SAUDI ARAMCO ID/PIEU-31-Jul-2022 - REV.2022.07.
00 (Standards Cutoff - July 31,2022) Rev 81 31-Jul-22
SAIC NUMBER DATE APPROVED QR NUMBER
SAUDI ARAMCO INSPECTION CHECKLIST
Receiving Inspection of Internal Coating Materials for Over-
SAIC-H-2058 31-Jul-22 COAT-
the-Ditch Field Girth Welds
PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR
EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.
LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.
SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
SAUDI ARAMCO USE ONLY
SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?
SAUDI ARAMCO INSPECTION LEVEL CONTRACTOR INSPECTION LEVEL
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.
A General Requirements
Only approved products shall be used. If the approved coating is
manufactured in a different manufacturing facility, it should be requalified SAES-H-002,
A1
even when it is manufactured by the same company. If its name or Para. 6
reference number is changed, it should also be requalified.
Girth weld coating application shall be performed only by vendors SAES-H-201,
A2
qualified by CSD. Para. 7.2
The coating system for specific service are selected from the SAES-H-002,
A3
various SAP Material Numbers specified in APCS-117 and APCS-118. Para. 5.3
For potable water service, the coating are certified by FDA, NSF or
SAES-H-002,
A4 equivalent.
Para. 5.2.2
Note: The certificate shall be renewed every 5 years .
Surface preparation shall be done by the Contractor, unless otherwise
SAES-H-201,
A5 specified in the scope of work. Pipe bung shall be used to protect shop-
Para. 8.2.5
applied pipe coating.
Powder/liquid coating materials supplied to the Vendor shall be certified
by Manufacturer with the following information, which must meet initially
approved material:
a) The Manufacturer's name
b) Product description
SAES-H-201
c) Mass or density of material
A6 Section 6.9 &
d) The material identification number
Section 4
e) The batch number
f) Date of manufacture
g) Location of manufacturing
h) Temperature required for transportation and storage
i) The shelf life (or expiration date)
j) Material identification fingerprints
B Specific Requirements
Each batch of FBE coating shall be tested and certified by the
Manufacturer in accordance with the requirement of Table 1. Vendor shall SAES-H-201,
B1
conduct the same tests to verify compliance with the requirements. (See Para. 6.10
Table I - Epoxy Powder Properties at SAES-H-201)
Packaging and labeling requirements for liquid and paste coatings and
SAES-H-201,
B2 related solvents and curing agents shall be in strict accordance with 09-
Para. 6.8
SAMSS-060.
Saudi Aramco: Company General Use
Pipes shall be stored and handled in strict adherence with the SAES-H-201,
B3
requirements in SAES-H-200 Para. 6.1
6.2 Coating material shall be stored and handled in accordance with the
Manufacturer's recommendations.
SAES-H-201,
B4
Para. 6.2 & 6.3
6.3 Powder shall be transported and stored in sealed container that
prevent the ingress of moisture or water.
Powder shall be kept dry at all times and not exposed to direct sunlight or SAES-H-201,
B5
used within 15 m of any source of ignition. Para. 6.4
Vendor shall load only enough materials to be used in the same day.
SAES-H-201,
B6 Opened, unused powder shall not be used. Similarly, liquid coatings shall
Para. 6.6
be usedwithin their pot life time, and excess/unused quantities discarded.
Surface preparation shall be done by the Contractor, unless otherwise
specified in the scope of work. Pipe bung shall be used to protect shop-
SAES-H-201,
B7 applied pipe coating.
Para. 8.2.5 & 6.7
The Vendor shall use only Saudi Aramco approved products.
Remarks:
REFERENCE DOCUMENTS:
1 SAES-H-201: General Specifications for External and Internal FBE Coatings of Pipeline Field Girth Welds (31 March 2020)
2. SAES-H-002 Internal and External Coatings for Steel Pipelines and Piping (22 February 2018)
Contractor / Third-Party Saudi Aramco
Construction Representative* PMT Representative
Work is Complete and Ready for Inspection: T&I Witnessed QC Record Reviewed Work Verified
Name, Initials and Date: Name, Initials and Date:
QC Inspector PID Representative
Performed Inspection Work / Rework May Proceed T&I Witnessed QC Record Reviewed Work Verified
Name, Initials and Date: Name, Initials and Date:
QC Supervisor Proponent and Others
Quality Record Approved: T&I Witnessed QC Record Reviewed Work Verified
Name, Organization,
Name, Sign and Date:
Initials and Date:
*Person Responsible for Completion of Quality Work / Test Y = YES N = NO F = FAILED
Saudi Aramco: Company General Use
