MEMORY
SEGMENTATION OF
INTEL 8086
Engr. M.Zakir Shaikh
Star Laureate Science and Technology
Visiting Faculty I.B.T LUMHS
Research Associate Merhan UET
1
Memory Segmentation
⦿ The total memory size is divided into
segments of various sizes.
⦿ A segment is just an area in memory.
⦿ The process of dividing memory this
way is called Segmentation.
2
Memory Segmentation
⦿ In memory, data is stored as bytes.
⦿ Each byte has a specific address.
⦿ Intel 8086 has 20 lines address bus.
⦿ With 20 address lines, the memory that can
be addressed is 220 bytes.
⦿ 220 = 1,048,576 bytes (1 MB).
⦿ 8086 can access memory with address
ranging from 00000 H to FFFFF H.
3
Memory Segmentation
⦿ In 8086, memory has four different types
of segments.
⦿ These are:
⚫ Code Segment
⚫ Data Segment
⚫ Stack Segment
⚫ Extra Segment
4
Segment Registers
⦿ Each of these segments are addressed by
an address stored in corresponding
segment register.
⦿ These registers are 16-bit in size.
⦿ Each register stores the base address
(starting address) of the corresponding
segment.
⦿ Because the segment registers cannot
store 20 bits, they only store the upper 16
bits.
5
Segment Registers
6
Segment Registers
⦿ How is a 20-bit address obtained if there are only
16-bit registers?
⦿ The answer lies in the next few slides.
⦿ The 20-bit address of a byte is called its Physical
Address.
⦿ But, it is specified as a Logical Address.
⦿ Logical address is in the form of:
Base Address : Offset
⦿ Offset is the displacement of the memory location
from the starting location of the segment.
7
Example
⦿ The value of Data Segment Register
(DS) is 2222 H.
⦿ To convert this 16-bit address into
20-bit, the BIU appends 0H to the LSBs
of the address.
⦿ After appending, the starting address of
the Data Segment becomes 22220H.
8
Example (Contd.)
⦿ If the data at any location has a logical
address specified as:
2222 H : 0016 H
⦿ Then, the number 0016 H is the offset.
⦿ 2222 H is the value of DS.
9
Example (Contd.)
⦿ To calculate the effective address of the
memory, BIU uses the following formula:
⦿ Effective Address = Starting Address of
Segment + Offset
⦿ To find the starting address of the
segment, BIU appends the contents of
Segment Register with 0H.
⦿ Then, it adds offset to it.
10
Example (Contd.)
⦿ Therefore:
⦿ EA = 22220 H
+ 0016 H
------------
22236 H
11
Example (Contd.)
2222 H BYTE – 0 22220 H
DS Register BYTE – 1
BYTE – 2
-
Offset = 0016 H -
-
-
-
Addressed Byte 22236 H
12
Max. Size of Segment
⦿ All offsets are limited to 16-bits.
⦿ It means that the maximum size
possible for segment is 216 = 65,535
bytes (64 KB).
⦿ The offset of the first location within the
segment is 0000 H.
⦿ The offset of the last location in the
segment is FFFF H.
13
Where to Look for the Offset
Segment Offset Registers Function
CS IP Address of the next instruction
DS BX, DI, SI Address of data
SS SP, BP Address in the stack
ES BX, DI, SI Address of destination data
(for string operations)
14
Question
⦿ The contents of the following registers are:
⦿ CS = 1111 H
⦿ DS = 3333 H
⦿ SS = 2526 H
⦿ IP = 1232 H
⦿ SP = 1100 H
⦿ DI = 0020 H
⦿ Calculate the corresponding physical addresses for
the address bytes in CS, DS and SS.
15
Solution
1. CS = 1111 H
⦿ The base address of the code segment is 11110 H.
⦿ Effective address of memory is given by 11110H + 1232H = 12342H.
2. DS = 3333 H
⦿ The base address of the data segment is 33330 H.
⦿ Effective address of memory is given by 33330H + 0020H = 33350H.
3. SS = 2526 H
⦿ The base address of the stack segment is 25260 H.
⦿ Effective address of memory is given by 25260H + 1100H = 26350H.
16
Thank
You
Have a Nice Day
17
