Scribd
Upload
55 views1 page

Drawing For Eye Wash - Commented

All eye washers and safety showers must undergo hydrostatic testing at 1.5 times the design pressure of 9.29 Kg/cm2 g. Safety shower and eye wash facilities must comply with ASME Z3581, and specific installation requirements for valves and pipes are outlined. Metal tags indicating size and item tags are required for identification.

Uploaded by

geoanburaja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views1 page

Drawing For Eye Wash - Commented

All eye washers and safety showers must undergo hydrostatic testing at 1.5 times the design pressure of 9.29 Kg/cm2 g. Safety shower and eye wash facilities must comply with ASME Z3581, and specific installation requirements for valves and pipes are outlined. Metal tags indicating size and item tags are required for identification.

Uploaded by

geoanburaja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Notes

ALL EYE WASHER & SAFETY SHOWER SHALL BE HYDROSTATIC TESTED AT 1.5 TIMES THE DESIGN PRESSURE.
DESIGN PRESSURE - 9.29 (Kg / cm2 g)

S.M. ITEM TO HAVE METAL TAG WIRED OR WELDED ON, INDICATING SIZE & S.M. ITEM TAG.

SAFETY SHOWER & EYE WASH FACILITIES COMPLY WITH ASME Z3581.
1" NPT Female SS ball valve
NOZZLE TO BE WELDED AT SITE AS PER THE SHOWER POSITION.

1-1/4” NPT MALE.

80mm dia. SCH-STD WT, CS HOT DIP GALVANISED CS PIPE,ASTM A53 GR.B,
ASME B 36.10M, ONE END NPTM
1 / 2" NPT FEMALE

80mm dia. CS ASTM A105 HOT DIP GALVANISED, THREDED FLANGE, CL150, NPTF,
ASME B 16.5SS WITH (4) 7/16” DIA. MOUNTING HOLES ON 4” CENTERS WITH
MOUNTING BOLTS

8"
7 7/8" X 12"

1 / 2" NPT FEMALE

1" NPT Female SS ball valve

Add item Tag No.

You might also like