Series 219
SMD DIP Switch
Removable tape seal to withstand IR vapor phase or
wave soldering temperatures, and board washing
Gull-wing and “J”bend terminal configurations
Available low profile, medium, and extended height
actuators
SPST configuration available
0.6mm/.024” actuator travel
Optional top tape seal for board spray washing
Description
Positive detent separated from contactor causes contactor does not deflect during actuation. Unique compact
type design allows to be used at small size application. Optional top tape sealed structure is optimized for board
washing during soldering process. It makes it the ideal choice for any server, security and HVAC systems.
Ordering Information
Number of Actuator B Bottom Top Tape Terminal Packaging Actuation
Series Switch Positions Height Seal Seal Type Type Preset
219- 12 LP S T J R F
No. of switch Code Top tape seal
Code positions Blank No top tape seal Code Spec.
2 2 positions Top tape seal (Not
Blank Anti-static tube packaging
3 3 positions T available on extended
R Tape & reel packaging
4 4 positions actuator
5 5 positions
6 6 positions
7 7 positions
8 8 positions Code Spec. Code Spec.
9 9 positions Extended height actuator Blank Gull wing terminal
E
10 10 positions (0.6mm/.024”) J J bend terminal
12 12 positions Medium actuator
M
(0.25mm/.010”)
LP Low profile (Flush)
Code Spec.
Blank Ship at ON position
F Ship at OFF position
Notes: Contact CTS for other common features not listed.
2021-3-12 Rev. C Page 1 of 7
©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 219
SMD DIP Switch
Electrical Specifications
Parameter Conditions & Remarks Min Max Unit
Circuit SPST 2 12 position
Initial 25
Contact Resistance milliohms
At end of life 50
Insulation Resistance Between insulated terminals 1000 megohms
500 VAC between adjacent
Dielectric Strength 1 minute
switches
100mA @ 20 VDC
Actuation Life 2,000 cycles
0.1mA @ 5 VDC (dry circuit)
Between adjacent closed
Switch Capacitance 5 pF
switches
100 mA
Nonswitching Rating or or
50 VDC
Mechanical and Environmental
Soldering Maximum reflow temperature, 250°C for 30 seconds
MSL Level 1
RoHS Lead-Free. Fully compliant to RoHS Directive 2011/65/EU
Per MIL-STD-202F, method 213B, condition A( 50G’s)
Shock
with no contact inconsistencies greater than 1 microsecond
Per MIL-STD-202F, method 204D, condition B ( .06” or 15G’s between 10 HZ to 2K HZ) with
Vibration
no contact inconsistencies greater than 1 microsecond
Coplanarity 0.1mm/.004” maximum
Bottom epoxy seal standard
Seal
Top tape seal optional
Marking Special marking available-consult CTS
Standard anti-static tube packaging
Packaging:
Optional tape and reel packaging
Operating Temperature
-55°C to +85°C
Range
Storage Temperature
-55°C to +85°C
Range
Soldering Profile
2021-3-12 Rev. C Page 2 of 7
©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 219
SMD DIP Switch
Mechanical Specifications
Figure 1 – Surface Mount J Bend Terminal
2021-3-12 Rev. C Page 3 of 7
©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 219
SMD DIP Switch
Figure 2 – Surface Mount Gull Wing Terminal
Packing: Tape and Reel
Unit: mm
SW Section F Fig Bo W F SO
2 I 7.50 16.0 7.5 -
3 I 10.00 16.0 7.5 -
4 I 12.50 24.0 11.5 -
5 I 15.10 24.0 11.5 -
6 I 17.60 24.0 11.5 -
7 II 20.20 32.0 14.2 28.4
8 II 22.70 44.0 20.2 40.4
9 II 25.22 44.0 20.2 40.4
10 II 27.80 44.0 20.2 40.4
12 II 32.90 44.0 20.2 40.4
2021-3-12 Rev. C Page 4 of 7
©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 219
SMD DIP Switch
SPECIFIED REEL PARTS DIMENSIONS:
Unit: mm
SW Section F W1 W2 W3
2~3 16.4 22.4 MAX. 15.9 MIN./19.5 MAX.
4~6 24.4 30.4 MAX. 23.9 MIN./27.4 MAX.
7 32.4 38.4 MAX. 31.9 MIN./35.4 MAX.
8~12 44.4 50.4 MAX. 43.9 MIN./47.4 MAX.
W3 ( INCLUDES FLANGE DISTORTION
AT OUTER EDGE)
W2 ( MEASURED AT HUB )
100
330
W1 ( MEASURED AT HUB )
2021-3-12 Rev. C Page 5 of 7
©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 219
SMD DIP Switch
1. TAPE SPROCKET HOLE PITCH : 4.0 ± 0.1MM
2. ALL SMT ASSEMBLING MACHINES WILL PICK-UP THE COMPONENT FROM THE
POINT, WHICH
3. IS LOCATED IN THE CENTRE OF TWO ADJACENT SPROCKET HOLES IN
FEEDING DIRECTION. THIS MUST BE TAKEK INTO ACCOUNT WHEN DESIGNING
THE LOCATION OF THE COMPONENT IN T&R POCKET.
4. RECOMMENDED PART ORIENTATION IN TAPE & REEL POCKET.
ORIENT SWITCH TERMINAL #1 TO THE SIDE OF ROUND SPROCKET HOLES, SEE
PICTURE BELOW.
LENGTH OF TAPE
5. THERE SHALL BE A LEADER OF 390mm MINIMUM WHICH IS SEALED ONTO
EMPTY CARRIER TAPE, SEE PICTURE BELOW.
FEEDING DIRECTION
2021-3-12 Rev. C Page 6 of 7
©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 219
SMD DIP Switch
2021-3-12 Rev. C Page 7 of 7
©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
