 C 54 6 pa $5 310 C
B35-25-33 $ 23 35.0 mm 25.19mm 33.0mm 404 324 501 D 75 0 pa Made 101 in Nov 2005
B35-25G34 $ 23 35.10mm 25.15mm 33.8mm 00021-00026 D 42 0 pa $5
B35-25X35 $ 30 35.09mm 25.14mm 34.8mm 00024-00064 D 44 0 pa OPEN/BLIND FIG.8
B35-25-40 $ 24 35.03mm 25.12mm 40.0mm TESK C 15 2 pa $6
B35G25G40 $ 25 35.08mm 25.14mm 40.0mm .15 kg TESK 2010 D 22 0 pa
B35G25G45 $ 32 35.08mm 25.14mm 45.0mm .16 kg JOHN DEERE = R72700 C 24 4 pa $10 R72700 310C Gosf$3.60
B36-25-33 $ 26 36.05mm 25.12mm 33.0mm O.S. TESK D 30 0 pa
B38G25G39 $ 30 38.0 mm 25.19mm 39.0mm 075 233 321 IHI D 35 0 pa
B52-25-26 $ 23 52.0 mm 25.08mm 25.4mm Z 10 0 pa

TO SUIT 1” DIAMETER SHAFT

B32-26-16 $ 22 1.250” 1.006” 0.63” . 04 kg G35361 A 253 75 pa $5
B32-26-20 $ 22 1.251” 1.006” 0.75” . 05 kg TESK A+200 150 pa $6
B32-26-26 $ 24 1.251” 1.006” 1.00” .06 kg TESK 2004 A 956 637 pa $4
B33-26-26 $ 25 1.254” 1.003” 1.00” .06 kg Heavy Press, Close Fit A 381 178 pa $5
B32-26-32 $ 25 1.251” 1.006” 1.25” . 07 kg TESK 2005 A 93 44 pa $6
B31-26-38 $ 13 1.248” 1.006” 1.50” . 09 kg AGRICULTURAL Z 62 0 pa
B32-26-38 $ 26 1.251” 1.006” 1.50” . 09 kg TESK 2005 C 113 20 pa $8
B32-26-45 $ 28 1.251” 1.008” 1.75” M.F. D 32 2 pa BUSHINGS
$9 M8038
B32-26-51 $ 31 1.251” 1.008” 2.00” .12 kg TESK 2005 BQuantity
35 22 Discounts
pa $9 Available only upon
B35-26-26 $ 29 1.377” 1.005” 1.00” . 09 kg TESK 2005 Brequest
162 30 provided
pa $7all outstanding invoices
B35-26-32 $ 30 1.377” 1.005” 1.25” TESK 2005 C 9 are
7 pasettled
$8 within 7 Days
B35-26-38 $ 32 1.377” 1.008” 1.50” TESK 2004 C 19 for6 10
Discount paor $8
more of any line item $ 3.00 ea
B35G26G38 $ 32 35.07mm 1.007” 38.0mm .13 kg JOHN DEERE = R99444 C 46 for6 20
Discount paor $9
more of any line item $ 4.00 ea
B36-26-25 $ 22 1.395” 1.012” 1.00” JOHN DEERE = U10482 Z 15 for0 30
Discount or more of any line item $ 5.00 ea
pa
B38-26-26 $ 33 1.502” 1.002” 1.00” . 07 kg TESK 2007 Discount
A 108 56 for 40 more of any line item $ 6.00 ea
paor $7
B38-26-38 $ 35 1.502” 1.008” 1.50” TESK 2006 C 26 6 pa $7
B38G26G50 $ 41 1.502” 1.004” 1.97” . 24 kg TESK 2007 B 37 14 pa $11
B38-26-51 $ 41 1.502” 1.002” 2.00” CH ENG C 37 3 pa $8
B40-26-50 $ 43 40.05mm 1.004” 1.97” TESK 2002 Minimum $150
D 30 4 pa $11
B40G26G51 $ 30 40.06mm 1.014” 2.00” 6 Only to Clear Z applies
6 0 pa before GST & Freight
B41-26-19 $ 22 1.625” 1.000” 0.75” 21 Only to Clear Z 21 0 pa
Tools and Accessories
Quantity
may be Discounts
used to Available
make up Only upon
request provided
Minimum Wholesaleall outstanding
Orders ofinvoices
$150
are settled
Prices subject within without
to change 7 Days notice
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Discount for 10 or more of any line item $3
Minimum $150
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au
Discount for 20 or more of any line item $5
Page 5forNovember
applies before GST & Freight Page 5 November 2013 Discount 30 or more of 2013
any line item $6
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 28mm DIAMETER SHAFT 5.0 mm Jobber Drill Bit $ 4.00 ea
PART No. PRICEOUTSIDE INSIDE LENGTH MANUFACTURE NOTES Stock 28-10-2013 JN30630,
CodeTL-C9LM050 JN31027
plus GST
EX GST Usage
Cost
Pack of Six $16.00 $ 14,581
B36-28-26 $ 27 36.04mm 28.02mm 25.4mm . 08 kg TESK 2009 C 80
Code: 16 pa $6 40 July,20 June to Giles Eng
B36-28-30 $ 27 36.04mm 28.02mm 30.0mm . 10 kg TESK 2009 C 81 TL6-C9LM050
4 pa $6

m
5.0 m
B36G28G39 $ 29 36.04mm 28.02mm 39.5mm . 12 kg TESK 2009 A 689 564 pa $8.50 JN30630 - 59943148 S’vik

TO SUIT 1.125” DIAMETER SHAFT

B35-29-29 $ 26 1.376” 1.130” 1.13” TESK 2001 C 37 16 pa $8 JN30631 - TWINE MCHY
B35-29-32 $ 33 1.385” 1.128” 1.32” TESK 2012 C 12 4 pa $8
B35-29-38 $ 26 1.376” 1.129” 1.50” TESK 2012 B 45 24 pa $9
B35G29G50 $ 23 1.376” 1.131” 1.96” $ REDUCED $ D 58 2 pa $9 TIMACK ENG
B37-29-26 $ 30 1.440” 1.129” 1.00” 11 only TO CLEAR Z 11 0 pa
B38-29-16 $ 33 1.516” 1.128” 0.62” TESK 2012 C 41 4 pa $7 JN30630 -
B38-29-25 $ 25 1.504” 1.132” 1.00” . 10 kg TESK 2004 D 36 0 pa

6.0 mm
sold 37 in one lot
B38-29-35 $ 24 1.502” 1.132” 1.37” TESK 2004 D 18 2 pa $7
B41-29-26 $ 30 1.627” 1.129” 1.00” 15 only TO CLEAR Z 15 0 pa

TO SUIT 30mm DIAMETER SHAFT

B35-30-30 $ 25 35.05mm 30.12mm 30.0mm . 06 kg SDK8 A 112 66 pa $7.50 JN30631 - DIGRITE
B35-30-40 $ 27 35.05mm 30.12mm 40.0mm . 08 kg Bobcat 320-BUSH-F,I,J A 106 42 pa $8.50 JN30905 - 6802217 Excavator
B35G30G40 $ 28 35.05mm 30.12mm 40.0mm . 08 kg Bobcat / Dakin Bucket D 25 2 pa $9
B35G30G45 $ 29 35.05mm 30.12mm 45.0mm . 08 kg Bobcat 330 C 42 5.033
m pa $10
B36-30-30 $ 26 36.05mm 30.12mm 30.0mm TESK 2004 D 23 0mpa DIGRITE

B36-30-40 $ 26 36.49mm 30.10mm 40.0mm . 10 kg TESK 2009 D 24 0 pa

B38-30-20 $ 24 38.05mm 30.10mm 20.0mm . 07 kg TESK 2004 A 111 46 pa $6 DIGRITE
B38-30-25 $ 25 38.06mm 30.09mm 25.0mm . 09 kg TESK 2011 D 19 0 pa
B38-30G30 $ 24 38.05mm 30.10mm 30.0mm . 10 kg 68721-66770 D 53 2 pa $7.50 DIGRITE
B38G30G30 $ 25 38.05mm 30.10mm 30.0mm TESK 2008 B 85 40 pa DIGRITE

B38-30-35 $ 27 38.05mm 30.10mm 35.0mm . 12 kg 68721-66522 A 91 14 pa $8

B38G30G35 $ 27 38.05mm 30.11mm 35.0mm TESK 2007 B 127 12 pa $8
B38G30-36 $ 21 38.0 mm 30.11mm 35.6mm . 12 kg JCB 231 02904 D 34 2 pa $7
B40G30G20 $ 30 40.08mm 30.12mm 20.0mm . 10 kg TESK 2012 C 15 16 pa $7
B40-30G22 $ 27 40.09mm 30.14mm 22.0mm . 10 kg 00021-30022 A 32 20 pa $7 5W INT. DIGRITE

B40-30-30 $ 27 40.08mm 30.11mm 30.0mm . 13 kg TESK 2011 C50 36 pa $7.50

B40-30G30 $ 28 40.07mm 30.12mm 30.0mm . 13 kg TYPE U A 21+120 120 pa
$7 6.0 mm JN31027
B40G30G30 $ 31 40.07mm 30.12mm 30.0mm . 125 kg 404 325 202 A 196 40 pa $7.50 DIGRITE 00021-00010
B40-30-33 $ 20 40.05mm 30.17mm 33.0mm 404 331 000 IHI D 209 2 pa $7 ORIG=30.20Ø
B40G30G35 $ 31 40.05mm 30.12mm 35.0mm .135 kg Bobcat 320 6539270 6.0 mm
A 82 60Jobber $ 5.00
pa $8 Drill Bit6539270 ea
= B40-30g39.7
CodeTL-C9LM060 plus GST
B40G30G40 $ 32 40.05mm 30.11mm 39.7mm . 17 kg 311541 21130 A 147 73 pa $8.50 332541-21240 1900-09920
B40-30x40 $ 29 40.10mm 30.13mm 40.0mm 404 331 000 C 98of46
Pack Sixpa $9
$23.00 FIG8 5Wx1 BLIND ONE END
B40G30G45 $ 33 40.05mm 30.12mm 45.0mm . 18 kg TESK 2005 CCode:
196 TL6-C9LM060
15 pa $9.50
B40-30-46 $ 31 40.05mm 30.11mm 46.0mm . 20 kg 404 324 600 IHI C 99 16 pa $9
B40-30-50 $ 32 40.05mm 30.12mm 50.0mm . 22 kg TESK 2011 C 38 12 pa $11
B42G30G40 $ 33 42.05mm 30.11mm 39.7mm . 15 kg O.S. TESK 2010 C 26 4 pa $8
B44G30G30 $ 30 44.45mm 30.15mm 30.0mm 9 ONLY Z 9 0 pa BUSHINGS
B47G30G31 $ 25 47.50 mm 30.23mm 30.0 mm 23 ONLY ZQuantity Discounts Available only upon
23 0 pa
request provided all outstanding invoices
TO SUIT 1.25” DIAMETER SHAFT are settled within 7 Days
B38-32-18 $ 26 1.502” 1.257” 0.70” . 05 kg 30634 B 40 15forpa
Discount $7more of any580K
10 or line FRONT BKT? 2005
item $ 3.00 ea
B38-32-22 $ 26 1.501” 1.256” 0.88” . 08 kg M.F. A 76 38 pa $8
B38G32G25 $ 31 1.502” 1.252” 1.00” . 07 kg TESK 2005 Discount
C 55 30 20 $7
forpa .50 of any line item $ 4.00 ea
or more
B38-32-27 $ 29 1.501” 1.258” 1.06” .07 kg M.F. A 46 40
Discount forpa
30 $7
or more of any line item $ 5.00 ea
B38-32-31 $ 19 1.505” 1.260” 1.20” . 09 kg AGRICULTURAL C 21 10
Discount forpa
40 $3 NO GRIND
or more of any line item $ 6.00 ea
B38-32-32 $ 29 1.502” 1.256” 1.25” . 09 kg TESK 2000 A 49 52 pa $7.50
B38-32-37 $ 30 1.502” 1.256” 1.50” . 11 kg TESK 2000 A 51 30 pa $8
B38G32G38 $ 32 1.502” 1.253” 1.50” .10 kg TESK 2005 A 42 42 pa $9 4x(CHAM51662=B38-32H38 1x6Ø)
B38G32G44 $ 35 1.501” 1.256” 1.74” .12 kg TESK 2009 C 27 16 pa $10
B38G32G45 $ 18 1.490” 1.247” 1.75” JOHN DEERE T41961 Z 23 0 pa
Minimum $150
No Discount
B38G32G50 $ 40 1.501” 1.258” 1.96” .14 kg TESK 2000 B 53 24 pa $11 M8014=GRV OPTIONAL
B38G32G63 $ 46 1.502” 1.258” 2.50” .18 kg TESK 2012 applies
A 73 48 pa before
$13 GST & Freight
Tools and Accessories
Quantity
may beDiscounts
used toAvailable
make up Only upon
Minimum Wholesale Orders ofinvoices
request provided all outstanding $150
are to
Prices subject settled
changewithin 7 Daysnotice
without
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Discount for 10 or more of any line item $3
Minimum $150
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au
Discount for 20 or more of any line item $5
Page 6 November 2013
applies before GST & Freight Page 6 November 2013 Discount for 30 or more of any line item $6
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 1.25” DIAMETER SHAFT (Continued)
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES 5.0 mm Cobalt
Stocktake Jobber
28-10-2013 Drill Bit
- JN30917
CardedUsage
EX GST $ 7.00 ea
Cost
CodeTL-9LM050Co plus GST $ 8,004
B40-32-26 $ 27 40.03mm 1.251” 0.99” was B40-31-25 01758059-0061 B 76 38 pa $7 . 09 kg JOY : 1.2495TO 1.2505
B40-32-32 $ 27 40.03mm 1.254” 1.25” . 11 kg TESK NOV 2009 C 27 7 pa $8
B40-32-40 $ 29 40.03mm 1.254” 1.58” . 15 kg SPL Pack
A 49of36
Six pa$32.00
$9 TINK’s

m
. 18 kg Cat247B Skid Steer Loader Code:
C 11 9 pa $11

5.0 m
B40-32-50 $ 34 40.03mm 1.254” 1.97”
TL6-9LM050Co
B42-32-12 $ 24 1.6275” 1.253” 0.47” . 05 kg 64 HRC D 24 0 pa 145 to Bohle Hydraulics JN0214
B42-32-32 $ 28 1.627” 1.255” 1.25” . 13 kg D33827 A 85 60 pa
B42-32-38 $ 32 1.627” 1.255” 1.50” . 16 kg TESK 2004 A 18 46 pa $8
B42-32-48 $ 40 1.627” 1.256” 1.87” . 20 kg TESK 2004 C 40 23 pa $9
B42G32G51 $ 42 1.627” 1.256” 2.00” . 20 kg TESK 2012 C 16 8 pa
B44-32-32 $ 32 1.752” 1.256” 1.25” . 19 kg TESK 2009 A 34 30 pa $8
B44-32-51 $ 37 1.752” 1.257” 2.00” . 30 kg TESK 2006 C 5 18 pa $9
B44G32G51 $ 41 1.752” 1.256” 2.00” . 30 kg TESK 2008 B 73 37 pa $11 JN30916
B44-32G76 $ 57 1.751” 1.256” 3.00” . 45 kg TESK 2001 C 23 7 pa $12 JN30916
B51-32-26 $ 39 2.002” 1.259” 1.00” . 24 kg Heavy Wall Bush B 63 42 pa $10
B51-32-51 $ 50 2.001” 1.258” 2.00” Heavy Wall Bush C 15 7 pa $10
B55G32G66 $ 54 55.07mm 1.259” 66.0mm R81853 D 16 2 pa $12 Move From Z To Main Store!

6.0 mm
B45-33-44 $ 40 44.90mm 32.80mm 44.0mm . 26 kg SPECIAL 2013 D 24 0 pa Purcells

TO SUIT 35mm DIAMETER SHAFT 5.0 m

m
B40-35-25 $ 29 40.05mm 35.10mm 25.0mm . 06 kg Bobcat - 331-H B 36 4 pa $6
B40-35-30 $ 30 40.03mm 35.10mm 30.0mm . 07 kg 90387 35003 71 A 139 31 pa $7 TOYOTA, DIGRITE
B40-36-30 $ 18 40.03mm 35.36mm 30.0mm . 07 kg Large Bore Clearance Z 76 0 pa MISTAKE
B40-35-50 $ 34 40.01mm 35.11mm 50.0mm . 12 kg Toyota 35DK8, 331-Bush-J C 112 2 pa $10 DIGRITE AVANT
B40G35G50 $ 37 40.01mm 35.11mm 50.0mm . 12 kg Bobcat-331-BUSH-HR C pa $
B45-35G29 $ 26 45.10mm 35.17mm 29.2mm . 14 kg 404 323 109 C 25 6 pa $7 INT G6
B45-35-30 $ 25 45.05mm 35.11mm 30.0mm TESK 2005 B 73 35 pa $7
B45G35G30 $ 29 45.05mm 35.12mm 30.0mm . 15 kg 404 330 200 IHI B 38 16 pa $7 550831-11130=B45-354G31
B45-35G35 $ 29 45.06mm 35.13mm 35.0mm . 17 kg PC20-BUSH-H,I,J,K B 67 12 pa $8 33811-11260,404 323 105
B45-35-35 $ 29 45.05mm 35.11mm 35.0mm . 18 kg TESK 2008 B 43 17 pa $8
B45G35G35 $ 31 45.05mm 35.10mm 35.0mm . 17 kg PC20-HR A 85 32 pa $9
B45G35-35 $ 29 45.05mm 35.11mm 35.0mm NO INTERNAL GROOVE D 16 0 pa AVANT
B45-35X35 $ 36 45.04mm 35.22mm 34.9mm . 17 kg 68741-66630 C 18 14 pa $11 KUBOTA KX71was 45.03 x 35.29
B45-35G38 $ 31 45.05mm 35.10mm 38.0mm 550811-11190 C 20 10 pa $8
B45G35G40 $ 32 45.05mm 35.10mm 40.0mm . 19 kg 550901-12240 A 58 24 pa $9 B45-35-40=550901-12240

B45G35G44 $ 32 45.06mm 35.36mm 44.0mm . 20 kg H149680 D 29 2 pa $9 USE B45G35G45

B45G35G45 $ 33 45.06mm 35.12mm 44.0mm . 22 kg 19000-12002 A 51 32 pa $9 6.0 mm
B45-35-49 $ 34 45.05mm 35.11mm 49.0mm . 24 kg TESK 2009 C 46 16 pa $9 00024-00044=O/BF8
B45-35-50 $ 38 45.04mm 35.05mm 50.0mm . 25 kg EN36A C 18 4 pa Purcells JN0225
B45G35G50 $ 38 45.05mm 35.11mm 50.0mm . 25 kg 01009-01012 6.0
B 36mm40Cobalt
pa $10Jobber Drill Bit
550901-122250, 331831-11130
Carded $ 9.00 ea
B47G35G35 $ 36 47.05mm 35.13mm 35.0mm O.S. TESK D 11 2 pa $7
CodeTL-9LM060Co plus GST
B47G35G45 $ 36 47.05mm 35.15mm 45.0mm . 25 kg O.S. TESK C 14 10 pa $7
B50G35G55 $ 48 50.05mm 35.15mm 55.0mm . 38 kg O.S. TESK 2012 C 15 6 pa $8
B53G35G45 $ 64 53.12mm 35.10mm 45.0mm Mainline 3 holes Pack
C 26of Six $42.00
4 pa $13 Sandvik
Code: TL6-9LM060Co
TO SUIT 1.50” DIAMETER SHAFT
DISCOUNT FOR QUANTITY
B44-38-25 $ 31 1.751” 1.506” 1.00” . 08 kg TESK 2003 A 49 57 paBUSHINGS
$6
B44-38-29 $ 26 1.751” 1.509” 1.13” . 09 kg MF 846002M1 C 34 8 pa $5
B44-38-32 $ 30 1.751” 1.506” 1.25” TESK 2003 BQuantity
44 31Discounts
pa $8 Available only upon
OLD STOCK = 1.511” 2006
B44G38G32 $ 34 1.751” 1.506” 1.25” . 11 kg TESK 2011 request
C 48 18provided
pa $9all outstanding invoices
B44-38-38 $ 36 1.751” 1.507” 1.50” TESK 2005 A 115 20 arepa
settled
$9 within 7 Days
Discount for 10 or more of any line item $ 3.00 ea
B44G38G38 $ 38 1.751” 1.507” 1.50” . 13 kg TESK 2011 C 48 for
Discount 4820pa
or more of any line item $ 5.00 ea
B44-38-45 $ 37 1.751” 1.508” 1.75” TESK 2007 C 27 for430paor more
Discount $6 of any line item $ 6.00 ea
B44G38G45 $ 40 1.751” 1.504” 1.75” . 16 kg TESK 2004 C 178 8 pa $7
B44-38-50 $ 44 1.752” 1.503” 1.97” TESK 2006 B 28 23 pa $8
B44G38G50 $ 43 1.753” 1.504” 1.97” . 17 kg TESK 2002 C 34 22 pa $9
B45-38-21
B45-38G25
$ 18
$ 18
1.774”
1.779”
1.500”
1.505”
0.85” No Discount
1.00” No Discount
JOHN DEERE = H145069
JOHN DEERE = U42465 Z 12
Minimum $150
Z 34 Nil pa
3 pabefore GST & Freight
Moove to Z store
applies
B45-38-32 $ 31 1.775” 1.510” 1.25” . 12 kg O.S. TESK D 46 0 pa
QuantityTools and Accessories
Discounts Available Only upon
request providedused
may be to make invoices
all outstanding up
Minimum Wholesale Orders of $150
are settled within 7 Days
Prices subject to change without notice
Discount for 10 or more of any line item $3
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au
Discount for 20 or more of any line item $5
Page for
7 November 2013
applies before GST & Freight Page 7 November 2013 Discount 30 or more of any line item $6
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 38mm & 1.50” DIAMETER SHAFT (Continued)
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES
Stocktake 30-10-2013
EX GST Usage
DRILL 11/32”
Cost $ 6,148
B46-38-62 $ 47 46.05mm 1.506” 2.44” O.S. TESK 2003 08 C 6Long
HSS pa Series
$10 34 in 10 years
B46-38-76 $ 62 46.05mm 1.506” 3.00” . 32 kg O.S. TESK 2008 C 17
For18
Zerkpa $12 Fitting
B47-38G45 $ 68 47.02mm 38.08mm 44.8mm . 21 kg VME12 FeedExtCylRod B 35 35 paGrease
$12 Svik 3176 7714 00 4mm Int groove
135 degrees Split Point
B48-38-18 $ 22 1.876” 1.509” 0.69” CASE - D30930 D Titanium
2 1 pa CASE $17.64 =1.511”
Nitride Coated
B48-38-20 $ 20 1.868” 1.500” 0.80” . 10 kg JOHN DEERE - U40308 Z 22 0 pa
B48-38-25 $ 27 1.876” 1.510” 1.00” . 12 kg D31140 - CASE 455C $ 22.00
D 51 0 pa ea plus GST 4-IN-1
B48-38-29 $ 26 1.876” 1.509” 1.13” . 14 kg CASE - D30932, D37763 C 138 0 pa
B48-38-32 $ 28 1.876” 1.509” 1.25” . 17 kg CASE - D30933 A 71 39 pa $9
Code: TL-9ELI1132
B48G38G32 $ 32 1.876” 1.509” 1.25” . 15 kg JOHN DEERE - U10616 D 7 pa $9 60 in 9 years
B48G38G33 $ 35 48.05mm 38.15mm 33.00mm METRIC 2011 VIO40 C 25 0 pa
B48-38-37 $ 31 1.877” 1.506” 1.48” . 19 kg TESK 2009 6 Pack
A 78 32 pa $9
B48G38G38 $ 31 1.877” 1.508” 1.50” . 18 kg 2x5Ø HOLES C 18 4 pa11/32”
DRILLS $9 M8017 was $28 @ 3/8/10
B48-38-39 $ 34 1.876” 1.509” 1.53” . 20 kg D30929 & D49429 A 66 78 pa $10 CASE $30.10 =1.512”
$ 106.00 / 6
B48G38G40 $ 35 48.05mm 38.15mm 40.00mm . 21 kg METRIC 2005 C 41
Code:8 TL6-9ELI1132
pa
B48G38G45 $ 36 48.05mm 38.15mm 45.00mm METRIC - VIO20 - 2010 C 12 8 pa $12
B48-37-45 $ 18 1.870” 1.490” 1.75” . 23 kg 5717692 - SCATRAK Z 22 0 pa
B48G38G49 $ 32 1.878” 1.507” 1.93” . 24 kg TESK 2009 D 37 0 pa
B48-38G50 $ 36 48.05mm 38.15mm 50.0mm METRIC 2011 C 19 9 pa $10
B48-38-51 $ 38 1.877” 1.506” 2.00” . 26 kg TESK 2009 A 25 20 pa $12
B48-38G55 $ 32 48.05mm 38.15mm 55.0mm METRIC - VIO20 D 40 0 pa YANMAR VIO20 1998
B48G38G55 $ 32 48.05mm 38.15mm 55.0mm METRIC - 2011 C 24 8 pa
B48-38-70 $ 46 1.876” 1.512” 2.75” . 31 kg D30931 C 23 1 pa $10 CASE $44.85 2/2000

B50G38G49 $ 36 50.07mm 38.14mm 49.00mm . 30 kg METRIC 2008 C 22 6 pa $10 DIGRITE 08

B50-38-57 $ 34 50.06mm 1.500” 2.24” H145104 D 18 0 pa 670B 672B

B51-38-26 $ 31 2.002” 1.506” 1.00” . 17 kg TESK 2000 A 63 26 pa $8

B51G38-29 $ 22 2.0025” 1.507” 1.13” . 17 kg For Caterpillar - 7 K 9 5 9 2 C pa $6 6wExt,CE $5.90
B51-38-31 $ 32 2.002” 1.509” 1.24” TESK 2007 C 73 10 pa $8
B51G38G32 $ 34 2.002” 1.508” 1.25” TESK 2000 B 42 12 pa $10
B51-38-35 $ 35 2.002” 1.507” 1.37” . 24kg LENGTH = 34mm C 40 10 pa $10 Should be 34.8mm long
B51-38-37 $ 34 1.990” 1.497” 1.48” JOHN DEERE - T41954 DCARBON
14 0 pa TAP
1/8” x 27 NPS
B51G38G38 $ 36 1.990” 1.497” 1.50” JOHN DEERE - T41963 D 8 0 pa
B51G39G38 $ 35 2.002” 1.509” 1.50” . 25kg TESK 2003 CBottoming
39 12 paTap $9
for
B51-38-39 $ 33 2.002” 1.508” 1.50” For Caterpillar - 5 D 4 5 4 1 CZerk
65 Grease
8 pa Fitting
$8 CHECK DIA FOR CAT 5D4541
B51-38-44 $ 17 1.993” 1.515” 1.75” . 29kg JD Y1951CU Z 15 0 pa
B51G38G44 $ 15 1.998” 1.518” 1.75” . 28kg JOHN DEERE - T33536 Z$1322.00
0 pa ea
B51-38-45 $ 28 2.002” 1.508” 1.75” . 31kg TESK 2008 CCode:
35 36 pa $9
TL-NPSFCB18
B51G38G45 $ 35 2.002” 1.508” 1.75” TESK 2003 D 49 0 pa EMU BAY 22 PER TIME
B51-38-51 $ 38 2.002” 1.510” 2.00” . 35kg TESK 2009 ACARBON
33 14 pa $11
TAPS
B51G38G51 $ 41 2.002” 1.510” 2.00” . 35kg TESK 2000 A 66 64 pa $12
B51G38G60 $ 52 2.002” 1.505” 2.37” . 40kg TESK 2000 A662
Pack;
18 $pa
98.00
$14/ 6
B51-38-63 $ 35 1.992” 1.520” 2.50” . 42kg JOHN DEERE - T101148 DCode:
16 TL6-NPSFCB18
0 pa
B51G38G63 $ 42 2.002” 1.510” 2.48” TESK 2007 C 24 14 pa $14
B51G38G70 $ 63 2.002” 1.506” 2.75” TESK 2011 A 69 8 pa $17 Hydraulic Hotline
B51G38G76 $ 58 2.002” 1.508” 3.00” .51 kg TESK 2004 C 20 7 pa $15
B51G38G102 $ 72 2.002” 1.509” 4.00” .69 kg TESK 2004 C 36DISCOUNT
6 pa $22FOR QUANTITY
B52G38G38 $ 38 2.049” 1.508” 1.50” O.S. TESK 2007 Z 20 0 pa BUSHINGS
B53G38G38 $ 42 2.063” 1.509” 1.50” O.S. TESK 2007 CQuantity
19 4 Discounts
pa $9 Available only upon
B54-38-25 $ 38 2.126” 1.504” 1.00” .23 kg TESK 2010
request provided all outstanding invoices
B 26 4 pa $8 Woodtech Eng 07 4123 1136
B54-38-49 $ 46 2.126” 1.504” 1.94” .45 kg TESK 2010 C 10 4are pasettled within 7 Days
Woodtech 2.1255”x 1.5035x 1.937”
B54-38-53 $ 56 2.128” 1.501” 2.08” . 50kg A2U913-194145 New ADiscount
26 0for pa10 or moreSvik;2.1275”Dia
of any linexitem 3.00 eaK,S3
1.501”$Dia,29HRC
B54-38-54 $ 56 2.125” 1.501” 2.13” . 50kg A2U913-194145 Old A 78 10for 20
Discount pa or$13
more of any line item
37HRC $ 5.00PG70
1.500-2 ea
B54-38H82 $ 70 2.127” 1.504” 3.23” 2 x 16 hole A2U913-194264 .71 kg B 45 12for 30
Discount pa or$20
more of any line itemC=23 $ 6.00D=16eax2
B54-38H90 $ 84 2.127” 1.504” 3.54” 2 x 16 hole A2U913-194197 .78 kg B 31 10 pa $22 C=30 D=16 x 2

B55G38G51 $ 44 55.09mm 1.509” 2.01” JOHN DEERE - 82942 B 14 4 pa $12

B57G38G43
B57-38-51
$ 30
$ 37
2.243”
2.252”
1.508”
1.508”
1.69”
2.00”
JD - T126936 - T47070
TESK 2009 Minimum $150
Z 90 0 pa
C 2 pa $11
B60-37-37 $ 28 2.365” 1.451” 1.46” JOHN DEERE - T81452 applies
Z 11 before GST & Freight
0 pa
Tools Discounts
Quantity and Accessories
Available Only upon
may be
request usedalltooutstanding
provided make upinvoices
Minimum Wholesale Orders
are settled within 7 Daysof $150
Prices subject
Discount to or
for 10 change
more ofwithout
any linenotice
item $3
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Discount for 20 or more of any line item $5
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au Page 8 forNovember
applies before GST & Freight Page 8 November 2013 Discount 30 or more of2013
any line item $6
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 40mm DIAMETER SHAFT
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES Stocktake at 30-10-2013 JN30918
EX GST Usage
6.8mm Jobber Drill Bit HSS
Cost Coated $ 6,888
B44-40-25 $ 36 44.05mm 40.05mm 25.0 mm . 06 kg MOUNT ISA CTitanium
43 8 paNitride
$7
B44-40-30 $ 36 44.05mm 40.05mm 30.0 mm . 07 kg MOUNT ISA C135
37degrees
2 pa split
$7 point
B44-40-47 $ 24 44.88mm 40.08mm 47.0 mm T140207 $Z 6.00 ea plus GST
4 0 pa
B45-40-38 $ 35 45.05mm 40.10mm 38.0 mm . 10 kg TESK 2012 DCode:
24 2TL-9LM068
pa $8
B45-40-47 $ 40 45.05mm 40.10mm 47.0 mm . 12 kg TESK 2004 C 113 10 pa $10

6.8 mm
B48-40-20 $ 29 48.04mm 40.05mm 20.0 mm . 085 kg 55023390 A 6106 106 pa $7
Pack S’VIK $167.30
B48-40-30 $ 29 48.03mm 40.09mm 30.0 mm . 13 kg 49852501 A 58 22Drills
Jobber pa $8 MT.ISA SVIK 4985 2501
B48-40-38 $ 23 1.875” 40.20mm 38.1 mm 580 LOADER D 21 0 pa $8 G108507 CASE $21
B48G40G60 $ 54 48.05mm 40.12mm 60.0 mm . 26 kg TESK 2004 B$ 50
25.00
10/pa
6 $13 suits Kobelco
Code:
B50-40G24 $ 30 50.10mm 40.17mm 24.26mm . 13 kg 404 323 101 ATL6-9LM068
64 36 pa $7 IHI35J-BUSH-HL INT 4
B50-40-28 $ 31 50.03mm 40.20mm 28.0 mm . 16 kg D129264 A 13 14 pa $7 580SLE LOADER BKT
B50G40G30 $ 36 50.05mm 40.10mm 30.0 mm . 16 kg TESK 2012 C 29 3 pa $8
B50-40-32 $ 29 50.00mm 40.23mm 32.0 mm CASE 580K - E172051 Use
C 1 For
10 pa $7
B50-40G32 $ 29 50.03mm 40.16mm 31.9 mm . 18 kg 68741-66770 B8mm
28 x61.25
pa Tap
$7 KUBOTA KX71 INT 6W

B50G40G34 $ 34 50.05mm 40.11mm 34.6 mm 353541-21130 A 80 24 pa $8 +772 Z STORE 352541-21160

B50-40-35 $ 30 50.03mm 40.18mm 34.8 mm 580 SLE C 58 13 pa $8 580 SLE=40.20
B50-40G39 $ 32 50.10mm 40.18mm 39.2 mm .22 kg IHI35J-BUSH- H,I,J,K,G B 50 15 pa $10 404 323 104 IHI
B50-40-39 $ 24 50.05mm 40.17mm 39.5 mm 68741-6677-0 C 127 8 pa $10 KX41 ORIG =33.5 + RECESS
B50-40-40 $ 35 50.05mm 40.29mm 40.0 mm .22 kg R72579 B 15 2 pa $10 ORIGINAL = 40.40

B50G40G40 $ 39 50.05mm 40.11mm 40.0 mm . 22 kg IHI35J-BUSH-HR A 128 84 pa $10 TAKEUCHI 075 224 221 IHI
B50G40G45 $ 39 50.05mm 40.12mm 45.0 mm .24 kg IHI35J A 95 40 pa $11 TAKEUCHI 075-224 021 IHI
B50G40X45 $ 46 50.05mm 40.15mm 45.0 mm OF8/BF8 C 41 6 pa $13 075 223 923 : BF8
B50-40-50 $ 42 50.05mm 40.17mm 50.0 mm . 28 kg 68351-6776-0 B 45 25 pa $10 KX71 Orig =43 wide + recess
B50G40G50 $ 42 50.05mm 40.17mm 50.0 mm . 27 kg 68351-6777-0 A 122 56 pa $11 KX71 321811-11150=B50-40G50

B50G40G60 $ 44 50.10mm 40.17mm 60.0 mm . 32 kg TESK NOV 2009 A 48 16 pa $13 Eureka Tool
B50G40G62 $ 44 50.09mm 40.12mm 62.0 mm .33 kg R81488 B 23 33 pa $13
B50G40G67 $ 40 50.09mm 40.28mm 67.0 mm JOHN DEERE T100240 C 4 8 pa $13
B50-40-70 $ 42 50.01mm 40.23mm 70.0 mm .39 kg D129240 CASE 580K C 41 4 pa $15
B50G40G80 $ 64 50.10mm 40.17mm 80.0 mm . 44 kg TESK 2013 D 30 0 pa $17
B50-40G100 $ 69 50.10mm 40.25mm 100.0 mm JOHN DEERE T76638 D 23 2 pa $18
B51-40-38 $ 35 2.002” 40.17mm 38.0 mm O.S. TESK 2007 D 20 4 pa $11
B51G40G50 $ 42 2.002” 40.16mm 50.0 mm O.S. TESK 2007 A 94 8 pa $12
B52-40-50 $ 47 52.07mm 40.14mm 50.0 mm . 34 kg O.S. TESK 2009 C 5 9 pa $10
B53-40-38 $ 38 53.08mm 40.26mm 38.1 mm $ REDUCED $ D 4 pa $11 9R0111 CE$11.04 9/4/10
B53G40G50 $ 45 53.08mm 40.16mm 50.0 mm . 37 kg O.S. TESK 2011 DTAP
14 10 pa $12 $15.00
B55-40-30 $ 30 55.01mm 40.22mm 30.0 mm .26 kg D136570 580SLE D 22 - 0High
pa Speed Steel ORIG.=55.00mm
B55G40X45 $ 53 55.06mm 40.16mm 45.0 mm . 36 kg BLIND FIG8 8mm x 1.25
D 27 0 pa $15Intermediate
Including 25Plus GST
Unwrapped
B55G40G65 $ 54 55.07mm 40.22mm 65.0 mm . 56 kg R81849 CCode:
24 TL-CMCHI080
8 pa $13 315 WAS 40.28
B56-40-50 $ 47 56.05mm 40.12mm 50.0 mm .47 kg TESK 2006 A 98 46 pa $12 ZEMEK ENG /SWIFT ENG

B57-40-23 $ 34 56.56mm 40.11mm 22.7 mm .24 kg G108526 580K 6 Pack

D 13 0 pa WITHOUT RECESS
B57-40-24 $ 35 56.68mm 40.21mm 24.0 mm . 25 kg 1542668C1 TAPS
C 5 -4HSS
pa $7 CASE $ 70.00
$50.30/ 6 NO RECESS
B60-40-32 $ 50 60.10mm 40.15mm 32.0 mm . 32 kg HEAVY WALL TESK 2013 D +16 x01.25
8mm pa Intermediate
B60-40-45 $ 59 60.10mm 40.15mm 45.0 mm . 57 kg HEAVY WALL TESK 2010 DCode:
19 TL6-CMCHI080
2 pa $10 Mainline Boring Paul Dimarco
B60F40-43 $ 50 60.**mm 40.**mm 43.0 mm FLANGE BUSH Z 4 0 pa
B60G40G50 $ 59 60.08mm 40.17mm 50.0 mm HEAVY WALL C 18 0 pa Husky Skid Steer,Karl 039792 0075
B60G40G60 $ 62 60.08mm 40.17mm 60.0 mm . 73 kg HEAVY WALL TESK 2009 C 11+20 6 pa $12
B70G40G120 $158 70.00mm 40.10mm 120.0 mm 2.41 kg HEAVY WALL TESK 2009 D 3 1 pa $16
BUSHINGS
TO SUIT 1.75” DIAMETER SHAFT Quantity Discounts Available only upon
request provided all outstanding invoices
B51-44-38 $ 39 2.002” 1.759” 1.50” . 14 kg MF B 36 22 pa
are$10
settled within 7 Days M8032
B51G44G44 $ 40 2.001” 1.754” 1.75” TESK 2004 CDiscount
29 5 forpa10
$11
or more of any line item $ 3.00 ea
B51-44-51 $ 48 2.002” 1.756” 2.00” . 19 kg TESK BDiscount
54 30forpa20
$12
or more of any line item $ 5.00 ea
B51G44G51 $ 48 2.002” 1.756” 2.00” . 19 kg TESK 2011 D 22 0 pa $12
Discount for 30 or more of any line item $ 6.00 ea
B54-44-16 $ 21 2.125” 1.761” 0.62” G33858 D 0 pa
B54-44-22 $ 25 2.126” 1.758” 0.88” . 12 kg D33047 & D46405 D 32 0 pa G34845
B54-44-26 $ 25 2.125” 1.760” 1.01” D34340 C 42 8 pa $7
B54-44-29
B54-44-30
$
$
24
26
2.125”
2.125”
1.761”
1.757”
1.12”
1.19”
. 16 kg D35071 CASE 455C
. 16 kg D94018 CASE 580K Minimum $150
D 7 0 pa
C 50 0 pa
4-IN-1

B54-44-31 $ 27 2.125” 1.760” 1.25” . 16 kg D37392 Z 8 applies

4 pa $4 before GST & Freight
B54-44-32 $ 14 2.118” 1.760” 1.25” No Discount 28 to CLEAR U43495 Z 28 0 Tools
pa and Accessories 1.757-1.761
B54G44-35 $ 26 2.125” 1.761” 1.38” . 18 kg CHAM 62243 C 1 1maypa be$4 used
Ext Identification Groove 3mm
to make up
Quantity Discounts
Minimum Wholesale Available Onlyofupon
Orders $150
requestsubject
Prices providedtoallchange
outstanding invoices
without notice
are settled within 7 Days
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au
Discount for 10 or more of any line item $3
Page 9for November 2013
applies before GST & Freight Page 9 November 2013 Discount 20 or more of any line item $5
Located in the Newcastle - Sydney Region - Australia Discount for 30 or more of any line item $6
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 1.75” DIAMETER SHAFT (Continued)
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES
Stocktake
8.5mm Jobber 30-10-2013
Drill BitJN30918
HSS
EX GST Usage
Cost Titanium Nitride Coated $3,675
B54-44-37 $ 41 2.126” 1.753” 1.50” TESK 2004 A135
65degrees
18 pa split
$10point
B54-44-38 $ 17 2.115” 1.750” 1.48” No Discount 56 to CLEAR U43636 Z$56 9.00 ea plus GST
0 pa
B54-45-38 $ 34 2.118” 1.760” 1.50” U16088 D 1 TL-C9LM085
Code: 1 pa $7
B54-44-39 $ 32 2.125” 1.761” 1.50” D34354 CASE 455C C 22 6 pa $8 4-IN-1
B54G44G38 $ 43 2.126” 1.754” 1.50” . 21 kg TESK 2006 B 30 12 pa $8

8.5 mm
B54G44G44 $ 36 2.126” 1.754” 1.75” TESK 2005 C6 Pack
23 6 pa $8
Jobber Drills
B54G44G51 $ 22 2.118” 1.765” 2.00” . 28 kg T42080 - 670B - 672B D$ 51
42.00 0/ 6pa
B54G44G52 $ 46 2.126” 1.753” 2.00” . 28 kg TESK 2005 A 67 26 pa $13
B54-44-58 $ 48 2.126” 1.759” 2.25” . 30 kg D42788 Code:
A 68 36 pa $13
B55G44G45 $ 35 55.07mm 1.761” 1.77” H145630 TL6-C9LM085
Z 2 0 pa
B55G44G66 $ 48 55.07mm 1.761” 66.0mm . 41 kg R89940, 670B, 672B C 4 4 pa $13
B57-44-19 $ 18 2.251” 1.761” 0.75” CASE = D40243 Use
Z 9 For0Tappa
B57-44-24 $ 29 2.250” 1.761” 0.94” . 19 kg D61241 480B Ft Stg Axle 10mm
C 1 x11.5 pa $8
B57-44-25 $ 13 2.242” 1.760” 1.00” No Discount JOHN DEERE - U42219 Z 18 0 pa 570g
B57-44-26 $ 33 2.250” 1.760” 1.00” . 20 kg D43940 - 480B Ft Stg Axle C 32 3 pa $9
B57-44-27 $ 16 2.242” 1.770” 1.06” No Discount JOHN DEERE - T159279 Z 16 0 pa
B57-44-28 $ 22 2.251” 1.759” 1.10” . 22 kg D127172, 107124A1 C 27 4 pa $8 580K

B57-44-29 $ 17 2.243” 1.765” 1.12” No Discount JOHN DEERE - U10481 Z 22 0 pa

B57-44-30 $ 33 2.250” 1.760” 1.14” . 24 kg 107124A1 D 21 0 pa ORIG. = 2.249”
B57-44-32 $ 34 2.251” 1.761” 1.25” . 25 kg D37495 - J.Deere T140669 C 21+40 30 pa $8 FORD BH BKT
B57-44-33 $ 20 2.243” 1.760” 1.26” JOHN DEERE - T25898 Z 10 0 pa
B57-44-34 $ 30 2.251” 1.759” 1.36” CASE 580 SLE D 12 0 pa $8
B57-44-35 $ 30 2.240” 1.757” 1.38” .25 kg JOHN DEERE - T114515 C 3 3 pa $8
B57-44G35 $ 26 2.253” 1.757” 1.38” CAT950-BUSH-Stg D2 0 pa 7J9688 CE$8.84
B57-44-36 $ 30 2.251” 1.757” 1.39” . 25 kg CAT - 7K9589 C 14 3 pa $9
B57G44G38 $ 18 2.240” 1.748” 1.50” No Discount JOHN DEERE - T41976 D 63 0 pa
B57G45G38 $ 18 2.243” 1.765” 1.50” No Discount JOHN DEERE - U16070 Z 18 0 pa 260g
B57-44-39 $ 36 2.252” 1.756” 1.50” . 30 kg CASE - D50146 - TESK 2006 B 40 10 pa $11
B57-44-42 $ 36 2.251” 1.760” 1.65” . 34 kg CASE = D55626 D 8 4 pa $8
B57-44-43 $ 16 2.240” 1.767” 1.70” No Discount 50 to CLEAR - T34301 Z 51 0 pa TO BE DISCONTINUED 320g
B57-44-44 $ 25 2.252” 1.756” 1.75” . 35 kg TESK 2004 C 19+24 18 pa $11
B57-44-45 $ 18 2.243” 1.760” 1.77” No Discount JOHN DEERE - T25875 Z 38 0 pa 325g
B57G44G45 $ 42 2.251” 1.756” 1.75” . 36 kg TESK 2012 C 26 0 pa $14
B57G44-46 $ 18 2.243” 1.770” 1.81” No Discount JOHN DEERE - U16017 Z 22 0 pa 333g

B57G44G46 $ 19 2.240” 1.765” 1.81” No Discount JOHN DEERE T34414 TAP

Z 8 - High
0 pa Speed Steel $21.00 333g
B57-44-50 $ 18 2.250” 1.765” 1.97” No Discount REDUCED to CLEAR D10mm
72 x01.5 pa TO BE DISCONTINUED
Intermediate Plus GST370g
B57-44-51 $ 40 2.252” 1.756” 2.00” . 40 kg CAT 953 A 53 25 pa $13
B57G44-52 $ 40 2.250” 1.760” 2.06” OFF-SET GROOVE 2:5:12 DCode:
17 TL-CMCHI100
0 pa D129061 C12M7D5
B57-44-56 $ 15 2.242” 1.770” 2.20” No Discount JOHN DEERE - T113755 Z 16 0 pa 415g
B57G44G57 $ 42 2.252” 1.756” 2.25” . 44 kg TESK 2004 A6 44
Pack10 pa $14
B57G44-59 $ 38 2.251” 1.758” 2.34” T 7K0085 - CAT-950-BUSH-J C 6 - 0HSS
TAPS pa =B57G44-59.4
$ 94.00 / 10w
6 Ext CE$11.34
B57G44G60 $ 46 2.251” 1.755” 2.37” .46 kg TESK 2005 C10mm
19 x81.5paIntermediate
$16
B57-44-60 $ 48 2.252” 1.756” 2.37” . 48 kg TESK 2009 CCode:
32 TL6-CMCHI100
12 pa $15
B57G44G63 $ 46 2.251” 1.757” 2.46” .49 kg 2K4504 C 22 4 pa $16 = B63-44G63 CE 24.80
B57-44-70 $ 30 2.250” 1.760” 2.75” .53 kg CASE = D121845 C 68 6 pa $17 Curtis made 16 by mistake
B57G44G70 $ 58 2.252” 1.756” 2.75” .53 kg TESK 2013 C 14 0 pa Hayward Hydraulics requested
B57G44G76 $ 64 2.252” 1.756” 3.00” .58 kg TESK 2011 C 16DISCOUNT
0 pa $18 FOR QUANTITY
B57-44-80 $ 48 2.258” 1.752” 3.13” . 64 kg 8J6535 C 9 8 pa BUSHINGS
$17 CAT615,623 Scrapers With 8J6536
B57G44G92 $ 51 2.243” 1.765” 3.62” T59506 - 670B 672B Quantity
D 12 Discounts Available only upon
0 pa
B57-44-94 $ 51 2.250” 1.756” 3.70” 580SK-BUSH-J-Old Crequest
12 2provided
pa $14all outstanding
580K Was D127168 invoices
580SK “J”
B57G44G94 $ 49 2.251” 1.756” 3.70” TESK 2004 C 13 0 pa are settled within 7 Days
B57T44-104 $ 68 2.250” 1.755” 4.10” . 79 kg 580SK-BUSH-J-New DDiscount
16 2forpa 10 or
$15more of307186A1
any line item $ 3.00
K9x20deg TO ea
51Ø
B57-44G125 $ 90 2.251” 1.756” 4.92” 580SK-BUSH-J-Extra C 8 0forpa
Discount 20 or more ofExtra
anylength
line item $ 5.00
requested ea
by ALR
B57G44G145 $ 54 2.240” 1.759” 5.71” J.Deere T121987,T126201,T105930 Z 4 0for pa
Discount 30 or more of any line item $ 6.00 ea
B60-44-51 $ 52 2.376” 1.756” 2.00” . 51 kg TESK 2006 C 96 40 pa $13
B64-44-51 $ 58 2.502” 1.756” 2.00” . 64 kg TESK 2005 C 12 4 pa $13
B64-44-63 $ 63 2.502” 1.758” 2.50” TESK 2003 Minimum $150
C 24 5 pa $15 Popey
B64G44G63 $ 68 2.502” 1.758” 2.50” . 77 kg TESK 2005 C 21 2 pabefore
applies $16 GST & Freight
B64G44G76 $ 78 2.502” 1.756” 3.00” TESK D 27 0 pa $17
Tools and Accessories
may be
Quantity usedAvailable
Discounts to make upupon
Only
Minimum Wholesale
request provided Ordersinvoices
all outstanding of $150
are settled
Prices subject within 7without
to change Days notice
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Discount for 10 or more of any line item $3
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au Discount for 20 or more of any line item $5
Page 10 November 2013
applies before GST & Freight Page 10 November 2013 Discount for 30 or more of any line item $6
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 45mm DIAMETER SHAFT
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES
Stock 31-10-2013 JN30816, JN30919, JN31001
EX GST 10.2mm Usage Drill Bit HSS
Jobber
Cost $ 7,922
B50G45G45 $ 43 50.07mm 45.10mm 45.0mm . 13 kg T E S K 2 0 1 3 Titanium Nitride
D 26 2 pa $11 Coated
B50-45X45 $ 48 50.05mm 45.10mm 45.0mm . 13 kg T E S K 2 0 1 3 135
C 22degrees
2 pa split
$14point JN31001 QMRC 5542
B50-45-56 $ 42 50.07mm 45.10mm 56.0mm . 17 kg T E S K 2 0 0 9 A 73$13.00
54 pa $13 ea plus GST
B50-45-57 $ 45 49.83mm 45.09mm 57.0mm .17 kg T140211 ,T69352 C 16 TL-9LM102
Code: 3 pa $12 P Dimarco, lots of 4

B55G45G25 $ 35 55.05mm 45.15mm 25.0mm TESK 2012 C 19 2 pa $10 Kabota 161 Bkt Cyl Ram end
B55-45-30 $ 32 55.05mm 45.15mm 30.0mm . 19 kg TESK 2004 A 612Pack
+50 30 pa $10
B55-45-35 $ 34 55.05mm 45.15mm 35.0mm TESK 2004 C 47 Drills
Jobber 4 pa $10$ 58.00404
/ 6326 000=B55G45-34
B55G45G35 $ 35 55.05mm 45.16mm 35.0mm . 20 kg TESK 2004 A 43 18
Code: pa $10
TL6-9LM102 19000-46502 = B55G45G45
B55-45-36 $ 34 55.07mm 45.15mm 36.0mm . 23 kg SK045-BUSH-HL C 29 8 pa $10
B55G45G39 $ 37 55.07mm 45.15mm 38.8mm . 23 kg VIO 50-BUSH-HL C 45 10 pa $10
B55-45-40 $ 35 55.11mm 45.28mm 40.0mm . 25 kg John Deere - T76639 A 40
Use+40For40 pa $10
B55G45G40 $ 41 55.05mm 45.13mm 40.0mm . 24 kg VIO 50-BUSH-G AM12
105x 1.75
29 pa $11 19000-10302
B55-45-41 $ 35 55.10mm 45.15mm 40.0mm . 25 kg TESK 2004 A 90 36 paTap $10 311811-11210=B55-45G41
B55F45-42 $ 30 55.03mm 45.15mm 42.0mm Massey - 3501770 M2 Z 60 0 pa M8028
B55G45G44 $ 39 55.05mm 45.18mm 44.0mm . 26 kg TESK 45.11-45.20 D 19 0 pa
B55-45G45 $ 38 55.06mm 45.13mm 44.8mm . 27 kg PC45-1-D,E - KY045-H A 27 30 pa $11 01743-10405, 352811-11180, 01009-01010
B55-45X45 $ 60 55.05mm 45.13mm 44.8mm KX045-BUSH-HL BF8 A 64 27 pa $14 20T-70-25740
B55G45G45 $ 45 55.07mm 45.13mm 44.8mm .26 kg Komatsu - 07144-10405 A 72 28 pa $12 PC40-7 SK045-G,HR
B55G45X45 $ 58 55.05mm 45.13mm 44.8mm .26 kg Komatsu - 20T-70-71870 A 25 10 pa $14 PC40-7
B55-45X46 $ 62 55.05mm 45.13mm 45.0mm . 27 kg 20T-70-71880 O/BF8 A 34 16 pa $13 PC40-7

B55G45G50 $ 50 55.05mm 45.13mm 50.0mm . 30 kg VIO 50-BUSH-HR A 42 38 pa $12 550811-11150 331831-13130

B55G45X50 $ 60 55.05mm 45.13mm 50.0mm . 30 kg KX045-BUSH-R BF8 B 30 14 pa $16
B55-45X51 $ 61 55.06mm 45.13mm 51.0mm PC45-BUSH-F OF8 C 12 18 pa $16 20T-70-71250
B55-45G55 $ 43 55.05mm 45.13mm 55.0mm Furukawa - 337811-11130 C 21 7 pa $11 57mm long
B55G45G55 $ 49 55.06mm 45.15mm 55.0mm . 33 kg TESK 05 C 5+30 13 pa $12
B55-45G59 $ 45 55.05mm 45.12mm 59.0mm . 36 kg 550831-23130, 610511-51130 C 10 4 pa $10
B55-45-60 $ 47 55.07mm 45.15mm 60.0mm .37 kg KX161-BUSH-J B 61 4 pa $10
B55G45G60 $ 54 55.05mm 45.13mm 60.0mm .39 kg TESK 05 A 19+40 30 pa $12
B55-45X60 $ 62 55.10mm 45.16mm 60.0mm .35 kg VIO 50-BUSH-I O/BF8 B 25 37 pa $16
B55G45G61 $ 38 55.07mm 45.26mm 61.0mm JOHN DEERE - H148881 D 6 2 pa (to discontinue)
B55F45X65 $149 55.07mm 45.18mm 65.0mm VIO 50-BUSH-J F99.7 C 8 4 pa $19 N10.5 R55x5.5
B55G45G66 $ 55 55.05mm 45.19mm 66.0mm .39 kg R81850 R84376 C 14 10 pa $13
B56-45-40 $ 47 56.05mm 45.13mm 40.0mm . 27 kg O.S. TESK 08 C 8+18 8 pa $10
B56-45-50 $ 52 56.05mm 45.13mm 50.0mm . 34 kg O.S. TESK 08 D 4 - 2High
TAP pa $10
Speed Steel $31.00
B56G45G50 $ 54 56.05mm 45.13mm 50.0mm . 33 kg O.S. TESK 10 D 24 0 pa 10 This year
B58-45-34 $ 45 58.10mm 45.29mm 34.0mm CAT BEARING A12mm
22 7x pa
1.75$10
Intermediate 9R0411
PlusCEGST$9.74
B58-45-40 $ 45 58.10mm 45.29mm 39.9mm CAT BEARING C 3 TL-CMCHI120
Code: 0 pa $11Check Dia! 9R0147 CE $10.92
B60G45G40 $ 46 60.10mm 45.14mm 40.0mm . 37 kg TESK 2013 C 24 4 pa $12
B60G45G50 $ 50 60.07mm 45.13mm 50.0mm . 47 kg TESK 2013 C 24 4 pa $14
6 Pack
B60G45G60 $ 64 60.07mm 45.13mm 60.0mm . 57 kg TESK 2002 A 28 20 pa $16
B61-45-37 $ 48 61.03mm 45.17mm 37.0mm O.S.TESK 2006 DTAPS
23 -0HSS
pa $ 140.00 / 6 E.C.H
B62-45-42 $ 50 62.10mm 45.15mm 42.0mm . 47 kg Hitachi - EX122, EX60UR C10mm
42 0x pa
1.75$13
Intermediate
B62G45G55 $ 54 62.05mm 45.15mm 55.0mm . 60 kg O.S.TESK 2006 C 24 3 pa
B65G45G65 $ 78 65.10mm 45.14mm 65.0mm . 87 kg O.S.TESK 2012 CCode: TL6-CMCHI120
15 10 pa $17 Titan, BMI
B68G45G55 $ 98 68.08mm 45.15mm 55.0mm . 87 kg 912873 4400 - 3x4Dia Holes A 93 42 pa $18 Svik$240, 5wExtIntGr

TO SUIT 1.875” DIAMETER SHAFT DISCOUNT FOR QUANTITY

B57-48-19 $ 37 2.252” 1.878” 19.1mm CASE - D31512 D 22 0 pa BUSHINGS
Quantity Discounts Available only upon
Code request provided all outstanding invoices
are settled within 7 Days
TL-EDC150 $56 Electronic Digital Caliper 150mm Sterling Discount for 10 or more of any line item $ 3.00 ea
Discount for 20 or more of any line item $ 5.00 ea
Discount for 30 or more of any line item $ 6.00 ea

Minimum $150
applies before GST & Freight
Six Pack Quantity Discounts
Tools Available Only upon
and Accessories
Code: TL6-EDC150 $ 248 for 6 Plus GST request
may be usedoutstanding
provided all to make up invoices
Minimum are settled within 7 Days of $150
Wholesale Orders
Discount for 10 ortomore
Prices subject changeof anywithout notice
line item $3
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au
Discount for 20 or more of any line item $5
Page 11
applies before GST & Freight Page 11 November 2013 Discount for 30November
or more of any2013
line item $6
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 50mm DIAMETER SHAFT
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES Stock at 31-10-2013 JN30722, JN30919
EX GST Usage
Cost $ 16,726
B55G50G50 $ 65 55.05mm 50.17mm 50.0mm .16 kg 2 0 0 9 T E S K B 49 6 pa $12
B55G50G60 $ 68 55.05mm 50.17mm 60.0mm .20 kg 2 0 1 3 T E S K D 0 pa $13
B60-50-19 $ 27 60.02mm 50.24mm 18.5mm D129272 D 11 0 pa 580K ORIG=60.00 x 50.26
B60-50-26 $ 33 60.03mm 50.18mm 25.6mm .17 kg 580SK-BUSH-H,I C 17 13 pa $8 D140029 = 60.00 x 50.22
B60-49-27 $ 42 60.00mm 49.99mm 27.4mm 580K G110117 TRUNION Z 14 0 pa INT.CFR.3x45° ONE END.
B60-50-27 $ 33 60.00mm 50.26mm 26.5mm E176226 C 1 12 pa $9 580K
B60-50-28 $ 24 60.12mm 50.09mm 27.0mm T154277 $ REDUCED $ C 47 6 pa $7
B60-50-30 $ 35 60.00mm 50.23mm 30.0mm .20 kg D127542 - 580K LOADER C 28 44 pa $9 Was 50.26Ø
B60-50-31 $ 30 59.86mm 49.93mm 31.0mm .20 kg R85884 D 14 0 pa FITS TRUNION
B60-50-33 $ 33 60.00mm 50.25mm 33.0mm .22 kg D150608 - 580 SLE CENTRE
D 10 0DRILLpa $ 15.00580 eaSLE = 60-50-33
B60-50-34 $ 40 60.03mm 50.12mm 34.0mm .23 kg TESK 2003 C
146 12 pa $10 plus GST
B60-50-36 $ 33 59.99mm 50.20mm 36.0mm D137345 - 580K LOADER Z 25
No. 0 pa
5 7/16” Dia
B60-50X36 $ 44 60.10mm 50.15mm 36.0mm SK060-BUSH-HL BF8 High Speed
D 8 2 pa $11Steel
B60-50-38 $ 41 60.11mm 50.13mm 38.0mm .26 kg 33948/001, TESK A 192 +98 130 pa $10
Code MATBRO
B60-50G38 $ 38 60.10mm 50.15mm 38.0mm .26 kg KY045-BUSH-H C 25 6 pa $9
TL-9CD5-716
B60-50-40 $ 42 60.01mm 50.18mm 40.0mm .27 kg D141555 580SK-BUSH-C,D,E B 36 46 pa $11 RhinoBkts - Orig=60.00mm
B60G50G40 $ 45 60.07mm 50.17mm 39.8mm WA420-BUSH-S A 222 30 pa $11 RJ Rail 707-76-50240

B60G50G44 $ 37 60.08mm 50.23mm 44.4mm 075 225 321 C 11 3DRILLS

CENTRE pa $11
B60-50-45 $ 44 60.01mm 50.23mm 45.0mm .30 kg E176478 CASE A634Pack:
+80 86 pa $11
No. 5 $ 86.00 / 580K
6 & MATBRO 37452/004
B60G50G45 $ 45 60.10mm 50.15mm 45.0mm .29 kg TESK 2005 C 23 18 pa $12 075 225 321=60.08x50.23x44.4
B60G50X45 $ 52 60.10mm 50.15mm 45.0mm .29 kg TESK 2011 BF8 Code
C 24 6 pa $16
B60-50-46 $ 42 60.05mm 50.11mm 46.0mm .31 kg TESK 2005 TL6-9CD5-716
C 27 4 pa $13
B60-49-50 $ 38 60.12mm 49.71mm 49.5mm .35 kg T127644 John Deere 315 D 4 3 pa $9 VI050-BUSH-D,E=B60g50g50
B60-50-50 $ 47 60.11mm 50.15mm 50.0mm .34 kg TESK 2004 A 106 88 pa $13 MATBRO 504217 50.28Ø
B60-50X50 $ 60 60.07mm 50.12mm 49.7mm .33 kg PC45-C,PC60-7-G BF8 A 54 8 pa $16 707-76-50040 550901-12230
B60G50G50 $ 51 60.05mm 50.13mm 50.0mm .33 kg SK045-D,E PC60-K A 59+99 98 pa $13 201-70-64270,075 228 921 PG83
B60G50X50 $ 60 60.10mm 50.13mm 50.0mm PC45-1-BUSH-B BF8 A 105 74 pa $16 707-76-50471 & OLD 37452/001

B60-50X51 $ 60 60.05mm 50.14mm 50.1mm PC45-BUSH-F 0F8 D 25 2 pa $12 SK045-A,F 20T-70-71250, 352811-11140
B60-50X52 $ 60 60.10mm 50.15mm 50.0mm .35 kg SK060-BUSH-I O/B F8 C 23 8 pa $17 K5 CENTRE INT.GR
B60-50-51 $ 46 60.13mm 50.1 mm 51.0mm Matbro - 502585 D 10 1 pa $12 075 215 921=B60-50x50 PG 58
B60G50G53 $ 45 60.00mm 50.27mm 52.4mm 180427A1 - CASE D 16 0 pa ORIG.=59.98
B60-50-54 $ 44 60.05mm 50.18mm 54.1mm 580SK-BUSH-D,HDL D 62 1 pa $9 D138047 60.00 x 50.21

B60G50G54 $ 43 60.05mm 50.13mm 54.0mm 352831-11130 D 12 4 pa $10 To Discontinue

B60-50-55 $ 47 60.10mm 50.15mm 55.0mm KX161-BUSH-F C 28 2 pa $14
B60G50G55 $ 48 60.06mm 50.15mm 54.9mm 352831-11130 C 30 0 pa USE FOR Furukawa
B60-50-56 $ 42 60.13mm 50.13mm 56.0mm 33948/005 D 10 2 pa $10 MATBRO PAGE 48
B60G49G56 $ 28 60.07mm 49.73mm 56.0mm $ REDUCED $ D8 0 pa $8 R97724 375g

B60G50G59 $ 50 60.05mm 50.13mm 59.3mm .39 kg 20797408 A 226+250 460 pa $14 S’vik = 59.0 long $75
B60G50G60 $ 50 60.05mm 50.13mm 60.0mm .39 kg SK045-BUSH-C A 264 240 pa $15 IHI - 975 228 423
B60G50X60 $ 64 60.05mm 50.16mm 60.0mm .38 kg V1050-BUSH-B,C BF8 B 9+30 18 pa $18 ^=60.08x50.20x59.4
B60G50G61 $ 39 60.10mm 50.22mm 61.0mm .39 kg R82074 C 37 4 pa $9 37452/010
B60G50G64 $ 45 60.11mm 50.12mm 63.0mm Matbro - 34964 D 16 9 pa $10 341611-15120 = B60-50G64

B60G50X65 $ 70 60.07mm 50.18mm 64.8mm PC45-BUSH-A C 17+30 19 pa $18 20T-70-71140

B60-50-70 $ 48 60.13mm 50.13mm 70.0mm 503971 MATBRO DISCOUNT
C 22 20 pa $16FOR QUANTITY
B60G50G70 $ 53 60.13mm 50.13mm 70.0mm . 23 kg TESK 50.11-50.19 C 24 8 paBUSHINGS
$17
B60G50X70 $ 68 60.14mm 50.16mm 70.0mm .46 kg 37452/012 CQuantity
39 6Discounts
pa $18 Available only upon
B60G50X74 $ 66 60.07mm 50.12mm 74.3mm SK060-BUSH-HR BF8 D 14 provided
request 0 pa $21all outstanding invoices
are settled within 7 Days
B60-50X75 $ 70 60.11mm 50.18mm 74.6mm .49 kg VI0 50-BUSH-A,F O/BF8 CDiscount
6+30 19 pa or$21
for 10 more of any line item 3CFR EXT AT OPEN
$ 3.00 ea
B60G50X75 $ 70 60.13mm 50.09mm 75.0mm 37452/011 C 8 9 pa $21
B60G50X75+ $ 70 60.12mm 50.19mm 75.0mm + Extra Clearance Discount for
D 20 0 pa 20 or more of any line item $ 5.00 ea
B60-50G98 $ 56 60.08mm 50.39mm 98.0mm T106092 John Deere Discount for
Z 1 0 pa 30 or more of any line item $ 8.00 ea
B60G50G98 $ 76 60.10mm 50.30mm 98.0mm .66 kg T76309 A 34 16 pa $22
B61G50X50 $ 72 61.12mm 50.20mm 50.0mm NEW 37452/001 C 14 12 pa $15
B61G50G60 $ 56 61.05mm 50.13mm 60.0mm .44 kg TESK D 28 2 pa $13
B62-50-50
B63-50-24
$
$
64
46
62.10mm
63.07mm
50.16mm
50.07mm
50.0mm
23.5mm . 21 kg
TESK
TESK 2003
Minimum $150
C 26 4 pa $10
D 18 4 pa $9
B63G50G50 $ 53 63.05mm 50.12mm 50.0mm . 45 kg TESK 2001 C applies
20 12 pabefore
$13 GST & Freight
B63-50X52 $ 60 63.05mm 50.07mm 52.0mm .46 kg TESK 2006 C 19 Tools
8 pa and
$11 Accessories
. Quantity
may be Discounts
used to Available
makeOnlyup upon
request provided all outstanding
Minimum Wholesale Orders of invoices
$150
are settled within 7 Days
Prices subject to change without notice
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Discount for 10 or more of any line item $3
Minimum $150
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au
Discount for 20 or more of any line item $5
Page 12 November 2013
applies before GST & Freight Page 12 November 2013 Discount for 30 or more of any line item $6
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 50mm DIAMETER SHAFT (Continued)
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES Stock 29-10-2013 JN30920, JN30922,JN31021
EX GST Usage
Cost $ 3,727
B63G50G75 $ 52 63.05mm 50.12mm 75.0mm .70 kg TESK 2001 C 33 26 pa $19
B65-50G35 $ 40 65.07mm 50.15mm 35.0mm .37 kg W14B-BUSH-J CARBIDE
A 22+74 64 pa BURR $LOADER
$11 CASE 48.00 P/No.ea
L112479
B65G50G45 $ 60 65.11mm 50.14mm 45.0mm .45 kg TESK 2011 C 9.5
2+40Dia
20 Oval
pa $13 plus GST
B65G50X47 $ 58 65.10mm 50.15mm 47.0mm . 46 kg SK060-BUSH-K D 58 2 pa $15 BF8, 9mm WIDE EXT
B65-50G48 $ 56 65.06mm 50.15mm 48.0mm . 49 kg PC75UU-BUSH-I C6mm
12 Dia
6 paShank
$12 201-70-22141
B65-50X48 $ 66 65.05mm 50.15mm 47.8mm . 50 kg PC60UU-BUSH-I OF8 D 38 1 pa $14 201-70-72210 PC60-7
Code: TL-SE-3MDC
B65-50-55 $ 60 65.13mm 50.11mm 55.0mm . 59 kg 502550 MATBRO C 40 25 pa $15
B65F50X56 $148 65.10mm 50.18mm 56.0mm SK060-BUSH-J D 17 1 pa $35 F95 page135 O/No 6187
B65-50-60 $ 62 65.07mm 50.11mm 60.0mm WA 07 C 7 8 pa
B65G50G60 $ 64 65.11mm 50.15mm 60.0mm .62 kg TESK 2004 CShown
20 9 pa $18SIZE
FULL 502551=B65G50-59 PG48
B65G50G65 $ 72 65.11mm 50.15mm 65.0mm .62 kg TESK 2012 D 22 0 pa
B65-50-65 $ 56 65.13mm 50.11mm 65.0mm 501701 MATBRO C 20 6 pa $16

B65G50G70 $ 67 65.13mm 50.11mm 70.0mm .72 kg 501707 MATBRO C 12+24 30 pa $19

B65F50X73 $130 65.04mm 50.21mm 73.0mm .88 kg PC60&75UU-BUSH-J D 20 4 pa $30 20X-70-22140 F86x6F76x9R65x8pg83
B65G50G75 $ 65 65.08mm 50.13mm 75.0mm .78 kg TESK, 502582 C 6 3 pa $17
B65G50X84 $ 78 65.08mm 50.13mm 84.0mm .80 kg SK060-BUSH-G D 2+20 12 pa $16
B65G50G95 $ 70 65.13mm 50.11mm 95.0mm 501712, 502994 D 7 2 pa

B67-50R24 $ 24 2.625” 50.20mm 24.0mm G108689 580K Z 18 0 pa RECESS 59.9Ø X 4.5mm

B67-50R30 $ 38 2.625” 50.20mm 30.0mm 580SK-BUSH-H,R Z 12 0 pa G108525 1 REC 60x4.5 580SLE
B67-50-40 $ 40 2.625” 50.20mm 40.0mm .48 kg 580SK-BUSH-D,C D4 2 pa $9
B67-50R46 $ 40 2.625” 50.20mm 46.0mm 580SK-BUSH-D,E,G Z 15 0 pa G108417 1 REC 60x4.5 580SLE
6 Pack;
B70-50-26 $ 45 70.01mm 50.18mm 25.6 mm .37 kg 580SK-BUSH-IA CCarbide
26 4 paBurrs
$11 $ 248.00 D141249
/ 6 580SLE
B70-50R30 $ 43 70.00mm 50.20mm 30.0 mm D135075 580K Z 22 0 pa 1 REC 60X4.5
B70-50-34 $ 43 70.00mm 50.20mm 34.0 mm 580SK-BUSH-EX Z6mm
14 Dia Shank
0 pa D141389 580SLE
B70-50-36 $ 47 70.00mm 50.20mm 36.0 mm D136574 580K DTL6-SE-3MDC
26 0 pa
B70-50R38 $ 34 70.00mm 50.26mm 38.0 mm D127196 580K Z
12 0 pa 1 REC 60X4.5

B70-50R40 $ 42 70.00mm 50.26mm 40.0 mm E176155 580K Z 22 0 pa 1 REC 60X4

B70G50G50 $ 66 70.05mm 50.15mm 50.0 mm TESK 50.11-50.19 C 10 11 pa $19
B70-50-54 $ 62 70.01mm 50.19mm 54.0 mm .81 kg 580SK-BUSH-D,E,G C 27 4 pa $18 D137217 580SLE
B70-50G60 $ 56 70.05mm 50.15mm 60.0 mm .89 kg TESK 2007 D 34 0 pa Sold 40 in 2010
B70G50G60 $ 58 70.05mm 50.15mm 60.0 mm TESK 2011 D 27 0 pa
B70-50-78 $ 66 70.00mm 50.20mm 78.3 mm 580SK-BUSH-C C7 3 pa $18 D145080 580SLE

TO SUIT 2” DIAMETER SHAFT

B57G51G32 $ 43 2.252” 2.003” 1.25” .13 kg TESK 2006 C 47 2 pa $10
B57-51-45 $ 41 2.252” 2.007” 1.75” .19 kg 862691M1 A 20 46 pa $12 M8043
B57G51G45 $ 42 2.252” 2.004” 1.75” .18 kg T E S K 2 0 1 1 C+40 14 pa JN30922
B57-51-50 $ 45 2.252” 2.005” 2.00” .21 kg T E S K 2 0 1 1 B 37 20 pa $13
B57G51G57 $ 52 2.252” 2.003” 2.25” .24 kg T E S K 2 0 0 0 C 42DISCOUNT
14 pa $14 FOR QUANTITY
B57G51G64 $ 60 2.252” 2.004” 2.50” .26 kg T E S K 2 0 1 1 C 18 10 pa
USE ENBUSHINGS
65 x 50 not EN 60 x 50!
B60-51-22 $ 34 2.377” 2.007” 0.88” .14 kg CASE 1155D D Quantity
60 0 pa Discounts Available only upon
B60-51-32 $ 35 2.377” 2.007” 1.25” .20 kg T E S K 2 0 0 0 Crequest
32 12 provided
pa all outstanding invoices
B60-51-38 $ 36 2.377” 2.007” 1.50” .24 kg T E S K 2 0 0 0 B 13+50 28 are
pa settled
$12 within 7 Days
B60G51G38 $ 39 2.377” 2.007” 1.50” .23 kg T E S K 2 0 1 1 D 16 0 pa
B60-51-44 $ 38 2.377” 2.006” 1.74” T E S K 2 0 1 0 CDiscount pa6 $13
21 10 for or more of any line item $ 3.00 ea
Discount for 10 or more of any line item $ 5.00 ea
B60G51G44 $ 41 2.377” 2.006” 1.75” .27 kg TESK 2011 DDiscount
20 0forpa
20 or more of any line item $ 8.00 ea
B60-51-50 $ 48 2.377” 2.006” 2.00” .31 kg TESK 2004 A 59 10 pa $13 CAT 953
B60G51G50 $ 46 2.377” 2.006” 2.00” .32 kg TESK 2010 C 44 2 pa $14
B60G51G51 $ 21 2.365” 1.997” 2.00” T41953 - JOHN DEERE D 37 0 pa

B60-51-51 $ 20 2.365” 2.009” 2.01” R98953 - 770B 772B D 8 0 pa

B60G51G60
B60G51G64
$
$
50
53
2.378”
2.378”
2.006”
2.006”
2.37”
2.50”
CAT GRADER
CAT GRADER Minimum $150
C 6+40 20 pa $14
C 22 2 pa $14
B60G51G69 $ 49 2.380” 2.009” 2.74” 4:6:23.5 2G-8738 D 18 applies
0 pa before GST 12W &ExtFreight
6Int 2.5x450 Int O.E
B60G51G86 $ 65 2.380” 2.009” 3.37” 2:6:32 2G-7106 C 8 0Tools
pa $15 and Accessories
12W Ext 6Int 2.5x450 Int O.E
Quantity
may be used to make upupon
Discounts Available Only
request
Minimumprovided all outstanding
Wholesale Ordersinvoices
of $150
are settled
Prices subject to within
change 7 Days
without notice
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Phone 02 4932 3530 Fax: 02 4932

3100 Email: sales@kset.com.au
Discount for 10 or more of any line item $3
Discount 1320November
Page for line item $5
or more of any2013
applies before GST & Freight Page 13 November 2013 Discount for 30 or more of any line item $6
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 2” DIAMETER SHAFT ( continued )
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES Stock at 29-10-2013 JN31021, 22, 23, JN31114
EX GST Usage
DEBURRINGCost TOOL $ 9.00 $ea 8,314
B64-51-19 $ 36 2.501” 2.009” 0.74” . 17 kg D33659 1155D C 29 2 pa $7 Blade plus GST
Non-Replaceable
B64-51-22 $ 38 2.501” 2.009” 0.88” . 20 kg D33678 CASE C 33 9 pa $7
B64-51-25 $ 40 2.502” 2.004” 0.98” . 22 kg A2U130-194385 A 111+200 TL-DT-1-2
Code: 200 pa $8 AndersonDrg:63.55x50.85x25
B64-51-26 $ 38 2.502” 2.007” 1.00” . 23 kg T E S K 2 0 0 3
A 55 19 pa $8 Coalroc: B64F51-26 isA2U130-194392
B64F51-26 $ 54 2.501” 2.004” 1.00” . 25 kg A2U130-194392? A 100 34 pa $11 F71.5x4.25 Y63.4x3 Orig 32 HRC
B64-51-28 $ 34 2.500” 2.007” 1.12” . 25 kg 135249A1 D 26 0 pa CASE 590

B64-51-29 $ 34 2.501” 2.009” 1.13” D38943 1155D D 38 0 pa

B64-51-32 $ 38 2.501” 2.010” 1.25” .29 kg D30756 2.008-11 C6 5Pack;
+34 18 pa $$8
44.00 /JN31114
6 CASE $32 ’03
B64F51-32 $ 48 2.502” 2.003” 1.26” . 25 kg A2U220-194400 F71.5x4.19 Deburring
C 8 10 Tool
pa $11 2.816”x0.16”) 4140 no H.T
B64G51G33 $ 32 2.505” 2.009” 1.30” 2G8635 C 4 8 pa $10 2G8635 1.304”Long CE 12.55
B64G51G34 $ 36 2.505” 2.009” 1.32” TESK C 19 TL6-DT-1-2
Code: 2 pa $10
B64-51-35 $ 34 2.501” 2.009” 1.38” . 33 kg D43946 WAS B63-51-35 B 52 10 pa $11
B63F51-35 $ 26 2.493” 2.006” 1.38” FLANGE BUSH T58218 Z 24 0 pa F=70X5
B64-51G36 $ 45 2.503” 2.002” 1.42” . 34 kg TESK 2011 C 63 3 pa $11 DMS -Steer Cyl-Piston End G10w
B63G51G36 $ 19 2.493” 2.006” 1.40” 7 ONLY to CLEAR U40671 Z 7 0 pa
B63-51-37 $ 42 2.490” 2.000” 1.50” . 34 kg U43635 C 19 4 pa $8
B64-51-37 $ 42 2.500” 2.006” 1.50” 135248A1 C 16 6 pa $8 580 SUPER L
B64-51-38 $ 40 2.501” 2.009” 1.50” . 34 kg D31142 A 25+50 56 pa $12
B64G51G38
B64-51-39
$
$
46
41
2.502”
2.502”
2.007”
2.006”
1.50”
1.50”
. 32 kg
. 34 kg
TESK
TESK 2007
Sterling
C 23 2 pa $12
B 58 24 pa $12
B63G51G39 $ 30 2.490” 1.997” 1.54” . 33 kg T82886 - 670B 672B Z 8 FULL
Shown 0 pa
SIZE
B64-51-40 $ 30 2.502” 2.007” 1.59” . 36 kg 6K4076 - CAT 966 Bkt C 32 36 pa $13 CE $10.35,MFR 12.30
B63-51-41 $ 42 2.490” 1.997” 1.59” . 38 kg T42509 Z 4 0 pa
B64G51G42 $ 38 2.502” 2.007” 1.63” . 36 kg TESK 2000 C 22 10 pa $13
B64-51G43 $ 39 2.503” 2.002” 1.69” . 36 kg TESK 2011 C 62 0 pa DMS Steer Cyl-Rod End, G10w
B64G51G44 $ 48 2.504” 2.008” 1.75” . 38 kg TESK 2013 C 28 6 pa $13
B64-51-45 $ 46 2.503” 2.006” 1.75” . 40 kg WAS B63-51-45 B 36 31 pa $14 3J3185 CE Don’t do it
B64-51G48 $ 36 2.503” 2.007” 1.88” . 36 kg CAT 950-BUSH-TOP-L C 18 8 pa $11 7K0084 CE$10.23
B63-51-51 $ 40 2.490” 2.010” 2.00” T25877 D 3 0 pa 10 in 1 lot 2011
B64-51-52 $ 51 2.502” 2.007” 2.00” . 46 kg TESK 2001 B 87 28 pa $14
B63-51G51 $ 28 2.490” 2.000” 2.01” . 46 kg T34423 C 15 0 pa
B64G51G51 $ 52 2.502” 2.007” 2.00” . 44 kg D33032 A 8+66 43 pa $15 JN31114
B63G51G56 $ 28 2.490” 2.006” 2.19” T33933 Z 6 0 pa
B64-51-54 $ 46 2.501” 2.009” 2.13” CASE 1155D C 10 5 pa $13 SUIT PIN R48922
B64-51G59 $ 36 2.504” 2.007” 2.34” . 36 kg CAT 950-BUSH-Lever C 10 0 pa 7K0087 CE$13.51
B64-51-60 $ 48 2.502” 2.006” 2.37” . 54 kg TESK 2009 B 21 10 pa $16
B64G51G60 $ 49 2.503” 2.007” 2.37” CAT 955L BKT B 39 15 pa $16 7K9549 Mfr $18 CE $25
B64G51G63 $ 53 2.502” 2.007” 2.50” . 55 kg TESK 2000 A 110 16 pa $16
B64-51G63 $ 36 2.502” 2.006” 2.48” WAS B63-51G63 C 7 5 pa $15 2K4509 CE $12.63 MFR $17.50
B64G51G70 $ 56 2.502” 2.008” 2.75” . 61 kg TESK 2003 C 33 22 pa $18
B64G51G76 $ 70 2.502” 2.010” 3.00” . 66 kg TESK 2006 C 23 9 pa $16
B64G51G79 $ 58 2.503” 2.009” 3.11” T 4x6 Dia CAT 936 BKT/LINK C 22 7 pa $19 4V2873 suits 4V3619 CE $19.91
DISCOUNT FOR QUANTITY
B64F51G87 $ 99 2.500” 2.006” 3.44” Flange Bush F76.2x4.75 D 7+21 10 pa JN31022 40 Sold to Pacific Mchy
BUSHINGS
B64G51G89 $ 82 2.501” 2.004” 3.50” TESK 2007 D 32 2 pa $18 Was B63G51G89
B64G51G101 $ 98 2.504” 2.008” 4.00” . 89 kg WAS B63G51G101 DQuantity
34 2Discounts
pa $20 Available only uponStanden
M00097,
B65G51X54 $ 70 65.08mm 2.005” 2.12” . 53 kg INTERNAL FIG.8 GROOVE C 33 provided
request 6 pa $22all outstanding invoices
B65G51X76 $ 82 65.08mm 2.005” 3.00” . 74 kg INTERNAL FIG.8 GROOVE C 25 6 pa $24
B65-51X100 $109 65.09mm 2.010” 3.94” .99 kg CHECK INTERNAL DIA A 59 30 arepasettled
$29 within 7 Days
Mick Murray =2.011”
Discount for 6 or more of any line item $ 3.00 ea
B70-51-39 $ 45 2.753” 2.009” 1.50” . 55 kg TESK 2008 C 10 16
Discount paor$13
for 10 more of any line item $ 5.00 ea
B70-51-41 $ 45 2.752” 2.013” 1.61” . 57 kg D50698 2.009” D 20 2 pa
B70-51-45 $ 50 2.753” 2.010” 1.75” D9R BLADE Discount for 20
C 35 12 pa $14 or more of any line item $ 8.00 ea
B70G51G51 $ 54 2.752” 2.006” 2.00” . 70 kg TESK 2001 C 50 15 pa $16 JN30716 - Was B70g51g52

B70-51-60 $ 58 2.751” 2.010” 2.36” . 85 kg D91241 C 11+30 16 pa $18 JN31023

B70-51-61 $ 58 2.752” 2.010” 2.37” . 86 kg D9R BLADE D 10 0 pa
B70-51-63 $ 55 2.752” 2.010” 2.50” . 90 kg TESK 2.008-12 D 9 1 pa $18
B70G51G76 $ 80 2.752” 2.010” 3.00” 1 . 03 kg TESK 2.008-12 C 12 6 pa $19
B76-51-39 $ 55 3.002” 2.006” 1.50” . 76 kg O.S. TESK
Minimum $150
Capplies
5 6 pa $14 GST & Freight
before
B76-51-60 $ 77 3.002” 2.006” 2.37” 1 . 20 kg O.S. TESK C 7 7 pa $16
B89R51G48 $ 60 3.500” 2.023” 1.88” With Seal Recesses 6 ONLY Z 6 Tools
0 paand AccessoriesT113331 PG.47
may be
Quantity used to
Discounts makeOnly
Available up upon
Minimum Wholesale
request provided Orders of
all outstanding $150
invoices
are settled
Prices subject within without
to change 7 Days notice
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Discount for 10 or more of any line item $3
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au Page 20 or more of any
Discount14forNovember line item $5
2013
applies before GST & Freight Page 14 November 2013 Discount for 30 or more of any line item $6
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 55mm DIAMETER SHAFT
PART No. PRICE
OUTSIDE INSIDE LENGTH MANUFACTURE NOTES Stocktake 30-10-10 JN31030
Usage
EX GST
Cost $ 3,491
B65-55-26 $ 46 65.10mm 55.15mm 26.0mm . 20 kg Case Back hoe D 24 0 pa $8
DEBURRING TOOL $ 18.00 ea
Peter Gardner
B65-55-35 $ 48 65.10mm 55.15mm 35.0mm . 26 kg MF B 42 18 pa $9 M8072
B65G55G40 $ 55 65.06mm 55.07mm 40.0mm . 29 kg 4 x 3mm Holes Comfort Grip
A 72 24 pa $12 plus GST
Maspro4mmWgrooves
B65-55-44 $ 46 65.10mm 55.14mm 44.4mm . 33 kg TESK 2009 Takes
B 23 C10
12 pa- C35
$12 blades
B65-55X45 $ 64 65.10mm 55.15mm 45.0mm KX045-BUSH-F O/BF8 Code:
C 6 TL-ET-2
12 pa $17
B65-55-50 $ 54 65.10mm 55.17mm 50.0mm . 36 kg TESK 2004 C 38 4 pa
B65G55G50 $ 56 65.10mm 55.17mm 50.0mm . 35 kg TESK 2007 C 29 13 pa $15
B65G55G51 $ 46 65.10mm 55.15mm 51.0mm John Deere - R97726 D 12 0 pa
B65-55-55 $ 60 65.10mm 55.10mm 55.0mm . 39 kg John Deere - T67855 6CPack;
16 2 pa$ $14
86.00 / 6
B65G55G65 $ 70 65.07mm 55.20mm 65.0mm . 46 kg John Deere - R82076 C 13 4 pa $17
B65-55X65 $ 59 65.10mm 55.13mm 65.0mm 1 ONLY TO CLEAR Deburring Tools
D 1 0 pa
Code: TL6-ET-2
B65G55X65 $ 88 65.10mm 55.13mm 65.0mm SK045-BUSH-B C 13 8 pa $23 KX045-BUSH-A:B65-55X65
B65G55G67 $ 47 65.07mm 55.12mm 67.0mm John Deere - H144296 D 16 0 pa
B65G55G75 $ 83 65.07mm 55.12mm 75.0mm . 55 kg John Deere - R84378 C 15 2 pa $20
B65G55G76 $ 78 65.07mm 55.20mm 76.0mm John Deere - R82077 D7 2 pa $19
B65G55G82 $ 78 65.07mm 55.30mm 82.0mm John Deere - R82075 D 10 0 pa
Shown FULL SIZE
B68-55G45 $ 74 68.08mm 55.13mm 44.8mm . 43 kg WA470-BUSH-S-Cyl D 28 0 pa $14 707-76-55520 cyl end
B68G55G45 $ 74 68.08mm 55.07mm 44.8mm . 43 kg WA470-BUSH-S-Rod C 23 2 pa $15 707-76-55120 rod end
B68G55G50 $ 74 68.05mm 55.08mm 50.0mm . 47 kg PC16 MR-2 Car Body D 27 0 pa $16
B68-55X55 $ 76 68.05mm 55.10mm 54.8mm . 52 kg PC60-7-BUSH-D BF8 D6 0 pa 707-76-55180 + Cntr groove
B68G55G55 $ 62 68.05mm 55.07mm 55.0mm 2x5Ø C 13 3 pa $12 Mistake O/No. 7878

B70-55-26
B70-55-36
$
$
40
42
70.12mm
70.12mm
55.20mm
55.20mm
25.4mm . 30 kg
36.0mm
TESK 2013
TESK 2007
Sterling
C 36 0 pa $10
C 13 8 pa $10
Peter Gardner 6 at a time

B70G55G55 $ 74 70.05mm 55.10mm 55.0mm . 61 kg TESK

C 17 6 pa $15 B70G55X49 = 404 326
B70G55G70 $ 84 70.05mm 55.18mm 70.0mm . 80 kg YANMAR C 7 10 pa $16 B70F55X47 = 404 333

B70G54G98 $ 48 70.13mm 54.76mm 98.0mm John Deere - T105677 Z 17 0 pa

B70-56X65 $102 70.10mm 56.4 mm 65.0mm . 67 kg D65E-8 “R” BF8 D3 2 pa 141-78-11311 RIPPER
B70-56X85 $110 70.10mm 56.4 mm 85.0mm . 89 kg D65E-8 “R” BF8 D9 0 pa 141-78-11321 RIPPER
B73-56G65 $ 86 73.10mm 56.4 mm 65.0mm O.S. D65E-8 “R” Z1 0 pa BOWQUIP

TO SUIT 2.25” DIAMETER SHAFT

B67-57-39 $ 69 2.629” 2.267” 1.54” MODIFIED IJ2192 C 20 0 pa TEFOL MODIFIED IJ2192
B67-57-50 $ 60 2.630” 2.267” 1.97” . 39 kg MODIFIED IJ2192 C 16+36 36 pa $15
B67-57-55 $ 76 2.630” 2.267” 2.16” D11 LIFT CYL C 49 0 pa MDS Modify
B67-57-76 $ 70 2.630” 2.267” 3.00” . 58 kg D11 NOSE CONE A 12+36 44 pa $20 1J2192 $136 A/MARKET
Use EN 70 x 57:
B70-57-24 $ 27 2.743” 2.260” 0.95” John Deere - U17170 Z 10 0 pa TO DISCONTINUE
B70-57-26 $ 44 2.754” 2.256” 1.00” TESK 2003 C 22 10 pa $9
B70-57-28 $ 42 2.751” 2.260” 1.13” D52579 1155D D 15 0 pa
B70-57-30 $ 46 2.756” 2.257” 1.18” D127167 580K C 13 6 pa $10
B70-57-32 $ 53 2.754” 2.257” 1.25” . 32 kg 913 3059243 B 40 4 pa $11 STEP 2.743”ø x 3mm
B70-57-38 $ 57 2.754” 2.256” 1.50” . 38 kg WAS B70-57-37 B 59 10 pa $12
B70-57-41 $ 63 2.754” 2.257” 1.63” . 41 kg 913 3059268 A 73DISCOUNT
12 pa $13 FOR QUANTITY
STEP 2.743”ø x 3mm
B70-57-48 $ 40 2.753” 2.260” 1.88” . 49 kg CAT950-BUSHD,E D 2 0 pa BUSHINGS 7J9699 CE$12.56
B70-57-49 $ 34 2.743” 2.260” 1.93” John Deere - T49220 Z 9 0 pa DISCONTINUE
B70-57-50 $ 60 2.752” 2.259” 1.97” . 49 kg CAT980G-PIN-S Quantity
C 8 4 paDiscounts
$16 Available only upon
8P0420
B70G57G51 $ 66 2.752” 2.256” 2.00” . 50 kg TESK 2005 B 36 8provided
request pa $15 all outstanding invoices
B70-57-54 $ 60 2.752” 2.259” 2.12” . 55 kg CAT 953 C 6 10 pa $15
are settled within 7 Days
B70-57-57 $ 74 2.754” 2.257” 2.25” . 57 kg Eimco - 913 3059276 ADiscount
121 6forpa6 or
$16more of any lineSTEP $ 5.00xea
item2.743”ø 3mm
B70G57G60 $ 76 2.753” 2.257” 2.37” . 58 kg TESK 2009 C 30 for
Discount 2 pa
10$17
or more of any line item $ 8.00 4V8643
ea
B70-57-63 $ 76 2.754” 2.256” 2.50” . 59 kg TESK 2013 C 30 0 pa $18 DmhSringhatsAusdrillRigs
B70-57G63 $ 50 2.752” 2.261” 2.50” . 59 kg CAT 988B STRG Discount 20 or more of any line item
D 4 for0 pa $ 10.00
CE $15.50 ea
9J5875
B70-57-70 $ 82 2.754” 2.256” 2.75” . 68 kg Eimco - 913 3059250 A 70 6 pa $19 Step2.743”ø x 3mm
B70G57G70 $ 82 2.753” 2.257” 2.75” . 68 kg TESK 2004 B 28 4 pa $19
B76-57-43 $ 52 3.001” 2.260” 1.70” Case - D90722
D 11 0 pa
B76-57-54 $ 52 3.002” 2.256” 2.12” . 87 kg CAT - 6K2702
C 14 6 pa $17
B76-57-70
B76-57R125
$
$
90
84
3.002”
2.999”
2.258”
2.250”
2.75” 1. 12 kg
4.9”
TESK 2007
C 8+30 16 pa $20
3 ONLY (Recessed ends)
Z 3 0 pa Minimum $150 JN31030
SCANFOREST
applies before GST & Freight
B79G57G70 $110 3.126” 2.257” 2.75” O.S.TESK 2005 D 16 0 pa
Tools and Accessories
may be
Quantity used to
Discounts makeOnly
Available up upon
Minimum Wholesale
request provided Orders ofinvoices
all outstanding $150
are settled
Prices subject within 7without
to change Days notice
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Discount for 10 or more of any line item $5
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au Discount for 20 or more of any line item $8
Page 15forNovember 2013
applies before GST & Freight Page 15 November 2013 Discount 30 or more of any line item $10
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 60mm DIAMETER SHAFT
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES.
Stocktake 30-10-13 JN30913, JN31011,
EX GST Usage
Cost $ 10,564
B65-60X55 $ 83 65.07mm 60.10mm 55.0mm TESK 2013 C 18 24
TAPE pa
MEASURE $ 7.00 ea QMRC
B68-60X65 $ 92 68.07mm 60.16mm 65.0mm UNDER CARRIAGE D 24 0E pa
Sterling plus GST Swadling Eng
B70G60G28 $ 60 70.14mm 60.17mm 28.0mm JOHN DEERE = T70723 C 16 4 pa
B70G60G30 $ 62 70.10mm 60.15mm 30.0mm . 22kg TESK 2009 3Bm35x 16
10 mm
pa $10
B70-60-35 $ 58 70.07mm 60.15mm 35.0mm TESK 2012 B 38 back
Rubber 6 pa Case
$11 Atlas Copco - Custom Eng
B70G60G35 $ 64 70.07mm 60.15mm 35.0mm . 25kg TESK 2002 B 9 24 pa $12
3 Rivet end Hook
B70-60-38 $ 65 70.07mm 60.15mm 38.0mm . 32 kg TESK 2006 B62 TL-389
Code: 48 pa $12 JN30921
B70G60G47 $ 68 70.07mm 60.13mm 47.0mm . 36 kg 341811-11320 C 43 22 pa $14
B70-60-50 $ 68 70.08mm 60.13mm 50.0mm TESK 2003 A 41 55 pa $14
B70G60G50 $ 70 70.07mm 60.15mm 50.0mm . 383kg TESK B
6 1Pack
+40 24 pa $15
B70G60X50 $ 74 70.07mm 60.11mm 50.0mm . 38kg 341811-11310, 341811-11160 C 3+22 20 pa $18
Tape Measures $ 30.00 / 6
B70G60G60 $ 78 70.07mm 60.18mm 60.0mm . 47kg 36267 MATBRO ACode:
28+34 TL6-389
28 pa $17 pg48
B70G60X60 $ 84 70.10mm 60.13mm 60.0mm . 46kg 503621 MATBRO C 10 6 pa $20 pg 60
B70F60-60 $140 70.05mm 60.20mm 60.0mm . 53kg FBL-10-BUSH-Stg F80x7 C 18 4 pa $26 502298Y69.7x2 305973 4501120690G
B70G60X65 $100 70.06mm 60.13mm 64.9mm . 50kg SK045-BUSH-TD,SL B 50 6 pa $22 CHECK I.D. Before selling
B70G60G70 $ 94 70.07mm 60.13mm 70.0mm TESK 60.10-60.17 C 16 8 pa $20
B70G60X75 $104 70.10mm 60.13mm 75.0mm 37452/013 A 43 24 pa $24 MATBRO 503965
B70G60X80 $104 70.10mm 60.13mm 80.0mm SK220-HR C 27 3 pa $26 37452/003 PAGE 60
B70G60G85 $ 86 70.05mm 60.12mm 85.0mm . 70 kg B5X 60.09-60.14 C 18 6 pa $20 BOOM CYL.BOTH ENDS
B70G60X90 $108 70.10mm 60.13mm 90.0mm . 69 kg 37452/002 D 10 0 pa PAGE 60
B70G60X100 $124 70.10mm 60.13mm 100.0mm . 78 kg 37452/008 C 10 5 pa $29 PAGE 60

B71-60X59 $140 70.44mm 60.07mm 59.1mm . 48 kg A2U936-194295 OF8 D 6 0 pa $23 S’vik$200IntHelix30ptch

B71-60X50 $140 71.44mm 60.01mm 50.2mm . 45 kg A2U936-194288 OF8 C 10 2 pa $21 S’vik$322intHelica30 pitch Y71.2 x 5 50RC
B72-60X35 $ 68 72.02mm 60.08mm 35.0mm . 33 kg K5X15 O OF8 x 2 C 26 10 pa $19 Ainsworth,lots 16
B72-60X36 $ 38 72.02mm 60.26mm 35.0mm $ REDUCED $ Z 34 0 pa NOT FOR AINSWORTH
B72G60G50 $ 72 72.05mm 60.15mm 50.0mm . 50 kg 68311-4113-0 C 14 8 pa $16 KX71
B72G60G60 $ 75 72.05mm 60.15mm 60.0mm 68311-4112-0 D 26 0 pa KX71 & 341831-11130

B73G60X43 $ 85 73.13mm 60.15mm 43.0mm . 97 kg KL 85 Z2 O/B Fig 8 C 16 2 pa $21

B73G60G50 $ 48 73.10mm 60.15mm 50.0mm TESK D 24 0 pa
B73G60X55 $ 69 73.13mm 60.15mm 55.0mm . 57 kg 80Z2-BUSH-L,K BF8 D 43 0 pa 07E1 191 L001
B73G60G89 $ 68 73.07mm 60.15mm 89.0mm 1 ONLY Z 1 0 pa
B73-60X93 $106 73.13mm 60.15mm 93.0mm KL 85 Z2 BF8 D 16 0 pa BKT

B75-60-30 $ 48 75.08mm 60.12mm 30.0mm PWN D 20 1 pa $11 PaliwaneStatic

B75-60-35 $ 60 75.08mm 60.12mm 34.8mm EX120-BUSH-G (2) D 13 3 pa $11 4365897 $91 75.18x60.27x34.75
B75G60G35 $ 56 75.05mm 60.15mm 35.0mm . 27kg TESK D 26 0 pa D6M TRACK FRAME CALM
B75G60G49 $ 76 75.05mm 60.05mm 49.8mm . 60 kg WA500-BUSH-S C 25 2 pa $14
B75G60G50 $ 78 75.05mm 60.15mm 50.0mm . 60 kg PC60,75UU-BUSH-HL A 87 22 pa $16 20X-70-24150 PC75UU-2
B75-60X50 $ 94 75.05mm 60.15mm 49.9mm . 60 kg PC60-BUSH-F OF8 C 16 10 pa 4xLinebore Eng

B75G60G55 $ 84 75.09mm 60.15mm 55.0mm SK220-BUSH-HL C 16 12 pa $18

B75-60-60 $ 84 75.05mm 60.12mm 60.0mm .74 kg TESK 2000 C 23 20 pa $17
B75-60X60 $ 86 75.05mm 60.15mm 59.6mm . 72 kg PC60-7-BUSH-C,E BF8 C 46 2 pa $20
B75G60G60 $ 90 75.05mm 60.17mm 60.0mm . 72 kg TESK 2001 C 41 18 pa $18
B75G60X60 $ 94 75.05mm 60.16mm 59.8mm BF8 PC60,75UU-BUSH-HR C 10 10 pa $23 07144-10606, 707-76-60080
B75G60G65 $ 84 75.05mm 60.12mm 65.0mm . 78 kg TESK 2001 DDISCOUNT
2 pa FOR QUANTITY
B75G60X65 $ 92 75.10mm 60.13mm 65.0mm . 77 kg TESK 2004 A 9+84 94 pa BUSHINGS
$23 JN31011
B75-60X69 $ 98 75.10mm 60.18mm 68.7mm .83 kg PC120-BUSH-I OF8 CQuantity
8+18 10 pa $23 Available
Discounts onlyOF8,5W
203-70-56150 uponINT. CNTR.
B75G60X70 $ 96 75.09mm 60.20mm 70.0mm .84 kg SK035 SW FRAME B 41 28 pa $25 Randalls - S000240031
B75G60X71 $103 75.11mm 60.18mm 70.0mm .84 kg SK220-BUSH-J,K OF8 request
D 10 2provided
pa $23all outstanding invoices
B75G60X75 $115 75.10mm 60.13mm 75.0mm .90 kg TESK 2011 C 20 8are pasettled
$27 within 7 Days
B75G60X79 $121 75.10mm 60.15mm 79.0mm . 96 kg KLD 80 Z1 BF8 B 5 8forpa
Discount 6 or$27
more of any line item $ 5.00 ea
B75-60X80 $121 75.08mm 60.18mm 80.0mm . 96 kg SK220-BUSH-I OF8 CDiscount
5+16 for 10 or$26
8 pa item $ 8.00 ea
more of any lineBuyB75F60X87UKW
B75G60G85 $ 98 75.05mm 60.11mm 85.0mm 1. 03 kg TESK 2000 C 20 12
Discount paor$19
for 20 more of any line item $4xLinebore
10.00 ea Eng
B75F60X87 $175 75.15mm 60.20mm 86.8mm 1 . 84 kg PC120-BUSH-J OF8 C +8 14 pa $89 203-70-42182 Pg81 UKW
B75G60X90 $124 75.11mm 60.15mm 89.8mm 1. 09 kg PC120-BUSH-K OF8 C 22 9 pa $31 203-70-56160 - pg81
B75G60X106 $126 75.13mm 60.16mm 105.9mm 1. 29 kg KLD 80 Z1 BF8 D 11 0 pa $38 ORIG = B75-60x106

B76G60G50 $ 86 76.25mm 60.15mm 50.0mm O.S. TESK 2006 C 23 0 pa $18 IMPERIAL OD 3.002”
B78-60G106 $118 78.10mm 60.18mm 106.0mm 1. 60 kg O.S. TESK C 16 3 pa $26
B79G60X62
B80G60G65
$102
$100
79.05mm
80.10mm
60.15mm
60.14mm
62.0mm . 96 kg
65.0mm 1. 08 kg
KL 85 Z2
O.S. TESK
BF8 Minimum $150
D 24 0 pa
B applies
48 8 pabefore
$20 GST & Freight
CROWD CYL

B80G60G80 $123 80.10mm 60.14mm 80.0mm 1. 33 kg O.S. TESK C 27 10 pa $28

B84G60N155 $170 84.0mm 60.18mm 155.0mm 1. 33 kg Hardened Inside Only D 8 Tools
0 pa
and Accessories Monfort Eng
B85G60G72 $112 85.05mm 60.15mm 71.8mm 1. 61 kg 9124 8810 00 C21may 0 pa
be$28 Sandvik$190
used to make up / Goldfields
Quantity
Minimum Discounts Available
Wholesale OrdersOnly upon
of $150
request provided all outstanding invoices
Prices subject to change without notice
are settled within 7 Days
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au
Discount for 10 or more of any line item $5
Page
applies before GST & Freight Page 16 November 2013 Discount16forNovember 2013
20 or more of any line item $8
Located in the Newcastle - Sydney Region - Australia Discount for 30 or more of any line item $11
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 2.50” DIAMETER SHAFT
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES Stocktake 28-10-2013
EX GST Usage
Cost $ 5,678
B70-63X76 $ 98 70.10mm 63.12mm 76.2mm .40 kg SUIT 63mm PIN Z 11TAPE MEASURE
0 pa $ 16.00 ea
CAT 299 USES 8off
B75g64G31 $ 43 75.06mm 64.03mm 31.0mm SUIT 64mm PIN Professional
Z 7 0 pa plus GST IBS
B75-63-32 $ 40 75.08mm 63.04mm 32.0mm SUIT 63mm PIN Z 25 m 0/16ft
pa x 19 mm
B75-63-49 $ 50 75.08mm 63.04mm 49.0mm SUIT 63mm PIN Z 4 0 pa
B72-64-80 $ 60 72.00mm 2.500” 80.00mm 4 ONLY Z 4Code: TL-TBC50191B75-64G60 in Z store to bore out
0 pa
B75-64-65 $ 80 75.07mm 2.506” 65.00mm TESK 2011 C 17 4 pa $18 RANDALLS

B76-64-22 $ 32 3.000” 2.514” 0.90” . 25 kg O.D. SPECIAL Z 306 Pack

0 pa Damiens’ mistake
B76-64-23 $ 47 3.004” 2.514” 0.90” . 25 kg G108310 580K C 29 4 pa $8
B76-64-26 $ 48 3.003” 2.508” 1.00” . 28 kg D33635 B 17Tape6 Measures
pa $8 $ 76.00 / 6
B76-64-31 $ 37 3.000” 2.506” 1.25” . 35 kg O.D. SPECIAL Z 20Code:
0 pa
TL6-TBC50191 Damiens’ mistake
B76-64-32 $ 51 3.004” 2.506” 1.25” . 35 kg TESK 2.504-8 D 17 1 pa $8
B76-64-38 $ 44 3.004” 2.506” 1.50” . 42 kg $ REDUCED $ CAT 920 C 125 10 pa $12 7J9745
B76-64-41 $ 50 3.006” 2.510” 1.61” JOHN DEERE = T54081 C 21 8 pa $8
B76-64G44 $ 30 3.004” 2.510” 1.75” CAT950 BKT/LINK C 52 9 pa $10 7J9344 CE $10
B76G64G44 $ 38 3.004” 2.510” 1.75” 8J5778 D 16 4 pa $9 12W EXT
B76G64G46 $ 57 3.001” 2.506” 1.80” CASE 1150 D 10 2 pa R26633=3.0005” $104+

B76-64-47 $ 57 3.004” 2.504” 1.86” A2U913-194031 B 23 21 pa $16 STEP 2.98”Øx5 17HRC

B76-64-50 $ 49 3.003” 2.506” 1.98” 7K9528 C 9 9 pa $15 CE $14.23
B76-64G50 $ 57 3.003” 2.506” 1.98” 2K4506 C 1 4 pa $11 CE $10.12
B76-64-51 $ 68 3.002” 2.506” 2.00” . 54 kg JOY 1069127-224 A 55 16 pa $17 K5,S=0.5,INT=1.8X45°,JOY 2.507” 40HRC
B76G64G51 $ 71 3.002” 2.506” 2.00” . 53 kg TESK 2x5Ø B 30 20 pa $17
B76-64G56 $ 60 3.002” 2.506” 2.22” 2K4442 ,7K9985 D 1 2 pa $18 CE $15.78 ‘09 Mfr $18.82
B76G64G56 $ 60 3.003” 2.506” 2.23” . 59 kg CAT988 BKT (TOP) B 22 12 pa $20 7K9529,7K0078 9WextCE$20
B76-64-57 $ 60 3.002” 2.506” 2.25” . 62 kg TESK B 13 14 pa $17
B76-64G57 $ 60 3.004” 2.510” 2.25” 7J9732 C 1 0 pa CE $20

B76G64G57 $ 50 3.004” 2.510” 2.25” . 60 kg TYPE I “V” Ident.Groove C 18 0 pa 7K0078 CE$17.08$7.20Mfr 9w groove
B76-64-60 $ 66 3.003” 2.506” 2.36” CAT955 Bkt/Link 5K7995 D 9 2 pa $21 CE$17.33
B76-64G65 $ 66 3.003” 2.510” 2.56” CAT 936 17P3454 D 1 0 pa CE $16.26 ‘09
B76G64G65 $ 80 3.002” 2.506” 2.56” . 69 kg STANDEN HSB 192 A 60 24 pa $22
B76G64G69 $ 60 3.004” 2.510” 2.74” CAT 980A BKT/LINK C 10 16 pa $23 J9731 CE$20.76

B76-64-70 $ 79 3.003” 2.509” 2.75” JOY 1069127-411 C 7 10 pa $20 58 HRC

B76G64G70 $ 56 3.002” 2.506” 2.75” $ REDUCED $ C 48 2 pa $20
B76G64G75 $ 75 3.003” 2.507” 2.97” CAT 977K B/LINK C 3 7 pa $25 6K3177 11W EXT. CE$24.64
B76-64G76 $ 64 3.000” 2.514” 3.00” . 79 kg R36156 1x12Ø HOLE Z 4 0 pa
B76G64G76 $ 88 3.002” 2.509” 3.00” . 78 kg TESK 2008 C 18 10 pa $24
B76G64G84 $ 88 3.006” 2.510” 3.31” TESK 10W EXT D 25 4 pa $19 T82143=T50063=2.513”
B76G63G84 $ 88 3.002” 2.506” 3.31” . 90 kg STANDEN HSB 193 D 28 4 pa $19
B76-64-89 $ 90 3.004” 2.507” 3.50” 00341 D 10 4 pa $27
B76G64G95 $ 80 3.003” 2.510” 3.75” T CAT-950,960,962-BUSH-J D 2 3 pa $28 5V1874 CE$31
B76G64G102 $124 3.002” 2.509” 4.00” 1. 09 kg TESK C 28 4 pa $30
T” Bush: NoIntGroove4x6mmholes
B76-64H108 $110 3.003” 2.504” 4.25” A2U913-194033 D 17 DISCOUNT
1 pa $38 FOR QUANTITYC38, D21x2 Svik$202
B76G64G109 $ 66 3.002” 2.511” 4.30” T CAT-966G,972GH-BUSH-J D 12 2 pa $24BUSHINGS 4V8675 CE$24
B76-64-116 $ 92 3.003” 2.504” 4.58” 1.30 kg A2U913-194073 C 25 8 pa $34 75.7X5Ømm Step(AllOfThis Series)S$116
B76-64H116 $ 94 3.003” 2.504” 4.58” A2U913-194035 D 24Quantity Discounts Available
1 pa $40 C70,only
D21x2upon Svik$110
B76-64H117 $102 3.003” 2.504” 4.58” 1.21 kg A2U913-194072 D 10request
2 paprovided
$44 all outstanding C75, D19x2invoices
Svik$116
B76-64H138 $102 3.003” 2.504” 5.43” 1.21 kg A2U913-194038 D 8 2 pa $46 C28.6, D21x2 Svik$121
are settled within 7 Days
B77G64G114 $136 3.037” 2.507” 4.50” 1.31 kg O.S. TESK 2004 D 16Discount
0 pafor$36
6 or more of any line item $ 5.00 ea
B79-64-51 $ 60 3.128” 2.507” 2.00” . 70 kg JOY 1069127-459 B 36 20 pa $18 K3x30° S 1x45°
B79G64G76 $102 3.111” 2.508” 3.00” 1.10 kg O.S. TESK C 9 3 pa $22or more of any line item $ 8.00 ea
Discount for 10
B80G64G50 $102 80.10mm 2.505” 1.97” 0.65 kg O.S. TESK 2011 Discount
D 27 for 20 or more of any line item $ 10.00 ea
0 pa
B82G64G63 $100 3.252” 2.504” 2.50” 1 . 06 kg TESK 2001 B 22 24 pa $24
B82G64G76 $108 3.252” 2.508” 3.00” 1.28 kg TESK 2.506-9 C 11 14 pa $26
B86-64N38 $ 77 3.370” 2.506” 1.50” Helical groove 2 ONLY Z 2
B89G64G76 $130 3.503” 2.507” 3.00” 1.82 kg TESK 2013 C 15 2 pa $34
B94-64N80 $120 3.711” 2.502” 3.15” Helical groove 1 ONLY Z 1
B106G64G98 $260 4.178” 2.505” 3.86” 4.35 kg TESK 2013 Minimum $150
D 4 0 pa Newells Sawmill
applies before GST & Freight
Tools and Accessories
may
Quantity be used
Discounts to make
Available upupon
Only
Minimum
request Wholesale
provided Ordersinvoices
all outstanding of $150
Prices subject
are settled within 7 Days notice
to change without
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au
Discount for 6 or more of any line item $5
Page for1710November
applies before GST & Freight Page 17 November 2013 Discount or more of any2013
line item $8
Located in the Newcastle - Sydney Region - Australia
Discount for 20 or more of any line item $10
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 65mm DIAMETER SHAFT
PART No. PRICE
OUTSIDE INSIDE LENGTH MANUFACTURE NOTES Stock 29-10-2013 JN30913, JN31112
EX GST Usage

B73-65G60 $ 46 73.13mm 65.15mm 60.3mm
Cost
TAPE MEASURE $ 26.00 ea$ 8,198
SPECIAL O.D. D 16 0 pa
B75G65G30 $ 59 75.09mm 65.28mm 30.0mm JOHN DEERE - T76637 C8 10
metre4xpa
27$12
mm Plus GST
B75G65G35 $ 60 75.10mm 65.16mm 35.0mm . 45 kg TESK DMagnetic
36 2 pa $13
Hook
B75-65X60 $ 76 75.05mm 65.15mm 60.0mm $ REDUCED $ BKingGrip
41 14 pa $21
0.46 kg
B75G65G60 $ 78 75.07mm 65.14mm 60.0mm TESK 2012 D 24 0 pa $19
B75G65G64 $ 82 75.05mm 65.13mm 64.0mm . 54 kg 343831-11130, 343811-11370 B 45 20
Code: pa $20
TL-KGM80271 Furukawa
B75G65X75 $103 75.10mm 65.15mm 75.0mm SK220-BUSH-J,K OF8 C 9 8 pa $20
B75G65G80 $ 98 75.05mm 65.15mm 80.0mm . 62 kg TESK C ! 7 pa $18
B76G65G50 $ 74 76.0 mm 65.08mm 50.0mm . 48 kg T126935,T100252 D 9 4 pa $12 John Deere
B79-65G65 $ 62 79.80mm 65.16mm 64.8mm $ REDUCED $ 6DPack
7 0 pa
Tape Measures $ 120.00 / 6
B80-65-35 $ 70 80.10mm 65.16mm 34.8mm EX120-BUSH-HR (2) C 14 4 pa $14 4365448 80.33x65.42x34.8 $118
B80-65X50 $110 80.11mm 65.16mm 49.8mm PC120-BUSH-HL OF8 Code: TL6-KGM80271
C 18 24 pa $20 203-70-56140 + Int.Cntr.pg81
B80G65X50 $110 80.12mm 65.16mm 50.0mm . 65 kg HITACHI EX 120 A 36 12 pa $21 Make OD 80.13 !
B80-65-50 $ 82 80.10mm 65.16mm 50.0mm EX120-BUSH-I,J,K A 60 57 pa $17 4344898S 80.35x65.40x49.8 $46
B80G65X58 $105 80.06mm 65.15mm 57.9mm . 75 kg PC120-BUSH-HR 2BF8 B 40 18 pa $21 707-76-65220 pg81
B80G65G64 $ 98 80.10mm 65.15mm 64.3mm EX120-BUSH-HL (2) C 31 8 pa $21 4344899, 4444914S Sintered: 80.34x65.41
B80-65G65 $ 86 80.04mm 65.22mm 64.8mm WA250-BUSH-L,K,J C 14 8 pa $20 417-70-11860 10W Int.

B80G65X65 $115 80.06mm 65.16mm 64.9mm PC120-BUSH-G BF8 B 17 16 pa $25 10W Ext
B80G65G75 $108 80.06mm 65.15mm 74.5mm 1.02 kg TESK 2007 B 45 12 pa $23 DontUseTimken85x65
B80G65G80 $116 80.07mm 65.15mm 80.0mm TESK 2012 D 14 2 pa $21 Use only Ovako 85x65
B80G65G84 $116 80.05mm 65.15mm 84.0mm 353831-11130 C 16 9 pa $26
B80G65G89 $118 80.05mm 65.10mm 88.5mm 1.17 kg 135-30-11251 C 24 8 pa $28 KOMATSU D53 FRAME BRACE
B80G65G100 $114 80.06mm 65.15mm 99.6mm TESK 2007 C 10 2 pa $31
B80-65X130 $140 80.06mm 65.15mm 129.8mm BF8 PC60-7-BUSH-B D9 0 pa 35W Int Cntr groove 707-76-65250

B83G65G100 $140 83.06mm 65.16mm 99.5mm 1.63 kg O.S. TESK 2007 C 20 4 pa $28
B85G65X65 $120 85.10mm 65.16mm 65.0mm 1.17 kg O.S. TESK 2009 BF8 C 22 14 pa $25
B90-65X90 $140 90.09mm 65.12mm 90.0mm 2.17 kg TESK 2013 BF8 D 12 0 pa $35
B76-67G191 $ 99 76.02mm 66.62mm 190.5mm 7 ONLY Z7 0 pa Mudgee Brgs bought twice, 6 off

TO SUIT 2.75” & 70mm DIAMETER SHAFT

B76-69-80 $ 90 76.05mm 69.16mm 80.0mm SLEEVE Z 4 0 pa
B86G69G36 $ 50 86.13mm 69.50mm 36.0mm SLEEVE Z 2 0 pa IBS
B80-70-25 $ 56 79.99mm 70.20mm 25.0mm CASE 580SK-BUSH-BC D 5 2 pa $12 D144421
B80-70-28 $ 42 79.78mm 69.90mm 28.0mm CASE 580SL TRUNNION C 1 8 pa $12 124568A2, 4X45° Int.One End
B80G70G50 $ 75 80.07mm 70.18mm 50.0mm .46 kg T E S K 2 0 0 3 C 29 6 pa $17
B80G70X50 $ 96 80.07mm 70.15mm 50.0mm .44 kg TESK A 80 54 pa $21
B80F70-52 $200 80.02mm 70.10mm 51.98 . 63 kg FOR QTY 10: $168 ea F100 B 2+54 48 pa $37 F99.99,N7.47

B80F70X52 $210 80.02mm 70.10mm 51.98 . 62 kg FOR QTY 10: $177 ea F100 A 6+46 60 pa $40 F99.99,N7.47
B80-70-60 $ 88 80.07mm 70.13mm 60.0mm . 56 kg 352811-11230 C 24 4 pa $19
B80G70X60 $ 80 80.10mm 70.12mm 59.7mm $ REDUCED $ C 5 4 pa $23
B80G70X65 $ 82 80.10mm 70.12mm 65.0mm $ REDUCED $ D 11DISCOUNT
2 pa $23 FOR QUANTITY
B80G70G75 $ 90 80.07mm 70.20mm 75.0mm . 66 kg TESK C 14 4 pa $24BUSHINGS
B80-70-79 $102 80.05mm 70.15mm 80.0mm . 74 kg TESK C 7 3 pa $24
Quantity Discounts Available only upon
B80-70-80 $112 80.12mm 70.12mm 80.0mm . 73 kg T67856, 504234 Crequest
25 2 provided
pa $24 all outstanding invoices
B80-70X80 $110 80.05mm 70.15mm 80.0mm . 72 kg 353811-11190 C 15 2 pa $24
B80-70-81 $104 80.14mm 70.23mm 80.0mm . 73 kg TESK 2003 C 2 2 pa are $24
settled within 7 Days
B80G70X85 $120 80.09mm 70.20mm 85.0mm . 75 kg TESK 2009 CDiscount
13 1for pa4$24
or more of any line item $ 6.00 ea
B80G70X90 $128 80.10mm 70.19mm 90.0mm . 80 kg TESK 2011 D 12 0 pa $24 Suit Kobelco SK135 Offset
B80-70G104 $136 80.07mm 70.20mm 104.0mm . 94 kg BM90C-BUSH-J,K,L Discount for
C 12 4 pa $26 10 or more of any line item $ 9.00 ea VOLVO
Discount for 20 or more of any line item $ 12.00 ea
B82-70-32 $ 52 3.253” 2.761” 1.28” CAT 633 STRG D9 2 pa $11 4T0370 CE $ 10.73
B82G69G36 $ 52 3.262” 2.736” 1.42” 4 ONLY TO CLEAR Z4 0 pa
B82-70-45 $ 68 3.253” 2.759” 1.75” . 52 kg CAT 920 8E6752 C 41 8 pa $12 8E6752 CE $ 12.34
B82G70-56 $ 66 3.253” 2.762” 2.20” T .62 kg CAT936-BKT/LINK D2 0 pa 4V2883
B82-70-57 $ 80 3.253” 2.756” 2.25” . 70 kg CAT983-BUSH-F C 13 8 pa $15 8K7618,7J9374
B82-70G57 $ 44 3.252” 2.758” 2.23” . 70 kg CAT950-BUSH-A D8 0 pa 7K0086 CE$11.45

B82-70-60 $ 56 3.252” 2.757” 2.37” BEARING, BLADE C 19 6 pa $14 3G9598 CE $13.69

B82G70G60 $ 80 3.252” 2.757” 2.37” . 67kg TESK D 20 2 pa $19
B82-70-70
B82G70G70
$ 96
$ 98
3.254”
3.252”
2.751”
2.759”
2.75”
2.75”
TESK
CAT953-BUSH-L,K Minimum $150
D 14 6 pa $19
D 21 0 pa
SK220-BUSH-I
CAT953 BKT Tilt Linkage
B82-70-74 $100 3.252” 2.756” 2.90” CAT983 applies
Z 16 before GST & Freight 7K8114
0 pa
B82G70G75 $102 3.252” 2.756” 2.95” CAT983 C 30 6 pa $20
Tools and Accessories
may be used to make up
Minimum Wholesale
Quantity Orders Only
Discounts Available of $150
upon
request
Prices provided
subject all outstanding
to change invoices
without notice
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Phone 02 4932 3530 Fax: 02 4932

3100 Email: sales@kset.com.au Discount
Page 18
are settled within 7 Days
for 4 or more of 2013
November any line item $6
applies before GST & Freight Page 18 November 2013 Discount for 10 or more of any line item $9
Located in the Newcastle - Sydney Region - Australia Discount for 20 or more of any line item $12
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 2.75” & 70mm DIAMETER SHAFT (Continued)
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES
SHORTEN BUSHES EASILY !
Stock 29-10-2013 JN30924, 30925, 30926
Ex GST Usage
Cost $ 46 each plus
Code: TL-RNGN $ 10,813
GST
B83-70X44 $ 86 83.13mm 70.14mm 44.0mm . 53kg KLD 80 Z1 B/OF8 C 12 12
RNRN 5 pa
04$14
00T01020 670
B83-70X55 $ 98 83.13mm 70.14mm 55.0mm . 66kg KLD 80 Z1 C 13 4$pa
B/OF8 TL6-RNGN 216$26
for 6
B83-70X71 $ 120 83.10mm 70.13mm 71.0mm KLD 95 Z D 10 1 pa $10 ORIG.PIN=69.86Ø B/O Fig 8
B85G70G44 $ 77 85.10mm 70.13mm 44.0mm .59kg TESK 2002 CSANDVIK
1+20 14 paCormorant
$10 - TurningRANDALLS
Insert -
B85G70X55 $ 98 85.11mm 70.18mm 55.0mm . 73kg 404 325 400 BF8 C 30- Ceramic Whisker Reinforced -
14 pa $24
B85G70X60 $ 104 85.10mm 70.12mm 59.7mm .82kg SK045-BUSH-T BF8 B 31 15 pa $24
B85G70G65 $ 94 85.07mm 70.24mm 64.8mm 707-76-70010 W120 C 11 6 pa $15
B85G70X66 $ 110 85.13mm 70.18mm 66.0mm . 66kg SK210-BUSH-I B 48 16 pa $28
B85G70X67 $ 110 85.15mm 70.30mm 66.8mm . 92kg PC200-BUSH-HL,R OF8 C 21 10 pa $25 205-70-73180 17wExtPg76
B85-70-70 $ 92 85.10mm 70.18mm 70.0mm 1.02kg TESK 2004 C 34 13 pa $22
B85-70X70 $ 113 85.05mm 70.20mm 69.7mm .97kg PC120-BUSH-D,E BF8 B 46 20 pa $29 707-76-70240 10wIntPg81
B85G70X70 $ 113 85.07mm 70.15mm 70.0mm PC120-BUSH-B,C 2x5Ø A 22+50 41 pa $29 707-76-70230 BF8 9ExtPg81
B85G70X75 $ 118 85.10mm 70.15mm 75.0mm 1. 03kg PC200-BUSH-HL AHard
41 Part Turning
22 pa $30
B85-70X77 $ 116 85.15mm 70.18mm 76.9mm 1. 08kg PC120-BUSH-F OF8 C 11 6 pa $29 203-70-56130

B85G70X78 $ 120 85.07mm 70.16mm 78.0mm PC200-6,7-BUSH-HR DCode:

18 TL-SNGN
6 pa $29 $ 40 each 707-76-70110
plus GST
B85-70G80 $ 94 85.17mm 70.20mm 80.0mm C AT 3 2 5 / 3 3 0 - B U S H C 2 0 pa 7Y3551 CE $55.81
B85G70X80 $ 120 85.10mm 70.19mm 80.0mm 1. 11kg TESK 2011 SNGN 12 07
C 14+30 14 pa $33 08T01020 670
Suit Kobelco SK135 Offset
B85G70X84 $ 123 85.13mm 70.30mm 84.8mm 203-70-41411 2xOF8 BTL6-SNGN
6+30 12 $pa196$33
for 6 21K-70-41411 Pg76
B85G70X85 $ 125 85.15mm 70.15mm 84.7mm 1. 18kg PC120-BUSH-A 2 BF8 A 39 44 pa $33 203-70-56121 12w Ext Groove
B85G70X86 $ 123 85.10mm 70.18mm 85.0mm 1. 19kg PC200-BUSH-B,G 2x5Ø BSANDVIK 1+30 17 paCormorant - Turning707-76-70320
$32 205-70-71360, Insert -
B85G70G86 $ 92 85.08mm 70.16mm 85.8mm TESK 2006 D 19- Ceramic
2 pa $22 707-76-70651 12W EXT
Whisker Reinforced -
B85G70X97 $ 150 85.05mm 70.15mm 97.0mm 1. 35kg KATO HD900 F8 A 62 60 pa $40 Eureka Eng
A silicon carbide aluminium oxide based
B86-70-25 $ 66 86.00mm 70.20mm 25.0mm .37 kg E176194 - Case 580K Dceramic
12 2 withpa excellent
$9 bulk toughness.
B86-70-28 $ 60 86.00mm 70.20mm 28.0mm . 40kg D135559 - Case 580K C 5 3 pa $9for Hard
Recommended Bottom580SK “TUI”,”TLL”
Part Turning
B86-70-30 $ 62 86.00mm 70.20mm 30.0mm . 42kg D135557 - Case 580K C 0 in 2unfavourable
pa $9 conditionsTOP 580SK “TUT”
B86-70-32 $ 60 86.00mm 70.20mm 32.0mm E176196 - Case 580K C 9 2 pa $9
B86-70-34 $ 64 86.01mm 70.20mm 34.0mm D135558 - Case 580SK C 5 3 pa $9 D151073 D138042
B86F70X55 $ 100 86.00mm 70.10mm 55.0mm Flange 150 Dia x 15 Z 2
B86G70X80 $ 110 86.01mm 70.18mm 80.0mm O.S. TESK 2004 C 12 8 pa $28
B89-70X56 $ 75 3.511” 70.18mm 55.6mm KLD 80 Z2 “J” B/OF8 Z 1
B89G70G70 $ 94 3.503” 2.756” 2.75” 1. 26kg TESK 2004 C 10 2 pa $27
B89G70G75 $ 96 89.10mm 70.15mm 75.0mm KL 85 Z2 D 12 0 pa $30
B89G70G82 $ 60 3.490” 2.750” 3.25” U46436 Z 4
B90-70-24 $ 48 90.00mm 70.22mm 24.0mm D135741 - Case 580K Z 11 0 pa 580SK “ATO”
B90F70-24 $ 56 90.00mm 70.22mm 24.0mm D135742 Case 580K F94 Z 14 0 pa F93.8x4.25 580SK “ATI”
B90-70-30 $ 52 90.00mm 70.21mm 30.0mm D151060 C 7 3 pa $10 ORIG=89.98
B90-70-32 $ 51 90.01mm 70.23mm 32.2mm 580SK-TOP-PIV DCode: 3 pa $10 $ 110 each plus
30 TL-N151.2 GST
D151069
B90-70R32 $ 48 90.00mm 70.20mm 32.0mm D135555 - Case 580K ZN151.2-600-50EP
16 0 pa 2 REC. 80x4.3
B90F70-33 $ 58 90.00mm 70.19mm 33.0mm 580SK-BUSH-AB Z 13 0 pa
TL6-TL-N151.2 $ 606 for 6D136569 BEFORE 0047600
B90-70-38 $ 50 90.01mm 70.19mm 37.8mm 580SK-LOW-PIV C 16 4 pa $16 D151070
SANDVIK Cormorant - Parting Insert -
B90F70-38 $ 56 90.00mm 70.19mm 38.0mm 580SK-BUSH-AB Z 15 0 pa D151071 F94x4
B90-70R38 $ 56 90.00mm 70.20mm 38.0mm D135556 - Case 580K Z -18
Cubic0 Boron
pa Nitride - Q-Cut CBN
2 REC. -
80x4.3
B90F70R38 $ 66 90.00mm 70.22mm 38.0mm D136569 - Case 580K Part
Z 7through Hard Bushes
0 pa F94x4 60 Rockwell C
2 REC.79.95x4.3
B90F70R39 $ 66 90.00mm 70.22mm 39.3mm 580SK-BUSH-B F94x4.1 D 2 2 pa $10 D135740 2 REC.79.94x4.3
B90-70R40 $ 56 90.00mm 70.33mm 40.0mm E176209 - Case 580K C 9 2 pa $10 2x REC 80x4 660g
B90-70-44 $ 66 90.00mm 70.20mm 44.0mm 580SK-BUSH-F C 6 2 pa $10 D1372181xB90-70M44
B90-70R50 $ 75 90.00mm 70.20mm 49.7mm . 82kg D136715 - Case 580K C 3 DISCOUNT
3 pa $10 FOR2x QUANTITY
REC. 79.9x4.1 Middle“SF”

B90-70-50 $ 74 90.01mm 70.19mm 49.7mm 580K C 4+20 8 pa BUSHINGS

$20
B90-70-63 $ 76 90.01mm 70.22mm 63.2mm CASE 590 - D151058 D 4+20 8
Quantitypa $12
Discounts
B90G70G80 $ 120 90.10mm 70.18mm 80.0mm TESK 2x5Ø HOLES B 37 18 pa $31 Available only upon
B90-70X80 $ 138 90.10mm 70.18mm 80.0mm HD700V2 BUSH I B/OF8 Z request
18 0provided
pa all outstanding invoices
B90-70X81 $ 138 90.10mm 70.18mm 80.0mm HD700V2 BUSH J BF8 Z 24 0are pa settled within 7 Days
B90-70X86 $ 140 90.10mm 70.18mm 86.0mm 1. 71kg HD700V2 BUSH K BF8 C 20 10 pa $39
B90G70X86 $ 140 90.10mm 70.18mm 86.0mm KATO 800V2,900 “J” 15 2forpa4 or$39
C Discount more of any line item
237-4200 $ 7.00
2000 900V2eaBF8
Discount for 10 or more of any line item $ 10.00 ea
B90-70X100 $ 142 90.12mm 70.23mm 100.0mm KATO 800V2,900 “K” C 12 4 pa $43
B92-70-51 $ 70 92.10mm 2.756” 50.8mm O.S. TESK 2005 CDiscount
17 for 20 or
8 pa $18more of any line item $ 14.00 ea
B93G70X86 $ 120 93.10mm 70.17mm 86.0mm O.S. TESK 2005 BF8 C 3 4 pa $28
B100G70R75 $ 146 100.06mm 70.12mm 75.0mm WA250-3A-BUSH-D,E Z 2 0 pa 2XRECESS 85ØX10
B108G70G70 $ 166 108.11mm 70.08mm 69.77mm 3 holes 5Dia ML2D - LiftCylRodEye C 6 2 pa $32 28 734600 S’vik $500

Minimum $150
applies before GST & Freight
Tools and Accessories
may be usedAvailable
Quantity Discounts to makeOnly
up upon
Minimum Wholesale
request provided Orders of
all outstanding $150
invoices
Prices subject
are settled within 7 Days notice
to change without
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Discount for 4 or more of any line item $7
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au Discount
Page 19 for 10
November line item $10
or more of any2013
applies before GST & Freight Page 19 November 2013 Discount for 20 or more of any line item $14
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 75mm DIAMETER SHAFT
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES Stocktake 30-10-2013 JN30926
EX GST Usage
Cost SQUARE
COMBINATION $4,749
B86-71X50 $120 86.14mm 71.20mm 50.0mm ZAXIS160-BUSH-I D 14 0 pa Zaxis 160 LC
B86G71G65 $ 98 86.12mm 71.20mm 65.0mm EX120-BUSH-F (2) $ 40.00
C 13 2 pa $23 3072715 86.35x71.43x64.8 ea$182
B86G71G70 $ 98 86.12mm 71.20mm 70.0mm ZX120-BUSH-F,J (2) Heavy Duty
C 11 0 pa $27- Metric Only plus GST444 3878
B86G71G84 $120 86.12mm 71.20mm 90.0mm ZAXIS160-BUSH-HR D 0 pa
Stainless Steel Rule
B86G71G90 $120 86.12mm 71.20mm 90.0mm ZAXIS160-BUSH-HL C 13 Iron
Cast 1 pa $28
Stock
B85-75-38 $ 60 85.05mm 75.20mm 37.9mm 1 x 6mm Ext Chamfer CHeavy Duty
2+20 10 - 0.55 kg
pa
B85F75-38 $ 68 85.12mm 75.20mm 37.9mm .41kg Volvo - VOE11082827 C 50 8 pa $14 F89N4,UndecutL150&L180 QH
B85G75G60 $ 84 85.05mm 75.15mm 60.0mm . 57kg TESK 2000 CCode:TL-COMBS53
4+26 12 pa $10 B85g75X60 for SK135
B85G75X90 $124 85.08mm 75.19mm 90.0mm . 86kg TESK 2011 C 6 2 pa $36 Kobelco SK135

B90G74G48 $ 50 90.12mm 74.85mm 48.2mm T154057 D 16 0 pa

B90-75-50 $ 80 90.05mm 75.20mm 50.0mm . 77kg $ REDUCED $ ACombination
121 24 pa $20Squares HARRYBILT BUCKET
B90-75X57 $114 90.11mm 75.40mm 57.1mm . 83kg Komatsu - 154-78-14224 C 30 3 pa $15 D85A-18 16 OFF RIPPERS
B90-75-60 $ 89 90.05mm 75.15mm 60.0mm TESK 2002 C 12 3 pa $9 / 6 B90-75X62=341811-11220
6 Pack $ 192.00
B90-75G64 $100 90.05mm 75.26mm 64.7mm . 97kg C 4 TL6-COMBS53
Komatsu - 154-63-42320 Code: 4 pa $10 D85A-18 2 OFF Ram/Dozer
B90G75G65 $109 90.05mm 75.18mm 64.7mm . 91kg Komatsu - 154-63-42420 B 30 4 pa $26 D85A-18 2 OFF Ram Eye

B90-75G65 $ 96 90.12mm 75.20mm 65.0mm Komatsu - 154-78-14223 D8 0 pa $10 ORIG.=B90-75G65

B90-75G66 $ 99 90.07mm 75.16mm 65.0mm WA320-BUSH-B,C C 12 2 pa $12 WA320-1 & WA320-3
B90G75G75 $112 90.05mm 75.15mm 75.0mm 1. 12kg D85A-18 C 20 3 pa $30 W120 385-1001-0591=B90-75G75
B90-75G80 $102 90.08mm 75.18mm 80.0mm 1. 21kg Komatsu - WA300 BKT C8 4 pa $20
B90G75G85 $117 90.06mm 75.18mm 85.0mm 1. 27kg WA300/320-BUSH-L,K B 15 11 pa $33 K$80 2006
B90-75G138 $170 90.12mm 75.25mm 138.0mm Komatsu - 385-1001-8432 C 10 2 pa $28 W120 :385-1001-0591=75.20Ø

B92G75G65 $ 80 92.07mm 75.28mm 65.0mm TESK 2001 D 17 0 pa

B95-75-50 $ 74 95.05mm 75.18mm 50.0mm 1.58kg TESK 2000 C9 4 pa $16
B95-75-55 $ 82 95.05mm 75.15mm 55.0mm Komatsu - D85A-18 D 13 0 pa RIPPER - 1120g
B95-75-75 $ 82 95.05mm 75.15mm 75.0mm Komatsu - D85A-18 D 19 0 pa $17 RIPPER
B95G75G100 $ 86 95.10mm 75.15mm 100.0mm $ REDUCED $ C 33 2 pa $20 GIRVAN - 2040g

B100G75G75 $ 90 100.11mm 75.15mm 75.0mm 2.80kg 3 ONLY D 3 2 pa $22

B100G75G100 $120 100.12mm 75.15mm 100.0mm 2.90kg TESK 2004 D 3 2 pa $29

TO SUIT 3” DIAMETER SHAFT

B89-77-33 $ 49 3.504” 3.014” 1.31” 3J6442 D7G RIPPER GROUP Z 0 pa 3J6442 MAKE 3.014”Ø
B89-76-39 $ 56 3.503” 3.004” 1.54” . 51kg A2U913-194036 B 62 10 pa $15 STEP 3.48”Øx3 ORIG=17HRC
B89-76T40 $ 60 3.493” 3.001” 1.56” T CAT950-BUSH-B D4 0 pa $21 7J9694 CE$21.02
B89-76-49 $ 68 3.503” 3.004” 1.93” A2U913 194037 C 21 1 pa $15
B89G76G51 $ 87 3.501” 3.006” 2.00” . 63kg 4x5Ø Holes B 17 16 pa $16
B89G76G53 $ 70 3.500” 3.006” 2.12” . 66kg TESK 2012 D 21 0 pa From T42843 B89g76g54
B89-76-57 $ 78 3.504” 3.006” 2.24” TESK 2003 C 16 16 pa $20
B89-77-57 $ 78 3.504” 3.022” 2.25” 3J6167 D9 0 pa D7G RIPPER GROUP
B89-76-63 $ 84 3.506” 3.012” 2.50” TESK 2005 C 15 4 pa $22
B89G76G63 $ 88 3.504” 3.006” 2.50” TESK 2007 B 21 32 pa $22 McCULLOCHs

B89G76G64 $ 60 3.506” 3.011” 2.50” 7J9346 D 22 0 pa OFM 4 x 6 Dia HolesCE$22

B89-76-70 $ 96 3.502” 3.004” 2.75” . 88kg TESK 2011 C 12DISCOUNT
2 pa $24 FOR QUANTITY
B89G76G73 $ 94 3.505” 3.005” 2.85” 8J6536-K D 11 0 pa BUSHINGSORIG BRONZE 4X3Ø
B89-76G75 $ 74 3.504” 3.008” 2.97” .95kg CAT 955 BKT/LINK C 14 16 pa $21 7K9573 CE $30.80
B89G76G76 $106 3.504” 3.006” 3.00” .95kg TESK 2001 BQuantity
20 12 paDiscounts
$22 Available only upon
B89F77-79 $ 90 3.485” 3.025” 3.10” JOHN DEERE T38642 request
Z 5 0 provided
pa all outstanding invoices
F=114x2.5
B89-76G81 $ 68 3.503” 3.009” 3.18” CAT 4V8674 - 966-BUSH-C C 1 2 pa settled
are $27 within 7 Days CE$27
B89-76G83 $104 3.504” 3.006” 3.25” 721-BUSH-J,L,K CDiscount
17 4forpa4 $20
or more of any line itemCASE LOADER
$ 6.00 ea
B89G76G86 $ 90 3.500” 3.006” 3.41” 1.10kg TESK 2012 Z 11 0 pa From T42844 B89g76g87
B89G76G89 $114 3.502” 3.005” 3.50” 1.12kg TESK 2x5Ø holes Discount for 10
C 14 14 pa $22 or more of any line item $ 9.00 ea
1 IN STOCK=3.003”
Discount for 20 or more of any line item $ 12.00 ea
B89G76G94 $ 82 3.503” 3.012” 3.70” T CAT980C,F,G-BUSH-L,K C 6 pa $22 1V9148 1.19kg
B89G76G102 $120 3.503” 3.006” 4.00” TESK 2x5Ø holes D 12 1 pa $24 4J6533
B89-76G107 $ 86 3.504” 3.008” 4.23” T CAT950-BUSH-F D2 0 pa 8K5757 CE$30.56
B89G76X108 $154 3.503” 3.005” 4.25” 1.35 kg Groove=86.6Ø 10Radius B 43 15 pa $40 Scanforest, CATBuncher
B89G76G133 $120 3.506” 3.014” 5.24” 1.68 kg CAT 966-BUSH-B D6 0 pa 9J7078 40mmWextGr

Minimum $150
applies before GST & Freight
Tools and Accessories
may beDiscounts
Quantity used toAvailable
make up Only upon
Minimum
requestWholesale Orders ofinvoices
provided all outstanding $150
are to
Prices subject settled
changewithin 7 Daysnotice
without
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Discount for 4 or more of any line item $7
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au Discount
Page 10 or more of 2013
20forNovember any line item $10
applies before GST & Freight Page 20 November 2013 Discount for 20 or more of any line item $14
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 3” DIAMETER SHAFT (Continued)
PART No. PRICE OUTSIDE INSIDE LENGTH
MANUFACTURE NOTES Stocktake at 28-10-2013
EX GST Usage
Cost $11,441
B90G76G76 $125 3.547” 3.006” 3.00” 1.05 kg EXTRA O.D. SIZE DSNIPS
22 2 pa $22 $ 34.00 ea
HI-TENSILE plus GST
B95-76-26 $ 50 3.753” 3.006” 1.00” MFD 07 DBlack
39 Panther
0 pa - 185 mm ZEMEK ENG .
B95-76-40 $ 58 3.751” 3.008” 1.60” CAT 28 RIPPER D 6 wire
Cuts 0 panetting, light guage
2 USED SCANDINAVIAN
B95-76-51 $ 58 3.752” 3.004” 2.00” CAT 28 RIPPER D 1 0 pa 4 USED SCANDINAVIAN
B95G76G60 $ 72 3.753” 3.006” 2.37” 3G5999-K Daluminium,
20 1 pa carpet,
$24 3G5999leather,
= 3.756” x3.013” x2.38”
B95G76G62 $ 58 3.740” 3.000” 2.45” 1.05 kg $ REDUCED $ Kevlar
Z 6 0O,pa
etc...

B95G76G63 $ 98 3.752” 3.006” 2.50” 1.20 kg TESK 3.005-8 2x5Ø DCode:

14 0TL-29-702
pa
B95G76G70 $110 3.753” 3.006” 2.75” TESK 2009 D 15 2 pa $31
B95G76G76 $112 3.752” 3.006” 3.00” 2. 05 kg TESK 2004 D
12 2 pa $22
B95G76G82 $112 3.752” 3.006” 3.25” TESK 2003 D610
Pack;0Snips,
pa HI-TENSILE
B95G76G89 $118 3.754” 3.006” 3.25” TESK 2009 C 1 Panther
Black 8 pa $25- 185 mm
RED GRIPS $ 178.00 / 6
B95G76G102 $125 3.752” 3.006” 4.00” 2.04 kg TESK 3.005-8 D 3 1 pa $28
B95G76G120 $ 78 3.740” 3.000” 4.71” 2.76 kg JOHN DEERE T66214 Z 9 2 pa $28 U43721
B95G76G121 $ 60 3.752” 3.006” 4.75” $ REDUCED $ CCode:TL6-29-702
32 6 pa $30

B98G76G102 $130 3.877” 3.006” 4.00” O.S.TESK 08 D 6 1 pa $43

B100-76X75 $200 100.05mm 3.008” 2.95” 1.89 kg A2U913-194150 A 35 8 pa $40 2 FIG.8 S’vik $407
B100T76X89 $190 100.05mm 3.009” 3.503”OAL A2U913-194148 C 2 5 pa $44 Taper Sides S’VIK$465 PG104
B100-76X144 $248 100.03mm 3.001” 5.68” A2U913-194265 D 0 pa Open helic grve 4mm x 30mm pitch

B102G76G76 $120 4.004” 3.006” 3.00” 2.08 kg A2U913-194265 D2 0 pa

B102G76G102 $140 4.004” 3.006” 4.00” 2.78 kg TESK 2009 C 11 3 pa $43
B102G76G150 $240 4.004” 3.006” 4.00” 2.78 kg TESK 2011 D 0 pa
B133T76R67 $298 5.255” 3.005” 2.636” 4.66 kg A2U913-194149 C6 6 pa $82 R100.23x5 Svik$609 PG104

TO SUIT 3.125” DIAMETER SHAFT

B92-79-64 $ 70 3.632” 3.139” 2.53” D10 Lift Arm Bush C 17 4 pa $20 3G8052 CE$19.84

TO SUIT 80mm DIAMETER SHAFT

B85-80X70 $ 96 85.07mm 80.15mm 70.0mm .35 kg TESK 2013 C 6 pa JN31011 - QMRC

B90F80-17 $ 44 90.00mm 80.19mm 17.0mm D144162 F94 N4 D 13 0 pa CASE $45 2006 89.99mm
B90-80-20 $ 44 90.00mm 80.20mm 20.0mm D144170 590 D 9 0 pa CASE $42 2006 89.99mm
B90-80-30 $ 48 90.01mm 80.18mm 29.6mm .32 kg 114318A1, 192559A1 C 9 6 pa $14 89.99mm CASE $33 2006
B90-80-50 $ 87 90.17mm 80.29mm 50.0mm EX350 4196105 B 31 19 pa $17
B90G80G60 $105 90.06mm 80.15mm 60.0mm .59 kg TESK 2002 A 108 66 pa $18

B90-80-65 $ 96 90.10mm 80.15mm 65.0mm .68 kg TESK 2004 C 31 22 pa $22

B90-80-80 $122 90.10mm 80.15mm 80.0mm 0.83 kg 38738 MATBRO C 23 4 pa $22
B90G80G90 $136 90.08mm 80.15mm 90.0mm 0.92 kg SK210-BUSH-HR C 20 3 pa $28
B90G80G100 $142 90.10mm 80.15mm 100.0mm 1.02 kg 504227 MATBRO C 47 20 pa $32
B90-80G140 $175 90.07mm 80.15mm 140.0mm 1.46 kg BML90C SMALL Z C 17DISCOUNT
10 pa $45 FOR QUANTITY
VOLVO SMALL Z LINK
BUSHINGS
B95-80-55 $ 99 95.05mm 80.15mm 55.0mm 0.88 kg 4107838 - HITACHI B 24 22 pa $21
B95-80-65 $114 95.05mm 80.15mm 65.0mm 1 . 04 kg HITACHI C Quantity
52 0 pa Discounts Available only upon
B95G80X67 $122 95.14mm 80.31mm* 67.0mm 1 . 05 kg 206-70-53150 OF8 B 38 38 pa $30 all outstanding
request provided 16mm EXT.invoices
OF8 PG69
B95G80X68 $128 95.12mm 80.20mm 67.0mm 1 . 06 kg TESK 2002 B 20 19 pa $30
are settled within 7 Days
Discount for 4 or more of any line item $ 7.00 ea
B95-80-70 $104 95.10mm 80.19mm 70.0mm 1.16 kg EX200-BUSH-J D 16 0 pa EX200-BUSH-J = 68 mm long
B95G80X70 $130 95.12mm 80.18mm 70.0mm 1 . 11 kg CAT 320C-BUSH-K B 59 36forpa10$31
Discount or more of12mm
any line
Ext,OF8 10.00
item $TOO ea
TIGHT?
B95G80G78 $ 98 95.10mm 80.28mm 78.0mm 1.23 kg TESK 2005 C 18 3forpa20$27
Discount or more of any line item $ 14.00 ea
B95G80X78 $101 95.08mm 80.33mm* 78.0mm 1.18 kg PC220-BUSH-HR C 46 12 pa $32 707-76-80020 2xBF8 80.46Ø PG68

B95G80X79 $112 95.12mm 80.20mm 78.0mm 1.25 kg TESK 2001 C 45 8 pa $32 Mosely tilt bkt
B95G80G80 $116 95.18mm 80.25mm 80.0mm 1. 24 kg CAT 320C-BUSH-HL,J A 21 20 pa $34 CE$62 2001
B95-80X80 $130 95.13mm 80.30mm* 80.0mm 1.31 kg 21K-70-12161 2xOF8 B 37 16 pa $32 80.40Ø PG68
B95G80X81 $140 95.12mm 80.20mm 81.0mm 1.30 kg TESK 2001 Minimum $150
A 51 40 pa $32
B95F80X80 - 95.13mm 80.15mm 80.0mm KOBELCO K909A F160x8 Z applies
0 pa before GST & Freight
DIP/BKT, 116x10 REC 90x5

Tools
Quantity and Accessories
Discounts Available Only upon
may be used to make up
request provided all outstanding invoices
Minimum Wholesale Orders of $150
are settled within 7 Days
Prices subject to change without notice
Discount for 4 or more of any line item $7
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au
Discount for 10 or more of any line item $10
Page 21 November 2013
applies before GST & Freight Page 21 November 2013 Discount for 20 or more of any line item $14
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 80mm DIAMETER SHAFT (Continued)
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES
Stock at 28-10-2013
EX GST Usage $ 24.00 ea
SNIPS
Industrial Cost plus GST $16,989
B95G80X85 $ 149 95.05mm 80.15mm 85.0mm 1.32 kg EX200 “B” SE210”K,H” B Black
59 48Panther
pa $35- 185 mm HITACHI EL200-BUSH-J
B95G80X86 $ 156 95.09mm 80.22mm 86.0mm 2BF8 13WExt PC220-BUSH-B,C,D,E,G A 77 76 pa $36 707-76-80020, 80010, 206-70-55280 pg68
Black Grips
B95G80X90 $ 159 95.14mm 80.33mm* 90.0mm 1.39 kg 205-70-67150 OF8 A 31 31 pa $36 Was 80.40Ø PG69
B95G80X91 $ 151 95.12mm 80.20mm 90.0mm SK220 “HL”, SK330-8 “I” C 33 7 pa $36 <For “I”: OF8, Ext ID groove
B95G80X95 $ 153 95.10mm 80.15mm 95.0mm 1. 50 kg HD700-BUSH-HR 17 2TL-29-701
C Code: pa $36 KTR Eng SK220-BUSH-HR
B95F80X95 $ 154 95.11mm 80.35mm* 95.0mm 2 kg PC220-BUSH-J F130x7 B 8 10 pa $65 205-70-72130 ,F2=113x15, H95x12, Pg68
B95-80X98 $ 162 95.15mm 80.14mm 98.5mm 1. 56 kg KLD 80 Z1 C 6 0 pa
6 Pack
B95G80G100 $ 148 95.09mm 80.16mm 100.0mm 1 . 67 kg TESK B 34 14 pa $43
B95-80X100 $ 164 95.10mm 80.18mm 100.0mm 1 . 67 kg SE210-BUSH-J OF8 D SNIPS, Industrial
11 0 pa SAMSUNG
B95G80X100 $ 179 95.13mm 80.16mm 100.0mm 1 . 67 kg HD700“HL”, CAT320C“HR” C Black
36 14Panther
pa $46 CAT320C “HR”
B95G80G104 $ 174 95.10mm 80.15mm 104.0mm 1 . 68 kg 325B-BUSH-J C Black
22 6Grips
pa $43
$ 114.00 / 6 087-5847
B95G80X110 $ 194 95.13mm 80.18mm 110.0mm 1 . 63 kg TESK 2009 B 18 4 pa $46 By common request B95g80X125
B95G80X125 $ 230 95.13mm 80.18mm 125.0mm 1 . 93 kg 205-70-71330 2x7Ø 2F8 C 17 12 pa $52 19W EXT PC200-3 BOOM
Code:TL6-29-701
B98G80X67 $ 150 98.13mm 80.20mm 67.0mm O.S. PC220-BUSH-HL D 9 1 pa $35 OF8
B98G80X78 $ 176 98.13mm 80.20mm 78.0mm 1. 50 kg O.S. PC220 BUSH-HR C 17 17 pa $39 BF8
B98G80X90 $ 196 98.13mm 80.20mm 90.0mm 1. 70 kg O.S. PC200/220 BUSH K D 14 0 pa OF8
B100-80-21 $ 104 100.00mm 79.97mm 20.7mm 0. 46 kg 1986794C1 - 580SLE D 26 2 pa 580SLE Trunnion 4mmX45° Int One End
B100F80-46 $ 56 100.00mm 80.21mm 46.0mm D151059 F104 D 4 1 pa N4.15 CASE $50
B100G80G50 $ 94 100.13mm 80.21mm 50.0mm 1. 06 kg TESK 2010 D 24 0 pa
B100-80-80 $ 124 100.13mm 80.22mm 80.0mm 1. 77 kg TESK B 23 4 pa $33
B100G80G80 $ 126 100.13mm 80.22mm 80.0mm 1. 81 kg TESK 2010 A 60 22 pa $32 JN30823
B100G80X90 $ 176 100.13mm 80.21mm 90.0mm Cobra ZL 50G WheelLoader C 9 3 pa $45 Chinese Wheel Loader
B100G80X95 $ 180 100.13mm 80.21mm 95.0mm TESK 2010 C 4 6 pa $47
B100G80X110 $ 196 100.13mm 80.20mm 110.0mm 2. 42 kg O.S.TESK 2BF8 B 13 5 pa $52
B100G80X139 $ 230 100.13mm 80.23mm 139.0mm SE210-LC-BUSH-J OF8 D 8 2 pa $60
B105G80X95 $ 194 105.13mm 80.17mm 95.0mm 2.69 kg TESK B 24 17 pa $53
B110F80X95 $ 185 110.06mm 80.32mm 95.0mm 3 . 30 kg PC220-7-BUSH-J B 25 9 pa $73 F130 x N7 R95ØX12
B110G80G100 $ 236 110.13mm 80.28mm 99.9mm 3 . 48 kg O.S.TESK C 4 4 pa $49
B110G80X110 $ 258 110.13mm 80.25mm 110.0mm 3 . 84 kg O.S.TESK BF8 C 21 10 pa $67

TO SUIT 3.25” DIAMETER SHAFT

B95-83-70 $ 96 3.752” 3.257” 2.75” 7S3863 CAT983 D 15 2 pa $27 B95G83G82=Case721-Bush-J
B95G83G73 $ 96 3.753” 3.257” 2.87” CASE LOADER D 23 2 pa $27
B95F83-78 $ 80 3.751” 3.255” 3.05” FLANGE 105mmx 5.7 D4 0 pa Tub Grinder
B95G83G83 $ 76 3.752” 3.262” 3.27” 1. 13 kg CAT 960F,962G-BUSH-L,K C 10 2 pa $32 3G8779 CE$38
B95G83G95 $ 84 3.753” 3.261” 3.74” 1. 29 kg 3G9191 D 16 0 pa
B95G83G102 $ 160 3.754” 3.257” 4.00” TESK D 32 0 pa $34
B99G83G108 $ 172 3.879” 3.257” 4.25” 1. 98 kg TESK 2010 C 10 10 pa Suits 966 TrackLoader

DISCOUNT FOR QUANTITY

TO SUIT 85mm DIAMETER SHAFT BUSHINGS
B95-85-75 $ 104 95.05mm 85.15mm 75.0mm TESK B 29 6 pa $27
B95G85G80 $ 110 95.08mm 85.15mm 80.0mm 0.93 kg TESK 2013 Quantity
D 15 0 paDiscounts
$31 Available only upon
B95-85-100 $ 120 95.05mm 85.15mm 100.0mm 1. 11 kg TESK request provided
C 7 7 pa $35 all outstanding invoices
B95G85X125 $ 220 95.10mm 85.25mm 125.0mm SOME WA420-BUSH-L,K C 16 7 paare$61
settled within 7 DaysEXT 19W 2F8
B100G85X48 $ 96 100.10mm 85.18mm 48.0mm KATO 900 “HL” BF8 DDiscount
6 2 forpa 4$15 line item $ 8.00
or more of any 097-4200-9000 eaV2
900SEV,
B100F85-50 $ 218 100.03mm 85.07mm 50.29 26433448 F125 x N7.47 ADiscount
22 22forpa10$52 Qty 20: $190
or more of any line item $11.00 ea
B100-85G80 $ 140 100.10mm 85.20mm 80.0mm 1. 35 kg WA320-BUSH-A C 7 3forpa20$29
Discount 419-70-11890
or more of any line item $ 14.00 ea
B100-85G85 $ 140 100.10mm 85.18mm 85.0mm 1. 43 kg 424-70-11810 D 18 0 pa WA420,450-J, 9W Int
B100G85G85 $ 148 100.10mm 85.20mm 85.0mm 1. 42 kg WA420-BUSH-L,K B 36 7 pa $34
B100N85G85 $ 160 100.12mm 85.22mm 84.8mm 1. 36 kg WA380/420-BUSH-J C 16 6 pa $34 423-70-21810 MudPg120
B100G85X98 $ 198 100.10mm 85.18mm 98.0mm 1. 63 kg KATO 900 “HDL” BF8 C 17 8 pa $48 097-4200-8000 900SEV,V2
B100G85G100 $ 168 100.07mm 85.12mm 100.0mm 1. 67 kg 2x5Ø B 10 pa $35
B100G85X105
B103G85G100
$ 170
$ 170
100.10mm
103.10mm
85.18mm
85.18mm
105.0mm
100.0mm
Kato800-Bush-J
O.S. TESK
OF8 Minimum $150
C 11 2 pa $38
D applies
5 3 pa $32
Kato800=B100-85X105
before GST & Freight
Tools and Accessories
Quantitybe
may used to
Discounts makeOnly
Available up upon
Minimum
request Wholesale Orders of
provided all outstanding $150
invoices
are settled
Prices subject withinwithout
to change 7 Days notice
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Discount for 4 or more of any line item $8
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au Discount
Page 10 or more of 2013
22forNovember any line item $11
applies before GST & Freight Page 22 November 2013 Discount for 20 or more of any line item $14
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 3.5” DIAMETER SHAFT
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES
Stocktake at 31-10-2013
EX GST Usage
Cost MULTITOOL $ 32.00 ea $3,308
B99-89N100 $140 3.921” 3.508” 3.94” 2 ONLY Z 2 0 pa
12 Function plus GST
B100-89-57 $ 50 3.954” 3.504” 1.69” 3 ONLY TO CLEAR Z 3 0 pa
Sheffield Stainless Steel$ 70 3.988”3.484”1.9”5J1193
B101-89-49
B102F89-43 $128 4.002” 3.506” 1.69” 0. 52 kg A2U913-194032 F120x5 DIncludes
23 0 Pouch
pa $20 Pg67

B102-89-44 $ 82 4.004” 3.521” 1.75” 0. 67 kg CAT - 4J2379 C 7 4 pa $14

B102-89-51 $ 97 4.002” 3.505” 2.00” 0. 77 kg TESK D 12 6 pa
B102-89G64 $103 4.006” 3.510” 2.50” CAT C 19 6 pa $28
B102-89G76 $106 4.002” 3.506” 2.97” 1.15kg CAT - 7K9576 Code:
C 4TL-3056
pa $25 CE$24.50
B102G89G76 $124 4.002” 3.506” 2.99” 1.15kg CAT - 7K9576 D 17 0 pa
B102-89-76 $ 84 4.003” 3.518” 3.01” 1.15 kg CAT - IJ5304 C656
Pack0 pa D11 BLADE x 16 CAT$161

B102-89G94 $110 4.002” 3.506” 3.70” 1.44 kg CAT - 5K7037 CMULTITOOLS

21 6 pa $30 $ 158.00 / 6 CE dont sell them
B102-89-95 $126 4.003” 3.507” 3.75” CAT983 - 7J7887 D1.77
25 kg
1 pa $30
B102G89G95 $120 4.005” 3.516” 3.75” CAT - 9J7099 D 8 0 pa
B102G89X101 $150 4.004” 3.505” 4.00” 1. 45 kg TESK 2010 CCode:
20 0TL6-3056
pa
B102G89X108 $164 4.004” 3.505” 4.25” 1. 55 kg SCAND. D 15 0 pa (+ one shortened to 97mm )
B102G89G111 $ 98 4.007” 3.517” 4.36” T CAT-966G-BUSH-D D 3 0 pa 9J7100 CE$43 ‘09 Mfr$44

B104G89-27 $ 60 4.133” 3.503” 1.08” T CAT-950-BUSH-BR D2 0 pa 9K9159 CE$27.62

B104G89G76 $110 4.129” 3.505” 3.00” TESK 2004 D 13 0 pa
B104G89G82 $ 90 4.128” 3.512” 3.24” T CAT-966G-BUSH-L,K D8 2 pa $40 4V8520 CE$40
B104G89G89 $120 4.129” 3.505” 3.50” TESK 2002 D 26 0 pa
B104G89G94 $120 4.128” 3.512” 3.70” T CAT-980C,F,G-BUSH-D,E D 12 0 pa 1V8242 CE$59

B104G89G102 $120 4.129” 3.505” 4.00” 6K71571 D8 0 pa

B104G89G110 $120 4.128” 3.510” 4.33” U CAT-950-962-BUSH-A D3 0 pa 3V2333 CE$43 Westrac$141
B104G89G111 $120 4.128” 3.512” 4.37” 4 ONLY D4 0 pa
B104-89G120 $120 4.128” 3.513” 4.75” CAT-966G 972-BUSH-A D3 0 pa 4V8673 CE$55

B108-89-46 $ 88 4.253” 3.507” 1.83” CAT983 D 12 1 pa $28 4J2379 CE $27.83

B108-89-57 $ 87 4.253” 3.508” 2.24” 1.35 kg CAT983 C 12 2 pa $29 8K7677 CE $54.60
B108-89-64 $ 97 4.253” 3.507” 2.50” TESK 2002 D 12 0 pa 5K4787 CE $28.30
B108-89-67 $ 99 4.253” 3.510” 2.65” 1.60kg CAT983 D 13 0 pa $33 8K7613 CE $52.96 MFR:$32
B108-89-101 $130 4.253” 3.507” 3.98” TESK 2002 D 15 0 pa

B110-89X75 $168 4.332” 3.505” 2.95” 1.88 kg A2U130-194277 A 75 64 pa $41 S’VIK $265 PG.98

B114-89-38 $ 80 4.502” 3.504” 1.50” CAT 28 RIPPER D 3 0 pa 4 USED

B114-89-51 $ 80 4.507” 3.529” 2.00” 1.58 kg 4T9751 RIPPER GROUP D 2 0 pa
B114G89G57 $110 4.502” 3.508” 2.25” 1.76 kg TESK 2003 D 15DISCOUNT
0 pa FOR QUANTITY
B114-89-64 $120 4.503” 3.507” 2.50” 2.00 kg 7K1513 - CAT983 BUSHINGS
D 13 0 pa

B114-89-73 $125 4.504” 3.506” 2.87” 2.30 kg 7J0052 D Quantity

30 0 pa Discounts Available only upon
B114-89-76 $135 4.505” 3.508” 3.00” 2.39 kg TESK 2009 Drequest
18 0 provided
pa all outstanding invoices
B114-89G85 $135 4.504” 3.517” 3.35” 3G6402 - CAT D9 D 2 0 are pa settled within 7 Days
B115G89X114 $200 4.530” 3.510” 4.50” LOGMAX BF8 D 11 0 pa 19W EXT, 112.7Ø 2X8Ø
Discount for 4 or more of any line item $ 8.00 ea
B121-89X108 $230 4.754” 3.508” 4.25” 4.35 kg INT. BLIND FIG 8 D 3 0 pa
Discount for 10 or more of any line item $ 11.00 ea
Discount for 20 or more of any line item $ 14.00 ea

Wear Life of Pin Materials

An Interesting Fact !
4140 Hardened & Tempered 29 Rockwell C
as available from steel merchants

K1045 - INDUCTION HARDENED 58 Rockwell C

58 Rockwell C (615 Brinell) resists wear about 10 times better and longer than 29 Rockwell C

4140 - INDUCTION HARDENED 58 Rockwell C - Very Resistant to Breakage

58 Rockwell C (615 Brinell) resists wear about 12 times better and longer than 29 Rockwell C

Discounts Available Only upon

request provided all outstanding invoices
are settled within 7 Days
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au
Discount for 4 or more of any line item $9
Page for
2310November
applies before GST & Freight Page 23 November 2013 Discount or more of any2013
line item $15
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 90mm DIAMETER SHAFT

PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES

Stocktake at 31-10-2013 JN31024
EX GST MULTITOOL
Usage $ 32.00 ea
Cost
12 Function plus GST $14,698
B100-90-70 $140 100.12mm 90.15mm 70 mm 0.80 kg T E S K 2 0 1 1 C 27 14 pa $27 Probore crushers
Sheffield Stainless Steel
B100F90N74 $166 100.06mm 90.13mm 74 mm 1.12 kg F B L - 5 0 3 1 4 0 C 8 4 pa $81
B100G90G75 $140 100.10mm 90.15mm 75 mm 0.86 kg T E S K 2 0 1 0 CIncludes
56 18 paPouch
$29
B100-90-80 $140 100.12mm 90.15mm 80 mm 0.90 kg T E S K 2 0 1 3 D 26 0 pa $30
B100G90G100 $180 100.10mm 90.15mm 100 mm 1.15 kg L 180 2 RQD. C 18 11 pa $34 WALLACE QUARRY
B100G90G137 $250 100.10mm 90.16mm 137 mm L 180 2 RQD. D 6 1 pa $41 For B100G90G280
Code: TL-3056
B105G90G49 $128 105.15mm 90.23mm 49.3mm ZX350-BUSH-I Offset groove D 9 0 pa Groove 19 frm Cfr end - 4438771
B105G90G50 $120 105.12mm 90.25mm 50 mm KATO 1250-H,G,L C 21 14 pa $26 107-4161-3000 1250SEV
B105-90-55 $114 105.10mm 90.16mm 55 mm 1.00 kg EX300-BUSH-I C616Pack5 pa $26
B105-90-60 $117 105.10mm 90.20mm 60 mm 1.12 kg T E S K 2 0 0 2 DMULTITOOLS
21 2 pa $28 $ 158.00 / 6
B105-90-70 $110 105.15mm 90.30mm 70 mm 4203425 HITACHI C 11 6 pa $31 EX 270&200 7CFRx5°
1.77 kg
B105-90X70 $140 105.10mm 90.16mm 70 mm PC200-BUSH-F 2x OF8 BCode: 46 12TL6-3056
pa $30 205-70-66550,205-70-72180
B105G90X70 $149 105.10mm 90.16mm 70 mm 1.24 kg T E S K 2 0 0 1 2xBF8 B 18 14 pa $35
B105G90X85 $154 105.18mm 90.28mm 85 mm 1.45 kg EX350-F - EX200-B,C,F B 21 14 pa $42 3038451 BF8 18mm W Ext.Groove
B105G90X88 $137 105.14mm 90.16mm 88 mm 1.55 kg PC300-BUSH-HR C 18 4 pa $42 207-63-76170
B105G90X89 $106 105.14mm 90.30mm 88 mm 1.57 kg $ REDUCED $ C9 5 pa $15 COOTE MISTAKE

B105G90G90 $120 105.13mm 90.18mm 90 mm 1.60 kg TESK 2001 C 18 8 pa $38

B105G90X90 $130 105.14mm 90.16mm 90 mm 1.59 kg PC300-BUSH-HL A 48 40 pa $45 207-70-33160
B105-90X92 $130 105.10mm 90.23mm 92 mm 1.62 kg PC300-BUSH-I OF8 C 23 8 pa $45 207-70-32150
B105G90X95 $140 105.13mm 90.30mm 95 mm 1.69kg SK330-6-K - KATO 1250-HL A 22+60 50 pa $46 707-76-90180 207-76-90130
B105G90X102 $202 105.12mm 90.20mm 102 mm 1.80 kg SK330-6 “HL” BF8 B 22 14 pa $51 SK330-8 “I” = B95G80X91

B105G90X110 $215 105.10mm 90.20mm 110 mm KATO 1250 “G” C 17 3 pa $54 KATO 1250 SEV “G”
B105G90X112 $198 105.11mm 90.18mm 112 mm 1.89 kg SK220-F - SK330-8-HL D 19 0 pa OF8, SK330-HL,K: is 113mm Wide
B105G90X115 $210 105.14mm 90.21mm 115 mm SK330-8-HR,J - KATO 1250-HR C 18 12 pa $55
B105G90X120 $226 105.14mm 90.21mm 120 mm 2.11 kg KATO 1250 “B” C 15 8 pa $56 329-1202-3001 SEV
B105G90X130 $242 105.13mm 90.25mm 130 mm 2.24 kg PC200-BUSH-A C 10 8 pa $64 205-70-65762 BF8

B106G90X90 $ 69 105.89mm 90.25mm 90 mm $ REDUCED $ Z7 4 pa MISTAKE

B106M90G90 $ 94 106.18mm 90.25mm 90 mm CAT-325-J External slot C 10 6 pa Was B106G90X90 C.E $36 = 7Y3553

B110G90X73 $154 110.14mm 90.21mm 73 mm 1.74 kg KATO 1250 “K” C 28 12 pa $39 337-4201-6000 SEV
B110-90-80 $176 110.12mm 90.15mm 80 mm 1.84 kg TESK 2011 D 17 0 pa $30 Probore crushers
B110-90X100 $199 110.14mm 90.21mm 100 mm 2.44 kg KATO 1250 “J” 2xOF8 D 6 0 pa 337-4201-0000 SEV x 4
B110G90X100 $203 110.15mm 90.24mm 100 mm 2.40 kg TESK B 26 14 pa $53
B110F90X102 $228 110.18mm 90.24mm 102 mm 3.24 kg PC300-BUSH-6-J 2F8 C 14DISCOUNT
5 pa $98 FOR QUANTITY
207-70-32140 F150X8,127x12?
BUSHINGS
B115G90X100 $220 115.13mm 90.18mm 100 mm 3.12 kg TESK 2009 C 14 14 pa $53
Quantity Discounts Available only upon
B120F90X100 $460 120.15mm 90.25mm 100 mm 4.88 kg SH300-2-BUSH-J O/BF8X2 request
C 8 4 pa $216 all outstanding
provided invoices
KSV0462 - F184.7x10.6,R105.0x8
B120F90X105 $340 120.18mm 90.33mm 105.9mm 4.10 kg SK250/260-BUSH-J OF8X2 C 6 3 pa$128 F154.9 x 6.0
B120F90X106 $280 120.14mm 90.36mm 105.9mm 4.16 kg are settled within 7 Days
PC350-7-BUSH-J OF8X2 B 28 14 pa$106 F149.8X7.5,R105.04X15,207-70-72460
B120G90G110 $199 120.14mm 90.30mm 110 mm $ REDUCED $ Discount
D 3 0 for 4 or more of any line item $ 8.00 ea
pa
B120G90X110 $274 120.14mm 90.29mm 110 mm O.S. TESK DDiscount
14 0forpa
10 or more of any line item $ 11.00 ea
Discount for 20 or more of any line item $ 14.00 ea

Wear Life of Pin Materials An Interesting Fact !

4140 Hardened & Tempered 29 Rockwell C
as available from steel merchants

K1045 - INDUCTION HARDENED 58 Rockwell C

58 Rockwell C (615 Brinell) resists wear about 10 times better and longer than 29 Rockwell C

4140 - INDUCTION HARDENED 58 Rockwell C - Very Resistant to Breakage

58 Rockwell C (615 Brinell) resists wear about 12 times better and longer than 29 Rockwell C
Discounts Available Only upon
request provided all outstanding invoices
are settled within 7 Days
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Discount for 4 or more of any line item $9
Phone 02 4932 3530 Fax:

02 4932 3100 Email: sales@kset.com.au Page 24 November 2013
applies before GST & Freight Page 24 November 2013 Discount for 10 or more of any line item $15
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 95mm & 3.75” DIAMETER SHAFT
PART No. PRICE OUTSIDE INSIDE LENGTH
MANUFACTURE NOTES Stocktake 28-10-2013 JN30927, JN31029
Ex GST Usage
POCKET KNIFE Cost - 4” $ 14.00$9,944
ea
B110G95G70 $ 124 110.13mm 95.20mm 70.0 mm 1.33 kg WA320-BUSH-D,E C 8Stainless
100% 3 pa $36Steel 707-76-95050
Plus GST
B110-95-72 $ 128 110.15mm 95.20mm 72.0 mm 1.40 kg WA420-3 C 21 6 pa $36 707-76-95040
B110-95G80 $ 140 110.13mm 95.20mm 80.0 mm 707-76-95010 Food
D 14Industry
0 pa Quality 427-70-11870
B110-95X80 $ 160 110.10mm 95.22mm 79.8 mm 1.40 kg WA380,420-BUSH-C Locking
D 17 Blade
2 pa $44 BF8 424-70-11770
B110-95X81 $ 160 110.13mm 95.20mm 80.0 mm WA320-BUSH-F OF8 Nylon
D 5Pouch
0 pa Can be up to 100mm Long

B110-95G90 $ 150 110.13mm 95.20mm 90.0 mm 385-1007-0591 D 6TL-3044

Code: 0 pa
B110G95X90 $ 164 110.13mm 95.20mm 90.0 mm 385-1007-0611 W120-2 D 9 1 pa $42
B110G95X95 $ 172 110.14mm 95.20mm 95.0 mm 1.80 kg WA470-BUSH-J C 19 3 pa $52 421-70-11241 ORIG=TYPE X,K$99
B110N95G95 $ 172 110.11mm 95.29mm 94.8 mm 1.80 kg WA470-I-BUSH-J 6 Pack;
D 4 Pocket Knives $ 68.00
2 pa $54 / 6 PG.120
421-70-21240
B110G95X105 $ 200 110.14mm 95.20mm 104.9 mm WA420-BUSH-A C 23TL6-3044
Code: 5 pa $52 424-70-11890
B110G95X115 $ 210 110.14mm 95.27mm 114.9 mm 2.16 kg WA470-BUSH-L,K C 38 8 pa $60 421-70-11251 15W Ext pg120

B115G95X115 $ 230 115.14mm 95.28mm 114.8 mm O.S. TESK 2009 D 4 2 pa $52

B114G96G88 $ 100 4.506” 3.763” 3.48” 2.12 kg T CAT 988B Bkt/Link D 12 0 pa $44 1V6934 CE $62 wideExtNoInt
B114G96G107 $ 120 4.505” 3.763” 4.21” 2.57 kg 1V7036 D 13 0 pa $52 CE $70
B121-96-76 $ 100 4.751” 3.754” 3.00” CAT 980-BUSH-J Z4 0 pa
B121G96N140 $ 160 4.754” 3.759” 5.50” CAT 980 Z4 0 pa 2 AT 3.761”Ø

TO SUIT 100mm DIAMETER SHAFT

B110G100G78 $ 140 110.10mm 100.15mm 78.0 mm TESK 2012 D 12 1 pa $37
B110-100-100 $ 190 110.12mm 100.16mm 100.0 mm 1. 29 kg L 180 4 RQD. C 23 4 pa $45 WALLACE QUARRY VOLVO
B110-100G140 $ 280 110.12mm 100.17mm 140.0 mm L 180 2 RQD. D 4 0 pa FOR B110G100G330

B115-100-52 $ 134 115.12mm 100.20mm 51.7 mm 1. 04 kg ZX350-BUSH-HR,HL(6) C 14 12 pa $26 Use B115G100X130 381857S
B115-100-60 $ 147 115.15mm 100.32mm 59.7 mm 1. 35 kg 3026075 HITACHI D 1 2 pa $26
B115-100-65 $ 152 115.15mm 100.29mm 65.0 mm 1. 29 kg EX300-BUSH-J B 27 4 pa $31
B115G100G70 $ 150 115.13mm 100.21mm 69.8 Groove 25 frm Cfr ZX350-BUSH-J,K C 12 4 pa $33 115.34X100.42,K3 3,4443885 sintered
B115G100X74 $ 170 115.15mm 100.20mm 74.0 mm PC45-BUSH-T C 23 6 pa $36 20T-70-71520

B115G100X80 $ 182 115.15mm 100.20mm 80.0 mm 1. 49 kg TESK 2001 A +31 32 pa $40 Scanforest
B115G100G85 $ 172 115.15mm 100.20mm 85.0 mm 1. 65 kg TESK 2003 D 11 1 pa $41
B115G100X90 $ 200 115.12mm 100.27mm 90.0 mm 1. 73 kg EX200-BUSH-A C 29 2 pa $50 MFR $49.50
B115-100X95 $ 200 115.15mm 100.20mm 95.0 mm PC400-BUSH-I D 12 2 pa $47 208-70-13141 OF8
B115G100X95 $ 204 115.15mm 100.20mm 95.0 mm 1. 84 kg PC400-BUSH-B,I,K A 35 35 pa $52 208-70-13141 707-76-10230

B115G100X105 $ 190 115.15mm 100.18mm 105.7 mm 2.04 kg PC300-BUSH-C,D,E B 37 18 pa $57 207-70-51440 707-76-10130
B115G100G108 $ 180 115.10mm 100.18mm 108.0 mm 2. 11 kg ZX300-BUSH-HR D 16 0 pa $51
B115G100X108 $ 190 115.10mm 100.18mm 108.0 mm 2. 10 kg PC450-LC-BUSH-HL C 12 7 pa $61
B115G100X110 $ 214 115.12mm 100.19mm 110.0 mm CAT320 CAT350 C 4 8 pa $58
B115G100X111 $ 214 115.10mm 100.18mm 111.0 mm 2. 13 kg OPEN/BLIND FIG 8 C 16 6 pa $58
B115G100X130 $ 286 115.10mm 100.25mm 129.7 mm 2. 70 kg PC220-BUSH-A 2F8 C 12+34 5 pa $67 206-70-61310,206-70-55240 pg68
DISCOUNT FOR QUANTITY
B116F100N87 $ 365 116.05mm 100.10mm 87.05mm 1. 92 kg FBL10-BUSH-J BUSHINGS503149 Bucyrus/Cat
D 26 0 pa
B116-100X130 $ 260 116.15mm 100.20mm 129.7 mm 2. 70 kg CAT325-BUSH-F D 6 0 pa NewmanQ
Quantity Discounts Available only upon
B117G100X95 $ 198 117.12mm 100.20mm 95.0 mm 2. 11 kg O.S. TESK request
D 19 0provided
pa $55 all outstanding invoices
B120G100-21 $ 110 119.99mm 100.43mm 21.0 mm 580 SLE 4W Ext D 9 1arepa
settled within 7 Days
D147280 TOP, OUTER 2X5Ø
B120G100-25 $ 110 119.99mm 100.43mm 25.0 mm 580 SLE 4W Ext D 3 1forpa
Discount 4 or more of101907A1 Lower,Outer 2X5Ø
any line item $ 8.00 ea
B120G100G70 $ 166 120.05mm 100.15mm 70.0 mm 2 kg TESK 2013 Discount for 10
D +20 0 pa or more of any line
Make!$11.00
item ea
Suits CAT
B120-100-75 $ 170 120.05mm 100.15mm 75.0 mm 2. 04 kg TESK 2002 C 19 for9 20
Discount more of any line item $ 14.00 ea
pa or$43
B120G100X115 $ 248 120.16mm 100.21mm 115.0 mm 3.06 kg TESK 2001 B 16 28 pa $67
B120F100X125 $ 270 120.16mm 100.20mm 125.0 mm PC400-BUSH-J F166 C 14 6 pa $72 208-70-32140 pg68

B120G100X150 $ 290 120.16mm 100.22mm 150.0 mm 4.00 kg TESK 12mm W Ext C 2+12 4 pa $81 DJM FAB
B130F100X106 $ 340 130.18mm 100.32mm 105.8 mm 4.68 kg PC450-8-BUSH-J C 1+22 12 pa $99 F165.9 x 7.5 R115.02 x10.1 K$499
B130G100X114
B135G100G100
$ 380
$ 320
130.16mm
135.15mm
100.22mm
100.22mm
114.0
100.0
mm
mm
4.67 kg
4.96 kg
TESK 2012
TESK 2009 Minimum $150
D 12 0 pa$104
C 7 4 pa $80
4 to MAAS suits Cat Import5

applies before GST & Freight

Tools and Accessories
may be used to make up
Minimum Wholesale Orders of $150
Prices subject to change without notice
KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 25 November
25 November 2013
2013
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS

TO SUIT 4” DIAMETER SHAFT...continued

PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES
Stock at 31-10-2013 JN31017, 18, 19
KNIFE, Auto-Loading $ 20.00 ea
EX GST Usage
Retractable,
Cost0.27 kg $5,628
B121-102-63 $240 4.752” 4.0085” 2.48” 0501-10097 D 8 0pa 5 Blades20.69x101.80x63.0 Cfr 2x45 deg
Includes
B121G102G70 $110 4.754” 4.007” 2.75” 1.78 kg 7K9545 DMade
2 0in
pa
Sheffield England =B121G102-70
B121G102G89 $140 4.754” 4.007” 3.50” 2.39 kg TESK TYPE I D 11 2pa $48
B121G102G108 $168 4.754” 4.007” 4.25” 2.90 kg 7K9532 C Code
10 9:TL-112-1
pa $54 =B121-102G108 CE $83.12 Mfr $54

B127-102X90 $150 5.006” 4.007” 3.51” FIG 8 OPEN/BLIND C 6 4pa $65

B127-102G110 $240 5.005” 4.016” 4.33” 3T9658 4paKNIVES
C611Pack; $66 D10N$Case&FrameCE$155
96.00 / 6
B127G102G127 $230 5.004” 4.006” 5.00” OVERSIZE 5K7991 CAuto-Loading,
3 2pa $60 Retractable
5K7991=B121-102G127

TO SUIT 105mm DIAMETER SHAFT Code: TL6-112-1

B120G105X75 $140 120.15mm 105.25mm 75.0mm 1.51 kg HD1250-BUSH-HL Z 6 0pa KATO 1250, 1800
B120G105X100 $195 120.15mm 105.25mm 100.0mm 2.03 kg HD1250-BUSH-C D 5 0pa KATO 1250 SEV “C”
B120G105X110 $210 120.15mm 105.25mm 110.0mm SH330-HR, HD-1250-D,E D 3 0pa KATO 1250 SEV “D,E”

B120G105X150 $250 120.17mm 105.25mm 150.0mm 1 UNBORED $ 200 Z 1 0pa

B120G105X157 $320 120.15mm 105.25mm 157.0mm KATO 1250 Z 3 0pa
B125G105X120 $250 125.15mm 105.22mm 120.0mm COBRA ZL 50G D 5 0pa

TO SUIT 108mm, 4.25” DIA SHAFT

B121G108-101 $265 121.26mm 108.50mm 101.0mm JOY D 19 0pa
B121G108G118 $150 4.755” 4.264” 4.64” 1V8241 CAT988C,F,G-BUSH-B,C D 6 0pa CE $58.71 - Mfr $61 ‘09
B124G108G101 $150 4.881” 4.263” 3.97” CAT - 5J8363 D 1 0pa CE $68

TO SUIT 110mm DIAMETER SHAFT

B125-110-45 $138 125.23mm 110.29mm 45.0mm 0 . 97kg EX350-B,C 8RQD B 24 6pa $24 4381855=Sint=125.38X110.44Ø
B125-110-54 $144 125.20mm 110.30mm 53.8mm 1.17kg EX350-BUSH-D,E D 18 1pa $24 4381859=Sintl=125.37x110.43Ø
B125-110G90 $180 125.06mm 110.22mm 89.8mm 1.94kg WA480-5-BUSH-B D 14 2pa $44 707-76-11030 10W Int.
B125G110G90 $192 125.07mm 110.18mm 89.8mm 1.94kg WA380,420-BUSH-D,E C 2+20 10pa $45 707-76-11010
B125G110X90 $208 125.14mm 110.28mm 89.9mm 1.95kg WA450,470-BUSH-C C 1+20 14pa $47 421-70-11381 50001

B125-110G100 $160 125.10mm 110.21mm 99.5mm 2. 13kg WA450,470-BUSH-B D 18 0pa 707-76-11040 9W Int
B125G110X100 $246 125.15mm 110.20mm 100.0mm 2. 10kg PC300-BUSH-F, PC600-I B 3+30 16pa $59 207-70-12161 2x0F8,
B125G110X101 $246 125.20mm 110.34mm 100.0mm 2.10kg EX350-BUSH-A D 9 1pa 3055478
B125-110G105 $180 125.16mm 110.28mm 104.8mm 2.23kg WA450,470-BUSH-A D 20 1pa $45 421-70-11261 10W Int.Only

B125G110X114 $248 125.18mm 110.31mm 114.0mm 2.40kg EX350-BUSH-F C +10 6pa $45 Sint.No Int. Groove Pg125
B125G110X116 $264 125.07mm 110.35mm 115.7mm 2. 50kg PC400-C,D,E, PC600-HR D 7 2pa $50 707-76-11130 2x8Ø ORIG:110.43
B125G110G120 $284 125.15mm 110.30mm 119.6mm 2. 51kg WA480,500-BUSH-K,L,J B 13 11pa $58 425-70-11820 2x8Ø Holes
B125G110X126 $310 125.15mm 110.20mm 126.0mm 2.68kg EX350 - Dogbone C 8 DISCOUNT
3 pa $73 FOR QUANTITY
BUSHINGS
B125G110X140 $330 125.15mm 110.20mm 140.0mm 2.98kg PC300-BUSH-A, PC600-HL C 6 6pa $80 207-70-61511,61610,31222,31220
B125-110X155 $330 125.14mm 110.35mm 154.8mm 3.26kg WA500-BUSH-J BF8 B 16Quantity Discounts425-70-11730
10pa $85 Available only BF8 &upon
Centre
B125G110X160 $410 125.10mm 110.39mm 160.0mm 3.38kg EXTRA EXT.GROOVE request
C 10 2pa provided
$85 all outstanding DJMinvoices
C40 M11
B130F110X72 $250 130.22mm 110.31mm 72.0mm WA500-1-BUSH-Fx2 D 0pa are settled within 7 Days
425-70-11341,11343 F145 N24 Pg115 Jim

Discount for 4 or more of any line item $ 8.00 ea

B130G110X140 $345 130.15mm 110.20mm 140.0mm 4.15kg O.S. TESK BF8 B 22 16pa $80 10mm Ext
B135G110G110R $225 135.05mm 110.27mm 109.9mm 4. 15kg WA420-BUSH-D,E CDiscount
+24 16pa 10 or more of
for$55 any line
R125x10x2 item $ 11.00
707-76-11050 eat
12W Iint,Ex
B135G110G120 $290 135.14mm 110.20mm 120.0mm 4. 56kg 0.S. TESK 2013 CDiscount
+12 for 20 or more of any line item $ 14.00 JN31018 ea
B140G110G126 $340 140.14mm 110.20mm 130.0mm 5. 79kg 0.S. TESK 2013 C+8 JN31019

Minimum $150
applies before GST & Freight
Tools and Accessories
may be used to make up
Minimum Wholesale Orders of $150
Prices subject to change without notice
KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 26 November
26 November 2013
2013
Located in the Newcastle - Sydney Region - Australia
 HARDENED & GROUND STEEL BUSHINGS
TO SUIT 4.5” DIAMETER SHAFT & Over
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES
Stocktake at 31-10-2013 JN30930
EX GST Usage
Cost $6,295
B133G114G130 $180 5.255” 4.513” 5.12” 1V8240 CAT980C,F,G-BUSH-A KNIFE
D 8 0 pa $ 14.00 ea
1V8240 CE$63.50
B133G114G150 $180 5.258” 4.515” 5.91” 5V1386 CAT950B,E,F-BUSH-F Yellow
D 2Ultra Grip
0 pa 5V1386 CE $80
B133G114G184 $180 5.255” 4.516” 7.22” 1V7001 CAT983,988B-BUSH-K Retractable,
D 24 0 pa
0.27 kg 1V7001 CE $120
B140-114-67 $ 98 5.504” 4.518” 2.63” 9J1914 - D11 RIPPERS Code:TL-115Y
D 1 0 pa $58
B140-114-117 $160 5.506” 4.519” 4.62” 4T3845 D 19 0 pa 11N Ripper Arm Westrac $367
6 Pack; KNIVES $ 68.00 / 6
TO SUIT 115mm DIAMETER SHAFT Yellow Ultra Grip
209-72-53170 Suits Komatsu BR 380 Jaw Crusher
B135G115X132 $380 135.23mm 115.39mm 131.8mm 3.9 kg PC600,PC800-BUSH-I,K TL6-115Y
C 8 0 pa 209-72-53170 was 115.47,17wide groove
B135F115X150 $380 135.22mm 115.49mm 149.7mm 5.74 kg PC650-6-BUSH-J OF8x2 C 10 0 pa 209-70-52141 F189.7x8 R130x15
Tabs:27-33-44-63-80-92-98-143-148-153-160-191
TO SUIT 120mm DIAMETER SHAFT
B130-120G145 $300 130.14mm 120.19mm 145.0mm 3 . 45 kg L 180 2 RQD. C 9 3 pa $76 WallaceQ Volvo $86
B135G120G95 $186 135.10mm 120.20mm 94.5mm 2 . 30 kg WA450,470-BUSH-E C 23 6 pa $58 707-76-12030 10W Ext,Int2x8Ø
B135-120X100 $244 135.11mm 120.32mm 99.8mm 2 . 35 kg WA500-BUSH-B,C BF8 D 10 1 pa $74 707-76-12041,425-70-11871,8W INT,
B135G120G105 $200 135.10mm 120.18mm 104.5mm 2 . 40 kg WA450,470-BUSH-D D 15 1 pa $65 707-76-12130 10W Ext,Int2x8Ø
B135-120X112 $272 135.17mm 120.38mm 112.0mm 2 . 60 kg PC400-BUSH-F OF8 C 15 4 pa $66 208-70-61521, 51420,1124 $79
B135G120X112 $275 135.17mm 120.38mm 112.0mm 2 . 60 kg TESK 2006 C 16 10 pa $66 $79

B135G120X120 $284 135.15mm 120.24mm 120.0mm 2 . 80 kg WA500-BUSH-D,E C 13 8 pa $88 707-76-12140 K$435

B135-120X130 $310 135.15mm 120.36mm 129.7mm 2 . 98 kg WA500-A,WA500-6-B,C C 15 4 pa $82 425-70-11891 425-70-31870 BF8 $90
B135G120X155 $340 135.15mm 120.36mm 154.8mm 3 . 65 kg WA500-6-BUSH-J D7 0 pa 425-70-31830
B135G120X160 $350 135.20mm 120.37mm 159.8mm 3 . 65 kg PC400-BUSH-A C8 4 pa $98 208-70-51410 208-70-31220 $K940
B135G120G175 $330 135.15mm 120.24mm 175.0mm 4 . 10 kg WA380,420-BUSH-F C6 5 pa$108 424-70-11860 14NExt

TO SUIT 4.75” DIAMETER SHAFT

B133-121H57 $120 5.255” 4.750” 2.23” Unhardened A2U913-194034 D 14 2 pa $22 Step 13.33x4 D10.3C27
B133-121-64 $140 5.255” 4.749” 2.50” 935-2939313 Z 1 0 pa Step133.3x3

TO SUIT 125mm DIAMETER SHAFT

B140-125-90 $186 140.17mm 125.32mm 89.6mm 2. 25 kg WA470-BUSH-F C 24 5 pa $71 421-70-11272,11872 Pg68
B140-125X95 $220 140.13mm 125.38mm 94.8mm 2. 35 kg WA600-BUSH-C C 16 4 pa $65 was 125.47 426-70-11871
B140-125X130 $320 140.15mm 125.42mm 129.7mm 3. 27 kg WA500-6-BUSH-D,E D 10 2 pa $93 425-70-31840
B140-125X196 $380 140.15mm 125.45mm 196.5mm 4. 80 kg WA600-3-BUSH-J BF8 C 14 3 pa$170 426-70-11710 8W INT
B145F125X93 $280 145.20mm 125.5 mm 92.6mm WA600-1-BUSH-J BF8 D 0 pa F159.9x35 Pg73
B150-125N150 $380 150.10mm 125.22mm 150.0mm A2U220-194399 D 10 0 pa$111 2-Stt helic grves 30pitch 6.5w x2.8

TO SUIT 5” DIAMETER SHAFT

B139G127-127 $354 5.510” 5.011” 4.98” JOY C 5 2 pa$103 Austral Hyd
B139-127G152 $250 5.505” 5.010” 6.00” 4.12kg 4 ONLY D 4 0 pa Cutting Edges Ph 4954 5522
B146G127G105 $180 5.755” 5.013” 4.13” 1V9143 CAT980C,F,G-BUSH-F D 3 0 pa CE $70
DISCOUNT FOR QUANTITY
B146G127G132 $180 5.755” 5.014” 5.19” 1V5635 CAT983,992C-BUSH-J C 21 2 pa $69
B146-127-140 $220 5.753” 5.009” 5.50” 7K8115 CAT983 D 0 pa BUSHINGS 1 CE $69.104.22kg 4.13kg
B146G127G140 $180 5.756” 5.014” 5.51” 4V8519 CAT966-BUSH-F D 0 pa
Quantity $84 Available
Discounts only
CE$84, 10w upon
Ext,4x6 4.38kg

TO SUIT 130mm DIAMETER SHAFT request provided all outstanding invoices

are settled within 7 Days
B140-130G162 $340 140.15mm 130.2mm 162.0mm 2 . 67 kg VOLVO L180 2 RQD. D 1 0 pa B140G130G330 WallaceQuarry
Discount for 4 or more of any line item $ 8.00 ea
B145G130X130 $390 145.10mm 130.25mm 129.8mm 3.20kg EX3500 BF8 A 13+30 28 pa$126 15wExt 145.085 x 130.255 x 129.5
Discount for 10 or more of any line item $11.00 ea
B150G130X145 $340 150.15mm 130.22mm 145.0mm 4.83kg TESK 2010 C15 for4 20
Discount pa$130
or more of any line item
(+/-) $ 14.00 ea
EX800-5-BUSH-HL
B150-130-74 $190 150.17mm 130.27mm 74.0mm 4.00kg TESK 2013 D 0 pa $80 DJ Ruskin request for Hitachi
B150-130-89 $220 150.17mm 130.27mm 89.0mm 4.00kg TESK 2013 D 0 pa $80 DJ Ruskin request for Hitachi

B160-130-75 $190 160.18mm 130.28mm 75.0mm 4.00kg TESK 2013 D 7 2 pa $80

B160-130-90 $220 160.18mm 130.28mm 90.0mm 4.80kg TESK 2013 D 6 2 pa $94
B160-130-120
B160G130X180
$290
$460
160.18mm
160.18mm
130.28mm 120.0mm
130.28mm 180.0mm
6.40kg
9.39kg
TESK 2010
TESK 2010 Minimum $150
D 10 1 pa$125
D 12 0 pa$204
B165F130X149 $670 165.20mm 130.42mm 149.0mm 9.7kg PC800-6-BUSH-J 2xOF8 Dapplies
0 2 pa before GST & Freight
209-944-5230 F204.8 N8 R150x15
Tools and Accessories
may be used to make up
PRICES DO NOT INCLUDE GST Minimum Wholesale Orders of $150
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE Prices subject to change without notice
KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 27 November
27 November 2013
2013
Located in the Newcastle - Sydney Region - Australia
HARDENED & GROUND STEEL BUSHINGS
TO SUIT 140mm DIAMETER
PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES Stocktake at 30-06-2013 JN30729b, JN30930
EX GST Usage
Cost $18,228
B155-140G135 $290 155.20mm 140.47mm 135.0mm 3.55 kg WA600-BUSH-A,B,D,E D1 0 pa 426-70-11890
B155G140G135 $320 155.20mm 140.47mm 135.0mm 3.55 kg WA600-BUSH-L D1 1 pa $146 426-70-11820 K$509
B155G140X135 $350 155.20mm 140.33mm 135.0mm TESK 2009 BF8 C 17 3 pa $165 DJM
B155G140X196 $480 155.15mm 140.45mm 196.5mm WA600-3-BUSH-K 2BF8 D 2 pa $150 426-70-11720 12W Ext,IntK$661

B155G140X215 $540 155.15mm 140.35mm 215.0mm 5.16 kg WA500-BUSH-F C6 3 pa $240 425-70-11861

B160F140X93 $390 160.26mm 140.50mm 92.5mm WA600-1-BUSH-K ZD 0 pa F175x38 F8 426-70-11942 Pg73
B160G140X163 POA 160.20mm 140.50mm 163.0mm PC1250-BUSH-K D2 0 pa
B175F140X193 POA 175.20mm 140.52mm 193.0mm PC1250-BUSH-J F230x8.2 D2 0 pa R160x15,4start helical grooves
TO SUIT 150mm DIAMETER SHAFT & OVER
B186G150X165 $360 186.10mm 150.23mm 165.0mm 2 ONLY TYPE J Z 2 0 pa
B171-152-59 $360 6.7545” 6.009” 2.32” 2.31kg 0501-10096 D 14 6 pa $104 Juganaut - UGM
B178G152G50 $200 7.007” 6.004” 2.00” 1 ONLY TO CLEAR Z 1 0 pa

B180-160-95 $275 180.15mm 160.42mm 94.6mm WA500-6-BUSH-F D 0 pa 425-70-31820 10x1.5 V grooves

B180-160G140 $440 180.29mm 160.42mm 140.2mm 5.87 kg WA600-BUSH-F C 13 0 pa 426-70-11860 10W INT K$738
B185G160X150 $520 185.25mm 160.40mm 150.0mm 9.92kg 2 ONLY 2xBF8 D2 0 pa

B203-178G187 $350 8.002” 7.006” 7.36” 2 ONLY TO CLEAR Z 2 0 pa CHECK DIAMETERS!

B220-200-118 $280 220.mm 200.*mm 118.0mm 1 ONLY TO CLEAR Z 1 0 pa SUMMS

Bronze Bearings - LG2 Bushes

PART No. PRICE OUTSIDE INSIDE LENGTH MANUFACTURE NOTES Stock 01-07-2013 JN30705
EX GST Diameter Diameter Usage
Cost
BB36-26-34 $ 30 34.45mm 25.5mm 34.0mm 3 ONLY Z 3
BB54F44-40 $ 35 54.50mm 44.50mm 40.0mm 2 ONLY Z 2
BB52-46-44 $ 25 2.064” 1.813” 1.75” CHAM 39591 Z 4
BB64F51N49 $ 120 2.5025” 2.0035” 1.93” 0310-10017 F72.6x3.6 C 1 Juganaut UGM

BB82G70-67 $ 65 3.255” 2.759” 2.65” 11W ExtGr BUSH-STRG-633 - 8J9926 D 1 CE $30.43 Minus11HRC 4holes
BB83G64X89 $ 94 3.251” 2.505” 3.50” Eimco A2U130-194369 - 222 410 A 69 80 pa $ 45
BB95G76X127 $ 148 3.754” 3.004” 5.00” Eimco 222 413 C 22 11 pa $ 86
BB95G83G80 $ 85 95.13mm 3.275” 80.3mm 2:10:31 808-00216 - JCB3CX Z 3 2:10:31
BB100F85X35 $ 185 100.07mm 85.10mm 34.96mm Sandvik 2643 3298 Flange Bearing A 23 16 pa $ 65 F125.0 N9.97 R2
BB100F85X74 $ 273 100.08mm 85.10mm 74.00mm Sandvik 2643 3318 Flange Bearing C 58 10 pa $ 92 F125x10

B102G90G101 $ 280 102.49mm 90.42mm 101.mm Cram JOY 100163420 2 Housing4.035” fitted bush3.560”
BB108G89X76 $ 106 4.251” 3.506” 3.00” Eimco 222 412 1.9 kg A 44 19 pa $ 58
BB114G89X64 $ 130 4.501” 3.505” 2.50” Eimco 222 411 2.2 kg A 66 50 pa $ 59
BB114G89X148 $ 218 4.500” 3.505” 5.81” Eimco 247 065 A 66 40 pa $104
BB121G102X64 $ 110 4.752” 4.005” 2.50” Eimco 6422 6271 = 226 271 C 12 10 pa $ 54 S’VIK $115
BB117G105G59 $ 80 4.612” 105.15mm 58.7mm 808-00214 - JCB3CX Z 3 1:5:7.5

Misc. Parts
N171-74T38 $ 214 6.747” 3” UNF 1.50”NUT for P89G222PT A2U130-196120, A2U130-196152 A 21 12pa $70 Tolp$47 Oxy$19,Svik$334
N178-88T38 $ 274 7.006” M90 x 2 1.50”NUTfor A2U220-193387 A2U220-196134 A 11 8pa $80 Svik$372
R229-114-19 $ 235 8.998” 4.4995” 0.75” RETAINER 242 346 C2
B41-19-84 $ 20 1.625” 0.753” 3.32” R56188, R124230 Z41
B38-27-87 $ 20 1.496” 1.076” 3.41” D90422 27 ONLY Z27
B38-27-99 $ 24 1.496” 1.061” 3.90” D45904 EX STOCK Z108
B38-27-111 $ 30 1.496” 1.065” 4.37” .48 kg D31219 EX STOCK ZZ43
B35S32T25 $ 26 1.373” 1.28”Maj 1.00” JOHN DEERE U41089 ZZ40 10° TPR/SPLIT
B55S18T44S $ 74 54.95mm M20x1.5 44.0mm 4140 No HT Split Collet 114 809 54 C45 Suits Pins PDS26498041, 042 ZnPl
B55S18T49S $ 74 54.95mm M20x1.5 49.0mm 4140 No HT Split Collet 114 809 65 C57 Suits Pins PDS26438771, 772 ZnPl
B55S21T38S $ 74 54.95mm M24x3 38.0mm 4140 No HT Split Collet 114 809 43 C45 Suits Pins PDS26498041, 042 ZnPl
B55S21T43S $ 74 54.95mm M24x3 43.0mm 4140 No HT Split Collet 114 809 76 C57 Suits Pins PDS26438771, 772 Zn Pl
B63-38-41 $ 42 2.503” 1.503” 1.61” = Eimco A2U913-194001 Z4 NO H.T.
B63-38H41 $ 60 2.503” 1.503” 1.61” = Eimco A2U913-194016 Z4 NO H.T. 2:14:19
B82S76T35 $ 80 3.240” 2.98”Maj 1.34” U46702 ZZ3 U46702 C/H ZnP1 10TPR/SLIT
B86F76-80HT $ 260 3.375” 3.001” 3.150” = Eimco EA8002 ZD6 LONGWALL HAUL
B106T76-11 $ 130 106.25mm 3.001” 11.2mm = Eimco 913-500 003 ZZ PAGE 70 Sandvik $45
B114-102-60 $ 90 4.504” 4.006” 2.37” = Eimco A2U913-194355 ZC STATIC BOSS STEP 114.2Øx5mm
B133G121H57 $ 150 5.255” 4.750” 2.23” 2xD10 C27 A2U913-194034 16HRC ZC Bush-Top Artic.STEP 133Øx5mmOE 8wExtGr

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 28 November
28 November 2013
2013
Located in the Newcastle - Sydney Region - Australia
 Pin Wipers & Seals

PART No. PRICE OUTSIDE INSIDE WIDTH MANUFACTURE NOTES Stocktake 31-10-2013
EX GST Diameter Diameter Usage
Cost $4,4559
SL55-45-04 $10 55 mm 45 mm 4 mm .02 kg Sub for 07145-00045 24 6 pa $ 5
SL60-50-04 $16 60 mm 50 mm 4 mm .02 kg Sub for 07145-00050 24 6 pa $ 8

SL75-60-04 $14 75 mm 60 mm 4 mm .03 kg Sub for 07145-00060 36 6 pa $ 7

SL75-60-08 $30 75 mm 60 mm 8 mm .04 kg Sub for 203-70-33210 14 32 pa $ 15

SL80-65-04 $18 80 mm 65 mm 4 mm .03 kg Sub for 07145-00065 24 6 pa $ 9

SL80-65-08 $36 80 mm 65 mm 8 mm .05 kg Sub for 707-77-65110 12 6 pa $ 18

SL85-70-04 $16 85 mm 70 mm 4 mm .03 kg Sub for 07145-00070 40 6 pa $ 8

SL85-70-08 $30 85 mm 70 mm 8 mm .05 kg Sub for 21K-70-12180 24 60 pa $ 15

SL95-80-04 $36 95 mm 80 mm 4 mm .04 kg Sub for 07145-00080 26 24 pa $ 18

SL95-80-08 $26 95 mm 80 mm 8 mm .06 kg Sub for 205-70-62140 36 6 pa $ 13
SL95-80-10 $56 95 mm 80 mm 10 mm .07 kg Sub for 205-70-62150 10 24 pa $ 28

SL105-90-04 $28 105 mm 90 mm 4 mm .04 kg Sub for 07145-00090 6 20 pa $ 14

SL105-90-08 $36 105 mm 90 mm 8 mm .06 kg 205-70-62180 207-70-72120 18 24 pa $ 18
SL105-90-11 $56 105 mm 90 mm 11 mm .07 kg Sub for 207-70-12270 6 6 pa $ 28

SL115-100-04 $40 115 mm 100 mm 4 mm .04 kg Sub for 07145-00100 10 6 pa $ 20

SL115-100-08 $56 115 mm 100 mm 8 mm .07 kg Sub for 208-70-12231 20 30 pa $ 28
SL115-100-10 $76 115 mm 100 mm 10 mm .09 kg Sub for 205-70-62160 8 6 pa $ 38

SL125-110-04 $36 125 mm 110 mm 4 mm .05 kg Sub for 07145-00110 8 6 pa $ 18

SL135-120-04 $40 135 mm 120 mm 4 mm .06 kg Sub for 07145-00120 8 6 pa $ 20

Shim Kits - Spacers - Thrust Washers

PART No. PRICE OUTSIDE INSIDE WIDTH MANUFACTURE NOTES Stock 01-07-2013 JN30705
EX GST Diameter Diameter Usage
Cost
SM37 $ 18 63 mm 37.5 mm 3mm 10 per Pack Z 587 Bore to 38.5 for U11649
SM44 $ 18 70 mm 44.5 mm 3mm 10 per Pack Z 235
SM45 $ 18 70 mm 45.2 mm 2mm 10 per Pack Z 312
SM46 $ 18 80 mm 46.0 mm 1mm, 2mm, 3mm 2 of each per Kit B 8 24 pa $ 4.32
SM51 $ 19 100 mm 51.0 mm 1mm, 2mm, 3mm 2 of each per Kit B 4 36 pa $ 6.71
SM61 $ 21 110 mm 61.0mm 1mm, 2mm, 3mm 2 of each per Kit B 13 8 pa $ 8.11
SM64 $ 34 101 mm 63.5 mm 10mm Single Thrust Washer D 7 T79849 John Deere
SM65 $ 30 114 mm 65.0 mm 5mm Single Thrust Washer D T67205 John Deere
SM66 $ 22 115 mm 66.0 mm 1mm, 2mm, 3mm 2 of each per Kit B 13 30 pa $ 7.50
SM71 $ 25 130 mm 71.0 mm 1mm, 2mm, 3mm 2 of each per Kit A 11 42 pa $ 11.34
SM76 $ 34 113 mm 78.0 mm 6mm Single Thrust Washer Z 15 T43810 Int Cfr 2.5x45o
SM77 $ 26 127 mm 77.0 mm 1mm, 2mm, 3mm 2 of each per Kit D 15 4 pa $ 9.24
SM81 $ 26 130 mm 81.0 mm 1mm, 2mm, 3mm 2 of each per Kit A 13 60 pa $ 11.34
SM91 $ 30 150 mm 91.0 mm 1mm, 2mm, 3mm 2 of each per Kit B 15 30 pa $ 13.26
SM101 $ 37 150 mm 101.0 mm 1mm, 2mm, 3mm 2 of each per Kit B 16 24 pa $ 13.26
SM111 $ 39 160 mm 111.0 mm 1mm, 2mm, 3mm 2 of each per Kit C 18 12 pa $ 15.04
SM121 $ 46 170 mm 121.0 mm 1mm, 2mm, 3mm 2 of each per Kit D 13 2 pa $ 16.70

Minimum $150
applies before GST & Freight
Minimum $150
Tools and Accessories
applies
may bebefore
usedGST & Freight
to make up
PRICES DO NOT INCLUDE GST Minimum Wholesale Orders of $150
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE Prices subject to change without notice
KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 29 November
29 November 2013
2013
Located in the Newcastle - Sydney Region - Australia
Located in the Newcastle - Sydney Region - Australia
 INDUCTION HARDENED K1045 BRIGHT SHAFT
BUY FROM US TODAY
AND MACHINE YOUR OWN LONG-WEARING HIGH TENSILE PINS TOMORROW!

WE HAVE 1000mm LENGTHS EX STOCK FROM 16mm DIA. TO 140mm DIA.

FOR THIS IMPROVED ENGINEERING CONCEPT:

YOU CAN EASILY MACHINE THIS PRE-HARDENED SHAFTING WITH

Mitsubishi Carbide VP15TF and ISCAR IC 907
YOU CAN PART IT OFF ! in the LATHE with ISCAR IC908, IC354 OR IC328
TUNGSTEN TIPS
YOU CAN MACHINE CIRCLIP GROOVES! ~ as narrow as 1.2mm with ISCAR IC908
YOU CAN DRILL IT! WITH MASONRY DRILLS, SOLID CARBIDE ETC, OR SPOT ANNEAL
WITH FLAME, THEN DRILL WITH HIGH SPEED STEEL!
YOU CAN BORE IT! WITH CONVENTIONAL TOOLS WITHIN 5mm OF SURFACE!
YOU CAN MILL IT! WITH ISCAR IC908 & IC830 TUNGSTEN INSERTS.
YOU CAN WELD IT! WITH GENERAL PURPOSE ELECTRODES & MIG.

THE EARTHMOVING ENGINEER’S FIRST CHOICE:

MOST PINS USED IN EARTHMOVING EQUIPMENT BY ORIGINAL MANUFACTURERS ARE INDUCTION HARDENED K1045
TOUGHNESS ~ THE ABILITY TO RESIST BREAKING ~ IS BEST PRODUCED BY INDUCTION HARDENING
WHICH RESULTS IN MUCH HIGHER SHEAR STRENGTH, HIGHER TENSILE AND YIELD STRENGTH THAN IN NORMALISED 4140
SURFACE HARDNESS ~ THE ABILITY TO RESIST WEAR BY ABRASION ~ IS PRODUCED TO GREATEST DEPTHS BY
INDUCTION HARDENING TO AN OPTIMUM 58 ROCKWELL C (625 BRINELL) AT WHICH HARDNESS WE COULD
EXPECT K1045 TO OUTLAST NORMALISED 4140 BY 4 TIMES. WE DO NOT RECOMMEND SURFACE HARDNESS
OVER 60 HRC (FILE - HARD) FOR PINS IN A HEAVY IMPACT SITUATION.

THE EARTHMOVING ENGINEER’S ULTIMATE PIN

IN SOME CASES WE RECOMMEND INDUCTION HARDENED 4140 TO SURFACE HARDNESS 650 BRINELL. THE COST
INCREASE (APPROX. 55%) IS JUSTIFIED BY THE PROPORTIONAL INCREASE IN TENSILE STRENGTH, AND A SMALL
INCREASE IN ABRASIVE WEAR RESISTANCE.

Page 30
 K-SET SUPER BAR - 1 METRE LENGTHS
N EW INDUCTION HARDENED PRECISION GROUND 4140 ROUND BARS

NOMINAL PRICE NOMINAL PRICE NOMINAL PRICE

DIAMETER EXCL. G.S.T. WEIGHT
DIAMETER EXCL. G.S.T. WEIGHT
DIAMETER EXCL. G.S.T. WEIGHT

7/8” 22.2mm $ 85 3.1kg 40mm $ 148 9.9kg 70mm $ 489 30.2kg

25mm $ 85 3.9kg 1 3/4” 44.4mm $ 190 12.2kg 75mm $ 524 34.7kg
1” 25.4mm $ 88 4.0kg 45mm $ 212 12.5kg 3” 76.2mm $ 549 35.8kg
1 1/8” 28.5mm $ 90 5.1kg 50mm $ 258 15.4kg 80mm $ 678 39.5kg
30mm $103 5.6kg 2” 50.8mm $ 260 15.9kg 80 x .8m $ 560 31.6kg
1 1/4” 31.75mm $120 6.2kg 60mm $ 358 22.2kg 90mm $ 790 50.0kg
35mm $135 7.6kg 2 1/2” 63.5mm $ 392 24.9kg 100mm $1060 61.7kg
1 1/2” 38.1mm $144 9.0kg 65mm $ 414 26.0kg 100 x .6m $ 710 37.0kg

HARDNESS: 59-61 ROCKWELL C. GROUND TO h9 TOLERANCE = PLUS 0.0mm / MINUS TOLERANCE SHOWN:
UPTO 30mm DIA: MINUS 0.05mm, 1.25” to 50mm DIA: MINUS 0.06mm, 2” to 80mm DIA: MINUS 0.074mm

INDUCTION HARDENED K1045 BRIGHT ROUND BARS

CONVENIENT 1 METRE LENGTHS CLEAN END PINS FOR EASY BOLT HOLE DRILLING;
ONE END FOR 50mm IS NOT HARDENED
PRICE PRICE
DIAMETER LENGTH EXCL. G.S.T. WEIGHT DIAMETER LENGTH EXCL. G.S.T. WEIGHT
3/4” 19mm x 1m $ 60 2.3kg 40mm x 600mm $ 84 6.0kg
20mm x 1m $ 60 2.5kg 1 3/4” 44.4mm x 500mm $ 83 6.1kg
22mm x 1m $ 63 3.0kg 45mm x 600mm $ 90 6.3kg
7/8” 22.2m x 1m $ 63 3.0kg 50mm x 600mm $ 123 9.3kg
25mm x 1m $ 65 3.9kg 2” 50.8mm x 600mm $ 126 9.6kg
1” 25.4mm x 1m $ 66 4.0kg 55mm x 600mm $ 166 11.2kg
1 1/8” 28.5mm x 1m $ 76 5.0kg 2 1/4” 57.1mm x 600mm $ 168 12.1kg
30.0mm x 1m $ 76 5.6kg 60mm x 600mm $ 179 13.3kg
1 1/4” 31.7mm x 1m $ 84 6.2kg 2 1/2” 63.5mm x 600mm $ 190 15.0kg
1 3/8” 34.9mm x 1m $ 103 7.5kg 65mm x 600mm $ 202 15.6kg
35mm x 1m $ 103 7.6kg 2 3/4” 69.8mm x 600mm $ 224 18.0kg
1 1/2” 38.1mm x 1m $ 96 9.0kg 70mm x 600mm $ 224 18.1kg
40mm x 1m $ 108 9.9kg 71mm x 860mm $ 480 26.7kg
1 3/4” 44.4mm x 1m $ 120 12.2kg 75mm x 600mm $ 250 20.8kg
45mm x 1m $ 135 12.5kg 3” 76.2mm x 600mm $ 256 21.5kg
50mm x 1m $ 168 15.4kg 3” 76.2mm x 800mm $ 310 28.7kg
2” 50.8mm x 1m $ 170 16.0kg 80mm x 500mm $ 268 19.8kg
55mm x 1m $ 211 18.7kg 80mm x 600mm $ 286 23.7kg
2 1/4” 57.1mm x 1m $ 219 20.2kg 80mm x 800mm $ 370 31.6kg
60mm x 1m $ 230 22.2kg 3 1/4” 82.5mm x 600mm $ 297 25.2kg
2 1/2” 63.5mm x 1m $ 258 24.9kg 85mm x 600mm $ 302 25.2kg
65mm x 1m $ 269 26.1kg 85mm x 800mm $ 380 35.6kg
2 3/4” 69.8mm x 1m $ 325 30.1kg 3 1/2” 88.8mm x 600mm $ 358 29.2kg
70mm x 1m $ 325 30.2kg 88.8mm x 800mm $ 450 39.0kg
75mm x 1m $ 359 34.7kg 90mm x 498mm*30mm $ 308 25.0kg
3” 76.2mm x 1m $ 370 35.8kg 90mm x 600mm $ 368 30.0kg
80mm x 1m $ 438 39.5kg 90mm x 650mm $ 398 32.5kg
80mm x 1050mm $ 468 41.5kg 90mm x 800mm $ 460 40.0kg
3 1/4” 82.5mm x 1m $ 488 42.0kg 90mm x 830mm*30mm $ 475 40.0kg
85mm x 1m $ 460 44.6kg 95mm x 600mm $ 420 33.4kg
3 1/2” 88.8mm x 1m $ 540 48.8kg 95mm x 800mm*30mm $ 510 44.5kg
90mm x 1m $ 550 50.0kg 100mm x 600mm $ 490 37.0kg
95mm x 1m $ 627 55.6kg 100mm x 818mm*30mm $ 620 49.4kg
100mm x 1m $ 740 61.7kg 4” 101.5mm x 762mm $ 560 48.5kg
4” 101.6mm x 1m $ 695 63.7kg 101.5mm x 600mm $ 446 38.2kg
110mm x 1013mm $ 920 75.6kg 4140:$588 110mm x 600mm $ 538 44.8kg
115mm x 1060mm $ 1040 81.6 kg 110mm x 800mm $ 695 59.7kg
120mm x 1014mm $ 1090 90.0kg 4140:$925 120mm x 800mm $ 840 71.0kg
125mm x 875mm $ 1090 96.4kg 130mm x 800mm $ 1170 83.4kg
130mm x 1000mm $ 1200 104.2kg 140mm x 650mm $ 950 78.7kg
140mm x 1014mm $ 2180 122.6kg *DENOTES 30mm SOFT END.

CUTTING CHARGES - FOR PRE-PAID ORDERS ONLY

19 DIA TO 38 DIA $20 40 DIA TO 60 DIA $30 63 DIA TO 80 DIA $45 83 DIA TO 100 DIA $60 100 DIA TO 120 DIA $75 NO CREDITS GIVEN FOR OFFCUTS
BULK DISCOUNT SCHEDULE:
APPLIES ONLY TO SINGLE CONSIGNMENTS OF THE ABOVE BARS, WHETHER MIXED DIAMETERS OR THE SAME
1 TONNE RATE: 30% DISC. PER 950kg to 1250kg. 1/2 TONNE RATE: 22% DISC. PER 450kg to 949kg

H10 STANDARD MAUFACTURING TOLERANCE FOR BRIGHT BAR = PLUS 0.0mm / MINUS AMOUNT SHOWN BELOW
BARS UP TO 30mm Ø : -0.084mm 31 to 50 Ø: -0.1mm 51 to 80 Ø: -0.12mm 81 to 120 DIA: -0.14mm Ø
PHONE order before 3.00pm. Ph 02 4932 3530 Fax: (02) 4932 3100 Email: sales@kset.com.au Page 31
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 32 November 2013
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 33 November 2013
STEEL PINS INDUCTION HARDENED K1045 20C,26.5RL,38C,49L,101R,142R,147R,152R,157R192R

KSet Eng Price Diameter Length MANUFACTURE NOTES Stock 31-10-2013

Part No.
Ex GST ORIGINAL PART CODES LOCATION GUIDES Usage
Cost $6,039
P19-1000 $ 55 0.749”K1045 h10 - Induction Hardened Full Length A 91
1metre 24 pa
DRILL $15
11/32”
P20-1000 $ 50 19.97mmK1045 h10 - Induction Hardened Full Length C +12
1metre 7 pa
HSS Long Series Where is +30JN0501 ?

PG20-1000 $ 60 19.98mmPrecision Ground 4140 Induction Hardened
1metre D 14 0 pa Plus 6 Random Shorts:
For Zerk Grease Fitting
448mm,550,685,594,605,687
P22-1000 $ 63 21.97mm 1metre K1045 h10 - Induction Hardened Full Length D degrees
135 0 pa Split Point 4 in 2011
P22-195R $ 20 0.874” 7.68” 1:8:19 John Deere - AT36108 Z 10 0 pa IH 1040 RING=50x26x13
P22-214R $ 20 0.874” 8.43” 1:8:19 John Deere - AT36110 Z Titanium
2 0 pa Nitride Coated
IH 1040 RING=50x26x13
P23-1000 $ 63 $ 20.00$16
0.874” 1metre K1045 h10 - Induction Hardened Full Length C 20 8 pa ea plus GST
P25-82H $ 42 24.92mm 82mmUH 1:5.3:8.7 John Deere - T69354 Z 54 0 pa CH 1020 H=32x5.4
P25-95C $ 20 24.94mm 95mm 2C2.3:6.5 John Deere - T133618 Z Code:
7 0 paTL-9ELI1132 315 1045
P25-150H $ 46 24.92mm 150mmUH 1:5.3:9 John Deere - T69355 Z 7 0 pa CH 1020 H32x5.4
P25-1000 $ 60 24.98mm 1metre K1045 h10 - Induction Hardened Full Length C 83 20 pa $18
6 Pack
P26-130 $ 33 0.999” 5.12” 1:11:12.7 5717862 SCATRAK Z DRILLS
8 0 pa 11/32”
P26-135H $ 30 0.998” 5.31” Has Handle John Deere - AT34906 Z 35 0 pa
P26-203 $ 39 0.998” 7.99” 1:7:10 John Deere - U42449 Z $489.00 /6
0 pa NEW U42449
Code: TL6-9ELI1132
P26-800 $ 50 0.998” 800mm K1045 h10 - Induction Hardened Full Length D 10 0 pa
P26-1000 $ 60 0.998” 1metre K1045 h10 - Induction Hardened Full Length C 47 26 pa $18
PG26-1000 $ 80 0.999” 1metre Precision Ground 4140 Induction Hardened C 29 9 pa $25
PG29-1000 $ 90 1.124” 1metre Precision Ground 4140 Induction Hardened B 22 12 pa

P30G168 $ 30 29.95mm 169mm 1:11:22 66,119 5 ONLY TO CLEAR Z 2 0 pa NOT JCB 801-50175
P30G204 $ 45 29.97mm 204mm 1:8.14 1-5-98 00013-23003 TCHI D 0 pa
P30-1000 $ 70 29.97mm 1metre K1045 h10 - Induction Hardened Full Length A 36 54 pa $22 PLUS 35 OVERSIZE BARS
PG30-1000 $ 90 29.98mm 1metre Precision Ground 4140 Induction Hardened D 1 pa Marked Red, SOFT

P32-125 $ 50 1.248” 4.92” Pin Z 2 0 pa

P31-1000 $ 50 1.246” 1metre K1045 h11 - Induction Hardened Full Length Z34 0 pa GREEN END
P32-1000 $ 80 1.248” 1metre K1045 h10 - Induction Hardened Full Length A 48 44 pa $23
PG32-1000 $ 98 1.249” 1metre Precision Ground 4140 Induction Hardened B 19 6 pa $34

P34-999 $ 60 1.370” 1metre K1045 h11 - Induction Hardened Full Length Z 9 0 pa in junk rack
P35-351 $ 60 34.95mm 350mm K1045 h10 - Induction Hardened Full Length B 10 3 pa $15 FITS INTO 3 kg AIRBAG
P35-451 $ 60 34.95mm 450mm K1045 h10 - Induction Hardened Full Length B 11 1 pa $17 FITS INTO 5 kg AIRBAG
P35-1000 $ 90 34.97mm 1metre K1045 h10 - Induction Hardened Full Length A 45 42 pa $26
PG35-1000 $102 34.98mm 1metre Precision Ground 4140 Induction Hardened D 0 pa

P38-108 $ 26 1.499” 4.25” 1:13.5:14 John Deere - T33236 Z 6 0 pa

P38G113C $ 42 1.4965” 4.47” 2C2.7:9 1-5-57 - D77326 Case 580 - D89321 Z 23 0 pa New PG38-100M Mtl$4.50 Mch$26
P38-100M $ 90 1.495” 3.94” A2U912-193014 A2U130-193335 A 19 10 pa $33 C13 M7 J6 Pg74
P38G105P $ 70 1.498” 4.13”uh P38G105P P=Q35 G52uh 0505-10021 C 2CARBON
0 pa TAP JUGANAUT / VLI Diesel
P38-128M $ 90 1.495” 5.04” K,S=3x30° EA6003-6 A2U130-193334 A 201/8”8xpa $35
27 NPS C12 M7 J5.8 Pg74
P38-130 $ 24 1.496” 5.11” 1:10:16 Case 580 - D67357 Z 39Bottoming
0 pa Tap for
P38-134T $160 1.499” Hollow Pin, TaperEnds A2U913-193122 Z 0Zerk
0 Grease
pa Fitting
P38-137 $ 62 1.490” 5.39” 1:13:59 John Deere - T41978 Z 85$ 22.00
0 pa ea D&T½”UNC
P38-137C $ 44 1.498” 5.39” C=10,E=117,M=3 Case 580 - D44881 D 1 0 pa `
P38G140 $ 52 1.490” 5.51” 1:10:13 1-5-60 - AT90343 John Deere - T41973 Z 8Code: TL-NPSFCB18
0 pa NO REC
P38-142M $130 1.496” 5.59” C12 M7.3 J5.9 K,S4x20° A2U130-193436 C 20 2 pa $39 R20x2,M12x1.75x33oe6Øend/end
P38-143 $ 20 1.499” 5.63” 1:10:17 John Deere - U13484 Z 13 0 pa
CARBON TAPS
6 Pack; $ 98.00 / 6
P38G148 $ 54 1.499” 5.83” 1:13.5:25 1-5-69 John Deere - AT90342 Z 4Code:
0 pa
TL6-NPSFCB18 NO REC.ST.NIPPLE
P38-149 $ 30 1.499” 5.87” 1:13:12 John Deere - T34097 Z 3 0 pa 1295g
P38G163 $ 80 1.499” 6.42” 1:10:16 1-5-84 Case - D50187 D 1 0 pa 12CFR GR.E.IH1040 REC 2CFR OE
P38-164C $ 32 1.499” 6.47” 1:10:36 2C2.7:9.7 Case - D80739 Z 39 0 pa IH 1040
P38G165 $ 35 1.499” 6.50” 1:10:38 1-5-69 John Deere - T22438 Z 11 0 pa IH 1045 1040
P38G166C $ 60 1.499” 6.54” USE FOR:D126717 D126718,D37286,7 Z 16 0 pa C9,E142,G67,H ZERK,K9,C2=15

P38G178 $ 52 1.490” 0 pa
7.00” 1:10:89 19,159 - U42446
IH 1045 John Deere - AT90338 Z 16
P38G180C $ 60 1.499” 0 pa
7.09” D37287 Case - D167818 Z5
P38-191
P38G198C
$
$
56
50
1.498”
1.499”
10 pa $23
7.50”
0 pa
7.81”
1:14:19
2C3:11.4 1-5-99
Pg80A2U913 193008
AT86429 T40637
A 131
Z 14
Minimum $150
P38-203 $ 36 1.499” applies
0 pa before
8.00” GST
1:13:26 & Freight9.6CFRS John Deere - U15822 Z4
P38G214 $ 70 1.499” 5 Tools
pa $22
8.42” C=13,D=10.3,G=89
and Accessories
H=ZERK - MUSTANG Mustang Skid Steer C1
24C-26R-35C-55C-68L-105L-144R-149R-150R-154R-163R-192

may be used to make up
Minimum Wholesale Orders of $150
Prices subject to change without notice
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100
applies before GST & Freight Email: sales@kset.com.au Page 34 November 2013
Page 34 November 2013
Located in the Newcastle - Sydney Region - Australia
STEEL PINS INDUCTION HARDENED K1045 20C,26.5RL,38C,49L,101R,142R,147R,152R,157R192R

KSet Eng Price Diameter Length MANUFACTURE NOTES Stock JN30827

Part No.
Ex GST ORIGINAL PART CODES LOCATION GUIDES Usage
Cost $ 4,185
P38G221 $ 50 1.499” 8.70” 1:10:13 1-5-81 John Deere - T41972 Z6.8mm
9 0 Jobber
pa Drill Bit HSS NO REC.
P38G221G $ 73 1.490” 8.70” 5-139.5 John Deere - AT90334 ZTitanium
10 0 pa
Nitride Coated GR 10.5Wx27.7 12.3 FE
P38-229 $ 48 1.499” 9.00” 1:10:59 John Deere - U42445 Z 2 0 pa
P38-451 $ 65 1.499” 450mm Induction Hardened 40 mm Mild One End 135 D degrees
0 pa split point
4 .03kg,FITS INTO 5 kg AIRBAG
P38-601 $ 80 1.499” 600mm Induction Hardened 50 mm Mild One End B $ 166.00
1 paea $20plus GST
P38-1000 $ 96 1.499” 1metre K1045 h10 - Induction Hardened Full Length A 45 44 pa $28 Sold 57 in 2012
PG38-1000 $144 1.499” 1metre Precision Ground 4140 Induction Hardened CCode:
6 5TL-9LM068
pa $44

P40-137C $ 34 39.98mm 137mm 2C2.8:12 John Deere - T139951 Z 1 0 pa

P40-144C $ 35 39.98mm 144mm 2C2.8:12 John Deere - T125924 Z6 2Packo pa
P40-146C $ 36 39.97mm 146mm C7:14 John Deere - T100339 ZJobber
6 0 Drills
pa 22CFRx20°
P40-159MC $ 56 39.95mm 159mm C2.7:10 Case - 580K - E17663 Z $1025.00
0 /pa
6 23.75AF 3/8UNC
P40-160C $ 48 39.94mm 160mm C=10,E=140,M=3 Case - 580K - D140306 Z 1 0 pa Y=32Ø,W=13,K2 AT W=6x30°
Code:
P40G272 $106 39.96mm 272mm AT86426, 1:11:89 30,50 oe John Deere - T69365 Z TL6-9LM068
16 0 pa 2x37Ø GROOVE 90° NIP
P40-451 $ 72 39.97mm 450mm Induction Hardened 40 mm Mild One End D 0 pa 4.44kg,FITS INTO 5 kg AIRBAG
P40-601 $ 84 39.97mm 600mm Induction Hardened 50 mm Mild One End B 3 8 pa $23
P40-1000 $108 39.97mm 1metre K1045 h10 - Induction Hardened Full Length A Use 63 For
50 pa $32
PG40-1000 $146 39.98mm 1metre Precision Ground 4140 Induction Hardened C 8mm
10 10 x 1.25
pa Tap
$48

P44G62HT $120 1.749” 2.45”UH 1.25”UNFx32 John Deere - T29624 Z4 0 pa H=57AFx8,50.75Øx27.43 1-5-75 FTE
P44-127P $120 1.749” 5.16” 7 / 8 UNC x 38 Deep John Deere - AT41245 Z1 0 pa 8-33Q45-29x22 See Pg120
P44-131C $ 40 1.749” 5.16” 2C2.6:8 John Deere - T124495 Z3 0 pa 770B 772B
P44-134 $ 40 1.749” 5.28” 1:11:16 John Deere - T44314 Z9 0 pa 772B DRILL & T ½”UNC
P44G140C $ 70 1.749” 5.51” 2C3:11 1-5-70 Case - 455C - L78791 Z5 0 pa
P44-151 $ 43 1.749” 6.00” 1:13:14 K20 O.E. Tinks - Z4 0 pa

P44-152 $ 56 1.749” 6.00” 1:13:14 K20 S.E. Case - D135691 - 580K D 3 0 pa K=20x15° WITHOUT RING IH 1040
P44G175 $ 44 1.749” 6.88” 1:13:19 Thru 5-84 John Deere - AT86423 Z 3 0 pa
P44-186CP $ 50 1.749” 7.32” C2.8:11 P64x7:11 John Deere - AT135084 Z 5 0 pa 197 OAL Stabiliser Pin Top
P44G187T $110 1.743” 7.36” 5-48 BE 10°Tpr BE John Deere - T38082 Z 10 0 pa I/H 4140
P44-218C $ 36 1.749” 8.58” 2C3:11 3CFR Case - 580K - D52522 Z 28 0 pa IH 1045/40
P44-251 $ 90 1.737” 9.88” 1:13:18 ½”UNCx17SE John Deere - T41979 Z 15 0 pa

P44-254 $ 44 1.748” 10.00” 3CX-PIN-G 1019-2047 Z6 0 pa C20 D10.3 K,S10x25°

P44G260 $ 44 1.749” 10.24” 1:13:25 1-5-95 John Deere - AU13296 Z1 0 pa
P44-265 $ 44 1.748” 10.43” 3CX-PIN-E JCB - 811-50020 Z1 0 pa C50.5 D10.3 K,S10x25°
P44-289 $ 36 1.749” 11.38” 2:10:12.7 John Deere - T34485 Z2 0 pa 3345g
P44-305 $ 34 1.749” 12.00” 1:13:40 John Deere - CM20098 Z 22 0 pa IH 1040 3530g
P44-306 $ 34 1.749” 12.00” 2:11:20 JCB - DIP/LINK ARM Z 13 0 pa

P44-311 $ 40 1.749” 12.24” 1:10:19 8 ONLY TO CLEAR Z 5 0 pa

P44G321C $ 44 1.749” 12.64” 2C3:8.3 2-5-60BE Case - D55584 - 580K
Z 25 0 pa IH 1040
P44-323 $ 55 1.749” 12.72” 2:10:19 John Deere - AU13551
Z 7 0 pa 3820g
P44-323C $ 44 1.749” 12.72” 2C3:11 Case - D89838 580K
Z 6 0 pa IH 1040
P44-327 $ 48 1.748” 12.87” 3CX-PIN-EX - 811-80015
DTAP
3 0- High
pa Speed SteelC19$13.00
D10.3 K,S 10x25°
P44-339P $ 66 1.748” 13.35” F70 N6 W11 3CX-PIN-J,K - 911-12400
Z 1 0 pa C33 D10.3 K,S 18x25°
8mm x 1.25 Intermediate Plus GST
P44-356 $ 68 1.749” 14.00” 2:10:19 John Deere - AU13559 ZCode:
1 0TL-CMCHI080
pa
P44-394 $ 70 1.749” 15.50” T140880 - AU42333 John Deere - T125926 Z 20 0 pa K10x20° C21,D10.3,4650g
P44-601 $ 83 1.748” 600mm Induction Hardened 50 mm Mild One End D+18 0 pa
P44-1000 $120 1.748” 1metre K1045 h10 - Induction Hardened Full Length A 86+49Pack
30 pa $40
PG44-1000 $180 1.749” 1metre Precision Ground 4140 Induction Hardened CTAPS
7 4- HSS
pa $61 $ 66.00 / 6
P45-112P $ 74 44.95mm 112mm UH Yanmar - V1050-PIN-G 8mm
D 0x 1.25 Intermediate
pa PLATE=Q49
P45-134 $ 60 44.95mm 134mm 1:15:24 John Deere - T147990 Z 24Code:0TL6-CMCHI080
pa ORIGINAL:HARD CHROME
P45G135M $118 44.95mm 190mm 20T-70-71230 Komatsu - PC45-PIN-E D2 0 pa MARKS’ MOBILE WELDING
P45-144P $110 44.95mm 144mmUH Kobelco - SK045-PIN-G D 0 pa C15 D10.3 F52 N5 K8x25°
P45-152C $ 42 44.98mm 152mm 2C2.5:8 John Deere - T125937 Z 2 0 pa
P45-165C $ 46 44.94mm 165mm 2C2.7:12 John Deere - T100188 Z 7 0 pa GR:42.50

P45-177C $ 48 44.94mm 177mm 2C2.7:11 - T145346 John Deere - T100289 Z 15 0 pa

P45G190M
P45G200
$128
$ 66
44.95mm
44.88mm
190mm
200mm
20T-70-71180
1:11:42 1-5-100
Komatsu - PC45-PIN-D
Furukawa - 550901-12180 Z4 0 pa Minimum $150
D 1 0 pa MARKS’ MOBILE WELDING

P45-207M $ 70 44.95mm 207mm Milled Keeper Slot John Deere - T100306 Z 7 applies
0 pa before GST & Freight
P45-204TP $150 44.96mm 204mmUH M24x3 W33 K4 Yanmar - VIO 50-PIN-H D 0 Tools
pa PLATE=6-35U40-0,E=0,K=0
and Accessories
P45G204TP $180 44.96mm 204mmUH M24x3 W33 K4 G90 UH Yanmar - VIO 50-PIN-I D 0maypa PLATE=6-35U40-0,E=0,K=0
be used to make up
Minimum Wholesale Orders of $150
Prices subject to change without notice
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100
applies before GST & Freight Email: sales@kset.com.au Page 35 November 2013
Page 35 November 2013
Located in the Newcastle - Sydney Region - Australia
STEEL PINS INDUCTION HARDENED K1045 20C,26.5RL,38C,49L,101R,142R,147R,152R,157R192R

KSet Eng Price Diameter Length MANUFACTURE NOTES Stock at 31-10-2013

Part No.
Ex GST ORIGINAL PART CODES LOCATION GUIDES Usage
Cost $1,001
P45G227GP $ 198 44.95mm 227mm PY12B 010 09P1 Kobelco - SK045-PIN-H,I D 0 pa G48,143,C18D11,C6D6,F64N6 K3
P45G230GP $ 194 44.95mm 230mmUH Before S/N 1731 Komatsu - PC45-PIN-H,I 6.8mm Jobber Drill Bit HSS
D 0 pa
P45G234GP $ 194 44.95mm 234mmUH F75N6 56AF Komatsu - PC40,45-PIN-H,I D 0 pa
Titanium Nitride20T-70-71451
Coated G1=59 G2=173UH Pg109
PG45G234GP $ 220 44.95mm 234mmUH 20T-70-71451 Komatsu - PC45-PIN-HAM D 0 pa
P45G250C $ 74 44.92mm 250mm 2C2.7:12.5 5-38BE John Deere -T100189,AT86422 135 degrees
Z4 0 pa split point
P45G269P $ 175 44.95mm 269mmUH D10.3,C14,G119UH 6’oclk Yanmar - VIO 50-PIN-J,K $D 5.00 ea plus GST
0 pa K6,PL=U40
P45-290P $ 118 44.95mm 290mmUH Komatsu - PC45-PIN-J,K Z TL-9LM068
Code:
P45G290G $ 184 44.95mm 290mmOAL PY12B 01018P1 K,S=2x30° Kobelco - SK045-PIN-J,K Z 0 pa 74,169 C32D13 C9 D12 K43Øx20mm
P45-301 $ 68 44.95mm 300mm Induction Hardened 20 mm Mild One End B1 7 pa $16
6 Pack
P45G432 $ 120 44.96mm 432mm 1:13:28 78,328 John Deere - T75383 Z18 0 pa 2x11m OFFSET
P45-601 $ 90 44.95mm 600mm Induction Hardened 50 mm Mild One End Jobber
A 7 pa Drills
$26
P45-1000 $ 135 44.95mm 1metre K1045 h10 - Induction Hardened Full Length A21 32 pa
$ 24.00 / 6 $41
PG45-1000 $ 212 44.98mm 1metre Precision Ground 4140 Induction Hardened C3 2 pa $62
Code:
P50-104T $ POA 49.965mm 104.3mm High Tensile PIN, Taper Lock TL6-9LM068
D 0 pa
P50-114T $ POA 49.965mm 114mm High Tensile PIN, Taper Lock D2 0 pa PIN KIT=PDS 264 98 042 $206
P50-124T $ POA 49.965mm 124mm High Tensile PIN, Taper Lock D5 0 pa PIN KIT=PDS 264 38 771 $215
Use For
P50-140T $ POA 49.965mm 140mm High Tensile PIN, Taper Lock D1 0 pa PIN KIT=PDS 264 38 772 $224
P50-122P $ 90 49.96mm 122mmUH Yanmar - VIO 50-PIN-E 8mm
D 0x pa
1.25 Tap PLATE=Q49 K8

PG50G130M $ 98 Z 1 pa Made 17 Nov’10

P50G133 $ 76 49.45mm 133mm 1:13:17.5 1-5-69 John Deere - T127673 Z 14 0 pa 13mm OFFSET
P50-136 $ 40 49.96mm 135mm Induction Hardened 20 mm Mild One End Z 23 0 pa ROSIN
P50-140P $ 145 49.96mm 140mmUH Komatsu - WA380-PIN-S D 0 pa PLATE= X58
P50-147P $ 136 49.95mm 147mmUH Kobelco - SK045-PIN-E D 0 pa C17,D13,F53,N5,K8x20°,Pg116

P50-151 $ 46 49.96mm 150mm Induction Hardened 20 mm Mild One End Z1 0 pa ROSIN

P50-155P $ 92 49.95mm 155mmUH Yanmar - VIO 50-PIN-B,D D 0 pa P=Q49 K8
PG50-161P $ 150 49.91mm 161.5UH 6-37-Q40-15E15.5H46 A2U220-193397 D 0 pa New Plate=Q40
P50-165P $ 112 49.96mm 165mmUH WA180-PIN-L,K DW7 0 pa PLATE=X59
P50G165P $ 157 49.95mm 165mmUH G=86 UH Komatsu - WA180-PIN-J DW 0 pa 6mm PLATE, X59 F75 OAL=130

P50G175C $ 88 49.96mm 175mm Case - W14B-PIN-J Z 1 0 pa C13 M3 E149 G87 H ZERK K,S 3x30°
P50-183P $ 92 49.96mm 183mmUH Yanmar - VIO 50-PIN-C D 0 pa P=Q49 K
P50-185P $ 146 49.95mm 185mmUH Kobelco - SK045-PIN-C D 0 pa C17,D13,F53,N5
P50-192C $ 65 49.73mm 192mm 2C2.7:10 John Deere - T127437 Z 3 0 pa PP
P50-196M $ 106 49.95mm 196mm PC45-PIN-B Kom atsu - PC45-PIN-ST D 0 pa 20T-70-71160 C16.5,M10,J7,K4,S2

P50G196M $ 140 49.95mm 196mm Kom atsu - PC45-PIN-C D 0 pa

P50-199C $ 78 49.95mm 199mm 2C2.7:10 E179 580SK-PIN-GX,EX D 0 pa D141666 Y44.8,W13,J41.6,B2=158
P50G213P $ 182 49.95mm 213mmUH Kobelco - SK045-PIN-D D 0 pa C17,D13,F53,N5,G91 UH K8,Pg115
P50-216 $ 74 49.99mm 216mm C41 D19 John Deere - T127943 Z 10 0 pa
P50G227GP $ 184 49.95mm 227mmUH C9 D9 Kobelco - SK045-PIN-H,I D 6 0 pa G47,143 UH C24 D11,Pg116

P50-230P $ 125 49.96mm 230mmUH Yanmar - VIO 50-PIN-F D 1 0 pa P=Q49 K8

P50G233GP $ 242 49.95mm 233mmUH 14-40Y66-38x30 Kom atsu - PC40-PIN-F TAP
D 0- High
pa Speed Steel
20T-70-25650 $13.00
G1=64,G2=164UH K5x30°
P50-235P $ 132 49.95mm 235mmUH Kom atsu - PC45-PIN-F 8mm
D 0x pa
1.25 Intermediate MARKS Y58
Plus GST
P50-240C $ 124 49.92mm 240mm 2C3:10 E220 Case - 580SK-PIN-D,E,G D 0 pa D138022 Y44.9,W13.5,K=3,K2=6x30°
P50G260GP $ 177 49.95mm 258mmUH 1:14:15.3 68,187 D 0TL-CMCHI080
Kobelco - SK045-PIN-F Code: pa ROBSON=P50-283P

P50G267GP $ 182 49.96mm 267mmUH Kobelco - SK060-PIN-H,I D 0 pa C22D13,C8D8,G48,185UH,K12x20°

P50-275 $ 70 49.95mm 275mm Induction Hardened 20 mm Mild One End 6DPack
0 pa
P50G275GP $ 180 49.95mm 275mmUH Komatsu - PC50UU-PIN-J,K DTAPS
3 0-pa
HSS $ 66.00 / 6 F70Ø N7
C16,D12,G72,184UH
P50-279C $ 70 49.95mm 279mm 2C3:12.5 - T148743 John Deere - T106389 Z8mm
3 0x pa
1.25 Intermediate
P50-285P $ 190 49.95mm 285mmUH Kobelco - SK045-PIN-F D 0 pa C17 D13 F55 N5 K10x25°
Code: TL6-CMCHI080
P50-283 $ 74 49.95mm 283mm Induction Hardened 20 mm Mild One End D 0 pa
P50-286P $ 156 49.95mm 285mmUH 207-70-72250 Komatsu - PC60-7-PIN-I D 0 pa C14 D16 F75N8
P50G286GP $ 246 49.95mm 285mmUH 20X-70-24260 Komatsu - PC75-UU-2-PIN-I D 1 0 pa C14 D18 F75N8 G1=59,G2=183UH
P50-290C $ 92 49.93mm 290mm 2C3:10 E270 D138023 - 580SK-PIN-C D 0 pa J41.6 Y44.7 W13, Pg113
P50G306C $ 160 49.95mm 306mm 2C3:7.5 5-33BE D141142 - 580SK-PIN-H D 0 pa J41.3,Y44.4, W10,Pg1

P50-310P $ 192 49.95mm 310mmUH 201-70-64210 F75 N8 PC75-UU-PIN,J,K

P50-313C $ 66 49.45mm 313mm 2C2.3:12 John Deere - T135380
D 0 pa
Z 5 0 pa
Minimum $150
C15D16 ,Pg83
315
P50-320P $ 125 49.95mm 320mmUH Yanmar - VIO 50-PIN-A D applies
0 pa before GST & Freight P>Q49,K8
P50-330 $ 110 49.96mm 330mm Kobelco - SK060-PIN-J,K C 0 pa
Tools and AccessoriesC17 D18 K,S 3x30°
P50-335P $ 158 49.95mm 335mm PC40R-PIN-A Komatsu - PC45-PIN-A D 0 may
pa be used
MARKS’ toY58
make up 35x30
12-33Y53
20C,27R,37C,48L,65L,99L,140R,144R,157R,192R
Minimum Wholesale Orders of $150
Prices subject to change without notice
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100
applies before GST & Freight Email: sales@kset.com.au Page 36 November 2013
Page 36 November 2013
Located in the Newcastle - Sydney Region - Australia
STEEL PINS INDUCTION HARDENED K1045 20C,26.5RL,38C,49L,101R,142R,147R,152R,157R192R

KSet Eng Price Diameter Length MANUFACTURE NOTES Stock

Part No.
Ex GST ORIGINAL PART CODES LOCATION GUIDES Usage
Cost $15,046
8.5mm Jobber Drill Bit HSS
P50G335C $ 146 49.95mm 335mm 2C3:9 2-5-82 E176204 580K Titanium
D 0 Nitride
pa Coated ZERK B.E, RD BE
P50-351 $ 86 49.95mm 350mm Induction Hardened 30 mm Mild One End A 10degrees
135 10 pa split
$27point
P50-355 $ 158 49.95mm 355mm C14,D13,K3x30° SK045-PIN-A D 0 pa
$ 9.00 ea plus GST
P50G450GC $ 244 49.95mm 450mm C=10,E=430,G=70 B.E. D127445 D 0 pa One End:Y45,W10,K AT W5x30°
P50-601 $ 123 49.95mm 600mm Induction Hardened 50 mm Mild One End Code: TL-C9LM085
A 29 20 pa $33

PG50-950 $ 245 49.98mm 950mm Precision Ground 4140 Induction Hardened 2 1 pa $68
6 Pack
P50-1000 $ 168 49.97mm 1metre K1045 h10 - Induction Hardened Full Length A 66 74Drills
Jobber pa $49
P50-1150 $ 188 49.97mm 1150mm K1045 h10 - Induction Hardened Full Length $ 42.00 / 6 $56
D6 0 pa
PG50-1000 $ 258 49.98mm 1metre Precision Ground 4140 Induction Hardened B 26 8 pa $74
Code:
P51G114M $ 139 1.998” 4.53” Previously P51G115M 222 414 Stock is 4140 TL6-C9LM085
A 20 pa $41
PG51G115M $ 118 1.999” 4.53” Slot, Zerk same end A2U130-193380 4140 A 107 36 pa $41
PG51G121M $ 126 1.999” 4.76” ED10 Zerk same end A2U130-193336 4140 AUse
88For
48Tap
pa $38
PG51G127M $ 126 1.999” 5.00” Tap M11x15 Opp end A2U220-193388 4140 A 56 46 pa $43
P51-163H $ 330 John Deere Grader T150621 10mm
Z 4 x01.5pa

P51G186P-Cr $ 164 1.999” 7.32”UH Chrome Pin Z1 0 pa Anderson Ind

P51-198 $ 78 1.998” 7.80” 1:10.3:17 John Deere - T44315 C 2 pa
P51G200P $ 130 1.998” 7.88”UH K5x30° , G98 UH THRU 0902-10002 Dw1 0 pa VLI Juganaut Y47x5 P=Q60
P51G205 $ 198 1.998” 8.07” Milled Greaseways Bw 0 pa Mick Murray
P51G215P $ 134 1.998” 8.47”UH K5x30°, G98 UH THRU 0902-10023 Dw24 0 pa VLI Juganaut Y47x5 P=Q60

P51-219P $ 104 1.999” 8.62”UH K8x25 H1”UNF R30x22 CAT 936/926 BKT/LIFT C1 0 pa 4V2588 CE$53P=X105
P51G220M $ 160 1.997” 8.66” C16,M8,J12.7, 2-5-114 HRB 197 A 49 48 pa $55 Vik$321-Pg67
P51-236 $ 64 1.999” 9.29” 1:13.5:54 John Deere - T46715 Z1 0 pa
P51-225 $ 160 1.988” A2U912-193109 Z 0 pa
P51-255 $ 130 1.988” 10.04” 1:16:16 John Deere - T41977 Z 13 0 pa
P51-267P $ 99 1.998” 10.50” John Deere - AT64844 Z2 0 pa Plate=T51 860A

P51G381P $ 430 1.989” 15.00” 2-5-99,347 John Deere - AT57024 Z 15 0 pa P126x11

P51G402C $ 140 1.998” 15.81” 2C3.7:10 34,100 E172976, D91240 Z3 0 pa
P51-438P $ 130 1.997” 17.24”UH F70N6W15 911-12300, 3CX-PIN-A Z9 0 pa C21 D13.5 K10x25°
P51-601 $ 126 1.998” 600mm Induction Hardened 50 mm Mild One End C 19 3 pa $37 9.6kg
P51-1000 $ 170 1.999” 1metre K1045 h10 - Induction Hardened Full Length A 17 27 pa $53
PG51-1000 $ 232 1.999” 1metre Precision Ground 4140 Induction Hardened C 22 2 pa $96

P55G150P $ 149 54.97mm 150mmUH G75 UH@3clk, P=X58 WA 4 7 0 , 4 8 0 - P I N - S D1 0 pa 1/8” NPSF plate end 421-46-21760
P55-230 $ 96 54.99mm 230mm 1:17:59 John Deere - T142121 Z1 0 pa 315
PG55G241GM $ POA Precision Ground 4140 Induction Hardened Z1 0 pa W. McCulloch
P55-264 $ 86 54.99mm 263mm C74 D13 John Deere - T143647 Z1 0 pa 315

P55-345 $ 132 54.84mm 345mm 1:17:16 T125922, T79866 Z1 0 pa

P55-355 $ 187 54.98mm 335mm PY02B 01014P1 Kobelco - SK045-PIN-B Z 0 pa C14 D13, K3R, Pg115
PG55G370GM $ POA Precision Ground 4140 Induction Hardened Z2 0 pa W. McCulloch
P55-601 $ 166 54.93mm 600mm Induction Hardened 50 mm Mild One End B 13 9 pa $42 11.2kg
P55-1000 $ 211 54.93mm 1metre K1045 h10 - Induction Hardened Full Length A 35 10 pa $65 18.7 kg

P57-111HT $ 218 2.247” 4.38”UH 2”UNF John Deere - AT25333 Z 1 0 pa F70Øx51, 644 Loader,Pg49
P57G126W $ 114 2.248” 4.96”UH 1-5-54 UH E176361 580K(W) TAPZ - High
0 pa Speed Steel $21.00
Supplied withou plate
P57G126P $ 150 2.248” 4.96”UH 1-5-54 UH E176360 580K 10mm
Z x0 1.5 Intermediate 10T.D.
pa Plus 15x13:92
GST
P57G160M $ 191 2.248” 6.30” 1-6-89 Eimco - HRB305 DCode:
43 TL-CMCHI100
0 pa Pg70
P57G186M $ 198 2.248” 7.31” 1-6-79 Eimco - HRB306 D 46 0 pa

P57G200P $ 263 2.249” 7.87” 8Y-7028 - 980G-PIN-S 6 Pack

Z 0 pa P=X105 CE$124
P57-207C $ 115 2.248” 207mm Lift Cly /Con Block D11 TAPS
Z -0HSS
pa $ 94.00 / 6 J38.1 K,S 5x45°
C39 M14
P57-285C $ 178 2.249” 11.22” Lift Cyl/Blade K15 S5 9W2939 D11 BLADE Z x0 1.5
10mm pa Intermediate
C28.2,J37.7,M14.1 TAP 1.25”UNFx45,S.E.
P57-601 $ 168 2.248” 600mm Induction Hardened 50 mm Mild One End Code: D 7 TL6-CMCHI100
0 pa 12.1 kg
P57-1000 $ 219 2.248” 1metre K1045 h10 - Induction Hardened Full Length D 3 1 pa $72
20C,27R,37C,54C,66L,95L,140R,144R,157R,192R

Minimum $150
applies before GST & Freight
Tools and Accessories
may be used to make up
Minimum Wholesale Orders of $150
Prices subject to change without notice
Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100
applies before GST & Freight Email: sales@kset.com.au Page 37 November 2013
Page 37 November 2013
Located in the Newcastle - Sydney Region - Australia
STEEL PINS INDUCTION HARDENED K1045 20C,26.5RL,38C,49L,101R,142R,147R,152R,157R192R

KSet Eng Price Diameter Length MANUFACTURE NOTES Stock 31-10-2013

Part No.
Ex GST ORIGINAL PART CODES LOCATION GUIDES Usage
Cost $13,552
P60-159P $151 59.9mm 159mmUH C=13 D=13 H=65 N=3.4 Kobelco - SK045-PIN-SL Z 0 pa Pg116
P60-164P $140 59.92 164mmUH 6-40x60-36x30E30F90G60 Komatsu - WA500-3-PIN-S 10.2mm
D 0 pa Jobber Drill425-46-12120
Bit HSSTO S.No.2000
P60G164P $172 59.92 164mmUH 6-40x60-36x30E30F90G60 Komatsu -WA500-3-PIN-SG Titanium
D 0 pa Nitride Coated 425-46-12380 S.No.2001 on
P60-182 $139 59.9mm 182mm C=51 D=13 K=3R Kobelco - SK045-PIN-TD 135
Z degrees
0 pa split pointPg116
P60-287P $190 59.9mm 287mmUH C15,D18,F90,N9 PC60,75UU2-PIN-H D 0 pa 201-70-67220,207-70-64420,Pg83
$13.00 ea
P60-297 $110 59.9mm 297mm Induction Hardened 20 mm Mild One End D 0 pa plus GST
P60G333GP $270 59.9mm 333mmUH G75,210uhC33D17C12D12K16 Kobelco - SK220-PIN-H,I Code:
Z 0 TL-9LM102
pa
P60G349GP $330 59.9mm 349mmUH 1:17:36 F90N6K10 Komatsu - PC120-PIN-I D1 0 pa 202-70-64151 G80,G2=220uh,Zerk
P60-385P $204 59.9mm 385mmUH C35 D14 C12 D12 Kobelco - SK220-PIN-J,K D 0 pa F90 N10 K18x20°
P60-400 $205 59.9mm 400mmUH QUICK HITCH C20 D17 Komatsu - PC120-PIN-Q D 0 pa
6 Pack
P60-417P $260 59.9mm 417mmUH 203-70-44380 - F90N6K10 Komatsu - PC120-PIN-J,K Jobber
D 1 Drills
pa $ 58.00 / 6 C211,D212
C34D17
P60-426 $140 59.9mm 426mm Induction Hardened 20 mm Mild One End D 0 TL6-9LM102
Code: pa
P60-451 $148 59.9mm 450mm Induction Hardened 50 mm Mild One End B11 4 pa $34
P60-601 $179 59.9mm 600mm Induction Hardened 50 mm Mild One End A 14 pa $43 13.3kg
P60-1000 $230 59.9mm 1metre K1045 h10 - Induction Hardened Full Length A32 28 pa $65 2.2kg
Use For
PG60-651 $260 59.99mm 650mm 4140 Induction Hardened 50 mm Mild One End C x0 1.75
M12 pa
Tap
PG60-1000 $358 59.99mm 1metre Precision Ground 4140 Induction Hardened C4 6 pa $175
PG60-1130 $398 59.99mm 1130mm Precision Ground 4140 Induction Hardened C1 0 pa $198
PG60-1200 $418 59.99mm 1120mm Precision Ground 4140 Induction Hardened C1 0 pa $210

P63-143H $340 2.481” 5.63” H=101.1Øx33 35DEEP John Deere - U42130 Z1 0 pa 2x5/8UNC BB,35Deep33.5pcd
P63-149 $ 60 2.498” 5.87” 1:13.5:20 John Deere - T77413 Z6 0 pa
P63G168 $ 94 2.499” 6.65” C21 D17 G73 H25 TESK Z5 0 pa GrindDownForP63G169
P63G184 $190 2.499” 7.25” C14 D13.5 G88 OffSetZerk A2U130-193437 was222 403 A 8 pa $42 5/8 UNCx36 R26x3 Vik$287
P63G185 $190 2.499” 7.28” A2U130-193338 222 403 use P63G184 A46 30 pa $42 ZerkOffsetPg90

P63-198 $126 2.498” 7.78” 1:17.5:51 Eimco - HRB321 Z4 0 pa 3mm CFR,Pg80

P63G203M $128 2.498” 8.00” *Check Length 1-6-89* A2U913-193010 Z2 0 pa M11 13C24 OppZerk
P63G227 $ 90 2.500” 8.94” 1:13:44 1-5-113 John Deere - AT78638 Z2 0 pa ½”UNx5”6*B/Nut 5100g
P63G231 $180 2.499” 9.09” 1:20:34 1-5-119 E48845 580K Z 0 pa NoRecess½”UNCx15DeepPg1
P63G240M $215 2.498” 9.45” A2U913-193010-Z C12 pa $35 M11J13C24 OppZerk

P63-275P $155 2.499” 10.28”UH CAT - 7V6715 966G,972GH-PIN-J Z1 0 pa CE$89 P=12-39X102-44x30

P63G286 $220 2.497” 11.26” 1:18:38 1-6-89 6440 0498 HRB320 A18 4 pa $45
P63G305 $218 2.498” 12.00” C16,D14.3,G140Thru 222 404 A2U130-193438 / 193337 B60 10 pa $48 Svik$299
P63G308 $250 2.498” 12.13” 1:27:26,1:14.3:61,1-5-124 222 482 K44x15° PG94 Z 0 pa $53
P63G308G $250 2.498” 12.13” 1:14.3:61 K44x15° Eimco - A2U130-193435 A85 60 pa $49 Svik$351

P63G314 $244 2.498” 12.36” C14.3 D14.3 G140 THRU Eimco - A2U220-193420 A33 24 pa $52
P63-318 $192 2.498” 12.52” 1:14.3:17.5 Eimco - 226 289 A32 30 pa $44 Pg88
P63G327 $226 2.498” 12.87” C17 D14 G150 A2U220-193446 A41 22 pa $52 OE:3/4 UNCx50 Cbore25X3
P63-601 $190 2.498” 600mm Induction Hardened 50 mm Mild One End B 7 pa $46 15 kg
P63-801 $220 2.498” 800mm Induction Hardened 50 mm Mild One End C1 6 pa $58 20 kg

P63-1000 $258 2.498” 1metre K1045 h10 - Induction Hardened Full Length A7 28 pa $71 24.9 kg
PG63-1000 $392 2.499” 1metre Precision Ground 4140 Induction Hardened C4 9 pa $130
PG63-1200 $470 2.499” 1200mm Precision Ground 4140 Induction Hardened D 1 pa $148

P65-148P $196 64.9mm 148mmUH 202-70-52121 Komatsu - PC120-PIN-G D 0 pa K2, 16-41Y69-36x37

P65G160P $168 64.95mm 157mmUH Komatsu - 418-70-11921 WA200, 250-PIN-L,K Z 0 pa Plate:X80 K$167
P65-172P $168 64.9mm 172mmUH Komatsu 1-5-87 WA200-PIN-L,K D 0- High
TAP pa Steel35:80$31.00
Speed 19TD
P65G176P $202 64.95mm 176mm Komatsu - 418-70-11910 WA250-PIN-J D 0 pa Plate:X80
12mm x 1.75 Intermediate Plus GST
P65G181P $202 64.9mm 181mmUH Komatsu - 416-70-11910 WA120,180,200-PIN-J Z 0 TL-CMCHI120
Code: pa Plate:X80
P65G347GP $410 64.93mm 347mmUH 202-70-64161, F90N6K7 Komatsu - PC120-PIN-H C 3 pa C36 D17 G80,230 UH
P65-355 $150 64.94mm 355mm Induction Hardened 20 mm Mild One End D 0 pa UseForP65G347GP
P65-401 $150 64.94mm 400mm Induction Hardened 40 mm Mild One End B4 4 pa $35
6 Pack
P65-601 $200 64.94mm 600mm Induction Hardened 50 mm Mild One End B13TAPS
10 - HSS
pa $47 $15.6 140.00
kg
/6
P65-651 $215 64.94mm 650mm Induction Hardened 50 mm Mild One End C1510mm1 x pa
1.75$50
Intermediate
P65-1000 $260 64.94mm 1metre K1045 h10 - Induction Hardened Full Length A18 13 TL6-CMCHI120
Code: pa $73
PG65-1000 $400 64.98mm 1metre Precision Ground 4140 Induction Hardened C1 2 pa $120

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 38 November
38 November 2013
2013
Located in the Newcastle - Sydney Region - Australia
STEEL PINS INDUCTION HARDENED K1045 20C,26.5RL,38C,49L,101R,142R,147R,152R,157R192R

KSet Eng Price Diameter Length MANUFACTURE NOTES Stock

Part No.
Ex GST ORIGINAL PART CODES LOCATION GUIDES Usage
Cost $9,245
P69-186P $152 2.749” 7.31”UH CAT926 BKT/LIFT Z2 0 pa $74 V3619 CE$74,Pl:X106DL
P69-292P $388 2.749” 11.50”UH 114-1153 CAT980G-PIN-J Z 0 pa Plate:F240 CE$198
P69-601 $224 2.748” 600mm Induction Hardened 50 mm Mild One End D6 1 pa $96
P69-801 $269 2.748” 800mm Induction Hardened 50 mm Mild One End C8 0 pa $104
P69-1000 $325 2.748” 1m K1045 h10 - Induction Hardened Full Length C 12 8 pa $146
PG69-801 $360 2.749” 800mm Induction Hardened 4140 Except for 50 mm Z3 0 pa $191
PG69-1000 $420 2.749” 1m Induction Hardened 4140 Reeled to h9 Z 13 0 pa $205 CHECK DIA

P70G92P $158 69.9mm 92mm 105752A1 2-5-43 Case - D140093 580K Z2 0 pa 8-49Q100-35x33 K5x20°
P70G102P $166 69.9mm 102mmUH P=Q100 Case - 580SE-PIN-A Z 0 pa Centre Mount
P70G117W $134 69.9mm 117mmUH WITHOUT CAM PLATE D140657 580K Z1 0 pa Centre Mount-TU G65 W65x5
P70G129C $178 69.9mm 129mmUH C10E109Y65W13 580SL-PIN-TU D2 0 pa StepEnd:H=1/8”N.S. G62 Thru
P70G130P $164 69.9mm 130mmUH 1-5-65 E176201 580K Z 0 pa P=Q100, G=60

P70-131 $146 69.9mm 131mm PY02B 01025D1 Kobelco - SK045-PIN-TL Z 0 pa C15.2 D13.3 K3R
P70-137 $150 69.9mm 137mm Kobelco - SK045-PIN-TU Z 0 pa C15 D13.3 K3R
P70G147CW $176 69.9mm 147mmUH E48847 Without Plate Case - 580SK-PIN-TU D 2 pa G72M2.3 Y65 W11 J62 SeeSample
P70G153C $166 69.9mm 152mm M2.7 D151065 580K Case - 580SL-PIN-TL Z 0 pa C10,E132,G76Thru,Csk9,Y65W10
P70-156C $112 69.9mm 156mm 2C2.7:5.2 K,S=1.5 Case - 580SK-PIN-B Z 0 pa 112294A1 J66.2Ø E145.6 Pg113

P70-156P $184 69.9mm 156mmUH Komatsu - 203-46-56260 PC120-PIN-B D 1 pa TapM16 PlEnd K1 16-46Y71-36x37
P70-157P $180 69.9mm 157mmUH Komatsu - 418-70-11941 WA180-PIN-E Z2 0 pa $39 PLATE=X80 K$176
P70-158P $250 69.9mm 158mmUH John Deere - AT167601 Z1 0 pa Pg121
P70G158P $220 69.9mm 158mmUH Komatsu - 203-70-61320 PC120-PIN-D D 0 pa K3G79uhNoZerk 16-46Y71-36x37Pg76
P70G161C $166 69.9mm 161mm E141,C10,Y65,W13 Case - 139262A1 590-TU Z4 0 pa H=1/8”NS,Opp Step,G80 Thru

P70G168C $199 69.9mm 168mm 2C2.6:9.5 G88 THRU Case - E48844 580K D 1 pa ZerkInStepEnd 65°x12Csk,x9
P70G175C $190 69.9mm 175OAL M2.7,G87 THRU,H8 Case - 175597 A1 Z 0 pa Y65,W12.7,M2.4,E155 590 TL
P70G175P $240 69.9mm 175mmUH Komatsu - 203-70-42121 PC120-PIN-E D 0 pa 16-46Y71-36x37 G87UH
P70-190P $218 69.9mm 190mmUH Komatsu - 205-70-71210 PC200-PIN-B,G K9x25° C 7 pa $60 20-58Y84 2M12:180O
P70-208 $110 69.9mm 208mm Induction Hardened 20 mm Mild One End C 4 pa $50

P70G225HM $POA 69.94 225mmUH HIGH TENSILE Milled Head PIN C4 4 pa $365 PDS 207 90 608 $916.80
P70-327P $302 69.9mm 327mmUH Komatsu - 418-70-11961 WA180-PIN-F Z 0 pa Plate:X80 K$264
P70-355P $318 69.9mm 346mmUH Komatsu - 202-70-61210 PC120-PIN-F D 0 pa 16-46Y71-36x37 K5
P70-373 $160 69.9mm 373mm Induction Hardened 50 mm Mild One End C4 3 pa $70 ForP70-355P
P70-412P $330 69.9mm 412mm 205-70-73160 - F100 N6 PC200-PIN-H,I B2 8 pa $155 C40 D22 C12 D12 P=100x10

PG70-413P $520 69.99 412mmUH I/H 4140 PC200-PIN-HAM C 3 pa

P70-425 $170 69.9mm 600mm Induction Hardened 20 mm Mild One End C5 0 pa $77
P70G446GP $480 69.9mm 446mmUH F86 N25 Y68X33 Kobelco - SK220-PIN-I Z 0 pa G77uh,G2=125 OffsetOE,C21 D17
P70-601 $220 69.9mm 600mm Induction Hardened 50 mm Mild One End A22 16 pa $98 18.1 kg
P70-656 $418 69.9mm 656mm Komatsu - 202-70-61180 PC120-PIN-C C 0 pa E618,C19,D17

P70-660P $480 69.9mm 660mmUH Komatsu - 202-70-61160 PC120-PIN-A Z 0 pa 16-46Y71-36x37

P70-675 $250 69.9mm 675mm Induction Hardened 20 mm Mild One End C4 0 pa $108
P70-801 $270 69.9mm 800mm Induction Hardened 50 mm Mild One End C11 1 pa $124 24.1 kg
P70-1000 $325 69.9mm 1m K1045 h10 - Induction Hardened Full Length B21 8 pa $148 30.2 kg
PG70-1000 $489 69.99 1m Precision Ground 4140 Induction Hardened C5 4 pa $216

P71-455 $340 70.97 455mm Induction Hardened Suits EX120, Dusan D 1 pa

P71-715 $530 70.97 715mm Induction Hardened Suits Z AXIS 120 D 0 pa
P71-860 $586 70.97 860mm Induction Hardened Suits HITACHI Z 0 pa

P75G165P $235 74.9mm 165mmUH Komatsu - 419-70-11971 WA320-PIN-C Z 0 pa PLATE=X82

P75-193P $100 74.9mm 193mmUH 1-5-95 USE FOR P75G193P Z1 0 pa
P75-200P $244 74.9mm 193mmUH Link WA300, 320-PIN-L,K C 3 pa 19TD35:80
P75G205P $270 74.9mm 201mmUH Bucket WA300, 320-PIN-J C 6 pa G=106, 19TD35:80
P75-215 $120 74.9mm 215mm Induction Hardened 20 mm Mild One End C6 2 pa $38
P75G260P $310 74.9mm 260mmUH Komatsu - 419-70-11981 WA320-PIN-B D 0 pa PLATE=X82

P75G334GP $446 74.9mm 335mmUH 154-78-14182,154-78-14191 D85A Ripper D4 0 pa $190 G95,G2:238uh Y200 2xZerks
P75-601 $250 74.9mm 600mm 20.8kgs H.T. FOR 550mm C7 1 pa $116
P75-751 $306 74.9mm 750mm H.T. FOR 700mm B2 6 pa $132
P75-801 $310 74.9mm 800mm H.T. FOR 750mm C9 0 pa $141
P75-1000 $359 74.9mm 1m K1045 h10 - Induction Hardened Full Length A17 8 pa $175
PG75-1000 $524 74.99 1m Precision Ground 4140 Induction Hardened C1 1 pa $253

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 39 November
39 November 2013
2013
Located in the Newcastle - Sydney Region - Australia
STEEL PINS INDUCTION HARDENED K1045 20L,32L,48L,,65L,102L,142R,147R,152R,157R192R

KSet Eng PRICE DIA. LENGTH MANUFACTURE NOTES Stock 30-10-2013 JN30919
PART No.
EX GST ORIGINAL PART CODES AND LOCATION GUIDES Usage
Cost $23,502
P76-125H $298 2.996” 4.93” H89x63 Eimco - HRB322 Z8 0 pa $150 3x7/8”x14x53DP:41pcdPg80
P76-159HT $530 2.982” 6.25” 2”AF John Deere - T43809 Z4 0 pa
Hacksaw Blades $ 12.00 / 6 pack
H111x54 1.5”UNF
P76G185P $258 2.998” 7.28UH 4E3196 - G88 UH - CAT962G 966G, 972GH-PIN-C PackZof 0Sixpa P=12-50X95-40x30 DCT$167
plus GST
P76-189 $100 2.999” 7.46” 1:13.5:20 John Deere - T27123 Z5 0 pa 1541F 6650g
P76-192 $116 2.996” 7.56” Induction Hardened 20 mm Mild One End 8% Cobalt
Z 0 pa 18 tpi
$79
Code:TL6-300-18U
P76G192M $230 2.996” 7.56” C29 J16 M14.2 ZERK OPP END HRB316, 64400496 C3 1 pa IHC$45,pg67
P76G203 $240 2.990” 8.01” 2-8-103 IH4140 John Deere - T34374 Z2 0 pa 31TPR D&T 1”UNCBE6250g
P76G211 $280 2.983” 8.31” 1:20:32 5-117SE John Deere - T43808 Z6 0 pa 1/8NPT O/S 6950g
P76-222P $210 2.999” 8.75”UH 4T0203 - K5x15o D11-PIN-E D1 0 pa 5/8uncPlateEnd 20-28Y205-40x50-20
P76-229P $280 2.998” 9.00”UH 1V-8954 980GPIN-L Z 0 pa Pl:X114 CE$102

P76G235P $280 2.999” 9.25”UH BUCKET LIFT & LINK Case - 610 & 710 Z 0 pa G100 UH Pl:U117
P76G240 $220 3.000” 9.50” HOLLOW PIN A2U913-193123 B7 6 pa $86 IHC$40pg100
P76-241P $320 2.998” 9.50”UH 130-2621 980GPIN-K Z1 0 pa $182 Pl:X114 CE$182
P76G263G $240 2.999” 10.35” 1:20:25 CTR T77500 Reliefx65mm Z1 0 pa
P76-267 $210 2.998” 10.51” 1:16.5:51 Eimco - 222 402 C13 1 pa $80 IHC$35pg92 ¾”UNCx32 SE

P76-268 $268 2.998” 10.52” B7 9 pa $95 IHC$50hollow8D,Cbore25x3

P76-272P $260 2.999” 10.71”UH 5J1204 - K8x15o Eimco - D11-PIN-F D1 0 pa 20-69Y200-60x50-30
P76G280M $292 2.998” 11.00” 2-8-148 Eimco - EA8003 C12 1 pa $91 IHC$45Svik$267
P76-290 $170 2.998” 11.42” Eimco - A2U913-193195 C
P76G337P $280 2.997” 13.26”UH 138-6685 G=158uh CAT966G, 972GH-PIN-B Z1 0 pa 12-50X110-60x40 CE$175

P76G391M $330 2.997” 15.39” 2-8-106 2-8-82 Eimco - HRB317 C9 2 pa $114 IHC$48 C30 M14.2 J16pg67
P76-391 $188 2.997” 15.39” Induction Hardened 40 mm Mild One End Z 0 pa
P76-601 $256 2.997” 600mm Induction Hardened 50 mm Mild One End B4 6 pa $104 21.5kg
PG76-601 $370 2.999” 600mm Induction Hardened 4140 Except for 50 mm Z 0 pa
P76-801 $310 2.997” 800mm Induction Hardened 50 mm Mild One End C8 3 pa $141

P76-1000 $370 2.998” 1m K1045 h10 - Induction Hardened Full Length A13 15 pa $170
PG76-1000 $549 2.999” 1m Precision Ground 4140 Induction Hardened Z 0 pa
P76-1100HT $496 2.998” 1200mm Induction Hardened 4140 Reeled to h9 Tolerance D1 0 pa $193
P76-1200HT $538 2.998” 1200mm Induction Hardened 4140 Reeled to h9 Tolerance C9 0 pa $212
PG76-1150 $620 2.999” 1150mm Precision Ground 4140 Induction Hardened Z2 0 pa $288
P80G100P $208 79.9mm 100mmUH CASE - 590-PIN-A 175596A1 K6 Z 0 pa G45uhThruZerkPlate:Q100
P80-195P $278 79.9mm 195mmUH 2 0 5 - 7 0 - 6 5 7 5 0 K8x25° PC220-PIN-B D 8 pa TapPlate2xM12 20-60Y90-50x40
P80-202P $264 79.9mm 202mmUH 205-70-71320 K15 PC220-PIN-G Z 0 pa 20-55Y85-33x39
P80-213 $142 79.9mm 213mm Induction Hardened 20 mm Mild One End D7 8 pa $44
P80-218P $264 79.9mm 218mmUH SUB FOR PC200-PIN-D,E P C 2 2 0 - P I N - D, E , G C 4 pa 206-70-51170=P80-222P PY85
P80-236 $154 79.9mm 236mm Induction Hardened 20 mm Mild One End D5 1 pa $46

P80-413P $360 79.9mm 413mmUH 206-70-53140 Komatsu - PC220-PIN-H B13 10 pa $131 C40 D22 C12 D12 F110N12 K20x25°
PG80-414P $580 79.98 414mmUH IH4140 FOR HAMMER PC220-PIN-HAM C4 1 pa $182 206-70-71320 C40 D22 C12 D12
P80-423 $228 79.9mm 423mm SOFT ENDS:57mm,15mm FOR P80-413P Z 0 pa
P80G450GP $550 79.9mm 450mm F86 N25 SK220-PIN-H Z 0 pa C26,D17,G93UH,G2:144oppEndOffset
PG80-488P $490 79.98 488mmUH IH4140 FOR HAMMER SK250-PIN-HAM D1 0 pa
P80-500 $276 79.9mm 500mm Hardened Quick Hitch PC200, 220-PIN-Q B4 13 pa $143 C30, D22, K,S 5X30°

P80-502P $480 79.9mm 502mmUH LC12B0106P1 SK330-PIN-I D1 0 pa

P80-513P $408 79.9mm 513mmUH 205-70-73270 PC200,220-PIN-J,K A13 15 pa $150 C43 D22 F100N10 C13D12
P80-523 $258 79.9mm 523mm SOFT ENDS:57mm,15mm FOR P80-513P C D 0 pa
P80-561 $340 79.9mm 561mm 087-5805 CAT320-PIN-J B5 3 pa $153 C19 D20 K,S 8x30°
P80-601 $286 79.9mm 600mm Induction Hardened 50 mm Mild One End A32 58 pa $124
P80-651 $318 79.9mm 650mm Induction Hardened 50 mm Mild One End A10 8 pa $132

PG80-651 $435 79.98 600mm Induction Hardened 4140 Except for 50 mm C 5 pa

P80-701 $350 79.9mm 700mm Induction Hardened 50 mm Mild One End C 1 pa
P80-798 $492 79.9mm 798mm 206-70-51190 PC200,220-PIN-C D3 0 pa $231 C28 D22 E742 K,S 9x20°
P80-801 $370 79.9mm 800mm Induction Hardened 50 mm Mild One End A13 10 pa $156
P80-1000 $438 79.9mm 1metre K1045 h10 - Induction Hardened Full Length A28 56 pa $180

PG80-801 $560 79.98 800mm Induction Hardened 4140 Except for 50 mm C3 3 pa $226
PG80-1000 $678 79.99 1metre Precision Ground 4140 Induction Hardened D3 0 pa $273 +1 @ 955 mm long $650
PG80-1150 $768 79.99 1metre Precision Ground 4140 Induction Hardened D1 0 pa $307
P80-1050 $468 79.9mm 1050mm K1045 h10 - Induction Hardened Full Length B15 8 pa $195
PG80-1200 $790 79.99 1200mm Precision Ground 4140 Induction Hardened C 4 pa $317

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 40 November
40 November 2013
2013
Located in the Newcastle - Sydney Region - Australia
STEEL PINS INDUCTION HARDENED K1045 20C,26.5RL,38C,49L,101R,142R,147R,152R,157R192R

KSet Eng Price Diameter Length MANUFACTURE NOTES Stock 31-10-13 JN30918
Part No.
Ex GST ORIGINAL PART CODES LOCATION GUIDES Usage
Cost $28,782
P83-197P $220 3.249” 197mmUH K9x15 M40x2 Plate end 5V1882 - CAT950F-PIN-K D 0 pa CE$90 12-51X114-40x30 E30 F100 G58
P83-230P $220 3.249” 230mmUH K8x15 M40x2 Plate end 5V1508 - CAT950F-PIN-L D 0 pa CE$76 10-49X111-32 E30 F100 G70
SportsPro
P83G387 $465 3.248” 387mm A2U936-193224 Eimco - 0811 790 C 2 pa
P83-601 $294 3.248” 600mm Induction Hardened 50 mm Mild One End MULTI KNIFE
C3 0 pa $135 $ 22.00 ea
Locking Blade
PG83-601 $490 3.248” 600mm Ground 4140 Induction Hardened DSerrated
2 0 pa
Edge for
PG83-640 $490 3.248” 640mm Precision Ground 4140 Induction Hardened DRESCUE
8 0 pa CUTS ASM MistakeFree Material
PG83-650 $550 3.248” 650mm Precision Ground 4140 Induction Hardened D 2 0 pa for Purcells
P83-1000 $488 3.247” 1metre K1045 h10 - Induction Hardened Full Length CWith
7 Nylon Sports Holster
2 pa $202 42 kg
P83-1150 $546 3.247” 1150mm K1045 h10 - Induction Hardened Full Length DCode: TL-3035
4 0 pa 48.4 kg

P85-230P $216 84.9mm 230mmUH 424-70-11922,424-70-11720 WA380/420-PIN-L,K 6B 2 pa $87
SportsPro P=X90
P85G230P $276 84.9mm 230mmUH 424-70-11910 WA350 WA380/420-PIN-J CPack;
2 pa $87 CheckPinsGreaseable?
P85-240 $157 84.93mm 240mm Induction Hardened MULTI
20 mm Mild One End B10 KIVES
4 pa $73 $ 98.00 / 6
P85G260P $345 84.93mm 260mmUH WA320-PIN-A Z 0 TL6-3035
Code: pa G=130uh P:X82
P85-270 $180 84.93mm 270mm Induction Hardened 15 mm Mild One End D 4 2 pa
P85-601 $302 84.93mm 600mm Induction Hardened 50 mm Mild One End C7 4 pa $141
P85-801 $380 84.93mm 800mm Induction Hardened 50 mm Mild One End C5 0 pa
P85-1000 $460 84.93mm 1metre K1045 h10 - Induction Hardened Full Length B4 2 pa $215 44.5kg
P89G222TP $598 3.498” 8.74”UH OAL 279.5mm 242 352 A19 14 pa $192 HT$43MchFr90D$60
P89-210T $368 3.498” 8.29”UH K43.3 B.E. CAT 980GII CAT-980G-PIN-D 115-7048 Z 0 pa

P89-239P $260 3.498” 9.41”UH 9J2290 - K5x15o D11-PIN-D D1 0 pa 20-69Y200-60x50-30

P89-241P $250 3.498” 9.49”UH 966G,972GH-PIN-E,L,K CAT 980G-PIN-E 4V7099 Z 0 0 pa 12-51X115-40x30 CE$119
P89G260G $430 3.495” 10.26” G1=130,G2=180 Thru A2U936-193247, C26.4D21 D 6 0 pa Svik$516
P89G312G $382 3.497” 12.28” Zerk,G=143,OE:C16 D17.5 A2U130-193327, 222 401 A18 8 pa $127 HT$35 Svik$859 PG92HT$50
P89G326 $370 3.497” 12.84” Drill6,CSK15@36,163,290 A2U130-193333, 193210 A13 48 pa $128 HT$37 Svik $1077Pg102

P89G334P $320 3.497” 13.15”UH 138-6679 - G186 H8oppEnd 966G, 972GH-PIN-D Z1 0 pa 12-54X112-51x41 CE$203
P89G337P $320 3.497” 13.29”UH 138-6674 - G178oppEnd CAT966G, 972GH-PIN-A C1 0 pa 12-50X113-52x42 CE$203
P89G338 $294 2.498” 13.31” C15.5 D18.3 G158 10w Gr A2U220-193445 B5 10 pa $125
P89-350P $320 3.500” 13.78”UH K7x15o 3.502” Dia 9J6691 - D11-PIN-B D1 0 pa 20-75Y197-64x54-32
P89-375C $336 3.497” 14.76” PUSH ARM/BLADE x4 9J2364 - D11 Z 0 pa C36 M14 J67 OptTap30ØseK9S3

PG89-450 $365 3.498” 450mm Precision Ground 4140 Induction Hardened D1 0 pa

PG89-530 $425 3.498” 530mm Precision Ground 4140 Induction Hardened D1 0 pa
P89-541 $492 3.498” 21.28” C70 D16.4 26.4kg ED10 A2U130-193434, 222 400 A8 2 pa $212 HT$58,Svik$578
P89-542 $400 3.497” 21.34” Eimco - 222 400 A2U130-193329 C 3 pa C70 D16.4 26.4kg Svik$1320
P89-601 $358 3.497” 600mm Induction Hardened 50 mm Mild One End D3 0 pa
P89-801 $450 3.497” 800mm Induction Hardened 50 mm Mild One End D1 0 pa
P89-1000 $540 3.498” 1metre K1045 h10 - Induction Hardened Full Length D3 1 pa $230
P89-1060 $594 3.498” 1060mm K1045 h10 - Induction Hardened Full Length C 2 pa $249
PG89-1100 $775 3.498” 1000mm Precision Ground 4140 Induction Hardened C 1 pa
P90-236P $280 89.9mm 236mmUH 207-70-51210,207-70-32160 PC300-PIN-B,G C 4 pa $75 Pin-B:Y86,Pin-G:Y87 K12
P90-254 $198 89.92mm 254mm Induction Hardened 20 mm Mild One End C8 5 pa $61
P90-480P $478 89.9mm 480mmUH 205-70-65680 PC200,220-PIN-F C 3 pa $151
P90-498 $308 89.9mm 498mm Induction Hardened 30 mm Mild One End C8 4 pa $129
P90-500P $510 89.9mm 500mmUH Kobelco SK220-PIN-J,K Z 0 pa C27 D18 F95 N34
P90-502P $480 89.9mm 506mmUH LC12B0102P Kobelco - SK330-PIN-H D1 0 pa
P90-506P $475 89.9mm 502mmUH LQ12B01439P1 SK250-PIN-J,K D1 0 pa
P90-508 $380 89.9mm 508mm Kobelco SK220-PIN-Q Z 0 pa C28 D18
P90-510P $430 89.9mm 510mmUH 207-70-33140 F110N16 PC300-PIN-H,I B9 12 pa $169 K25x15° C45D26C12D14
PG90-511P $680 89.9mm 510mmUH IH4140 FOR HAMMER PC300-PIN-HAM B7 2 pa $226 C45D26F110N6C12D14K25
P90-540P $475 89.9mm 540mmUH 7Y3547 - 325B - 322L CAT322,325 330-PIN-J B1 0 pa
P90-555 $360 89.9mm 555mm Induction Hardened PC300-Quick Hitch Pin D 0 pa C30, D26, K,S 5X30°
KNIFE BLADES $ 5.00 ea
P90-570P $460 89.9mm 570mmUH 207-70-61230, 207-70-33130 PC300,350-PIN-J,K (Suits
B 8 14 pa $182 C45D26F110N16C13D14K20
P90-578P $528 89.9mm 578mmUH EX350-LR-PIN-F Z Knives:
0 pa TL-112-1, TL-115Y, TL-3035)
C25D21F95N10K9 Longreach
P90-601 $368 89.9mm 600mm Induction Hardened Dispenser of 10
50 mm Mild One End A 35 32 pa $150
P90-620P $540 89.9mm 620mmUH LC12B01217P1 SK330-PIN-J,K D1 0TL-921-4D
Code: pa $163
P90-651 $398 89.9mm 650mm Induction Hardened 50 mm Mild One End B 21 18 pa $149
P90-801 $460 89.93mm 800mm Induction Hardened 50 mm Mild One End B 16 6 pa $189
PG90-801 $640 89.99mm 800mm Precision Ground 4140 Induction Hardened 6CPack;
3 2Knife
pa $268
Blades $ 18.00 / 6
P90-810P $630 89.9mm 810mmUH PC220-2,200-PIN-A 6xDDispensers
0 pa $220
of 10
P90-830 $475 89.9mm 830mm Induction Hardened 30 mm Mild One End C 2 0 pa $196
P90-1000 $550 89.9mm 1metre K1045 h10 - Induction Hardened Full Length ACode: TL6-921-4D
27 30 pa $231 50 kg
PG90-1000 $790 89.99mm 1metre Precision Ground 4140 Induction Hardened D 5 2 pa $328
PG90-1200 $920 89.99mm 1200mm Precision Ground 4140 Induction Hardened D 3 0 pa $386

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 41 November
41 November 2013
2013
Located in the Newcastle - Sydney Region - Australia
STEEL PINS INDUCTION HARDENED K1045 20C,26.5RL,38C,49L,101R,142R,147R,152R,157R192R

KSet Eng Price Diameter Length MANUFACTURE NOTES Stock

Part No.
Ex GST ORIGINAL PART CODES LOCATION GUIDES Usage
Cost $15,183
P95G180P $410 94.92 180mmUH Komatsu - 419-70-11950 WA320-PIN-D D 0 pa G90 uh K8x20° PX91
P95G205P $420 94.9mm 205mmUH Komatsu - 424-70-11972 WA420-3-PIN-CD 0 pa $ 3.00
CUTTER ea
G102 O.E P=X92
P95-208P $375 94.92 208mmUH Komatsu - 419-70-11941 WA320-PIN-E D 0 pa
Auto-Lock K=8x20° P=X91
P95-218 $218 94.9mm 218mm Induction Hardened 10 mm Mild One End
D 0 pa
P95G258P $438 94.9mm 258mmUH Komatsu - 421-70-11410 Yellow
WA450, 470-1-PIN-J
D Plastic
0 pa G130uhP=X91
Code: TL-905-1
P95-259P $404 94.9mm 259mmUH Komatsu - 421-70-21910 WA450, 470-3-PIN-J B 2 pa
P95-270 $250 94.9mm 270mm Induction Hardened 20 mm Mild One End C8 2 pa $95
P95G276P $440 94.9mm 275mmUH 424-70-21980, 11981 WA420-3-PIN-B 6C Pack
0 pa $104 P=X91
P95G279P $415 94.9mm 279mmUH Komatsu, 1-8-137: 180°PL 385-1001-8732 Z 0 pa
CUTTERS $W120
14.0012-56X90-35
/6 G100 H85
P95-287 $260 94.9mm 287mm Induction Hardened 10 mm Mild One End D3 2 pa
Code: TL6-905-1
P95-288P $426 94.9mm 288mmUH Komatsu - 421-70-11922 WA450, 470-PIN-L,K B 7 pa $90 K$338 2006
P95-299 $270 94.9mm 287mm Induction Hardened 10 mm Mild One End D 12 0 pa
P95G300P $460 94.9mm 300mmUH Komatsu - 424-70-11880 WA420-3-PIN-A C 2 pa $121 P=X91
P95-311 $288 94.92 311mmUH Induction Hardened 10 mm Mild One End D 2 0 pa $107
P95-388P $470 94.92 388mmUH Komatsu - 419-70-11960 WA320-PIN-F D 0 pa K=10x20° P=X91

P95-601 $420 94.9mm 600mm Induction Hardened 50 mm Mild One End C 1 0 pa

P95-801 $510 94.9mm 800mm Induction Hardened 50 mm Mild One End C 2 pa $249
P95-1000 $627 94.92 1metre K1045 h10 - Induction Hardened Full Length D 1 2 pa 55.6 kg

P100G161P $330 99.93 161mmUH Komatsu - 20T-70-71541 PC45-PIN-TU D1 0 pa 3clk pg85

PG100G165Mw $497 99.93 180mm LWH-069-105B D1 0 pa Longwall haul
P100-180M $220 99.93 180mm Komatsu - 20T-70-71551 PC45-PIN-TL D1 0 pa TapM16 C25M15J15pg85
P100-240P $410 99.9mm 240mmUH 207-70-31190, 30090 PC300-PIN-D,E D 0 pa K15x20° 20-65Y87-25x40
P100-256 $280 99.92 256mm Induction Hardened 20 mm Mild One End B3 0 pa
P100-270P $436 99.9mm 270mmUH 208-70-31210,61210 PC400, 450-PIN-B C 4 pa $109 18-80Y108-24x38 pg78
P100-275 $290 99.92 275mm Induction Hardened 20 mm Mild One End C2 0 pa
P100-286 $300 99.92 286mm Induction Hardened 20 mm Mild One End C1 0 pa
P100-310P $440 99.9mm 310mmUH Komatsu - 207-70-61191 PC300-6-PIN-D D 0 pa
P100-328 $310 99.92 312mm Induction Hardened 20 mm Mild One End C 1 pa $97
P100G370G $685 99.82 370mm 503147 FBL10-PIN-J C12 0 pa Coalroc
P100-553P $720 99.9mm 553mmUH 208-70-33140 F120N12 PC400,450-PIN-H,I B 6 12 pa $170 C48D26C14D14 K18pg78
PG100-554P $1060 99.9mm 553mmUH IH4140 FOR HAMMER PC400,450-PIN-HAM D 2 0 pa 208-70-33140
P100-601 $490 99.9mm 600mm Induction Hardened 50 mm Mild One End A13 13 pa $187 37 kg
P100-615P $756 99.9mm 615mmUH 208-70-33130 F120N12 PC400,450-PIN-J,K B8 14 pa $188 C47D25C12D10K18pg78

P100-651 $525 99.9mm 650mm Induction Hardened 50 mm Mild One End C13 1 pa $180 40 kg
P100-800P $798 99.9mm 796mmUH Komatsu - 206-70-55270 PC220-PIN-A C 1 pa $264 20-65Y120-42x56 H96 K10x20°
P100-801 $608 99.9mm 800mm Induction Hardened 50 mm Mild One End A 10 24 pa $242
P100-818 $620 99.9mm 818mm Induction Hardened 30 mm Mild One End B 9 3 pa $261
P100-940 $790 99.9mm 940mm Komatsu - 207-70-31172 PC300,350-PIN-C C 2 pa $362 C33 D26 E874 K10
P100-1000 $740 99.9mm 1metre K1045 h10 - Induction Hardened Full Length C 6 5 pa $316 61.7 kg

PG100-651 $760 99.96 650mm Induction Hardened 4140 Except for 50 mm C4 0 pa $290
PG100-800 $870 99.96 800mm Precision Ground 4140 Induction Hardened C4 1 pa $335
PG100-1000 $1080 99.96 1metre Precision Ground 4140 Induction Hardened C6 4 pa $402
PG100-1090 $1180 99.96 1090mm Precision Ground 4140 Induction Hardened D1 1 pa
P102G229 $588 3.998” 229mm 913-500003 6480 2959 D8 0 pa $242 JN0920 Mtl$ +GME$175
P102G240TP $580 3.998” 240mmUH Nut=A2U-196134 - ED10 A2U220-193387 C2 2 pa $196
P102-250C $310 3.996” 250mm Tilt Cyl / Push Arm D11 - 9J2366 D 0 pa M13.5C36J67K6S3 Opt:Tap30ØSE
P102-325C $350 3.996” 325mm Tilt Cyl / Blade x2 D11 - 9J2593 D 0 pa M13.5C36J67K6S3 Opt:Tap30ØSE
P102-420M $775 3.996” 420mm BE:Slot30x22Deep 5/8UNCx25 238 040 Z 0 pa No lance hole

P102-421M $875 3.996” 420mm BE:Slot30x22Deep 5/8UNCx25 A2U130-193431was 238 040 C 5 4 pa $329 Drill 8.5 end to end
P102-440C $410 3.997” 440mm Push Arm / Con Block D11 - 130-3434 D 0 pa C40 M18 J78.8 K,S 5x45°
P102-762 $560 3.997” 762mm K1045 h10 - Induction Hardened Full Length C 5 2 pa $262
Minimum $150
P.W.G. KINGS
P102-900 $630 3.997” 900mm K1045 h10 - Induction Hardened Full Length D 1 0 pa
P102-1000 $695 3.997” 1metre K1045 h10 - Induction Hardened Full Length D 5applies
0 pa
before GST & Freight 63.7 kg

P108-232P $POA 4.249” 232mmUH 1V8957 Z 0 pa

P108-391P $528 4.249” 391mmUH CAT 980G-PIN-B Z 0 Tools
pa and Accessories
Plate=X114 CE$250
may be used to make up
Minimum Wholesale Orders of $150
All prices subject to change without notice

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 42 November
42 November 2013
2013
Located in the Newcastle - Sydney Region - Australia
STEEL PINS INDUCTION HARDENED K1045 20C,26.5RL,38C,49L,101R,142R,147R,152R,157R192R

KSet Eng Price Diameter Length MANUFACTURE NOTES Stock 31-10-2013

Part No.
Ex GST ORIGINAL PART CODES LOCATION GUIDES Usage
Cost $4,887
P110G229P $640 109.9mm 229mmUH Komatsu - 421-70-11970 WA450, 470-PIN-C C 1 pa $140 P=X119
P110-235P $495 109.9mm 235mmUH Komatsu - 424-70-11940 WA420-PIN-E C 0 pa $140 P=X119
P110-240 $300 109.9mm 240mm Induction Hardened 20 mm Mild One End CPLIERS
4 2 pa $130 $ 28.00 ea
P110G240P $568 109.9mm 240mmUH Komatsu - 424-70-11960 WA380, 420-PIN-D D mm
250 0 pa
0.39 kg plus GST P=X119
P110-245P $460 109.9mm 245mmUH 8069305 EX350-PIN-B D 0 pa 16-65Q150-46 K8
Self Adjusting,
P110-250 $360 109.9mm 250mm Induction Hardened 20 mm Mild One End DChrome
6 1 paVanadium
$133
P110-270P $475 109.9mm 270mmUH 208-70-61220, 31190 PC400-PIN-E C 1 TL-ADJP
Code: pa $142 20-67Y96-28x38
P110G283P $780 109.9mm 283mmUH 425-70-11310,11320 WA500-1-PIN-J D 0 pa pg 115 Jims
P110-287 $335 109.9mm 287mm Induction Hardened 20 mm Mild One End D 1 1 pa $136
P110-295P $575 109.9mm 295mmUH Komatsu - 425-70-11920 WA500-PIN-L,K C 6 pa $146 10-70X120 P=X119
6 Pack;
P110G299P $710 109.9mm 299mmUH Komatsu - 421-70-31950 WA480-5-PIN-A DPLIERS
1 0 pa $ 134.00 / 6 P=Q120
P110G300P $620 109.9mm 300mmUH Komatsu - 425-70-11720 WA500-PIN-J D 0 pa
250mm 2.31 kg K8 G150 UH 3clk X119
P110G301P $710 109.9mm 300mmUH Komatsu - 421-70-11980 WA450, 470-PIN-B C 2 pa $146 P=X119
P110-305 $320 109.9mm 305mm Induction Hardened 12 mm Mild One End Code:
C 6 paTL6-ADJP
$146
P110-307P $485 109.9mm 307mmUH 3079492 EX350-PIN-D,E D 0 pa C21D21Y109W35TapM24 OE F130N16
P110-310 $330 109.9mm 300mm Induction Hardened 12 mm Mild One End C 20 3 pa $132
P110G310P $710 109.9mm 299mmUH Komatsu - 421-70-31950 WA470-7-PIN-A G150uh Z 0 pa B100C120E35F1502xM12
P110G340P $735 109.9mm 340mmUH Komatsu - 421-70-11950 WA450, 470-PIN-A D 0 pa P=X119
P110-330P $520 109.9mm 330mmUH Komatsu - 208-70-61191 PC400-PIN-D C 3 pa $160 20-67Y96-28x38
P110-351 $385 109.9mm 350mm Induction Hardened 20 mm Mild One End C 3 2 pa $146
P110G380P $220 109.9mm 380mmUH 1 ONLY Z 1 0 pa Mistake P=X119
P110-401 $360 109.9mm 400mm Induction Hardened 20 mm Mild One End D 0 pa
P110-522P $588 109.9mm 522mmUH Komatsu - 207-70-31180 PC300-PIN-F C 1 pa $236 20-68Y127 44x60 K12x20°
P110-541 $530 109.9mm 540mm Induction Hardened 23 mm Mild One End C1 2 pa $194 40.4kg
P110-582P $890 109.9mm 582mmUH Komatsu - 21M-70-11171 PC600-6-PIN-H,I D 0 pa
P110-591P $840 109.9mm 591mmUH 8069307 P=Q150 EX350-PIN-F C3 0 pa TapEnd3xM20 50deep60Pcd
P110-651 $616 109.9mm 650mm Induction Hardened 60 mm Mild One End B 10 pa $234 44.8kg
P110-800 $746 109.9mm 800mm K1045 h10 - Induction Hardened Full Length B3 11 pa $280 59.8kg
P110-952 $902 109.9mm 952mm EX350-PIN-C D 0 pa C21 D21 E910 K10
P110-978 $810 109.9mm 979mm Induction Hardened 54mm Mild Each End D 0 pa
P110-986 $960 109.9mm 985mm Komatsu - 208-70-31172 PC400-PIN-C C1 1 pa $380 C34 D26 E918 K15 73 kg
P110-995P $880 109.9mm 995mmUH Komatsu - 207-70-31160 PC300-PIN-A C 3 pa $372 H=M30x50 K15 20-68Y127-44x58
P110-999P $880 109.9mm 999mmUH 8069273 K9 EX350-PIN-A D 0 pa $332 H=M24 16-65U144-46 E30
P110-1013 $920 109.9mm 1013mm Induction Hardened 20 mm Mild One End B 2 8 pa $370 75.2 kg
P110-1030 $940 109.9mm 1030mm To Make CAT-330-PIN-C C 3 1 pa $380ExtraCost: 3xM16x2@70pcdBothEnds
P114-340 $380 4.497” 340mm 1 Only D1 0 pa Mistake
P114-350P $550 4.498” 350mmUH Drawbar/Toobar K6x15o D11-PIN-A 9J3226 D1 0 pa 20-65Y205-40x50-20 38unfx85
P114-370P $610 4.497” 370mmUH Drawbar/Mainfame D11 RIPPER D1 0 pa P=X203
P114-390 $445 4.497” 390mm Induction Hardened 40 mm Mild One End D2 0 pa
P114-390P $610 4.498” 390mmUH 1V-8947 CAT 980G-PIN-A D 0 pa P= X128 CE$291
P114-475 $540 4.497” 475mm Induction Hardened 40 mm Mild One End D 0 pa
P114-700 $800 4.497” 700mm Induction Hardened 40 mm Mild One End D1 0 pa 1 @ 720 mm long

P115-641P $1260 114.9 mm 641mmUH Komatsu - 21M-70-11260 PC600-6-PIN-K C 4 pa $332

P115-651 $655 114.9 mm 650mm Induction Hardened 60 mm Mild One End C 1 3 pa $300 To Discontinue
P115-662 $750 114.9 mm 662mm K1045 h10 - Induction Hardened Full Length D 7 0 pa $302
P115-740P $1340 114.9 mm 740mmUH Komatsu - 21M-70-11160 PC600-6-PIN-J C 1 pa $374
P115-762 $860 114.9 mm 752mm K1045 h10 - Induction Hardened Full Length C 6 0 pa $345
P115-1060 $1040 114.9 mm 1060mm Induction Hardened 60 mm Mild One End C 1 1 pa $462

Wear Life of Pin Materials

An Interesting Fact !
4140 Hardened & Tempered 29 Rockwell C
as available from steel merchants

K1045 - INDUCTION HARDENED 58 Rockwell C

58 Rockwell C (615 Brinell) resists wear about 10 times better and longer than 29 Rockwell C

4140 - INDUCTION HARDENED 58 Rockwell C - Very Resistant to Breakage

58 Rockwell C (615 Brinell) resists wear about 12 times better and longer than 29 Rockwell C

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 43 November
43 November 2013
2013
Located in the Newcastle - Sydney Region - Australia
STEEL PINS INDUCTION HARDENED K1045 20C,26.5RL,38C,49L,101R,142R,147R,152R,157R192R

KSet Eng Price Diameter Length MANUFACTURE NOTES Stock 31-10-2013

Part No.
Ex GST ORIGINAL PART CODES LOCATION GUIDES Usage
Cost $6,414
P120-250P $534 119.9mm 250mmUH Komatsu - 421-70-21960 WA470-PIN-DD 1 pa WA450-3-PIN-D P=X120
P120G258P $604 119.9mm 258mmUH Komatsu - 425-70-11770 WA500-PIN-C
D 2 1 pa $168 G130 UH 3clk X120
P120-259P $534 119.9mm 259mmUH Komatsu - 421-70-11940 WA470-PIN-EC 4 pa $ 32.00
SCISSORS ea
WA450-3-PIN-E
P120-270 $378 119.9mm 270mm Induction Hardened 20 mm Mild One End
C 220mm
9 0 pa $168 Plus GST 0
P120-293P $548 119.9mm 304mmUH Komatsu - 425-70-31970 WA500-6-PIN-C
D 2 pa K10x15 P=X119 9clk
Black Panther
P120G304P $580 119.9mm 304mmUH Komatsu - 425-70-11950 WA500-PIN-D,E C Code:
1 4 pa $180
TL-29-810 G190 UH 10:30clk X120
P120-314 $405 119.9mm 314mm Induction Hardened 20 mm Mild One End C 6 0 pa $180
P120G330P $785 119.9mm 330mmUH Komatsu - 425-70-31929 WA500-6-PIN-L,K D 2 pa P=X120
P120-353P $610 119.9mm 353mmUH Komatsu - 425-70-31830 WA500-6-PIN-J 6D Pack
2 pa P=X120
P120G370P $820 119.9mm 370mmUH Komatsu - 425-70-11780 WA500-PIN-B SCISSORS
D 0 pa $ 148.00
G190/ 6UH 3clk X121
Code: TL6-29-810
P120G371P $686 119.9mm 370mmUH Komatsu - 425-70-11790 WA500-PIN-A D 0 pa ZerkOppPlate G180 3clk, X121
P120-381 $450 119.9mm 380mm Induction Hardened 12mm Mild One End C 14 2 pa $200
P120-390P $624 119.9mm 390mmUH Komatsu - 424-70-11950 WA380, 420-PIN-F C 3 pa P=X120
P120-401 $468 119.9mm 400mm Induction Hardened 12mm Mild One End D 8 0 pa $208
P120-570P $790 119.9mm 570mmUH 208-70-31180, 31181 PC400, 450-PIN-F D 1 pa K16 20-72Y130-60x60

P120-590 $650 119.9mm 570mm K1045 h10 - Induction Hardened Full Length D 1 pa $288
P120-651 $778 119.9mm 650mm Induction Hardened 50mm Mild One End C3 0 pa $346 Dusan DX480TitanQHitch
P120-801 $890 119.9mm 800mm Induction Hardened 50mm Mild One End C 6 2 pa $370 71.1kg
P120-996P $1240 119.9mm 996mmUH Komatsu - 208-70-31161 PC400-PIN-A K16 D 1 pa 20-72Y130-60x60 H:M30x60 P.E.
P120-1014 $1080 119.9mm 1016mm K1045 h10 - Induction Hardened Full Length C9 5 pa $460 90.2kg
P120-1100 $1280 119.9mm 1100mm 4140 h9 - Induction Hardened Full Length D 1 0 pa $660 Check Diameter! 97.2kg
P125G254P $815 124.9mm 254mmUH Komatsu -426-70-11970 WA600-PIN-C C 1 0 pa $218 P=X120, G=122 Zerk O.E
P125G334P $865 124.9mm 254mmUH 425-70-31940 K10x150 WA500-6-PIN-D,E C 1 2 pa $218 PX119 12clk G168 OppEnd NoZerk
P125G338P $870 124.9mm 338mmUH 4 2 6 - 7 0 - 1 1 2 1 1 , 11221 WA600-1-PIN-J D 0 pa P=Y119 pg117 Jims
P125G341P $960 124.9mm 341mmUH Komatsu -426-853-1110 WA600-3-PIN-J D 4 pa G=162 UH P=Y119 pg117 Jims
P125-355 $520 124.85 355mm K1045 h10 - Induction Hardened Full Length C 5 0 pa $218 34.2 kg
P125-389P $880 124.9mm 389mmUH Komatsu -421-70-11961 WA470-PIN-F D 2 pa $267 WA450-3-PIN-F P=X121

P125-459P $880 124.9mm 459mmUH Komatsu -421-70-31960 WA480-5-PIN-F C 3 2 pa $267 P=X120

P125-475 $630 124.85 875mm K1045 h10 - Induction Hardened Full Length C 9 0 pa $267 1 @ 508mm ! 45.6 kg
P125-1000 $1140 124.85 1000mm K1045 h10 - Induction Hardened Full Length C2 0 pa $508 96.4 kg
P125-1100 $1196 124.85 1100mm K1045 h10 - Induction Hardened Full Length C1 0 pa $533 106 kg

P127-255P $534 4.999” 10.0”UH 1V8439 - 15-65X127-60x52 CAT 980G-PIN-F D 0 pa E48F130G75 CE$254
P127-354P $596 4.999” 14.0”UH 4V7101 CAT 966G-PIN-F D 0 pa 15-66X125-60x54 CE$282
P127-365 $430 4.999” 14.37” Induction Hardened 20 mm Mild One End D 0 pa
P130-800 $1070 129.9mm 800mm K1045 h10 - Induction Hardened Full Length D 0 pa
P130-1000 $1100 129.9mm 1000mm K1045 h10 - Induction Hardened Full Length C2 5 pa $440 Cat375:977Uh,1046 OAL,7Y3585

P140G312P $980 139.9mm 312mmUH Komatsu - 426-70-11950 WA600-PIN-D D2 1 pa $210 G=155 ZerkOppEnd P=X130
P140G342P $980 139.9mm 342mmUH Komatsu - 426-70-11941 WA600-PIN-E D1 1 pa $216 G=173uh P=X130
P140-343P $980 139.9mm 343mmUH Komatsu - 426-70-11920 WA600-PIN-L C 2 pa $216 P=X130
P140-351P $980 139.9mm 351mmUH Komatsu - 426-70-11361 WA600-3-PIN-K C 3 pa $220 P=Y122
P140G357P $950 139.9mm 357mmUH Komatsu - 426-70-11360 WA600-1-PIN-K D 0 pa G=167uhP=Y122
P140G424P $1020 139.9mm 424mmUH Komatsu - 426-70-11980 WA600-PIN-B D 0 pa G=213zerkOppEnd P=X130

P140G425P $980 139.9mm 424mmUH Komatsu - 426-70-11990 WA600-PIN-A C 0 pa G=213uhP=X130

P140-455P $994 139.9mm 455mmUH 425-70-11960, 11961 Komatsu -WA500-PIN-F C 2 pa $242 +Plate+Assy 12-100X130 55x45
P140-845W $1380 139.9mm 845mm Without t ag PC1200-PIN-K D1 0 pa $489 103 kg
P140-965 $1540 139.9mm 965mm Floating Pin PC1250-PIN-J D 1 pa $550 117 kg
P140-1014 $1610 139.9mm 1014mm K1045 h10 - Induction Hardened Full Length C2 1 pa $568 123 kg

P160G549P $2700 159.9mm 600mmUH Komatsu - 425-70-31960 WA500-6-PIN-F D 0 pa P=X160

P160G600P $2800 159.9mm 600mmUH Komatsu - 426-70-11961 WA600-PIN-F D 0 pa
Wear Life of Pin Materials
An Interesting Fact !
4140 Hardened & Tempered 29 Rockwell C
as available from steel merchants

K1045 - INDUCTION HARDENED 58 Rockwell C

58 Rockwell C (615 Brinell) resists wear about 10 times better and longer than 29 Rockwell C

4140 - INDUCTION HARDENED 58 Rockwell C - Very Resistant to Breakage

58 Rockwell C (615 Brinell) resists wear about 12 times better and longer than 29 Rockwell C

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 44 November
44 November 2013
2013
Located in the Newcastle - Sydney Region - Australia
 Weld-on End Plates - Pin Retainers

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320

Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 45 November 2013
Located in the Newcastle - Sydney Region - Australia
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 46 November 2013
 Weld-on End Plates - Pin Retainers

Stock Usage at 31-10-2013

CODE Price Pin Hole Dia Cost $1,516
6 - 24 T30.5 - 13 $9 E14 F68 G14 H28 Z 6 0pa
6 - 46 M35 - 11 $10 E11 F65 G11 H48 J10 Z 15 0pa
8 - 30 Q35 - 12 $12 E12 - - H36 B 28 10pa $4 JUGANAUT
6 - 49 M37.5 - $11 $10 E11 F75 G11 H58 J10 Z 18 0pa
6 - 35 U40 - 0 $14 E0 - K70 H43 C 42 0pa YANMAR V1050 H,I,J,K
6 - 35 T39 - 13 $9 E15 F90 G15 H48 Z 6 0pa 6-40 T42.5 -13 $10 E15 F90 G15 H58 Z16
6 - 35 Q43 - 14 $15 E18 - - H50 D 12 6pa $3 C=44
6 - 34 Q44 - 27x21 $17 E26 - G26 H30 B 8 0pa JD LASER-CUT
9 - 24 V44 $10 E8 H37 Z 4 0pa MICK MURRAY
6 - 33 Q45 - 29x22 $10 E25 - G25 H48 C 1 0pa $3
6 -22.5 X45 - 14 $10 E22.5 F45 H23 C 8 20pa $3 BYRNECUT
8 - 42 Q49 - 0 $10 E15 - G15 H50 Z 4 0pa
6 - 33 Q50 - 27x23 $19 E21 - G21 H44 B 29 6pa $4 YANMAR V1050 A,B,C,D,E,F,G
16 - 38 N51 - 33 $24 E26 F76 H55 Z 2 0pa 8-29 V52 - 25x16 $10 Z4
10 - 40 Q57 - 30x26 $13 E28 - G28 H53 C 2 pa
10 - 28 X57 - 32x27 $22 E25 F76 G50 H45 B 6 8pa $5 LASER
6 - 41 X58 - 35x30 $26 E30 F75 G50 H46 129 B 20 8pa $3 C=60 WA470,480-PIN-S, WA380-3-PIN-S
12 - 40 Y58 - 34x30 $28 E17 H46 B 17 4pa $9
6 - 36 X59 - 36x30 $26 E30 F75 G50 H45 B 29 12pa $6 WA180-3 L,K,J
6 - 40 X60 - 36x30 $30 E30 F90 G60 H55 A 7 20pa $6 WA500-PIN-S
6 - 33 Q60 - 14 $12 E15 - - H48 C 62 4pa $3 JUGANAUT LASER ’07 $4 BATCH 100
16 - 46 Y69 - 38x38 $25 E19 L38 W38 H61 134 C 20 2pa $10 PC120-G ’07 PLASMA COST $8
8 - 44 Q70 - 21x13 $16 E19 - G19 H63 D 12 0pa $5
16 - 46 Y71 - 38x38 $23 E19 L38 W38 H66 136 B 20 0pa PC120-A,B,D,E,F ’07 PLASMA COST $8
12 - 36 Y78 - 32x29 $18 E16 H55 C 2 0pa N.W.LASER ’06 $7 BATCH 20
8 - 40 Q80 - 16 $30 E20 G20 H45 C+24 16pa $16 P50G369GP Salmon Buckets
8 - 50 X80 - 48x40 $40 E42 F100 G95 H63 C 23 2pa $5 WA180-PIN-E,F,L
10 - 53 X81 - 42x32 $34 E38 F100 G95 H66 C 18 0pa C=80mm
10 - 50 X82 - 44x40 $34 E40 F100 G95 H72 B 26 4pa $10 WA320 PIN A,B,C,L,K,J C=80mm
16 - 62 Y81 - 38x38 $18 E19 L38 W38 H95 Z 3 0pa 12 - 40 Y83 - 30x30 $30 H40 Z2
8 - 35 V83 - 24x16 $15 E12 J8 K48 H46 D 2 0pa 8-56 Q85-21x13 $18 E22 G22 H82 Z3
20 - 56 Y84 - 46x38 $32 E23 L46 W38 H66 160 B 30 8pa $14 PC200-PIN-B,G +2 OK
12 - 55 U85 - 50x40 $30 E45 I=20 J20 H67 K80 D 8 2pa $11 Salmon Buckets
20 - 55 Y85 - 34x40 $34 E17 L34 W40 H76 160 B 26 8pa $15 PC220-D,E,G. PC200 +4 OK
20 - 66 Y86 - 26x40 $34 E13 L26 W40 H86 163 C 32 Minimum $150
3pa $15 PC300-B M12x2 +6 OK
20 - 60 Y87 - 25x40 $34 E13 L25 W40 H86 160 applies
C 29 3pa $15 before GST & Freight
PC300-G
20 - 65 Y88 - 25x40 $34 E13 L25 W40 H96 166 C 31 4pa $17 PC300-D,E +3 OK
12 - 44 V89 - 50x30 $39 E25 L50 W30 H48 I=15,J8 D 7 4pa $9 Tools
AT162992,AT162996
and AccessoriesPG120
12 - 85 X89 - 48x40 $24 F125 H80 200 Z 8 0pa may20-60 Y89 -34x38 $28 E17
be used to make up L32 W38 H76 Z4
20 - 60 Y90 - 50x40 $36* E25 L50 W40 H76 175 B 18 0pa PC220-PIN-B M12x2 *TAPPED,ADD $25
Minimum Wholesale Orders of $150
10 - 35 Q90 - 22x16 $22 E25 - G25 H46 D 21 0pa
All prices subject to change without notice
12 - 68 X90 - 48x40 $34 E42 L48 W40 H81 200 A 34 16pa $10 WA420,380 PIN L,K,J
10 - 42 Q91 - 22x16 $30 E24 - - H56 155 C 20 16pa $10 Also Q92 x 2 - Cost $11 Details in MYOB
20 - 60 Y91 - 40x40 $36 E20 L40 W40 H86 170 C 15 2pa $13 PC200-PIN-A
12 - 68 N91 - 48x40 $20 E42 L48 W40 H91 Z 30 0pa 12-37 N90 - 31 $16 E37 J8 F80 H44 Z3
12 - 68 X91 - 48x40 $34 E42 L48 W40 H91 200 B 29 16pa $13 WA420,380 PIN A,B,C WA470 PIN L,K,J
12 - 61 X92 - 44x40 $34 E38 F125 G100 H91 190 C 7 USE FOR X91 WA320 PIN D,E,F
12 - 50 X95 - 40x30 $30 E38 F100 G80 H70 C 11 1pa $9 CAT 962G, 966G PIN-C
20 - 67 Y96 - 28x38 $36 E14 L28 W38 H106 177 C 10 2pa $15 PC400-D,E
8 - 41 Q97 - 13 $22 E22 G22 H46 Z 5 0pa PC75-PIN-J,K BLANFAIR ONLY
16 - 45 N100 - 16 $26 E26 F90 J15 H49 Z 3 0pa 20-70 Y101 52x52 Cost $28 Mistake Z20
8 - 49 Q100 - 35x33 $28 E25 - G25 H66 D 16 0pa 580K-PIN-A, 580SE-PIN-A
12 - 65 Q101 - 48x40 $34 E44 L48 M40 H75 D 2 4pa $13 Salmon Buckets
20 - 60 Y100 - 0 $32 E25 L50 W40 H86 185 C 20 2pa $17 PC220-F PC200-F +1 OK
12 - 39 X102 - 44x30 $30 E42 F80 G80 H55 183 C 8 0pa Dogleg Plate CAT 966G, 972GH PIN-J
18 - 60 Y103 - 35x65 $48 E18 H85 181 C 1 0pa PC228US-3-PIN-A
10 - 38 X105 - 40x30 $25 E42 F80 G80 H46 183 C 11 0pa CAT 926,PIN-K 4V2588 4V3617
12 - 95 Y105 - 80x100 $30 E40 L80 W100 H136 Z 11 0pa Q105 Cost $13 Details in MYOB Z4
10 - 38 X107 - 40x30 $30 E36 F80 G80 H55 183 C 0pa Dogleg Plate CAT 926,PIN-J 4V3619
18 - 80 Y108 - 24x38 $38* E12 L24 W38 H96 200 C 14 1pa $23 PC400-B M16x2 *TAPPED,ADD $25
16 - 50 N110 - 0 $28 E20 F101 - H67 Z 3 0pa 12-65 N111 - 43 $28 E30 F125 H90 Z4
RULE: No two line items are to have the same code. When two plates have the same “C” dimension,

KSet EngineeringthePty
plate with the larger “H” dimension will be given the higher alpha numeric code. e.g: Y85,Y87,Y88
Ltd 33 Johnson Street Maitland NSW 2320
KSet Engineering Pty
Phone 02 4932 3530 Fax: Ltd 02 334932
Johnson
3100 Street
Email:Maitland NSW 2320 Page 47 Office
sales@kset.com.au November Copy
2013
Phone 02 4932
Located in the3530 Fax: 02
Newcastle 4932 3100
- Sydney RegionEmail: sales@kset.com.au
- Australia Page 47 November 2013
 Weld-on End Plates - Pin Retainers
Stock/Usage at 31-10-2013
CODE Price Pin Hole Dia Cost $1,712
16 - 47 Y111 - 40x40 $30 E20 L40 W40 H76 176 Z 5 0pa Also: 10-45 Q115-20x13 $19 E19, G19, H58, Z2
12 - 51 X114 - 52x40 $30 E39 F102 G70 H70 204 C 0pa cat966g-pin-a,b,d
12 - 51 X115 - 40x30 $30 E36 F100 G70 H85 200 C 9 3pa $11 cat966g-pin-e,l,k
12 - 65 U117 - 66x32 $40 E45 J25 K80 H C 17 0pa $11 CASE 610 ,710,721 BKT LIFT & LINK EliteAttachments
12 - 70 X119 - 48x40 $49 E36 F150 G100 H106 225 B 15 10pa $17 WA500-PIN-J,K,L C=120
12 - 75 Y119 - 60x80 $54 H116 225 C 15 0pa $17 WA600-PIN-J NEXT: H121
12 - 84 Q120 40x48 $52 E38 F150 H106 242 C 14 0pa $18 WA480-PIN-A, Also Q121 x 9 off $14
10 - 50 U120 - 22x16 $22 E30 J10 K50 H70 Z 5 0pa Also: 8-63 T120 - 2x33Ø, $53 H96, PC45-TU, Z7
20 - 65 Y120 - 42x56 $46 E21 L42 W56 H96 206 D 4 0pa PC220-A
12 - 70 X120 - 48x40 $46 E35 F150 G100 H117 225 B 28TYPE
10pa $16
X WA500-PIN-C,D,E C=120,WA600-PIN-C
12 - 97 X121 - 48x40 $50 E38 F150 G100 H117 255 C 44 2pa $14 2xM12 WA500-PIN-A,B C=120
12 - 85 Y122 - 75x100 $50 E38 - - H136 245 D 17 2pa $17 WA600-PIN-K TYPE Q
20 - 50 Y125 - 40x40 $40 E20 L40 W40 H76 0 0pa SAMSUNG 280 PIN B
20 - 69 Y126 - 52x52 $64 E26 L52 W52 H105 C 10 6pa $25 PC600-PIN-H,I,J,K
20 - 68 Y127 - 60x60 $50 E30 L58 W60 H106 225 C 7 5pa $25 PC300-A,F
20 - 72 Y130 - 60x60 $50 E30 L60 W60 H116 232 C 12 3pa $14 PC400-A,F +19 OK
12 -100 X130 - 55x45 $58 E50 F180 G100 H136 280 C 22 0pa $18 WA500-PIN-F,WA600-PIN-A,B,D,E
10 - 50 T135 -2x16Dia $40 H52 214 Z 2 0pa
16 - 65 U144 - 0 $35 E16 K32 L0 W0 225 C 7 0pa EX350-PIN,A,F
16 - 65 Q148 - 46 $44 E35 E150 H76 Z 3 0pa EX350
16 - 65 Q149 - 46 $38 E35 C150 H86 250 Z 6 0pa EX350-PIN-F-LONG REACH
16 - 65 Q150 - 46 $40 E35 250 D 12 0pa EX350-PIN-B,F STANDARD
12 - 46 X151 - 52x43 $52 E51 F160 G125 H81 Z 2 0pa Also: 12-55 X150-52x40 $52 E20, Z3
20 - 75 Y154 - 35x40 $50 E17 L35 W40 H125 244 D 3 0pa PC800
12 -120 X160 - 55x45 $90 E55 F230 G120 H156 335 Z 6 0pa WA600-PIN-F
12 - 72 Y161 - 60x60 $55 E30 L60 W60 H116 C 12 TYPE Y
0pa
16 - 60 Y163 - 62x50 $55 E30 L60 W50 H71 253 B 5 0pa D85A-18
12 - 68 V196 - 50x32 $46 E35 L51 W32 H66 Z 7 0pa EXCEL#24071 P70-158P AT167601 PG121
20 - 83 Y203 - 64x44 $90 E32 L64 W44 H109 318 C 4 0pa D11 RIPPER
Indexation of Grease Exits to End Plates
Plate is viewed with pin hidden, as viewed on the machine, or as by a person welding the plate.
The long end of the PLATE (or bolt hole end) at 12 o’clock, (or pointing away from person welding).
The grease exit position on the circumference is described in an o’clock position, ie, for pin at right:
Grease Exit = 3 o’clock. (Abbreviated in this catalogue to “3 clk”.)
Unless specified, assume grease exit is at 6 o’clock
Weld-on End Plates - Round
CODE PRICE Stock AT 01-07-2013
OD ID Width Usage - Cost
35 Ø x H23 x 6 $10 C 6 0pa $3 Byrnecut
50 Ø x H28 x 6 $10 C 20 0pa $2
58 Ø x H33 x 6 $10 D 12 8pa $4 PC20, PC30 PIN H,I,J,K
55 Ø x H37 x 12 $10 Z 32 0pa
64 Ø x H38 x 6 $10 C 1 0pa
65 Ø x H39 x 6 $10 B 29 2pa $2
56 AF, 76 Ø x H40 x 6 $13 B 40 0pa PC40 PC45 H,I
60 Ø x H41 x 8 $12 B 20 2pa $3
76 Ø x H46 x 7 $14 C 0pa $6 PC75-PIN-I
66 Ø x H44 x 12 $12 C 36 0pa $4 Minimum $150
72 AF x H48 x 6 $10 Z 20 0pa Minimum $150
applies before GST & Freight
72 AF x H49 x 10 $12 D 3 0pa applies before GST & Freight
90 Ø x H56 x 6 $13 C 19 0pa PC120-J,K Tools and Accessories
75 Ø x H57 x 12 $17 C 23 1pa $7
90 Ø x H58 x 12 $17 C 21 24pa $7 Tools andmayAccessories
be used to make up
mayMinimum
be used Wholesale
to make upOrders of $150
76 Ø x H60 x 11 $13 C 6 0pa MinimumAllWholesale Orders
prices subject of $150
to change without notice
92 Ø x H61 x 8 $14 D 1 0pa PC120-G,H
120 Ø x H65 x 10 $20 C 0pa All prices subject to change without notice
100 Ø x H66 x 12 $20 C 63 12pa $7
86 Ø x H67 x 12 $10 D 31 0pa
115 Ø x H76 x 12 $20 A 34 30pa $7 PC200-J,K PC220-H,I,J,K
170 Ø x H80 x 20 $30 B 0pa EIMCO 242 352 *UNMACHINED at TOLPARK
120 Ø x H86 x 12 $22 A 25 30pa $8 PC300-H,I,J,K ’07 LASER $10 WITH H67
180 Ø x H90 x 20 $30 C 0pa OXYCUT ’07 $10
130 Ø x H96 x 12 $25 B 33 28pa $10 PC400-H,I,J,K

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 48 November 2013
Located in the Newcastle - Sydney Region - Australia
CASE PART No. TO K-SET PART No. CROSS REFERENCE AND PRICE LIST
CASE LOADERS AND BACK-HOE LOADERS
REF. No. PRICE EA PART No. REF. No. PRICE EA PART No. REF. No. PRICE EA PART No. REF. No. PRICE EA PART No.
EX GST EX GST EX GST EX GST
100696A1 $ 23 B48-38-29 D136569< $ 56 B90F70-33 D33635 $ 44 B76-64-26 D91240 $ - P51G399C
101907A1 $ 110 B120G100-25 D136569 $ 58 B90F70R38 D33659 $ 32 B64-51-19 D91241 $ 50 B70-51-60
105752A1 $ 166 P70G102P D136570 $ 30 B55-40-30 D33678 $ 34 B64-51-22 D94018 $ 25 B54-45-30
107124A1 $ 26 B57-44-30 D136574 $ 47 B70-50-36 D33827 $ 24 B41-32-32 D94019 $ - P44-197M
112294A1 $ 130 P70-156C D136649 $ 160 P70G152C D33858 $ 21 B54-44-16 D95362 $ 46 B63G51-56
114318A1 $ 36 B90-80-30 D136715 $ 75 B90-70R50 D34340 $ 24 B54-44-26 E172051 $ 27 B50-40-32

121779A1 $ 166 P70G102P D137217 $ 54 B70-50-54 D34354 $ 32 B54-44-39 E172196 $ 34 B70-50R38

124568A2 $ 38 B80-70-28 D137218 $ 66 B90-70-44 D34655 $ - P51G112C E172976 $ 140 P51G402C
135247A1 $ - P51-195C D137345 $ 32 B60-50-36 D34658 $ - P44G111C E173077 $ 32 P32-199C
135248A1 $ 39 B64-51-37 D138022 $ 130 P50-240C D35071 $ 24 B54-44-29 E175909 $ - P40C362
135249A1 $ 36 B64-51-28 D138023 $ 92 P50-290C D37286 $ 60 P38-166C E175913 $ - P40-117
139262A1 $ 166 P70G161C D138038 $ 166 P70G153C D37287 $ 60 P38G166C E175953 $ - P70G115P

142698A1 $ 190 P70G102P D138042 $ 62 B86-70-34 D37392 $ 24 B54-44-31 E176155 $ 42 B70-50R40

1542668C1 $ 33 B57-40-24 D138047 $ 41 B60-50-54 D37495 $ 26 B57-44-32 E176190 $ - P38-250
175596A1 $ - P80G102P D140029 $ 33 B60-50-26 D37614 $ 78 P38-243C E176194 $ 44 B86-70-25
175597A1 $ 190 P70G175C D140093 $ 166 P70G102P D37763 $ 28 B48-38-29 E176195 $ - B86-70M32
180427A1 $ 43 B60G50G63 D140306 $ 48 P40-160C D38943 $ 33 B64-51-29 E176196 $ 58 B86-70-32
192559A1 $ 36 B90-80-30 D140653 $ 110 P44-152R D40039 $ 70 P44G146C E176201 $ 164 P70G130P

1986794C1 $ 104 B100-80-21 D140653W $ 48 P44-152 D40218 $ 52 P51-130C E176202 $ 140 P70G130
300588A1 $ 70 B40-27-136C D140655 $ 130 P44-349R D40243 $ 18 B57-44-19 E176203 $ - P50-146C
307186A1 $ 68 B57T44-104 D140655W $ - P44-349 D42429 $ 28 B48-38-39 E176204 $ 146 P50G335C
D112294 $ 112 P70-156C D140657W $ 134 P70G117 D42788 $ 43 B54-44-58 E176205 $ 84 P50-277C
D121845 $ 34 B57-44-70 D141142 $ 170 P50G306C D43946 $ 34 B31B63-51-35 E176206 $ - P50-225C
D123653 $ 260 P57G109T D141249 $ 40 B70-50-26 D44881 $ 34 P38-137C E176208 $ - P50G96

D126717 $ 60 P38-166C D141389 $ 43 B70-50-34 D45523 $ - P51-276C E176209 $ 56 B90-70R40

D126718 $ 60 P38G166C D141555 $ 41 B60-50-40 D45904 $ 24 B38-27-99 E176226 $ 30 B60-50-27
D127167 $ 46 B70-57-30 D141666 $ 90 P50-199C D46405 $ 21 B54-44-22 E176360 $ 150 P57G126P
D126168 $ 47 B57-44-94 D144162 $ 44 B90F80-17 D46917 $ - P38G197P E176361W $ 114 P57G126
D127172 $ 22 B57-44-28 D144170 $ 44 B90-80-20 D46917W $ - P38G210 W E176478 $ 36 B60-50-45
D127196 $ 34 B70-50R38 D144421 $ 56 B80-70-25 D49429 $ 28 B48-38-39 E176653 $ 56 P40-159MC

D127198 $ - P40-106C D145080 $ 66 B70-50-78 D49863 $ - P44-249M E48844 $ 190 P70G168C

D127199 $ - P40-106CR D146288 $ 80 P44-152R D49865 $ - P51-305 E48845 $ 206 P63G231
D127445 $ - P50G450GC D147280 $ 110 B120G100-21 D49866 $ 32 P38G97 E48847 $ 200 P70G147CW
D127542 $ 30 B60-50-30 D148798 $ 66 B70-50-78 D50146 $ 26 B57-44-38 E79531 $ - P60G140
D129061 $ 40 B57G44-52 D150122 $ 31 B60-50-33 D50170 $ - P51G130PC G103411 $ 15 B48-38T20
D129240 $ 36 B50-40-70 D150608 $ 31 B60-50-33 D50187 $ 80 P38G163 G108310 $ 47 B76-64-23

D129257 $ - P40G175C D150619 $ - P44G372C D50490 $ - P51-203 G108417 $ 40 B67-50R46

D129264 $ 27 B50-40-28 D151058 $ 66 B90-70-63 D50698 $ 40 B70-51-41 G108507 $ 22 B48-40-38
D129272 $ 24 B60-50-19 D151059 $ 56 B100F80-46 D50700 $ 60 P51G94P G108516 $ 34 B57-40-23
D129279 $ - P40G122C D151060 $ 50 B90-70-30 D51391 $ - P38-188 G108525 $ 38 B67-50R30
D129889 $ - P44-349 D151065 $ 166 P70G153C D51392 $ - P32-103 G108526 $ 34 B57-40-23
D132076 $ 40 B38-27-135 D151069 $ 51 B90-70-32 D51393 $ 66 P40-178C G108689 $ 24 B67-50R24

D132493 $ 136 P50G302C D151070 $ 50 B90-70-38 D52522 $ 36 P44-218C G110117 $ 40 B60-49-27

D132494 $ - P70G301T D151071 $ 56 B90F70-38 D52579 $ 36 B70-57-28 G33858 $ 21 B54-44-16
D135023 $120 P50-290C D151073 $ 62 B86-70-34 D53818 $ 76 P44-279C G34854 $ 21 B54-44-22
D135075 $ 43 B70-50R30 D30756 $ 27 B64-51-32 D55584 $ 44 P44G321C G35361 $ 18 B32-26-16
D135555 $ 46 B90-70R32 D30899 $ - P38-338C D55626 $ 28 B57-45-42 L112479 $ 40 B65-50G35
D135556 $ 46 B90-70R38 D30929 $ 28 B48-38-39 D61241 $ 25 B57-44-24 L78791 $ 70 P44G140C

D135557 $ 62 B86-70-30 D30930 $ 21 B48-38-18 D64799 $ - P44G372C R26633 $ 57 B76G64G46

D135558 $ 64 B86-70-34 D30931 $ 41 B48-38-70 D67357 $ 24 P38-130 R27061 $ - P51-206C
D135559 $ 60 B86-70-28 D30932 $ 23 B48-38-29 D72337 $ - P51-169M R27170 $ 36 B57G44G57
D135603 $ 66 P40-178C D30933 $ 23 B48-38-32 D74004 $ - P51G130PC R30127 $ - P57-204P
D135604 $ - P40-152C D31140 $ 26 B48-38-25 D77326 $ 42 P38G113C R41197 $ - P51G109C
D135669 $ 84 P50-277C D31142 $ 36 B64-51-38 D80739 $ 32 P38-164C R41198 $ - P51-127C

D135691 $ 48 P44-152 D31219 $ 30 B38-27-111 D89321 $ 42 P38G113C R45432 $ - P51-194P

D135692 $ 80 P44-152R D31511 $ 15 B48-38T20 D89366 $ - P38-145 R45895 $ - P70G195P
D135739 $ - B90-70M44 D31512 $ 18 B57-48-19 D89838 $ 44 P44-323C R48922 $ - P51-207C
D135740 $ 66 B90F70R39 D32930 $ - P38-127C D90422 $ 20 B38-27-87 R48926 $ - P51G154C
D135741 $ 48 B90-70-24 D33032 $ 45 B64C51G51 D90722 $ 46 B76-57-43
D135742 $ 56 B90F70-24 D33047 $ 21 B54-44-22 D90727 $ 80 P57G198P

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320

Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 49 November 2013
Located in the Newcastle - Sydney Region - Australia
 Pins and Bushes to suit CASE 580SK, 580SLE

SIDE-SHIFT BACKHOE
EUROPEAN SERIAL NO’S JJH0010001 ON

Description Kgs K-Set Part No. Price Each Reference Original No.
(ex GST) DRILLS - TAPS - DIES - BURRS
See Page 66
A PIN, BOOM (wasD140093) 4.0 580SK-PIN-A $ 190 P70G102P 142698A1

BUSH, BOOM (2) 0.8 580SK-BUSH-AB $ 56 B90F70-38 D151071

“ , BEFORE 0047600 (2) “ “ “ “ $ 58 B90F70-33 D136569
BUSH, TOWER INNER (2) 0.5 580SK-BUSH-ATI $ 56 B90F70-24 D135742
BUSH, TOWER OUTER (2) 0.5 580SK-BUSH-ATO $ 48 B90-70-24 D135741

B PIN, LIFT CYL TO TOWER 4.6 580SK-PIN-B $ 130 P70-156C 112294A1

BUSH, TOWER (2) 0.8 580SK-BUSH-BT $ 66 B90F70R39 D135740
BUSH, LIFT CYLINDER (2) 0.3 580SK-BUSH-BC $ 56 B80-70-25 D144421

C PIN, LIFT CYL TO BOOM 4.5 580SK-PIN-C $ 120 P50-290C D135023

BUSH, CYL ROD (2) 1.5 580SK-BUSH-CB $ 66 B70-50-78 D148798=D145080
BUSH, BOOM 0.3 580SK-BUSH-CR $ 41 B60-50-40 D141555

D PIN, ARM CYL TO BOOM 3.7 580SK-PIN-D $ 130 P50-240C D138022

BUSH, BOOM (2) 0.8 580SK-BUSH-DB $ 54 B70-50-54 D138047=D137217
BUSH, ARM CYL (2) 0.8 580SK-BUSH-DC $ 40 B67-50-40 D141555
“ , BEFORE 0014389 (2) 0.6 “ “ “ $ 40 B67-50R46 G108417

E PIN, ARM CYL TO ARM 3.7 580SK-PIN-E $ 130 P50-240C D138022

PIN, CYL TO EXT ARM 3.0 580SK-PIN-EX $ 90 P50-199C D141666
BUSH, ARM (2) 0.8 580SK-BUSH-E $ 54 B70-50-54 D137217
BUSH, EXTENDING ARM 0.5 580SK-BUSH-EX $ 43 B70-50-34 D141389
BUSH, CYL ROD (2) 0.5 580SK-BUSH-ER $ 41 B60-50-40 D141555
“ , BEFORE 0014389 (2) 0.6 “ “ “ $ 40 B67-50R46 G108417

F PIN, BOOM TO ARM 9.0 580SK-PIN-F $ POA P70G301T D132494

BUSH, BOOM 0.9 580SK-BUSH-FB $ 66 B90-70-44 D137218
BUSH, BOOM, SLOTTED 0.9 580SK-BUSH-FBS POA B90-70M44 D135739
BUSH, EXTENDING ARM (2) 0.8 580SK-BUSH-FX $ 66 Minimum $150
B90F70R39 D135740
applies before GST & Freight
Tools and Accessories
may be used to make up
Minimum Wholesale Orders of $150
All prices subject to change without notice

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 50 November 2013
Located in the Newcastle - Sydney Region - Australia
 Pins and Bushes to suit CASE 580SK, 580SLE

Description Kgs K-Set Part No. Price Each Reference Original No.
(ex GST)

G PIN, BKT CYL TO ARM 3.7 580SK-PIN-G $ 130 P50-240C

SNIPS $ 38.00 ea
D138022

PIN, BKT CYL TO EX ARM 3.0 580SK-PIN-GX $ 90 HI-TENSILE

P50-199C plus GST
D141666
BUSH, ARM (2) 0.8 580SK-BUSH-G $ 54 Black Panther - 185 mmD137217
B70-50-54
BUSH, BKT CYL TUBE (2) 0.5 580SK-BUSH-GC $ 41 B60-50-40
Cuts D141555
wire netting, light guage
“ , BEFORE 0014400 (2) 0.5 “ “ “ $ 40 B67-50R46 G108417
aluminium, carpet, leather,
Kevlar O,
R etc...
H PIN, BKT CYL TO LINKS 4.7 580SK-PIN-H $ 170 P50G306C D141142
BUSH, GUIDE LINKS (2) 0.4 580SK-BUSH-HGL $ 33 B60-50-26 D140029
BUSH, DUMP LINK (2) 0.8 580SK-BUSH-HDL $ 41 Code: TL-29-702
B60-50-54 D138047
BUSH, CYL ROD 0.4 580SK-BUSH-HR $ 33
B60-50-26 D140029
“ , BEFORE 0014400 (2) 0.4 “ “ “ $ 38 Pack; Snips, HI-TENSILE
6B67-50R30 G108525
Black Panther - 185 mm
X PIN, EXTENDING ARM CYL 0.7 580SK-PIN-X $ 70 B40-27-136C
RED GRIPS $ 178.00 300588A1
/6
PIN, ARM TO GUIDE LINKS 4.7 580SK-PIN- $ 170 P50G306C D141142
BUSH, DIPPER ARM (2) 0.4 580SK-BUSH- A $ 40 Code:TL6-29-702
B70-50-26 D141249
BUSH, GUIDE LINKS (2) 0.4 580SK-BUSH- L $ 33 B60-50-26 D140029

J PIN, BKT / ARM (USE D150619) 4.4 580SK-PIN-J ($62 WR) $ 130 P44-349R D140655
BUSH, ARM (WAS D127168) (2) 0.7 580SK-BUSH-J $ 68 B57T44-104 307186A1
BUSH, COUPLER (2) 0.2 580SK-BUSH-JC $ 46 B70-57-30 D127167

K PIN, BKT TO COUPLER 2.1 580SK-PIN-K $ 78 P38-243C D37614

L PIN, BKT COUPLER / LINK 1.7 580SK-PIN-L ($54 WR) $ 110 P44-152R D140653
BUSH, DUMP LINK (4) 0.2 580SK-BUSH-L $ 22 B57-44-28 D127172

S PIN, SWING CYL - TOWER 5.7 580SK-PIN-S $ 206 P63G231 E48845

BUSH, CYLINDER ENDS (4) 0.2 580SK-BUSH-SR $ 47 B76-64-23 G108310

TU PIN, TOWER - NO PLATE 4.5 580SK-PIN-TU $ 200 P70G147CW E48847

BUSH, TOP 0.5 580SK-BUSH-TUT $ 62 B86-70-30 D135557
BUSH, INNER 0.4 580SK-BUSH-TU $ 60 B86-70-28 D135559

TL PIN, TOWER LOWER 5.0 580SK-PIN-TL $ 190 P70G168C E48844

BUSH, INNER SLOTTED 0.5 580SK-BUSH-TLS $ 64 B86-70-34 D135558
BUSH, BOTTOM 0.4 580SK-BUSH-TLL $ 60 B86-70-28 D135559
BUSH, SLIDING FRAME (2) 580SK-BUSH-SF $ 75 B90-70R50 D136715

PU BUSH, TOP PIVOT 0.6 580SK-BUSH-PU $ 51 B90-70-32 D151069

PL BUSH, LOWER PIVOT 0.7 580SK-BUSH-PL $ 50 B90-70-38 D151070

TRU BUSH, TRUNNION - UPPER 0.6 580SK-BUSH-TRU $ 110 B120G100-21 D147280

TR BUSH, TRUNNION - INNER x 2 0.5 580SK-BUSH-TR $ 104 B100-80-21 1986794C1

TRL BUSH, TRUNNION - LOWER 0.7 580SK-BUSH-TRL $ 110 B120G100-25 101907A1

Minimum $150
applies before GST & Freight

Tools and Accessories

may be used to make up
Minimum Wholesale Orders of $150
All prices subject to change without notice

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 51 November 2013
Located in the Newcastle - Sydney Region - Australia
 PINS AND BUSHES TO SUIT CATERPILLAR WHEEL LOADERS

3ZS 966G 980G

Description Qty K-Set Part No. Price ea. Qty K-Set Part No. Price ea.
EX GST EX GST
A Pin, Frame to Lift Arm (2) 966G-PIN-A $ 320 (2) 980G-PIN-A $ 610
Bush (2) 966G-BUSH-A $ 120 (2) 980G-BUSH-A $ 180

B Pin, Frame to Lift Cyl (2) 966G-PIN-B $ 280 (2) 980G-PIN-B $ 528
Bush (2) 966G-BUSH-B $ 120 (2) 980G-BUSH-B $ 150

C Pin, Lift Cyl to Lift Arm (2) 966G-PIN-C $ 258 (2) 980G-PIN-C $ 370
Bush 966G-BUSH-C $ 80 (2) 980G-BUSH-C $ 150

D Pin, Dump Cyl - Lift Arm (1) 966G-PIN-D $ 320 (2) 980G-PIN-D $ 368
Bush (1) 966G-BUSH-D $ 120 (4) 980G-Collet-D $ 130
(2) 980G-BUSH-D $ 120
E
Pin, Tilt Lever to Cyl (1) 966G-PIN-E $ 220 (2) 980G-PIN-E $ 250
Bush (1) 966G-BUSH-E $ 120 (2) 980G-BUSH-E $ 120

F Pin, Centre Tilt Lever (1) 966G-PIN-F $ 596 (2) 980G-PIN-F $ 534
Bush (1) 966G-BUSH-F $ 180 (2) 980G-BUSH-F $ 180

L Pin, Link to Tilt Lever (1) 966G-PIN-L $ 220 (2) 980GPIN-L $ 280
Bush (1) 966G-BUSH-L $ 90 (2) 980G-BUSH-L $ 82
K Pin, Bucket to Link (1) 966G-PIN-K $ 220 (2) 980G-PIN-K $ 320
Bush (1) 966G-BUSH-K $ 90 (2) 980G-BUSK-K $ 82

J Pin, Bucket to Lift Arm (2) 966G-PIN-J $ 155 (2) 980G-PIN-J $ 388
Bush (2) 966G-BUSH-J $ 66 (2) 980G-BUSH-J $ 282

S Pin, Steering Cylinder (4) 980G-PIN-S $ 263

Bush (8) 980G-BUSH-S $ 60

Minimum $150
KSet
KSetEngineering
EngineeringPty
PtyLtd
Ltd 3333Johnson
Johnson Street
StreetMaitland
MaitlandNSW
NSW2320
2320
applies
Phone
Phone before
02024932 GST
49323530
3530 & Freight
Fax:
Fax:02024932
49323100
3100Email:
Email:
sales@kset.com.au
sales@kset.com.au Page
Page5245November
November2013
2013
Located
Located
in in
thethe
Newcastle
Newcastle
- Sydney
- SydneyRegion
Region- Australia
- Australia
 PINS & BUSHES TO SUIT CATERPILLAR
74Z D11N Ripper Frame

B B

A A C C

LOCATION QTY OEM No. KSET Part No. Price Ea NOTES

plus gst END PLATE

A-A PIN 2 9J3226 P114-350P $ 550 4.498” Dia, K6 x 15° 20-65Y205-40x50-20

1.5” UNF x 85 Plate end

B-B PIN 2 9J6691 P89-350P $ 320 3.502” Dia, K7 x 15° 20-75Y197-64x54-32

C-C PIN 2 4T2805 P114-370P $ 610 4.500” Dia, K5 x 15° 20-88Y196-60x50-30

1.5” UNF x 75 Plate end
D-D PIN 2 9J2290 P89-239P $ 260 3.498” Dia, K5 x 15° 20-69Y200-60x50-30

E-E PIN 2 4T0203 P76-222P $ 210 2.999” Dia, K5 x 15° 20-68Y205-40x50-20

5/8”UNC x 46 Plate end
F-F PIN 2 5J1204 P76-272P $ 260 2.999” Dia, K8 x 15° 20-69Y200-60x50-30

BUSH 4 9J-1914 B140-114-67 $ 98 5.504 x 4.518 x 2.63”

ID 2 x 45°, OD 2 x 10°

Blade PIN 2 9W-2939 P57-285C $ 178 2.254” Dia C28 M14 J38
Lift Cyl K13 x 15°(Opp Groove) S3 x 45°

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 53 November 2013
Located in the Newcastle - Sydney Region - Australia
LOCATION GUIDE TO SUIT CATERPILLAR BEARINGS
CATERPILLAR K-SET CATERPILLAR K-SET CATERPILLAR K-SET CATERPILLAR K-SET
PART No. LOCATION No. PART No. LOCATION No. PART No. LOCATION No. PART No. LOCATION No.
1J2087 B60-51-57 3J3185 B64-51-45 6K4076 = B64-51-40 7K9576 B102-89G76
1J2192 B67-57-76 3J6167 B89-77-57 6K4148 B51-38-27 7K9589 = B57-44-36
1J5304 B102-89-76 3J6442 B89-77-33 6K4177 B95-67-32 7K9590 B76-64G51
3J6494 B108-89-35 6K4197 B81-57-32 7K9591 B83G70-114
1V1290 B64-51G70 3J9133 B70-57-64 6K6042 B57-44-70 7K9592 = B51G38-29
1V1292 B83-70G83 3K0139 B83-70G64 6K6043 B83-57G73 7K9593 B51G38-48
1V3342 B64-51G51 3K0814 B89G76G125 6K6044 B57-44G32 7K9601 B57G44-54
1V5635 B146G127G132 3K0868 B64-51G89 6K6350 B89-67G111 7K9602 B57-44G54
1V6931 B152G133G114 6K7983 B57-67G59 7K9603 B83-70G51
3K2000 B83G70-44 7K9604 B89-76G89
1V6934 = B114G96-88 3K2132 B83-64G144 6S3459 B64-51-35 7K9638 B95G83G133
1V7001 B133G114G184 3K2144 B51-38G64 6S3463 B64-51-39 7K9639 B64G51G48
1V7002 B133G114-108 3K2151 B51-38G44 6S3465 B51-38-35
1V7036 = B114G96-107 3K5242 B89-76G83 7K9640 B70-57G60
1V8240 = B133G114-130 3K8155 B95-83G64 7J0051 B114-89-57 7K9642 B64-51G73
1V8241 = B121G108-118 3P2429 B95-76-133 7J0052 B114-89-73 7K9643 B95-83-67
1V8242 = B104G89-94 3V2333 B104-89G110 7J5392 B178-149-64 7K9644 B64G51-73
1V9143 = B146G127-105 7J7887 B102-89-95 7K9686 B76-64-32
1V9148 = B89G76-94 4J2379 B102-89-44 7J8458 BB95-83-83 7K9946 B146-127G38
1V9617 B140-127G48 4J4082 B38-32-29 7J9344 = B76-64G44
4J5693 B108-95-76 7P1576 B70G57G57
2D4187 B57-48G29 4J5694 B108-95-92 7J9345 B108-95G54 7P3453 B89-76G98
2G7388 B60G51G64 4J5695 B114-95-89 7J9346 = B89G76G64 7P3454 B76-64G64
2G8607 = B82-70-45 4J6167 B64-51-41 7J9366 B95-83-41 7P3455 B70-57G83
2G8608 B64-51G29 4J6374 B60-51-32 7J9374 B83-70G57 7P3463 B114-102G191
2G8624 B57G44G19 7J9635 B83-70G44 7P3466 B82G70G70
2G8631 B57-44-34 4J6533 B89G76G102
2G8635 = B64G51G33 4K1101 B76-64G124 7J9682 B64G51G48 7S2687 B133-114-140
2G8661 B57-44G48 4K8659 BB98G76G76 7J9688 = B57-44G35 7S2856 B82G70G75
2G8736 B48G38G60T 4T0370 = B82-70-32 7J9694 = B89-76T40 7S2863 B95-83-70
4T3845 B140-114-117 7J9699 B70-57-48 7Y3553 = B106g90X90
2J8489 B54-44-51 4T9751 = B114-89-51 7J9705 B89G76G83
2K4504 = B57-44G63 7J9707 B102-89G64 8E6752 = B82-70-45
2K4508 B57-44G83 4V2883 = B82-70-56 8J2354 B108G89G121
2K4509 B64-51G64 4V2879 B118-102-60 7J9708 B70-57G41 8J2355 B102-89G89
2K4510 = B64-51G75 4V8520 B104G89G82 7J9709 B89G76G57 8J5778 B76G64G44
2K4511 B70-57G48 4V8674 = B89-76G81 7J9731 = B76G64G70 8J6384 B60-51-34
2K4512 B70-57G56 4V8675 B76G64-109 7J9732 B76-64G57 8J6535 B57-44-80
2K4513 B70-57G64 7J9745 B76-64G38 8J6536 B89-76-73
5D1705 B57-44-38 8J7694 B102F76-98
2K4373 B64-51G114 7J9794 B76-67G70 8J9926 = Bronze BB82G70-67
2K4375 B70-57G76 5J1193 B102-89-51 7J9804 B118G102G89
2K4441 B102-89G76 5J3492 B114G95G57 7J9814 B114G95G57 8K5736 B118-102-76
2K4442 B76-64G57 5J6334 B124-111-29 7J9842 B51-38G29 8K5757 = B89-76G107
2K4443 B70-57G114 5J6611 B108-95-89 7J9911 B108-89G64 8K6006 B108-70-30
2K4444 B102-89G83 5J7876 B64G51G63 8K6276 B104-89-27
2K4501 B51-38G76 5J8361 B124-108-76 7K0078 B76G64G57 8K6481 B146G127-86
5J8363 = B124-108-101 7K0084 = B64-51G48 8K7613 B108-89-67
2K4502 B57-44G51 7K0085 B76G44-60
2K4503 B57-44G57 5K0984 B104-76-22 7K0086 = B83-70G57 8K7614 B146-127G159
2K4504 B57-44G64 5K3494 B121-89-32 7K0087 B64-51G57 8K7615 B133-114-159
2K4505 B64-51G51 5K3496 BB114G89G89 7K0088 B57G44-35 8K7618 B82-70-57
2K4506 B76-64G51 5K4787 B108-89-64 8K7624 B140-127-41
2K4507 B76-64G64 5K7037 B102-89-95 7K1513 B114-89-64 8K7677 B108-89-57
2K4509 = B63-51G63 5K7038 B89-76G95 7K7195 B57G44G51 8K7678 B83G64-64
5K7039 B137G121-95 7K8114 B82-70-74
2K4510 = B64-51G75 5K7041 B64G51G76
2K4514 B89-76G64 7K8115 B146-127-140 8P0420 B70-57-51
2K7041 B64G51G76 7K9063 B143-127-89
5K7991 B121-102G127 7K9472 B104-89G83 8V0913 B159-114-117
2K7648 B57-44G76 5K7995 = B76-64-60
2K8530 B95G83-41 7K9528 B76-64-51
5K8595 B121-102G89 9J1676 BBG64G64
2K8714 B95-83G76 5K8602 B89-76G89 9J5427 B89-83-83
2V5635 B146G127G132* 7K9529 B76G64-57
5K9026 B95-83-54 7K9530 B121G108-32 9J5875 B70-57G64
7K9531 B95-83-44 9J7078 B89G76G133
3D4505 B38-32-29 9J7099 B102G89G95
3D4718 BB86-83-44 5V1386 = B133G114-150 7K9532 B121-102G108
5V1874 B76G64-95 7K9533 B146-127G108 9J7100 = B102G89G111
3G4704 B64G51G35 7K9545 B121G102-70 9J9911 B108-89G64
3G5999 B95G76G60 6J2242 B76-64-32
3G5999 B95G76G60 6J6043 B76-64-35 7K9546 B57G44G44 9K8423 B104G89G111
3G6402 = B114-89G85 7K9547 B57G44-64 9K8425 B102G89-89
3G8052 = B92-79-64 6K2694 B83-57-32 7K9548 B89G76-70 9K9158 B111G95-29
3G8595 B64-51G70 6K2697 B81-57-32 7K9549 = B64G51G60 9K9159 = B104G89-27
3G8606 B89-76G57 6K2702 B76-57-54 7K9572 B64G51G79 9K9851 B104-89-156
3G8779 B95G83G83 6K2899 B57-44-34 7K9573 = B89-76G75 9R0111 = B53-40-38
3G9191 B95-83G95 6K3177 B76G64-76 7K9575 B131-121G76 9R0411 = B58-45-34
3G9598 = B83-70-60 6K3194 B64-51-95

Minimum $150
KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320

Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 54 November 2013
applies before GST & Freight Page 54 November 2013
Located in the Newcastle - Sydney Region - Australia
 K-SET Pins & Bushings to suit EIMCO LHDs 130, 912, 913, ED7, ED10

REFERENCE K-SET PART No. PRICE WEIGHT REFERENCE K-SET PART No. PRICE WEIGHT
A2U130-193210 PIN P89G326 $ 370 15.00kg A2U913-194073 BOSS B76-64-116 $ 94 1.24kg
A2U130-193327 PIN P89G312G $ 358 14.82kg A2U913-194145 BUSH B54-38-54 $ 60 0.48kg
A2U130-193329 PIN P89-541 $ 492 26.20kg A2U913-194148 BUSH B100T76X89 $ 190 2.20kg
A2U130-193330 PIN P76-268 $ 268 9.31kg A2U913-194149 BUSH B133T76R67 $ 298 4.66kg
A2U130-193332 PIN P63-318 $ 192 7.76kg A2U913-194150 BUSH B100-76X75 $ 180 1.90kg
A2U130-193333 PIN P89G326 $ 370 15.00kg
A2U130-193334 PIN P38-128M $ 114 1.12kg A2U913-194197 BOSS B54-38H90 $ 110 0.76kg
A2U913-194264 BOSS B54-38H82 $ 90 0.70kg
A2U130-193335 PIN P38-100M $ 110 0.88kg A2U913-194265 BUSH B100-76X144 $ 248 3.62kg
A2U130-193336 PIN PG51G121M $ 126 2.46kg A2U913-194355 BOSS B114-102-60 $ POA 0.98kg
A2U130-193337 PIN P63G305 $ 218 7.29kg A2U913-194356 BOSS B114-102H80 $ POA 1.28kg
A2U130-193339 PIN P63G308 $ 250 6.84kg
A2U130-193380 PIN PG51G115M $ 126 1.72kg A2U936-193247 PIN P89G260G $ 430 12.4kg
A2U130-193431 PIN P102-421M $ 580 20.40kg A2U936-194288 BUSH B71-60X50 $ 140 0.45kg
A2U130-193432 PIN P76-268 $ 268 9.31kg A2U936-194295 BUSH B71-60X59 $ 140 0.48kg

A2U130-193433 PIN P89G312G $ 358 14.82kg EA6003-6 PIN P38-128M $ 114 1.12kg
A2U130-193434 PIN P89-541 $ 492 26.20kg EA8003 PIN P76G280M $ 292 9.78kg
A2U130-193435 PIN P63G308G $ 250 6.78kg
A2U130-193436 PIN P38-142M $ 130 1.12kg HRB-197 PIN P51G220M $ 172 3.34kg
A2U130-193437 PIN P63G185 $ 190 4.60kg HRB-305 PIN P57G160M $ 191 3.06kg
A2U130-193438 PIN P63G305 $ 218 7.29kg HRB-306 PIN P57G186M $ 198 3.60kg
A2U130-193439 PIN P38-100M $ 110 0.88kg HRB-316 PIN P76G192M $ 230 6.8kg
HRB-317 PIN P76G391M $ 330 13.8kg
A2U130-194277 BUSH B110-89X75 $ 168 1.90kg HRB-320 64400498 PIN P63G286 $ 220 6.82kg
A2U130-194345 RING BB320F295G76 $ 2,650 HRB-321 PIN P63-198 $ 126 6.50kg
A2U130-194369 BUSH BB83G64X89 $ 94 1.72kg HRB-322 PIN P76-125H $ 420 7.50kg
A2U130-194385 BUSH B64-51-25 $ 42 0.22kg
A2U130-194392 BUSH B64F51-26 $ 54 0.25kg 0811 790 PIN P83G387 $ 465 15.00kg
A2U130-196120 NUT N171-74T38 $ 214 4.92kg 222 400 PIN P89-541 $ 492 25.82kg
A2U130-196152 NUT N171-74T38 $ 214 4.92kg 64 222 401 PIN P89G312G $ 382 14.82kg
222 402 PIN P76-267 $ 210 9.30kg
A2U220-193387 PIN P102G240TP $ 580 20.40kg 64 222 403 PIN P63G185 $ 190 4.60kg
A2U220-193388 PIN PG51G127M $ 126 2.03kg
64 222 410 BUSH BB83G64X89 $ 94 1.66kg
A2U220-193397 PIN PG51-161P $ 150 2.75kg
222 411 BUSH BB114G89X64 $ 130 2.20kg
A2U220-193420 PIN P63G314 $ 244 7.80kg
222 412 BUSH BB108G89X76 $ 106 1.90kg
A2U220-193445 PIN P89G338 $ 294 16.30kg
222 413 BUSH BB95G76X127 $ 148 2.85kg
A2U220-193446 PIN P63G327 $ 226 8.13kg
222 414 PIN P51G114M $ 139 1.72kg
A2U220-194399 BUSH B150-125X150 $ 380 6.40kg
222 482 PIN P63G308 $ 250 6.84kg
A2U220-194400 BUSH B64F51-32 $ 48 0.25kg
A2U220-196134 NUT N178-88T38 $ 274 4.89kg
64 226 271 BUSH BB121G102X64 $ 110 1.82kg
64 226 289 PIN P63-318 $ 192 7.76kg
A2U912-193014 PIN P38-100M $ 110 0.88kg
238 040 PIN P102-420M $ 580 25.26kg
A2U912-193109 PIN P51-225 $ 160 3.60kg
242 346 Retainer R229-114-19 $ 235 2.25kg
242 352 PIN P89G222PT $ 598 15.00kg
A2U913-193008 PIN P38-191 $ 62 1.64kg
64 247 065 BUSH BB114G89X148 $ 218 5.30kg
A2U913-193010 PIN P63G240M $ 215 5.80kg
A2U913-193122 PIN P38-134T QTY6: $135 $ 160 1.00kg 6422 2404 PIN P63G305 $ 218 7.32kg
A2U913-193123 PIN P76G240 $ 220 7.92kg 6422 6271 BUSH BB121G102X64 $ 145 1.82kg
A2U913-193195 PIN P76-290 $ 170 10.38kg 6440 0488 PIN P57G160M $ 191 3.06kg
A2U913-194001 BOSS B63-38-41 $ 42 0.64kg 6440 0489 PIN P57G186M $ 198 3.60kg
6440 0496 PIN P76G192M $ 230 6.8kg
A2U913-194013 BUSH B114G102X76 $ 184 1.24kg 6440 0498 PIN P63G286 $ 220 6.82kg
A2U913-194016 BOSS B63-38-41H $ 60 0.62kg 6440 0500 PIN P76-125H $ 310 7.50kg
A2U913-194031 BUSH B76-64-47 $ 57 0.50kg 6480 2959 PIN P102G229 $ 598 15.00kg
A2U913-194032 BUSH B102F89-43 $ 128 0.74kg 6805 9268 BUSH B70-57-41 $ 63 0.36kg
A2U913-194033 BOSS B76-64H108 $ 110 1.12kg
A2U913-194034 BOSS B133-121H57 $ 160 1.10kg 913-3059243 BUSH B70-57-32 $ 53 0.30kg
913-3059250 BUSH B70-57-70 $ 82 0.68kg
A2U913-194035 BOSS B76-64H116 $ 94 1.22kg 913-3059268 BUSH B70-57-41 $ 63 0.36kg
A2U913-194036 BUSH B89-76-39 $ 76 0.50kg 913-3059276 BUSH B70-57-57 $ 74 0.54kg
A2U913-194037 BUSH B89-76-49 $ 68 0.55kg 913-500003 SPACER B106T76-11 $ 130 0.28kg
A2U913-194038 BOSS B76-64H138 $ 102 1.46kg 913-540003 PIN P102G229 $ 598 13.66kg
A2U913-194072 BOSS B76-64H117 $ 102 1.24kg 935-2939313 BUSH B133-121-64 $ 140 1.26kg

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320

Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 55 November 2013
Located in the Newcastle - Sydney Region - Australia
 K-SET Pins & Bushings to suit EIMCO LHDs 130, 912, 913, ED7, ED10

K-SET Part No. Reference No. K-SET Part No. Reference No.
B100 - 76 X75 A2U913-194150 BUSH $ 168 P38 - 100M A2U912-193014 PIN $ 110
B100T 76 X89 A2U913-194148 BUSH $ 190 P38 - 100M A2U130-193335 PIN $ 110
B102F 89 - 43 A2U913-194032 BUSH $ 128 P38 - 128M A2U130-193334 PIN $ 114
B106T 76 - 11 913-500003 BUSH $ 130 P38 - 128M EA-60036 PIN $ 114
B110 - 89 X75 A2U130-194277 BUSH $ 168 P38 - 134T A2U913-193122 PIN $ 160
B114- 102 - 60 A2U913-194355 BUSH POA P38 - 142M A2U130-193436 PIN $ 130
P38 - 191 A2U913-193008 PIN $ 62
B114- 102H80 A2U913-194356 BOSS POA
B114g102X76 A2U913-194013 BUSH $ 184 P51 - 225 A2U912-193109 PIN $ 160
B133- 121H57 A2U913-194034 BOSS $ 160 P51G114M 222 414 PIN $ 139
B133T 76R67 A2U913-194149 BUSH $ 298 P51G220M HRB-197 PIN $ 172
B133- 121 -64 935-2939313 BUSH $ 140 P57G160M HRB-305, 6440 0488 PIN $ 191
P57G186M HRB-306, 6440 0489 PIN $ 198
B54 -38 - 54 A2U913-194145 BUSH $ 60 P57G192M HRB-316 PIN $ 230
B54 -38H 82 A2U913-194264 BOSS $ 90
B54 -38H 90 A2U913-194197 BOSS $ 110 P63 - 198 HRB-321 PIN $ 126
B63 -38 - 41 A2U913-194001 BOSS $ 42 P63 - 318 226 289 PIN $ 192
B63 -38H 41 A2U913-194016 BOSS $ 60 P63G185 A2U130-193437 PIN $ 190
B64- 51 -25 A2U130-194385 BUSH $ 42 P63G185 222 403 PIN $ 190
B64F51 -26 A2U130-194392 BUSH $ 54 P63G240M A2U913-193010 PIN $ 215
P63G286 6440 0498 PIN $ 220
B64F51 -32 A2U220-194400 BUSH $ 48
B70- 57 -32 913-3059243 BUSH $ 53 P63G305 A2U130-193438 PIN $ 218
B70- 57 -41 6805 9268 BUSH $ 63 P63G305 6422 2404 PIN $ 218
B70- 57 -57 913-3059276 BUSH $ 74 P63G308 222 482 PIN $ 250
B70- 57 -70 913-3059250 BUSH $ 82 P63G308G A2U130-193435 PIN $ 250
B71- 60X50 A2U936-194288 BUSH $ 140 P63G314 A2U220-193420 PIN $ 244
B71 -60 X 59 A2U936-194295 BUSH $ 140 P63G327 A2U220-193446 PIN $ 226
B76 -64H108 A2U913-194033 BOSS $ 110
P76 - 125H 6440 0500 / HRB-322 PIN $ 310
B76 -64- 116 A2U913-194073 BOSS $ 94 P76G192M HRB-316 PIN $ 230
B76 -64H116 A2U913-194035 BOSS $ 94 P76G240 A2U913-193123 PIN $ 220
B76 -64H117 A2U913-194072 BOSS $ 102 P76 - 267 222 402 PIN $ 210
B76 -64H138 A2U913-194038 BOSS $ 102 P76 - 268 A2U130-193330 PIN $ 268
B76 -64 - 47 A2U913-194031 BUSH $ 57 P76G280M EA-8003 PIN $ 292
B89 -76 - 39 A2U913-194036 BUSH $ 76 P76 - 290 A2U913-193195 PIN $ 170
B89 -76 - 49 A2U913-194037 BUSH $ 68 P76G391M HRB-317 PIN $ 330
BB108G89 X 64 222 411 Bronze Bush $ 130 P83G387 0811 790 PIN $ 465
BB108G89 X 76 222 412 Bronze Bush $ 106 P89G222PT 242 352 PIN $ 598
BB114G89X148 247 065 .Bronze Bush $ 218 P89G260G A2U936-193247 PIN $ 430
BB121G102X64 226 271 Bronze Bush $ 110 P89G312G 222 401 PIN $ 382
BB 83 G64 X 89 222 410 Bronze Bush $ 94 P89G326 A2U130-193210 PIN $ 370
BB 83 G64 X 89 A2U130-19436 Bronze Bush $ 94 P89G338 A2U220-193445 PIN $ 294
BB 95 G76X127 222 413 Bronze Bush $ 148 P89 - 541 A2U130-193434 PIN $ 492
P89 - 541 222 400 (was P89-542) PIN $ 492
N171 - 74T38 A2U130-196152 NUT $ 214
N178 - 88T38 A2U220-196134 NUT $ 274
PG51G115M A2U130-193380 PIN $126
PG51G121M A2U130-193336 PIN $126
P102 - 420M 238 040 PIN $ 580
PG51G127M A2U220-193388 PIN $126
P102 - 421M A2U130-193431 PIN $ 580
PG51 - 161P A2U220-193397 PIN $150
P102G229 913-540003 PIN $ 598
P102G229 6480 2959 PIN $ 598 R229-114-19 242 346 RETAINER $ 235
P102G240TP A2U220-193387 PIN $ 580

Minimum $150
KSet
KSetEngineering
EngineeringPty
PtyLtd
Ltd 3333Johnson
Johnson

Street
StreetMaitland
MaitlandNSW
NSW2320
2320
Phone
Phone
applies
02024932
before
49323530
3530
GSTFax:
Fax:
& Freight
02024932
49323100
3100Email:
Email:
sales@kset.com.au
sales@kset.com.au Page
Page5645November
November2013
2013
Located
Located
in in
thethe
Newcastle
Newcastle
- Sydney
- SydneyRegion
Region- Australia
- Australia
 K-SET PARTS
WELL-FIT Aftermarket Parts to suit - JOHN DEERE Graders - Loaders - Scrapers
TO SUIT
JOHN DEERE GRADERS SCRAPERS BACK-HOE LOADERS
QTY PART No. PRICE QTY PART No. PRICE QTY PART No. PRICE QTY PART No. PRICE QTY PART No. PRICE
EX GST EX GST EX GST EX GST EX GST
7 U10616 25
2 AT101652 $ 27 7 R36156 $ 81 4 T125922 $ 132 3 T34502 $ 36 7 U10618 $ 24
4 AT113989 130 60 R51731 20 9 T125924 35 19 T34529 36 29 U10666 21
AT117170 520 41 R56188 20 22 T125926 86 1 T36212 86 9 U10699 15
2 AT133325 58 52 R72579 31 1 T125935 74 4 T37598 $ 35 12 U10745 24
5 AT13504 50 47 R72700 23 1 T125936 88 2 T38505 49 16 U11013 15
22 AT143533 86 9 R80276 63 8 T125937 42 12 T40586 74 99 U11649 3

9 AT150666 80 4 R81488 37 4 T125938 50 9 T41965 CONNECTOR 99 99 U11650 3

2 AT162992 150 12 R81491 31 2 T125939 125 20 T40637 50 3 U12210 23
2 AT162996 145 12 R81849 40 2 T125943 74 6 T41968 TIE ROD 130 40 U12271 22
20 AT164442 120 33 R81850 44 2 T125945 85 12 T41966 STG YOKE 150 19 U12817 $ 40
1 AT167601 250 4 R81852 37 2 T125946 40 12 T41967 STG YOKE 150 13 U13484 20
1 AT25333 218 12 R81853 45 9 T126201 54 16 T41972 50 11 U14111 20
36 AT34906 14 84 R81854 22 33 T126935 67 12 T41973 52 39 U15815 31
1 AT35345 110 19 R81971 59 99 T126936 30 60 T42080 28 8 U15822 36
20 AT36108 14 R81968 49 4 T127311 36 3 T42509 40 4 U16051 44
13 AT36110 14 19 R81989 16 3 T127437 65 5 T42622 36 6 U16055 24
AT37757 93 8 R82074 38 14 T127644 43 3 T42460 56 19 U16878 25
4 AT40745 120 14 R82075 72 16 T127673 76 3 T43502 36 1 U16963 36
5 AT41007w 56 9 R82076 63 5 T127791 40 7 T43808 280 10 U17170 26
1 AT41245 120 17 R82077 72 31 T128309 66 4 T43808 PIN, ARTIC 480 6 U17220 25
14 AT57024 430 34 R82942 34 8 T128531 16 5 T44275 80 13 U17221 22
1 AT72919 74 3 R82960 43 7 T128532 16 9 T44314 36 11 U40304 27
2 AT78638 90 1 R84376 38 8 T128533 19 5 T44315 78 5 U40305 26
AT83003 150 22 R84378 72 12 T128534 21 39 T46664 23 13 U40306 22
9 AT86420 80 18 R85884$29 2 T129855 76 10 T46667 26 41 U40308 19
4 AT86422 74 8 R89940 48 8 T133618 20 1 T46715 64 2 U40312 27
3 AT86423 44 10 R90767 44 8 T135380 66 99 T47070 30 19 U40431 21
16 AT86426 106 5 R98953 36 3 T139951 34 99 T48203 23 9 U40671 20
18 AT86429 50 15 R99444 25 38 T140207 20 49 T48206 26 11 U40831 85
10 AT90334 73 10 R97724 34 76 T140669 24 6 T48365 35 4 U40833 170
18 AT90338 52 13 R97726 46 1 T142072 24 11 T49220 38 8 U41078 50
8 AT90341 49 10 T100188 46 4 T141286 132 43 T50063 87 12 U41088 65
5 AT90342 54 4 T100189 74 1 T142121 96 3 T50719 65 51 U41089 $ 18
12 AT90343 $ 52 98 T100240 $ 38 9 T142482 $ 50 4 T51859 26 14 U41250 24
20 AU11099 36 4 T100241 41 4 T143106 73 4 T52032 $ 56 39 U41936 16
10 AU11661 33 23 T100252 67 3 T143647 88 3 T52036 85 14 U41963 18
2 AU13296 44 16 T100289 49 16 T145346 43 24 T54081 49 1 U42130 340
2 AU13551 55 9 T100306 80 5 T148335 32 45 T56213 59 5 U42161 126
2 AU13559 68 6 T100339 36 4 T154057 46 4 T56317 38 24 U44219 13
1 AU14012 36 24 T154058 27 9 T56320 STG YOKE 300 3 U42421 24
6 AU40455 46 T100762 38 8 T154165 49 4 T58218 39 18 U42446 52
2 AU41396 74 17 T100763 16 10 T154166 50 19 T59506 46 3 U42447 54
22 AU42333 86 2 T100828 125 29 T154277 26 5 T64490 75 7 U42448 33
4 AU42334 74 4 T100910 50 5 T158612 60 9 T67205 22 7 U42449 39
9 AU42537CONNECTOR 70 10 T101084 45 16 T159279 16 14 T67855 49 6 U42450 30
AU43088 120 T101148 46 20 T162581 40 2 T68041 27 13 U42451 28
8 CHAM14045 22 39 T101391 40 14 T162582 49 32 T68270 WEAR RAIL 84 2 U42457 10
12 CHAM25005 23 4 T105663 146 21 T18838 27 54 T69354 42 23 U42465 32
4 CHAM39591 25 17 T105677 99 11 T22438 35 3 T70421 50 3 U42477 36
CHAM4012 27 15 T105930 54 44 T25875 24 5 T71654 34 1 U42519 27
10 CHAM42513 62 20 T105987 29 5 T27123 100 2 T75414 34 6 U42733 25
4 CHAM42541 120 1 T105988 18 2 T29414 50 20 T76309 58 32 U42736 29
6 CHAM44518 116 5 T106092 56 4 T29624 120 37 T76637 48 8 U42738 25
16 CHAM50021 28 1 T106493 78 11 T29885 19 99 T76639 26 7 U42739 22
4 CHAM51220 22 1 T113135 36 11 T33141 19 4 T77368 70 4 U43383 36
56 CHAM51662 29 6 T113331 110 13 T33536 15 3 T77394 95 33 U43495 16
15 CHAM62243 26 16 T113755 20 4 T33659 42 6 T77413 60 2 U43498 34
18 H144296 47 10 T113756 21 20 T33688 15 1 T77500 240 2 U43508 WEAR RAIL 700
34 H145069 29 24 T114515 26 8 T33689 20 9 T79849 40 98 U43636 27
34 H145104 34 9 T114797 STG YOKE 300 4 T34097 30 4 T79866 132
16 T81452 28 3 U43959 $ 26
6 H145121 $ 29 4 T120172 $ 70 20 T34259 $ 20 6 U44043 70
2 H145630 35 4 T120177 75 64 T34301 26 43 T82143 $ 87 11 U44332 32
H148881 33 4 T120179 86 2 T34374 240 2 T82333 WEAR RAIL 700 6 U46436 84
15 H149680 28 9 T121987 54 10 T34414 23 12 T82886 36 5 U46702 80
48 N134562 13 2 T122077 56 15 T34423 34 6 T90076 116 2 U46745 38
45 R124230 15 5 T124495 35 5 T34428 40 23 U10481 17 23 Y1951CU 19
86 R125754 15 13 T125914 36 4 T34485 36 17 U10482 20

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320

Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 57 November 2013
 PINS & BUSHES TO SUIT MISC. WORKING ENDS

H Pin, Links to Bkt Cyl

Bush, Bkt Cyl to Rod End
Bush, Bucket Link (2)

Pin, Arm to Link

Bush (2), Arm to Links

J Pin, Bucket to Arm

Bush Arm to Bucket Pin (2

K Pin, Bucket to H-link

Bush Bkt Link - Bkt Pin (2)

KATO HD700 KATO HD1220

HD700-PIN-H (1) $ 360 HD1220-PIN-H (1) $ 506
HD700-BUSH-HR (1) $ 153 HD1220-BUSH-HR (1) $ 210
HD700-BUSH-HL (2) $ 176 HD1220-BUSH-HL (2) $ 168
HD700-PIN- (1) $ 360 HD1220-PIN- (1) $ 478
HD700-BUSH- (2) $ 138 HD1220-BUSH- (2) $ 138
HD700-PIN-J (1) $ 330 HD1220-PIN-J (1) $ 370
HD700-BUSH-J (2) $ 138 HD1220-BUSH-J (2) $ 240
HD700-PIN-K (1) $ 275 HD1220-PIN-K (1) $ 370
HD700-BUSH-K (2) $ 140 HD1220-BUSH-K (2) $ 240

IHI 35J KUBOTA KX045

H 35J-PIN-H (1) $ 165 KX045-PIN-H (1) $ 216
H 35J-BUSH-HR (1) $ 38 KX045-BUSH-HR (1) $ 64
H 35J-BUSH-HL (2) $ 28 KX045-BUSH-HL (2) $ 38
H 35J-BUSH-GL (1) $ 38
KX045-PIN- (1) $ 170
H 35J-PIN- (1) $ 130 KX045-BUSH- (2) $ 62
H 35J-BUSH- (2) $ 32
KX045-PIN-J (1) $ 142
H 35J-PIN-J (1) $ 135 KX045-BUSH-J (2) $ 62
H 35J-BUSH-J (2) $ 32
KX045-PIN-K (1) $ 142
H 35J-PIN-K (1) $ 135 KX045-BUSH-K (2) $ 62
H 35J-BUSH-K (2) $ 32

KSet
KSetEngineering
EngineeringPty
PtyLtd
Ltd 3333Johnson
JohnsonStreet
StreetMaitland
MaitlandNSW
NSW2320
2320
Phone
Phone02024932
49323530
3530Fax:
Fax:02024932
49323100
3100Email:
Email:
sales@kset.com.au
sales@kset.com.au Page
Page5845
58November
November2013
2013
Located
Located
in in
thethe
Newcastle
Newcastle
- Sydney
- SydneyRegion
Region- Australia
- Australia
 PINS AND BUSHES TO SUIT MINI EXCAVATORS

SUIT KOBELCO SUIT YANMAR

SK045 VIO 50

Description K-Set Part Price Ea K-Set Part Price Ea

A PIN, BOOM TO FRAME SK045-PIN-A $158 VIO 50-PIN-A $ 144

BUSH (2) SK045-BUSH-A $ 60 VIO 50-BUSH-A $ 70
B PIN, BOOM CYL TO FRAME SK045-PIN-B $187 VIO 50-PIN-B $ 106
BUSH SK045-BUSH-B $ 89 VIO 50-BUSH-B $ 64
C PIN, BOOM CYL TO BOOM SK045-PIN-C $146 VIO 50-PIN-C $ 106
BUSH SK045-BUSH-C $ 51 VIO 50-BUSH-C $ 64
D PIN, ARM CYL TO BOOM SK045-PIN-D $182 VIO 50-PIN-D $ 106
BUSH SK045-BUSH-D $ 49 VIO 50-BUSH-D $ 47
E PIN, ARM CYL ARM SK045-PIN-E $136 VIO 50-PIN-E $ 104
BUSH SK045-BUSH-E $ 49 VIO 50-BUSH-E $ 47
F PIN, BOOM TO ARM SK045-PIN-F $190 VIO 50-PIN-F $ 144
BUSH (2) SK045-BUSH-F $ 60 VIO 50-BUSH-F $ 70
G PIN, BUCKET CYL TO ARM SK045-PIN-G $110 VIO 50-PIN-G $ 85
BUSH SK045-BUSH-G $ 42 VIO 50-BUSH-G $ 38
H PIN, BBKT TO LINKS SK045-PIN-H $198 VIO 50-PIN-H $ 150
BUSH, BKT CYL / ROD END SK045-BUSH-HR $ 42 VIO 50-BUSH-HR $ 47
BUSH, DUMP LINK (2) SK045-BUSH-HL $ 32 VIO 50-BUSH-HL $ 37
PIN, ARM TO LINK SK045-PIN- $198 VIO 50-PIN- $ 180
BUSH (2) SK045-BUSH- $ 62 VIO 50-BUSH- $ 62
J,K PIN, BUCKET (2) SK045-PIN-JK $210 VIO 50-PIN-JK $ 200
BUSHINGS BUCKET (4) SK045-BUSH-JK $ 60 VIO 50-BUSH-J $ 149
BUSH, BKT / LINK (2) VIO 50-BUSH-K $ 62
TU PIN, SWING TOWER (TOP) SK045-PIN-TU $150
BUSH, TOP & LOWER (2) SK045-BUSH-T $ 80
TL PIN, SW. TOWER LOWER SK045-BUSH-TL $146
TD PIN, TOWER / DOGBONE (2) SK045-PIN-TD $139
BUSH, DOGBONE (2 ) SK045-BUSH-TD $92
SL PIN, SWING LEVER (2) SK045-PIN-SL $ 170
BUSH, SW. CYL TO LEVER SK045-BUSH-SL $ 92
SP PIN, SWING LEVER PIVOT SK045-PIN-SP $ 170
BUSH (2) SK045-BUSH-SP $ 60
SF PIN, SWING CYL TO FRAME SK045-PIN-SF $ 170

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320 Office Copy
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 59 November 2013
Located in the Newcastle - Sydney Region - Australia
 PINS & BUSHES TO SUIT KOBELCO WORKING ENDS
SK060 SK250, SK260 SK330

SK250
SK060 SK260 SK330

Description KSet Part Price Ea KSet Part Price Ea KSet Part Price Ea

H PIN, BKT To LINKS SK060-PIN-H $182 SK250-PIN-H $ 490 SK330-PIN-H $ 510

SUPER PIN for HAMMER SK060-PIN-HAM $ 264 K250-PIN-HAM $ 598 SK330-PIN-HAM $ 784
BUSH, BKT CYL To ROD END SK060-BUSH-HR $ 66 SK250-BUSH-HR $ 139 SK330-BUSH-HR $ 210
BUSH, DUMP LINK (2) SK060-BUSH-HL $ 44 SK250-BUSH-HL $ 139 SK330-BUSH-HL $ 198

PIN, ARM To LINK SK060-PIN- $182 SK250-PIN- $ 480 SK330-PIN- $480

BUSH (2) SK060-BUSH- $ 60 SK250-BUSH- $ 110 SK330-BUSH- $151

J,K PIN, BUCKET (2) SK060-PIN-JK $110 SK250-PIN-J,K $ 475 SK330-PIN-JK $540
BUSHINGS BUCKET (4) SK060-BUSH-J $ 60 SK250-BUSH-J $ 340 SK330-BUSH-J $210
BUSH, BKT / LINK (2) SK060-BUSH-K $ 64 SK250-BUSH-K $ 106 SK330-BUSH-K $170

KSet
KSetEngineering
EngineeringPty
PtyLtd
Ltd 3333Johnson
JohnsonStreet
StreetMaitland
MaitlandNSW
NSW2320
2320
Phone
Phone02024932
49323530
3530Fax:
Fax:02024932
49323100
3100Email:
Email:
sales@kset.com.au
sales@kset.com.au Page
Page6060November
November2013
2013
Located in the Newcastle - Sydney Region - Australia
 PINS & BUSHES ,0."546

1$
TO SUIT
AND WORKING ENDS FOR 1$

1$66

1$ 1$

1$66
DESCRIPTION PART No. Price each PART No. Price each
A PIN, BOOM TO FRAME PC45-PIN-A $ 180 PC75UU-PIN-A
BUSH (2) PC45-BUSH-A $ 70 PC75UU-BUSH-A

B PIN, BOOM CYL TO FRAME PC45-PIN-B $ 122 PC75-PIN-B

BUSH PC45-BUSH-B $ 64 PC75-BUSH-B

C PIN, BOOM TO BOOM CYL PC45-PIN-C $ 162 PC75-PIN-C

BUSH (2) PC45-BUSH-C $ 62 PC75-BUSH-C

D PIN, BOOM TO ARM CYL PC45-PIN-D $ 148 PC75-PIN-D

BUSH (1) PC45-BUSH-D $ 38 PC75-BUSH-D

E PIN, ARM TO ARM CYL PC45-PIN-E $ 126 PC75-PIN-E

BUSH (1) PC45-BUSH-E $ 38 PC75-BUSH-E

F PIN, BOOM TO ARM PC45-PIN-F $ 152 PC75-PIN-F

BUSH (2) PC45-BUSH-F $ 60 PC75-BUSH-F

G PIN, ARM TO BKT CYL PC45-PIN-G $ 105 PC75-PIN-G

BUSH (1) PC45-BUSH-G $ 42 PC75-BUSH-G

H PIN, LINKS TO BKT CYL PC45-PIN-H $ 194 PC75UU-PIN-H $ 190

PIN, FOR HAMMER PC45-PIN-HAM $ 296 PC75UU-PIN-HAM $ 280
BUSH, BKT CYL ROD END (1) PC45-BUSH-HR $ 42 PC75UU-BUSH-HR $ 88
BUSH, H LINK (2) PC45-BUSH-HL $ 60 PC75UU-BUSH-HL $ 86

PIN, ARM TO LINKS PC45-PIN- $ 194 PC75UU-PIN- $ 246

BUSH (2), ARM TO LINKS PC45-BUSH- $ 60 PC75UU-BUSH- $ 59

J PIN, BKT TO ARM PC45-PIN-J $ 118 PC75UU-PIN-J $ 192

BUSH, ARM TO BKT PIN (2) PC45-BUSH-J $ 154 PC75UU-BUSH-J $ 130

K PIN, BKT TO H-LINK PC45-PIN-K $ 118 PC75UU-PIN-K $ 192

BUSH, H-LINK TO BKT PIN (2) PC45-BUSH-K $ 62 PC75UU-BUSH-K $ 49

TU PIN, SWING TOWER (TOP) PC45-PIN-TU $ 380

BUSH,SWING TOWER PC45-BUSH-TU $ 164

TL PIN, TOWER LOWER PC45-PIN-TL $ 255

BUSH,SWING TOWER PC45-BUSH-TL $ 164

S PIN, SWING CYLINDER PC45-PIN-S $ 122

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW18-04-2013
Page 57NSW
2320
2320
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 61
61 November
November 2013
2013
Located in the Newcastle - Sydney Region - Australia
 PINS & BUSHES To Suit KOMATSU PC120
and Working Ends for PC150 & PC128US

Description Kgs K-Set Part No. Price Each Notes

Excl. GST

A PIN, BOOM TO FRAME 22 PC120-PIN-A $ 425

BUSH (2) 1.2 PC120-BUSH-A $ 109
B PIN, BOOM CYL TO FRAME (2) 7 PC120-PIN-B $ 164
BUSH (2) 1 PC120-BUSH-B $ 101
C PIN, BOOM CYL TO BOOM 20 PC120-PIN-C $ 368
BUSH (2) 1 PC120-BUSH-C $ 101
D PIN, ARM CYL TO BOOM 7 PC120-PIN-D $ 197
BUSH (1) 1 PC120-BUSH-D $ 99
E PIN, ARM CYL TO ARM 7 PC120-PIN-E $ 220
BUSH (1) 1 PC120-BUSH-E $ 99
F PIN, BOOM TO ARM 13 PC120-PIN-F $ 280
BUSH (2) 1.1 PC120-BUSH-F $ 103
G PIN, BUCKET CYL TO ARM 6 PC120-PIN-G $ 177
BUSH (1) 0.9 PC120-BUSH-G $ 97
H PIN, BUCKET CYL TO LINKS 10 PC120-PIN-H $ 360
BUSH, BKT CYL ROD END (1) 0.8 PC120-BUSH-HR $ 94
BUSH, DUMP LINK (2) 0.7 PC120-BUSH-HL $ 90
PIN, ARM TO GUIDE LINKS 8 PC120-PIN- $ 290
BUSH (2) 0.8 PC120-BUSH- $ 88
J PIN, BUCKET TO ARM 10 PC120-PIN-J $ 235
BUSH, ARM TO BKT PIN (2) 1.8 PC120-BUSH-J $ 132
K PIN, BUCKET TO LINKS 10 PC120-PIN-K $ 235
BUSH, DUMP LINKS / BKT (2) 1.1 PC120-BUSH-K $ 112

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320

Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 62 November 2013
Located in the Newcastle - Sydney Region - Australia
 PINS & BUSHES TO SUIT KOMATSU PC200 PC220
PC228U PC250

PC200, PC228U PC220, PC250

Description Kg Part No. Price Ea Kg Part No. Price Ea
Excl. GST Excl. GST

A PIN, BOOM TO FRAME 45 PC200-PIN-A $ 630 53 PC220-PIN-A $ 798

PC200-3-PIN-A $ 530 PC220-3-PIN-A $ 652

BUSH (2) 2.3 PC200-BUSH-A $ 242 2.5 PC220-BUSH-A $ 286

PC200-3-BUSH-A $ 230 PC220-3-BUSH-A $ 242

B PIN, BOOM CYL TO FRAME (2) 9 PC200-PIN-B $ 218 10 PC220-PIN-B $ 278

BUSH (2) 1.2 PC200-BUSH-B $ 120 1.3 PC220-BUSH-B $ 156

C PIN, BOOM TO BOOM CYL 32 PC200-PIN-C $ 492 32 PC220-PIN-C $ 492

BUSH (2) 1.3 PC200-BUSH-C $ 156 1.4 PC220-BUSH-C $ 156

D PIN, BOOM TO ARM CYL 11 PC200-PIN-D $ 264 11 PC220-PIN-D $ 264

BUSH (1) 1.3 PC200-BUSH-D $ 156 1.4 PC220-BUSH-D $ 156

E PIN, ARM TO ARM CYL 11 PC200-PIN-E $ 264 11 PC220-PIN-E $ 264

BUSH (1) 1.3 PC200-BUSH-E $ 156 1.4 PC220-BUSH-E $ 156

F PIN, BOOM TO ARM 27 PC200-PIN-F $ 478 27 PC220-PIN-F $ 478

BUSH (2) 1.2 PC200-BUSH-F $ 140 1.2 PC220-BUSH-F $ 140

G PIN, ARM TO BKT CYL 9 PC200-PIN-G $ 218 11 PC220-PIN-G $ 264

BUSH (1) 1.2 PC200-BUSH-G $ 120 1.4 PC220-BUSH-G $ 156

H PIN, LINKS TO BKT CYL 15 PC200-PIN-H $ 330 18 PC220-PIN-H $ 360

PIN, FOR HAMMER PC200-PIN-HAM $ 520 18 PC220-PIN-HAM $ 580
BUSH, BKT CYL ROD END (1) 0.9 PC200-BUSH-HR $ 110 1.2 PC220-BUSH-HR $ 97
BUSH, H LINK (2) 0.9 PC200-BUSH-HL $ 110 1.4 PC220-BUSH-HL $ 122

PIN, ARM TO LINKS 15 PC200-PIN- $ 330 18 PC220-PIN- $ 360

BUSH (2), ARM TO LINKS 1.2 PC200-BUSH- $ 118 1.2 PC220-BUSH- $ 128

J PIN, BKT TO ARM 22 PC200-PIN-J $ 408 22 PC220-PIN-J $ 408

BUSH, ARM TO BKT PIN (2) 2 PC200-6-BUSH-J $ 154 3.2 PC220-6-BUSH-J $ 154
BUSH, DASH 7 3.4 PC200-7-BUSH-J $ 185 3.4 PC220-7-BUSH-J $ 185

K PIN, BKT TO H-LINK 22 PC200-PIN-K $ 408 22 PC220-PIN-K $ 408

BUSH, H-LINK TO BKT PIN (2) 1.4 PC200-BUSH-K $ 159 1.4 PC220-BUSH-K $ 159
Q PIN, QUICK HITCH 80 DIA x 500mm 20 PC200-PIN-Q $ 276 20 PC220-PIN-Q $ 276

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 63
63 November
November 2013
2013
Located in the Newcastle - Sydney Region - Australia
 PINS & BUSHES TO SUIT KOMATSU PC300 PC400
PC350 PC450

PC300 / 350 PC400 / 450

Description kg Part No. Price Ea kg Part No. Price Ea
Excl. GST Excl. GST

A PIN, BOOM TO FRAME 76 PC300-PIN-A $ 880 94 PC400-PIN-A $ 1198

BUSH (2) 3 PC300-BUSH-A $ 286 4 PC400-BUSH-A $ 350
B PIN, BOOM CYL TO FRAME (2) 15 PC300-PIN-B $ 280 21 PC400-PIN-B $ 398
BUSH (2) 1.6 PC300-BUSH-B $ 140 2.1 PC400-BUSH-B $ 140
C PIN, BOOM TO BOOM CYL 58 PC300-PIN-C $ 790 75 PC400-PIN-C $ 880
BUSH (2) 2 PC300-BUSH-C $ 140 2.5 PC400-BUSH-C $ 244
D PIN, BOOM TO ARM CYL 18 PC300-PIN-D $ 340 28 PC400-PIN-D $ 480
BUSH (1) 2 PC300-BUSH-D $ 140 2.5 PC400-BUSH-D $ 244
E PIN, ARM TO ARM CYL 18 PC300-PIN-E $ 340 24 PC400-PIN-E $ 440
BUSH (1) 2 PC300-BUSH-E $ 140 2.5 PC400-BUSH-E $ 244
F PIN, BOOM TO ARM 45 PC300-PIN-F $ 588 56 PC400-PIN-F $ 870
BUSH (2) 2.1 PC300-BUSH-F $ 246 2.6 PC400-BUSH-F $ 272
G PIN, ARM TO BKT CYL 15 PC300-PIN-G $ 286 18 PC400-PIN-G $ 410
BUSH (1) 1.7 PC300-BUSH-G $ 130 2.3 PC400-BUSH-G $ 140
H PIN, LINKS TO BKT CYL 27 PC300-PIN-H $ 430 36 PC400-PIN-H $ 690
PIN, HD H4140 FOR HAMMER 27 PC300-PIN-HAM $ 680 36 PC400-PIN-HAM $ 960
BUSH, BKT CYL ROD END (1) 1.5 PC300-BUSH-HR $ 130 2.3 PC400-BUSH-HR $ 140
BUSH, H LINK (2) 1.6 PC300-BUSH-HL $ 130 2.1 PC400-BUSH-HL $ 140
PIN, ARM TO LINKS 27 PC300-PIN- $ 430 36 PC400-PIN- $ 690
BUSH (2), ARM TO LINKS 1.6 PC300-BUSH- $ 130 1.9 PC400-BUSH- $ 160
J PIN, BKT TO ARM 30 PC300-PIN-J $ 460 40 PC400-PIN-J $ 690
BUSH, ARM TO BKT PIN (2) 3.2 PC300-BUSH-J $ 228 4.2 PC400-BUSH-J $ 270
BUSH, DASH 7 (2) 4.2 PC300-7-BUSH-J $ 280 4.7 PC450-8-BUSH-J $ 340
K PIN, BKT TO H-LINK 30 PC300-PIN-K $ 460 40 PC400-PIN-K $ 690
BUSH, H-LINK TO BKT PIN (2) 1.6 PC300-BUSH-K $ 130 2.1 PC400-BUSH-K $ 140
Q PIN, QUICK HITCH 90 DIA x 555mm PC350-PIN-Q $ 360
SHIMS & SEALS; See Page 29

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 64
64 November
November 2013
2013
Located in the Newcastle - Sydney Region - Australia
 Pins & Bushes to Suit
KOMATSU PC600 PC800 PC1250 Working Ends

Location Description

H Pin, Links to Bkt Cyl

Bush, Bkt Cyl to Rod End
Bush, Bucket Link (2)

Pin, Arm to Link

Bush (2), Arm to Links

J Pin, Bucket to Arm

Bush Arm to Bucket Pin (2)

K Pin, Bucket to H-Link

Bush Bkt Link - Bkt Pin (2)

PC600 -8 PC1100 -6
KSet Part No. Qty Price ea KSet Part No. Qty Price ea
plus GST plus GST

PC600-PIN-H (1) $ 890 PC1100 -PIN-HR (1) $

PC600-BUSH-HR (1) $ 264 PC1100 -PIN-HL (1) $
PC600-BUSH-HL (2) $ 330 PC1100 -BUSH-HR (2) $
PC1100 -BUSH-HL (2) $ 480
PC600-PIN- (1) $ 890
PC600-BUSH- (2) $ 244 PC1100 -PIN- (1) $
PC1100 -BUSH- (2) $ 480
PC600-PIN-J (1) $ 1,340
PC600-BUSH-J (2) $ 380 PC1100 -PIN-J (1) $
PC1100 -BUSH-J (2) $ 1360
PC600-PIN-K (1) $ 1,260
PC600-BUSH-K (2) $ 380 PC1100 -PIN-K (1) $ 1950
PC1100 -BUSH-K (2) $ 480

PC800 -6 PC1250 -8
KSet Part No. Qty Price ea KSet Part No. Qty Price ea
plus GST plus GST
PC1250-PIN-HR (1) $
PC800-PIN-H (1) $ PC1250-PIN-HL (1) $
PC800-BUSH-HR (1) $ PC1250-BUSH-HR (2) $
PC800-BUSH-HL (2) $ PC1250-BUSH-HL (2) $ 480
PC800-PIN- (1) $ PC1250-PIN- (1) $
PC800-BUSH- (2) $ 380 PC1250-BUSH- (2) $ 480
PC800-PIN-J (1) $ PC1250-PIN-J (1) $ 2,150
PC800-BUSH-J (2) $ 670 PC1250-BUSH-J (2) $ 1,360
PC800-PIN-K (1) $ PC1250-PIN-K (1) $ 1,950
PC800-BUSH-K (2) $ 380 PC1250-BUSH-K (2) $ 480

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 65
65 November
November 2013
2013
Located in the Newcastle - Sydney Region - Australia
 PINS & BUSHES TO SUIT KOMATSU WHEEL - LOADERS

WA350
WA320 WA380 WA420 WA450 WA470
Description K-Set Part Price ea K-Set Part Price ea K-Set Part Price ea
Number Excl. GST Number Excl. GST Number Excl. GST

A Pin, Frame to Lift Arm WA320-PIN-A $ 345 WA420-PIN-A $ 460 WA470-PIN-A $ 735
Bush (2) WA320-BUSH-A 140 WA420-BUSH-A 200 WA470-BUSH-A 170

B Pin, Frame to Lift Cyl (2) WA320-PIN-B $ 310 WA420-PIN-B $ 440 WA470-PIN-B $ 710
Bush (2) WA320-BUSH-B 99 WA420-BUSH-B 128 WA470-BUSH-B 195

C Pin, Lift Cyl to Lift Arm (2) WA320-PIN-C $ 235 WA420-PIN-C $ 420 WA470-PIN-C $ 640
Bush (2) WA320-BUSH-C 99 WA420-BUSH-C 160 WA470-BUSH-C 195

D Pin, Dump Cyl Lift Arm (1) WA320-PIN-D $ 410 WA420-PIN-D $ 568 WA470-PIN-D * $ 605
Bush (1) WA320-BUSH-D 124 WA420-BUSH-D 186 WA470-BUSH-D 195

E Pin, Tilt Lever to Cyl (1)
Bush (1)
WA320-PIN-E
WA320-BUSH-E
$ 375
124
WA420-PIN-E
WA420-BUSH-E
$ 495
186
WA470-PIN-E
WA470-BUSH-E
$ 605
186

F Pin, Centre Tilt Lever (1)
Bush (2)
WA320-PIN-F
WA320-BUSH-F
$ 470
160
WA420-PIN-F
WA420-BUSH-F
$ 724
360
WA470-PIN-F
WA470-BUSH-F
$ 968
190

Pin, Link to Tilt Lever (1) WA320-PIN-L $ 244 WA420-PIN-L $ 316 WA470-PIN-L $ 426
L
Bush (1) WA320-BUSH-L 117 WA420-BUSH-L 168 WA470-BUSH-L 210

K Pin, Bucket to Link (1)

Bush (1)
WA320-PIN-K
WA320-BUSH-K
$ 244
117
WA420-PIN-K
WA420-BUSH-K
$ 316
168
WA470-3-PIN-K $ 426
WA470-BUSH-K 210

J Pin, Bucket to Lift Arm (2)

Bush (2)
WA320-PIN-J
WA320-BUSH-J
$ 270
102
WA420-PIN-J
WA420-BUSH-J
$ 316
160
WA470-3-PIN-J $ 404
WA470-BUSH-J 172

Pin, Steering Cyl (4) WA320-PIN-S WA420-PIN-S $ 156 WA470-PIN-S $ 149

S Bush (4) WA320-BUSH-S WA420-BUSH-S 45 WA470-BUSH-S $ 72
WA470-PIN-5-D $ 646

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 66
66 November
November 2013
2013
Located in the Newcastle - Sydney Region - Australia
 PINS & BUSHES TO SUIT KOMATSU WHEEL - LOADERS

WA480 -5 WA500-1, -3, -6 WA600 -1, -3

Description K-Set Part Price $ K-Set Part Price $ K-Set Part Price $
Number Excl. GST Number Excl. GST Number Excl. GST

A Pin, Frame to Lift Arm WA480-PIN-A 710 WA500-PIN-A 820 WA600-PIN-A 1320
Bush (2) WA480-BUSH-A 180 WA500-BUSH-A 310 WA600-BUSH-A 280

B Pin, Frame to Lift Cyl (2) WA480-PIN-B 710 WA500-PIN-B 820 WA600-PIN-B 1320
Bush (2) WA480-BUSH-B 180 WA500-BUSH-B 244 WA600-BUSH-B 280

C Pin, Lift Cyl to Lift Arm (2) WA480-PIN-C 640 WA500-PIN-C 740 WA600-PIN-C 815
Bush (2) WA480-BUSH-C 200 WA500-BUSH-C 244 WA600-BUSH-C 240

D Pin, Dump Cyl - Lift Arm (1) WA480-PIN-D 740 WA500-PIN-D 740 WA600-PIN-D 1030
Bush (1) WA480-BUSH-D 284 WA500-BUSH-D 284 WA600-BUSH-D 280

E Pin, Tilt Lever to Cyl (1) WA480-PIN-E 740 WA500-PIN-E 740 WA600-PIN-E 1090
Bush (1) WA480-BUSH-E 284 WA500-BUSH-E 284 WA600-BUSH-E 280

F Pin, Centre Tilt Lever (1) WA480-PIN-F 1080 WA500-PIN-F 1294 WA600-PIN-F 2890
Bush (Check Qty) WA480-BUSH-F 190 WA500-BUSH-F 520 WA600-BUSH-F 440

L Pin, Link to Tilt Lever (1) WA480-PIN-L 568 WA500-PIN-L, K 568 WA600-PIN-L 960
Bush (1) WA480-BUSH-L 274 WA500-BUSH-L, K 268 WA600-BUSH-L 292

K Pin, Bucket to Link (1) WA480-PIN-K 568 WA500-6-PIN-L, K 610 WA600-PIN-K 980
Bush (1) WA480-BUSH-K 274 WA500-6-BUSH-L,K 268 WA600-BUSH-K 480
WA600-1-BUSH-K (2) 390
WA500-6-PIN-J 785
J Pin, Bucket to Lift Arm (2) WA480-PIN-J 620 WA500-PIN-J 620 WA600-3-PIN-J 960

Bush (Ckeck Qty) WA480-BUSH-J 274 WA500-BUSH-J 330 WA600-BUSH-J 366

WA500-6-BUSH-J 340

S Pin, Steering Cyl (4) WA480-PIN-S 149 WA500-PIN-S 172 WA600-PIN-S

Bush (4) WA480-BUSH-S 72 WA500-BUSH-S 82 WA600-BUSH-S

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 67
67 November
November 2013
2013
Located in the Newcastle - Sydney Region - Australia
 Alpha High Speed Steel Drills & Taps

CODE Price each Description 6 Pack Code 6 Pack Price Ex GST

TL-9CD4-516 $ 9 $4.57, 25/24pa Centre Drill HSS #4 5/16” Diameter TL6-9CD4-516 $ 43 /6
TL-9CD5-716 $15 $7.38, 30/40pa Centre Drill HSS #5 7/16” Diameter TL6-9CD5-716 $ 68 /6

TL-9ELI1132 $20 $9.86, 6/6pa 11/32” Long Series Drill Bit HSS 115mm flute TL6-9ELI1132 $ 89 /6
TL-NPSFCB18 $22 $10.58, 0/12pa Carbon Tap 1/8” NPSF Bottoming TL6-NPSFCB18 $ 98 /6

TL-9LM050Co $7 $3.24, 5/30pa 5.0mm Cobalt Jobber Drill TL6-9LM050Co $ 30 /6

TL-9LM060Co $9 $4.33, 9/20pa 6.0mm Cobalt Jobber Drill TL6-9LM060Co $ 42 /6

TL-9LM032 $2 $1, 43/14pa 3.2mm Jobber Drill Bit HSS = 1/8” Dia TL6-9LM032 $ 9 /6
TL-9LM048 $3 $1.45, 48/3pa 4.8mm Jobber Drill Bit HSS = 3/16” Dia TL6-9LM048 $ 13 /6
TL-9LM051 $3 $1.52, 19/0pa 5.1mm Jobber Drill Bit HSS for M6x1.0 Tap TL6-9LM051 $ 13 /6
TL-9LM063 $4 $2.12, 35/10pa 6.3mm Jobber Drill Bit HSS = 1/4” Dia TL6-9LM063 $ 20 /6
TL-9LM068 $5 $2.31, 50/8pa 6.8mm Jobber Drill Bit HSS for M8x1.25 Tap TL6-9LM068 $ 24 /6
TL-9LM079 $7 $3.50, 0/0pa 7.9mm Jobber Drill Bit HSS = 5/16” Dia TL6-9LM079 $ 35 /6

TL-9LM095 $ 9 $4.76, 26/6pa 9.5mm Jobber Drill Bit HSS = 3/8” Dia TL6-9LM095 $ 45 /6
TL-9LM102 $11 $5.35, 7/6pa 10.2mm Jobber Drill Bit HSS for M12x1.75 Tap TL6-9LM102 $ 55 /6
TL-9LM111 $12 $6.15, 20/0pa 11.1mm Jobber Drill Bit HSS = 7/16” Dia TL6-9LM111 $ 60 /6
TL-9LM115 $13 $6.35, 20/0pa 11.5mm Jobber Drill Bit HSS TL6-9LM115 $ 65 /6
TL-9LM120 $14 $6.88, 6/4pa 12.0mm Jobber Drill Bit HSS TL6-9LM120 $ 70 /6
TL-9LM127 $16 $8.20, 10/0pa 12.7mm Jobber Drill Bit HSS = 1/2” Dia TL6-9LM127 $ 80 /6

TL-2BS060 $34 $18, 15/0pa 6.0mm Ballnose Solid Carbide Drill Bits TL6-2BS060 $ 170 /6 Drill thru 61 Rockwell Bushes
TL-C9LM030 $4 $2.12, 40/40pa 3.0mm Jobber Drill Bits HSS (2) Carded TL6-C9LM030 $ 19 /6
TL-C9LM035 $3 $1.18, 79/1pa 3.5mm Jobber Drill Bits HSS TL6-C9LM030 $ 13 /6
TL-C9LM040 $3 $1.32, 51/34pa 4.0mm Jobber Drill Bit HSS Carded TL6-C9LM040 $ 14 /6
TL-C9LM045 $3 $1.45, 59/2pa 4.5mm Jobber Drill Bit HSS Carded TL6-C9LM040 $ 15 /6
TL-C9LM050 $4 $1.65, 41/80pa 5.0mm Jobber Drill Bit HSS Carded TL6-C9LM050 $ 16 /6

TL-C9LM055 $4 $1.93, 49/1pa 5.5mm Jobber Drill Bit HSS Carded TL6-C9LM050 $ 18 /6
TL-C9LM060 $5 $2.25, 43/80pa 6.0mm Jobber Drill Bit HSS Carded TL6-C9LM060 $ 22 /6
TL-C9LM065 $5 $2.46, 49/2pa 6.5mm Jobber Drill Bit HSS Carded TL6-C9LM060 $ 24 /6
TL-C9LM070 $6 $2.91, 29/20pa 7.0mm Jobber Drill Bit HSS Carded TL6-C9LM070 $ 28 /6
TL-C9LM075 $7 $3.49, 49/0pa 7.5mm Jobber Drill Bit HSS Carded TL6-C9LM070 $ 34 /6
TL-C9LM080 $7 $3.50, 18/50pa 8.0mm Jobber Drill Bit HSS Carded TL6-C9LM080 $ 35 /6

TL-C9LM085 $ 8 $3.97, 33/10pa 8.5mm Jobber Drill Bit HSS for M10x1.25 Tap TL6-C9LM085 $ 40 /6
TL-C9LM090 $ 9 $4.36, 22/14pa 9.0mm Jobber Drill Bit HSS Carded TL6-C9LM090 $ 48 /6
TL-C9LM100 $10 $5.28, 30/50pa 10.0mm Jobber Drill Bit HSS Carded TL6-C9LM100 $ 50 /6
TL-C9LM110 $13 $6.48, 25/8pa 11.0mm Jobber Drill Bit HSS Carded TL6-C9LM110 $ 62 /6
TL-C9LM120 $16 $8.06, 6/8pa 12.0mm Jobber Drill Bit HSS Carded TL6-C9LM120 $ 80 /6

TL-CMCHI060 $12 $6.03, 23/4pa HSS Tap 6mm Metric Coarse Intermediate TL6-CMCHI060 $ 56 /6
TL-CMCHI080 $13 $6.48, 4/12pa HSS Tap 8mm Metric Coarse Intermediate TL6-CMCHI080 $ 66 /6
TL-CMCHI100 $17 $8.78, 12/16pa HSS Tap 10mm Metric Coarse Intermediate TL6-CMCHI100 $ 81 /6
TL-CMCHI120 $26 $13.07, 6/8pa HSS Tap 12mm Metric Coarse Intermediate TL6-CMCHI120 $ 117 /6

TL-MA050085G $ 5 $2.21, 10/0pa 5.0 Dia x 85 Masonry Drill Bit - German TL6-MA050085G $ 22 /6

TL-MA060100G $ 5 $2.31, 10/0pa 6.0 Dia x 100 Masonry Drill Bit - German TL6-MA060100G $ 23 /6

TL-MA050085 $2 $0.95, 10/2pa 5.0 Dia x 85 Masonry Drill Bit TL6-MA050085 $ 9 /6

TL-MA060100 $2 $1.05, 9/2pa 6.0 Dia x 100 Masonry Drill Bit TL6-MA060100 $ 10 /6

TL-SP060110G $ 8 $3.90, 10/0pa 6.0 Dia x 110 SDS Masonry Drill Bit, German TL6-SP060110G $ 36 /6

Minimum $150
KSet applies before GST & Freight
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320
Phone
Phone 02
02 4932
4932 3530
3530 Fax:
Fax: 02
02 4932
4932 3100
3100 Email:
Email: sales@kset.com.au
sales@kset.com.au Page
Page 68
68 November
November 2013
2013
Located in the Newcastle - Sydney Region - Australia
 Hard Part Turning & Cutting

CODE Price ea Description

Ex GST
COST
TL-SE-3MDC $ 50 $30 Carbon Burr Oval 9.5mm Dia, 6 Dia Shank
TL6-SE-3MDC 7, 8pa $ 248 for pack of 6

TL-SD-3MDC $ 36 $22 Carbon Burr Ball 9.5mm Dia, 6 Dia Shank

TL6-SD-3MDC 6, 2pa $ 198 for pack of 6

TL-RNGN $ 46 $24 SANDVIK Cormorant - Turning Insert - Negative Ceramic Whisker Reinforced
TL6-RNGN 10, 2pa $ 216 for pack of 6 RNRN 12 04 00T01020 670

TL-SNGN $ 40 $27 SANDVIK Cormorant - Turning Insert - Negative Ceramic Whisker Reinforced
TL6-SNGN 9, 2pa $ 196 for pack of 6 SNGN 12 07 08T01020 670
Excellent bulk toughness. Recommended for hard part turning in unfavourable conditions

TL-N151.3-600 $110 $12 SANDVIK Cormorant - Parting Insert - Carbide - For Parting Hardened Bushes
TL6-N151.3-600 10, 2pa $ 606 for pack of 6 N151.3-600-50-7P

TL-GCDGS12510 $ 2 $1.15 Thin Cutting Disc 125 Dia x1 for Stainless

TL6-GCDS12510 169, 200pa $ 10 for pack of 6

TL-GFDGS12560 $ 7 $4 Flap Disc 125 Dia x 22.2mm for Stainless - Premium 100% Zirconia - Heavy duty backing cloth
TL6-GFDS12560 6, 90pa $ 36 for pack of 6

TL-CS Handle $ 25 $14 Countersink Handle, Black / Orange

TL6-CS Handle 6, 0pa $ 125 for pack of 6

TL-CS-20 $ 32 $21 20mm Countersink

TL6-CS-20 6, 50pa $ 160 for pack of 6

TL-300-18U $3 $1.06 Hacksaw Blade 8% Cobalt

TL6-300-18U 42, 50pa $ 12 for pack of 6

Minimum $150
KSet applies before GST & Freight
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320
Phone
Phone 02
02 4932
4932 3530
3530 Fax:
Fax: 02
02 4932
4932 3100
3100 Email:
Email: sales@kset.com.au
sales@kset.com.au Page
Page 69
69 November
November 2013
2013
Located in the Newcastle - Sydney Region - Australia
 Sterling TOOLS and MEASURING

CODE Price ea Description

Ex GST
COST
TL-DT-1-2 $9 $4 Deburring Tool Non-Replaceable Blade
20, 60pa TL6-DT-1-2 $ 42 for pack of 6

TL-ET-2 $ 18 $9 Deburring Tool Comfort Grip TakesC10Blades

10, 30pa TL6-ET-2 $ 86 for pack of 6
TL-C-10 $6 $3 Deburring Blade, Standard 3.2mm Swivel
10, 4pa TL6-C-10 $ 30 for pack of 6

TL-1521 $3 $0.87 Ruler 150mm Stainless Steel

17, 180pa TL6-1521 $ 12 for pack of 6

TL-3021 $4 $1.73 Ruler 300mm Stainless Steel

25, 90pa TL6-3021 $ 18 for pack of 6

TL-EDC150 $ 56 $22 Electronic Digital Caliper 150mm Sterling

39, 24pa TL6-EDC150 $ 248 for pack of 6

TL-COMBS53 $ 40 $19.85 Combination Square Heavy Duty

17, 10pa TL6-COMBS53 $ 192 for pack of 6

TL-389 $6 $2.84 3m Tape Measure - Tape Tech

16, 80pa TL6-389 $ 28 for pack of 6

TL-TBC50191 $ 16 $6.74 Tape Measure 5 metre Metric / Imperial

25, 40pa TL6-TBC50191 $ 76 for pack of 6

TL-KGM80271 $ 26 $12.79 Tape Measure 8m x 27mm Magnetic Hook

25, 24pa TL6-KGM80271 $ 120 for pack of 6

TL-ADJP-250 $ 28 $16.88 Pliers Self Adjusting 250mm Cr Vanadium

12, 16pa TL6-ADJP-250 $ 134 for pack of 6

TL-3056 $ 34 $14.85 Multitool 12 function Sheffield Stainless

18, 50pa TL6-3056 $ 158 for pack of 6

KSet
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au
Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page
Page 70
70 November
November 2013
2013
Located in the Newcastle - Sydney Region - Australia
 Sterling KNIVES and CUTTERS

CODE Price ea Description

Ex GST
COST
TL-112-1 $ 20 $10 Knife, Auto-Loading, Retractable
26, 90pa TL6-112-1 $ 96 for pack of six

TL-114-2R $9 $3.81 Knife Orange AutoRetractable

87, 18pa TL6-114-2R $ 36 for pack of six

TL-115-1Y $ 14 $6 Knife Yellow Retractable with 3 blades

21, 120pa TL6-115-1Y $ 68 for pack of six

TL-29-701 $ 19 $11.37 Snips Black Grips Industrial Black Panther

37, 80pa TL6-29-701 $ for pack of six
High Quality Stainless Steel - Serated edge

TL-29-702 $ 34 $19.31 Snips Red Grips Hi Tensile 185mm BlkPthr

25, 60pa TL6-29-702 $ 178 for pack of six
Hardened Stainless Steel Precision Ground
Cuts Wire Netting, Aluminium Sheet, Kevlar

TL-29-810 $ 32 $14.87 Scissors 220mm Black Panther

25, 10pa TL6-29-810 $ 148 for pack of six

TL-3044 $ 14 $6.90 Pocket Knife 4 inch Stainless Steel

24, 60pa TL6-3044 $ 68 for pack of six

TL-3035 $ 20 $9.15 SportsPro Multi Knife

22, 48pa TL6-3035 $ 98 for pack of six

TL-806 $3 $1.26 Office Scissors, 215mm Tortoise Shell

185, 160pa TL6-806 $ 13 for pack of six

TL-68 $3 $1.26 Cutter 18mm, Yellow Plastic Metal Insert

229, 60pa TL6-68 $ 13 for pack of six

TL-905-1 $3 $1.40 Cutter 9mm, Auto Lock Yellow Plastic

69, 150pa TL6-905-1 $ 14 for pack of six

TL-921-4D $5 $30 Knife Blades - Dispenser of 10

25, 8pa To Suit TL-112-1 TL-114-2R TL-115-1Y
TL6-921-4D $ 68 for six Dispensers

Minimum $150
KSet applies before GST & Freight
KSet Engineering
Engineering Pty
Pty Ltd
Ltd 3333 Johnson
Johnson Street
Street Maitland
Maitland NSW
NSW 2320
2320
Phone
Phone 02
02 4932
4932 3530
3530 Fax:
Fax: 02
02 4932
4932 3100
3100 Email:
Email: sales@kset.com.au
sales@kset.com.au Page
Page 71
71 November
November 2013
2013
Located in the Newcastle - Sydney Region - Australia
 Wear Life of Pin Materials

4140 Hardened & Tempered 29 Rockwell C

as available from steel merchants

K1045 - INDUCTION HARDENED 58 Rockwell C

58 Rockwell C (615 Brinell) resists wear about 10 times better and longer than 29 Rockwell C

4140 - INDUCTION HARDENED 58 Rockwell C - Very Resistant to Breakage

58 Rockwell C (615 Brinell) resists wear about 12 times better and longer than 29 Rockwell C

The Largest Range of Hardened & Ground Steel Bushes in Australia

Induction Hardened Pins & Pin Steel - In Stock
TERMS AND CONDITIONS OF SALE:
NET PAYMENT WITH ORDER. GOODS WILL NOT BE DISPATCHED BEFORE PAYMENT IS RECEIVED

PAYMENTS: Cheques: To approved customers only. Cash: Correct amount only

MasterCard and Visa Cards accepted. No Transaction Fee is charged on sales under $1,000
Electronic Transfers to: KSet Engineering Pty Ltd BSB: 06 2813 Account No.: 1038 8155
TITLE does not pass to purchaser until Payment has been received in FULL

COUNTER SALES: By APPOINTMENT ONLY Between 8:30am-12:30 midday

KSet Engineering Pty Ltd is a Manufacturing Wholesaler, Not a Retail Shop
Minimum Counter Sale is $240 plus GST
RESTOCKING FEE: 16% or $50 Minimum No credit is given for goods returned after 14 days from invoice
or without KSet Management consent, nor for goods that have been fitted
If not in original wrapped condition, Re-Wrapping charges may apply
7 DAY ACCOUNTS May be extended to customers who have traded satisfactorily, with a Credit Limit at our discretion
Non-Supply is also at our discretion should trading exceed 21 days
DISTRIBUTOR ACCOUNTS: 30 DAYS
Trading must exceed $20,000 p.a. and a minimum of 2 invoices per month. Credit limit at our discretion
Trading automatically suspended if account is outstanding 32 days from end of month following invoice
FREIGHT All goods are carried by KSet Engineering preferred major freight companies at competitive prices
Freight, Plus Packing, Handling, Insurance are included on invoice as two separate items.

F Codes for Freight Plus P Codes for Packing, Handling, Insurance:

F3 3kg Airbag $16 PB1 Airbag $12

F5 5kg Airbag $26 PB2 2 Bags $17
FB Fastways Blue Label Newcastle $9 PC1 HD Carton $14
FL Lime label Sydney Region $13 PC2 2 HD Cartons $22
FNT Northern Territory / Remote Surcharge $20 PSK Small skid $21
FR Road Freight via Star Track POA PMS Medium skid $25
PPT Pallet $37
PFastC1 1 Carton Fastways Freight Forward $13
ONFORWARDING:
FM Manual Consignment Charge $15 Plus The same Packing, Handling item is applied
When goods are sent “freight on”, they are NOT INSURED, and purchaser assumes ALL RISK.

KSet Engineering Pty Ltd 33 Johnson Street Maitland NSW 2320

Phone 02 4932 3530 Fax: 02 4932 3100 Email: sales@kset.com.au Page 72 November 2013
Located in the Newcastle - Sydney Region - Australia