Scribd
Upload
17 views2 pages

L22-369 Testing

Perry Johnson Laboratory Accreditation, Inc. has accredited Servicio Industrial de Calibración SIDEC México, S.A. de C.V. in accordance with ISO/IEC 17025:2017 for its technical competence in dimensional inspection. The accreditation is valid from May 14, 2022, to June 30, 2024, and covers specific calibrations for various items and materials as detailed in the certificate. Ongoing assessments are required to maintain the validity of this accreditation.

Uploaded by

atsidec
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views2 pages

L22-369 Testing

Perry Johnson Laboratory Accreditation, Inc. has accredited Servicio Industrial de Calibración SIDEC México, S.A. de C.V. in accordance with ISO/IEC 17025:2017 for its technical competence in dimensional inspection. The accreditation is valid from May 14, 2022, to June 30, 2024, and covers specific calibrations for various items and materials as detailed in the certificate. Ongoing assessments are required to maintain the validity of this accreditation.

Uploaded by

atsidec
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PERRY JOHNSON LABORATORY

ACCREDITATION, INC.

Certificate of Accreditation
Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of:

Servicio Industrial de Calibración SIDEC México, S.A. de C.V.


Calle Fernando Montes de Oca # 848, Colonia Latinoamericana
Saltillo, Coahuila, México C.P. 25270

(Hereinafter called the Organization) and hereby declares that Organization is accredited
in accordance with the recognized International Standard:

ISO/IEC 17025:2017

This accreditation demonstrates technical competence for a defined scope and the
operation of a laboratory quality management system
(as outlined by the joint ISO-ILAC-IAF Communiqué dated April 2017):

Dimensional Inspection
(As detailed in the supplement)

Accreditation claims for such testing and/or calibration services shall only be made from addresses referenced within this certificate.
This Accreditation is granted subject to the system rules governing the Accreditation referred to above, and the Organization hereby
covenants with the Accreditation body’s duty to observe and comply with the said rules.

For PJLA:

Initial Accreditation Date: Issue Date: Expiration Date:


March 30, 2012 May 14, 2022 June 30, 2024

Accreditation No.: Certificate No.:


Tracy Szerszen
President 55366 L22-369

Perry Johnson Laboratory


Accreditation, Inc. (PJLA)
755 W. Big Beaver, Suite 1325 The validity of this certificate is maintained through ongoing assessments based
Troy, Michigan 48084 on a continuous accreditation cycle. The validity of this certificate should be
confirmed through the PJLA website: www.pjlabs.com

Page 1 of 2
Certificate of Accreditation: Supplement
Servicio Industrial de Calibración SIDEC México, S.A. de C.V.
Calle Fernando Montes de Oca #848, Colonia Latinoamericana
Saltillo, Coahuila, México. C.P. 25270
Contact Name: Yesenia González Treviño Phone: 844-149-1305

Accreditation is granted to the facility to perform the following calibrations:

FIELD ITEMS, MATERIALS SPECIFIC TESTS OR SPECIFICATION, RANGE (WHERE


OF TEST OR PRODUCTS PROPERTIES STANDARD METHOD APPROPRIATE) AND
TESTED MEASURED OR TECHNIQUE USED DETECTION LIMIT
Dimensional Fixtures, Gages, GD&T ASME Y14.5 X = 1 800 mm
InspectionF Tooling, Matrices PCMM Y = 1 800 mm
for Foundry or Z = 1 200 mm
Plastic Injection ASME Y 14.5 X= 800 mm
CMM Y= 900 mm
Z= 550 mm
ASME Y 14.5 X= 200 mm
Optical Comparator Y= 100 mm

1. The presence of a superscript F means that the laboratory performs testing of the indicated parameter at its
fixed location. Example: Outside Micrometer F would mean that the laboratory performs this testing at its
fixed location.

Issue 05/2022 This supplement is in conjunction with certificate #L22-369 Page 2 of 2

You might also like