Scribd
Upload
386 views2 pages

Basic Electrical Inspection

This inspection record documents the basic inspection of electrical equipment for a client's project. It lists the items to be inspected, including comparing nameplate information to records and establishing equipment identification, location, and protection ratings. The inspection checks that labeling is correct, there are no unauthorized modifications, enclosures and seals are satisfactory, bolts and glands are tight, and there is no damage or corrosion. Spaces are provided to record inspection results and any needed remedial actions. Company representatives must sign off to accept the inspection findings.

Uploaded by

Amit Saxena
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
386 views2 pages

Basic Electrical Inspection

This inspection record documents the basic inspection of electrical equipment for a client's project. It lists the items to be inspected, including comparing nameplate information to records and establishing equipment identification, location, and protection ratings. The inspection checks that labeling is correct, there are no unauthorized modifications, enclosures and seals are satisfactory, bolts and glands are tight, and there is no damage or corrosion. Spaces are provided to record inspection results and any needed remedial actions. Company representatives must sign off to accept the inspection findings.

Uploaded by

Amit Saxena
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Inspection Record for Basic Inspection of Electrical Equipment

Client: Project No.: Project Name:

Record No.: page 1 of 2

Subcontractor: Subcontract P.O. No.: Item No.:

Additional Information: Type of Equipment: Manufacturer: P.O. No.: Location: Unit No.: Reference Document: Subcontractor inspected initials/date 1.0 Compare nameplate information with equipment record. Note any deviations under remarks 2.0 2.1 2.2 2.3 Establish and record the following: Equipment/circuit identification Area classification Type of Ex-protection/gas group/ temperature class 2.4 2.5 2.6 3.0 Type of enclosure protection Electrical protection setting/rating Actual maximum load/ammeter reading Check the following items and report any deviations/defects under remarks: 3.1 3.2 3.3 3.4 Labelling correct No unauthorized modifications Enclosures and glasses satisfactory Seals and gaskets satisfactory
Attachments, No. of pages:

Registration No.: System Voltage: Size/Rating:

Items to inspect

Company Hold Point inspected* initials/date

Remarks

H - Companys presence is mandatory for all activities in section. h - Companys presence is mandatory.

Accepted for Subcontractor


Name: Signature: Date:

Accepted for Company


Name: Signature:

Accepted for Client


Name: Signature:


*Company only initials for holdpoint

Date:

Date:

C:\RB_Forms\RB26E09.DOT\

www.red-bag.com

Inspection Record for Basic Inspection of Electrical Equipment


Client: Project No.: Project Name:

Record No.: page 2 of 2

Subcontractor: Subcontract P.O. No.: Item No.:

Additional Information: Type of Equipment: Manufacturer: P.O. No.: Location: Unit No.: Reference Document: Subcontractor inspected initials/date 3.5 3.6 3.7 3.8 Bolts and glands complete and tight No undue accumulation of dust and dirt No leakage of oil/compound No damage to above ground part of connected cables 3.9 Adequate protection of equipment and cables against corrosion. the weather, vibrations and other adverse factors 3.10 Motor fans and couplings not rubbing on cowls/guards 3.11 Earthing in good condition 3.12 Oil levels in sight glasses correct 3.13 Padlock facilities correct 3.14 Silicagel in breathers satisfactory 4.0 Remedial action completed Hold Point Company inspected* initials/date Remarks Registration No.: System Voltage: Size/Rating:

Items to inspect

H - Companys presence is mandatory for all activities in section. h - Companys presence is mandatory.

Attachments, No. of pages:

Accepted for Subcontractor


Name: Signature: Date:

Accepted for Company


Name: Signature:

Accepted for Client


Name: Signature:


*Company only initials for holdpoint

Date:

Date:

C:\RB_Forms\RB26E09.DOT\

www.red-bag.com

You might also like