Buy APC Smart-UPS RT 5000VA 230V - Technical Specifications and I... http://www.apc.com/products/resource/include/techspec_index.cfm?ba...

You are here: Home > Products > Uninterruptible Power Supply (UPS) > Smart-UPS On-Line

APC Smart-UPS RT 5000VA 230V

Part Number: SURTD5000XLI

Technical Specifications Product Overview Documentation Software & Firmware Options Ratings and Reviews

Output
Output Power Capacity 3500 Watts / 5000 VA

Max Configurable Power 3500 Watts / 5000 VA

Nominal Output Voltage 230V

Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage

Efficiency at Full Load 92.0%

Output Voltage Distortion Less than 3%

Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1

Other Output Voltages 220, 240

Crest Factor 3:1

Topology Double Conversion Online

Waveform Type Sine wave

Output Connections (8) IEC 320 C13

(2) IEC 320 C19

(4) IEC Jumpers

Bypass Internal Bypass (Automatic and Manual)

Input
Nominal Input Voltage 230V

Input Frequency 50/60 Hz +/- 5 Hz (auto sensing)

1 von 4 31.07.2014 15:56

Buy APC Smart-UPS RT 5000VA 230V - Technical Specifications and I... http://www.apc.com/products/resource/include/techspec_index.cfm?ba...

Input Connections Hard Wire 3-wire

Input voltage range for main 160 - 280V

operations

Input voltage adjustable range for 100 - 280V

mains operation

Other Input Voltages 220, 240

Batteries & Runtime

Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Included Battery Modules 2

Typical recharge time 2.50 hour(s)

Replacement Battery RBC44

RBC™ Quantity 1

Extended Run Options APC Smart-UPS RT 5000VA 230V

Runtime Graph

Curve Part Number(s)

A SURTD5000XLI

SURTD5000XLI
B
+ (1)SURT192XLBP

SURTD5000XLI
C
+ (2)SURT192XLBP

SURTD5000XLI
D
+ (3)SURT192XLBP

SURTD5000XLI
E
+ (4)SURT192XLBP

Hover over the line on the graph above to view the runtime at any desired load

Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical
environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.

View Enlarged Graph View Runtime Chart

2 von 4 31.07.2014 15:56

Buy APC Smart-UPS RT 5000VA 230V - Technical Specifications and I... http://www.apc.com/products/resource/include/techspec_index.cfm?ba...

Communications & Management

Interface Port(s) RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot

Pre-Installed SmartSlot™ Cards AP9631

Control panel LED status display with load and battery bar-graphs and On Line : On Battery : Replace
Battery : Overload and Bypass Indicators

Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Emergency Power Off (EPO) Yes

Surge Protection and Filtering

Surge energy rating 555J Joules

Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response
time : meets UL 1449

Physical
Maximum Height 432.00 mm

Maximum Width 130.00 mm

Maximum Depth 660.00 mm

Rack Height 3U

Net Weight 54.55 KG

Shipping Weight 63.64 KG

Shipping Height 347.00 mm

Shipping Width 603.00 mm

Shipping Depth 980.00 mm

Master Carton Units 1.00

Color Black

Units per Pallet 6.00

Environmental
Operating Environment 0 - 40 °C

Operating Relative Humidity 0 - 95% no%

Operating Elevation 0-3000 meters

Storage Temperature -15 - 45 °C

Storage Relative Humidity 0 - 95% no%

Storage Elevation 0-15000 meters

Audible noise at 1 meter from surface 55.00 dBA

of unit

Online Thermal Dissipation 1057.00 BTU/hr

Protection Class IP 20

Conformance
Regulatory Approvals C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, EN 61000-3-2,
GOST, UL 1778, VDE

Standard Warranty 2 years repair or replace, optional on-site warranties available, optional extended
warranties available

3 von 4 31.07.2014 15:56

Buy APC Smart-UPS RT 5000VA 230V - Technical Specifications and I... http://www.apc.com/products/resource/include/techspec_index.cfm?ba...

Sustainable Offer Status

RoHS Compliant

**The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.

4 von 4 31.07.2014 15:56